A design method for indirect iterative learning control based on two-dimensional generalized predictive control algorithm

Indirect iterative learning control (ILC) facilitates the application of learning-type control strategies to the repetitive/batch/periodic processes with local feedback control already. Based on the two-dimensional generalized predictive control (2D-GPC) algorithm, a new design method is proposed in this paper for an indirect ILC system which consists of a model predictive control (MPC) in the inner loop and a simple ILC in the outer loop. The major advantage of the proposed design method is realizing an integrated optimization for the parameters of existing feedback controller and design of a simple iterative learning controller, and then ensuring the optimal control performance of the whole system in sense of 2D-GPC. From the analysis of the control law, it is found that the proposed indirect ILC law can be directly obtained from a standard GPC law and the stability and convergence of the closed-loop control system can be analyzed by a simple criterion. It is an applicable and effective solution for the application of ILC scheme to the industry processes, which can be seen clearly from the numerical simulations as well as the comparisons with the other solutions.     

Iterative learning control for uncertain systems: Noncausal finite time interval robust control design

In this paper, we present a novel robust Iterative Learning Control (ILC) control strategy that is robust against model uncertainty as given by an additive uncertainty model. The design methodology hinges on ??_∞ optimization, but formulated such that the obtained ILC controller is not restricted to be causal, and inherently operates on a finite time interval. Optimization of the robust ILC (R‐ILC) solution is accomplished for the situation where any information about structure in the uncertainty is discarded, and for the situation where the information about the structure in the uncertainty is explicitly taken into account. Subsequently, the convergence and performance properties of resulting R‐ILC controlled system are analyzed. On an experimental set‐up, we show that the presented R‐ILC control strategy can outperform an existing linear‐quadratic norm‐optimal ILC approach and an existing causal R‐ILC approach based on frequency domain ??_∞ synthesis. Copyright © 2010 John Wiley & Sons, Ltd.     

Robust design of iterative learning control for a batch process described by 2D Roesser system with packet dropouts and time‐varying delays

Batch process, working as a best choice for low‐volume and high‐value products in manufacturing, has been widely used in chemical industries. The actuator faults and time delays often occur in practical production. This paper develops an iterative learning control (ILC) design for a batch process described by two‐dimensional (2D) Roesser system with packet dropouts and time‐varying delays. The phenomenon of actuator faults is regarded as an arbitrary stochastic sequence satisfying the Bernoulli random binary distribution. Firstly, the ILC design for a batch process is transformed into stability analysis for a 2D stochastic system with time‐varying delays. Secondly, for analyzing the stability of 2D stochastic systems, we derive the stability condition in terms of linear matrix inequality. Then, we give a procedure to get the control gain for the ILC design. An injection modeling process as an example with simulations in different cases of data dropout is given to demonstrate the validity of the proposed method. Furthermore, the proposed method has a better result by comparing the existing methods.     

Formation control for multi‐agent systems through an iterative learning design approach

This paper deals with formation control problems for multi‐agent systems by using iterative learning control (ILC) design approaches. Distributed formation ILC algorithms are presented to enable all agents in directed graphs to achieve the desired relative formations perfectly over a finite‐time interval. It is shown that not only asymptotic stability but also monotonic convergence of multi‐agent formation ILC can be accomplished, and the convergence conditions in terms of linear matrix inequalities can be simultaneously established. The derived results are also applicable to multi‐agent systems that are subject to stochastic disturbances and model uncertainties. Furthermore, the feasibility of convergence conditions and the effect of communication delays are discussed for the proposed multi‐agent formation ILC algorithms. Simulation results are given for uncertain multi‐agent systems to verify the theoretical study. Copyright © 2012 John Wiley & Sons, Ltd.     

H∞ fuzzy control design of discrete‐time nonlinear active fault‐tolerant control systems

This paper is concerned with the problem of H_∞ fuzzy controller synthesis for a class of discrete‐time nonlinear active fault‐tolerant control systems (AFTCSs) in a stochastic setting. The Takagi and Sugeno (T–S) fuzzy model is employed to exactly represent a nonlinear AFTCS. For this AFTCS, two random processes with Markovian transition characteristics are introduced to model the failure process of system components and the fault detection and isolation (FDI) decision process used to reconfigure the control law, respectively. The random behavior of the FDI process is conditioned on the state of the failure process. A non‐parallel distributed compensation (non‐PDC) scheme is adopted for the design of the fault‐tolerant control laws. The resulting closed‐loop fuzzy system is the one with two Markovian jump parameters. Based on a stochastic fuzzy Lyapunov function (FLF), sufficient conditions for the stochastic stability and H_∞ disturbance attenuation of the closed‐loop fuzzy system are first derived. A linear matrix inequality (LMI) approach to the fuzzy control design is then developed. Moreover, a suboptimal fault‐tolerant H_∞ fuzzy controller is given in the sense of minimizing the level of disturbance attenuation. Finally, a simulation example is presented to illustrate the effectiveness of the proposed design method. Copyright © 2008 John Wiley & Sons, Ltd.     

Network‐based H∞ control for stochastic systems

This paper investigates the problem of network‐based control for stochastic plants. A new model of stochastic time‐delay systems is presented where both network‐induced delays and packet dropouts are taken into consideration for a sampled‐data network‐based control system. This model consists of two successive delay components in the state, and we solve the network‐based H_∞ control problem based on this model by a new stochastic delay system approach. The controller design for the sampled‐data systems is carried out in terms of linear matrix inequalities. Finally, we illustrate the methodology by applying these results to an air vehicle control problem. Copyright © 2008 John Wiley & Sons, Ltd.     

Sampled‐data H∞ control for networked systems with random packet dropouts

This paper is concerned with the H_∞ control problem for networked control systems (NCSs) with random packet dropouts. The NCS is modeled as a sampled‐data system which involves a continuous plant, a digital controller, an event‐driven holder and network channels. In this model, two types of packet dropouts in the sensor‐to‐controller (S/C) side and controller‐to‐actuator (C/A) side are both considered, and are described by two mutually independent stochastic variables satisfying the Bernoulli binary distribution. By applying an input/output delay approach, the sampled‐data NCS is transformed into a continuous time‐delay system with stochastic parameters. An observer‐based control scheme is designed such that the closed‐loop NCS is stochastically exponentially mean‐square stable and the prescribed H_∞ disturbance attenuation level is also achieved. The controller design problem is transformed into a feasibility problem for a set of linear matrix inequalities (LMIs). A numerical example is given to illustrate the effectiveness of the proposed design method. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Quantized Iterative Learning Control Design For Linear Systems Based On A 2‐D Roesser Model

This paper considers the problem of iterative learning control design for linear systems with data quantization. It is assumed that the control input update signals are quantized before they are transmitted to the iterative learning controller. A logarithmic quantizer is used to decode the signal with a number of quantization levels. Then, a 2‐D Roesser model is established to describe the entire dynamics of the iterative learning control (ILC) system. By using the sector bound method, a sufficient asymptotic stability condition for such a 2‐D system is established and then the ILC design is given simultaneously. The result is also extended to more general cases where the system matrices contain uncertain parameters. The effectiveness of the proposed method is illustrated by a numerical example.     

数据丢失对迭代学习控制的影响分析

针对一类线性系统,分析数据丢失对迭代学习控制算法的影响.首先基于lifting方法给出跟踪误差渐近收敛和单调收敛的条件,并分析收敛速度与数据丢失率的关系,结果表明收敛速度随着数据丢失程度的增加而变慢.其次,为抑制迭代变化扰动的影响,给出一种存在数据丢失时的鲁棒迭代学习控制器设计方法,并将控制器设计问题转化为求取线性矩阵不等式的可行解.仿真示例验证了理论分析的结果以及鲁棒迭代学习控制算法的有效性.

     

Pareto iterative learning control: Optimized control for multiple performance objectives

Iterative learning control (ILC) is a 2-degree-of-freedom technique that seeks to improve system performance along the time and iteration domains. Traditionally, ILC has been implemented to minimize trajectory-tracking errors across an entire cycle period. However, there are applications in which the necessity for improved tracking performance can be limited to a few specific locations. For such systems, a modified learning controller focused on improved tracking at the selected points can be leveraged to address multiple performance metrics, resulting in systems that exhibit significantly improved behaviors across a wide variety of performance metrics. This paper presents a pareto learning control framework that incorporates multiple objectives into a single design architecture.     

测量数据丢失的一类非线性系统迭代学习控制

迭代学习控制方法应用于网络控制系统时,由于通信网络的约束导致数据包丢失现象经常发生.针对存在输出测量数据丢失的一类非线性系统,研究P型迭代学习控制算法的收敛性问题.将数据丢失描述为一个概率已知的随机伯努利过程,在此基础上给出P型迭代学习控制算法的收敛条件,理论上证明了算法的收敛性,并通过仿真验证理论结果.研究表明,当非线性系统存在输出测量数据丢失时,迭代学习控制算法仍然可以保证跟踪误差的收敛性.     

局部对称积分型迭代学习控制

提出了一个新的迭代学习控制（ＩＬＣ）更新律用于连续线性系统的有限时间区间跟踪控制,迭代学习控制作为一个前馈控制,迭代学习控制作为一个前馈控制器加在已有的反馈控制器之上,对于上倥 的反馈控制信号作局部对称积分,所提出的迭代学习控制更新律具备较简单的形式且仅含有两个设计参数,即：学习增益和局部积分的区间长度,给出了收敛性分析以及设计步骤。     

基于互补滑模控制和迭代学习控制的永磁直线同步电动机速度控制

为满足永磁直线同步电动机(PMLSM)伺服系统高速度高精度的要求,抑制不确定性对系统性能的影响,提出一种互补滑模控制(CSMC)和迭代学习控制(ILC)相结合的控制方法.该方法结合了CSMC强鲁棒性的优点和ILC跟踪精度高的特点,以CSMC中积分滑模面为基础设计新型迭代学习律,既可利用ILC对系统未建模动态进行估计,抑制端部效应、齿槽效应和摩擦力等周期不确定性的影响,又可利用CSMC减小参数变化和外部扰动等非周期不确定性对系统的影响,从而提高控制器的收敛速度和收敛精度,保证系统具有较强的速度跟踪性能.实验结果表明,该方法有效地提高了系统的动态响应能力,改善了速度跟踪精度.     

Iterative learning control for position tracking of a pneumatic actuated X–Y table

The iterative learning control (ILC) obtains the unknown information from repeated control operations. Meanwhile, the tracking error from previous stages is used as the correction factor for the next control action. Therefore, the ILC controller can make the system tracking error converge to a small region within a limited number of iterations. This study builds a proportional-valve-controlled pneumatic X–Y table system for performing position tracking control experiments. The experiments involve implementing the ILC controllers and comparing the results. The P-type updating law with delay parameters is used for both the x- and y-axes in the repetitive trajectory tracking control. Experimental results demonstrate that the ILC controller can effectively control the system and track the desired circular trajectory at different speeds. The control parameters are varied to investigate their effects on the ILC convergence.     

A Practical Iterative Learning Path‐Following Control Of An Omni‐Directional Vehicle

A new practical iterative learning control (ILC) updating law is proposed to improve the path following accuracy for an omni‐directional autonomous mobile robot. The ILC scheme is applied as a feedforward controller to the existing feedback controller. By using the local symmetrical double‐integral of the feedback control signal of the previous iteration, the ILC updating law takes a simple form with only two design parameters: the learning gain and the range of local integration. Convergence analysis is presented together with a design procedure. Simulation results on a difficult maneuver are presented to illustrate the effectiveness of the proposed simple and yet practical scheme. The simulation is based on the model of a novel robotic platform, the Utah State University (USU) Omni‐Directional Vehicle (ODV), which uses multiple “smart wheels,” whose speed and direction can be independently controlled through dedicated processors for each wheel.     

Global mean‐square exponential stabilization of stochastic system with time delay via impulsive control

This paper discusses the global mean‐square exponential stabilization problem for a class of nonlinear non‐autonomous stochastic systems with time delay via impulsive controller. By employing the D‐measure of the matrix and establishing a formula for the variation of parameters, some sufficient conditions are proposed for the design of an impulsive controller such that the stochastic impulsive control system with time varying system matrix and time delay is globally mean‐square exponentially stable. Some numerical examples are presented to illustrate the effectiveness of the proposed results. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

ILC strategy for progress improvement of economic performance in industrial model predictive control systems

A novel approach to progress improvement of the economic performance in model predictive control (MPC) systems is developed. The conventional LQG based economic performance design provides an estimation which cannot be done by the controller while the proposed approach can develop the design performance achievable by the controller. Its optimal performance is achieved by solving economic performance design (EPD) problem and optimizing the MPC performance iteratively in contrast to the original EPD which has nonlinear LQG curve relationship. Based on the current operating data from MPC, EPD is transformed into a linear programming problem. With the iterative learning control (ILC) strategy, EPD is solved at each trial to update the tuning parameter and the designed condition; then MPC is conducted in the condition guided by EPD. The ILC strategy is proposed to adjust the tuning parameter based on the sensitivity analysis. The convergence of EPD by the proposed ILC has also been proved. The strategy can be applied to industry processes to keep enhancing the performance and to obtain the achievable optimal EPD. The performance of the proposed method is illustrated via an SISO numerical system as well as an MIMO industry process.     

Repetitive process based design and experimental verification of a dynamic iterative learning control law

This paper gives new results on iterative learning control (ILC) design and experimental verification using the stability theory of linear repetitive processes. Using this theory a control law can be designed in one step to force error convergence and produce acceptable transient dynamics. Previous research developed algorithms for the design of a static control law with supporting experimental verification. Should a static law not give the required levels of performance one option is to allow the control law to have internal dynamics. This paper develops a procedure for the design of such a control law with supporting experimental verification on a gantry robot, including a comparative performance against a static law applied to the same robot. The resulting ILC design is an efficient combination of linear matrix inequalities and optimization algorithms.     

An integrated robust iterative learning control strategy for batch processes based on 2D system

This paper studies the problem of integrated control in the 2-dimensional (2D) system with parameter uncertainties for batch processes. An integrated iterative learning control (ILC) strategy based on quadratic performance for batch processes is proposed. It realizes comprehensive control by combining robust ILC in batch-axis with model predictive control (MPC) in time-axis. The design of quadratic-criterion-based ILC for the system can be converted into a min-max problem. Then a model predictive controller with time-varying prediction horizon is designed based on a quadratic cost function. For an uncertain model, a novel integrated robust ILC scheme based on a nominal model is further proposed. As a result, the control law of the 2D system can be regulated during one batch, which leads to good tracking performance and strong robustness against the disturbance and the uncertainties. Moreover, the analyses of the convergence and tracking performance are given. The proposed methods are applied to batch reactor, and results demonstrate that the system has good robustness and convergence. This paper provides a new way for batch processes control.