A cryogen‐based peak‐shaving technology: systematic approach and techno‐economic analysis

A peak‐shaving technology is recently proposed, which integrates peak‐electricity generation, cryogenic energy storage and CO₂ capture. In such a technology, off‐peak electricity is used to produce liquid nitrogen and oxygen in an air separation and liquefaction unit. At peak hours, natural gas (or alternative gases, e.g. from gasification of coal) is burned by oxygen from the air separation unit (oxy‐fuel combustion) to generate electricity. CO₂ produced is captured in the form of dry ice. Liquid nitrogen produced in the air separation plant not only serves as an energy storage medium but also supplies the low‐grade cold energy for CO₂ separation. In addition, waste heat from the tail gas can be used to superheat nitrogen in the expansion process to further increase the system efficiency. This article reports a systematic approach, with an aim to provide technical information for the system design. Three potential blending gases (helium, oxygen and CO₂) are considered not only for assessing thermodynamic performance but also for techno‐economic analysis. The peak‐shaving systems are also compared with natural gas combined cycle and an oxy–natural gas combined cycle in terms of capital cost and peak electricity production cost. Copyright © 2011 John Wiley & Sons, Ltd.     

Using next generation nuclear power reactors for development of a techno‐economic model for hydrogen production

Nuclear and hydrogen are considered to be the most promising alternatives energy sources in terms of meeting future demand and providing a CO?‐free environment, and interest in the development of more cost‐effective hydrogen production plants is increasing—and nuclear‐powered hydrogen generation plants may be a viable alternative. This paper is a report on investigating the application of new generation nuclear power plants to hydrogen production and development of an associated techno‐economic model. In this paper, theoretical and computational assessments of generations II, III+, and IV nuclear power plants for hydrogen generation scenarios have been reported. Technical analyses were conducted on each reactor type—in terms of the design standard, fuel specification, overnight capital cost, and hydrogen generation. In addition, a theoretical model was developed for calculating various hydrogen generation parameters, and it was then extended to include an economic assessment of nuclear power plant‐based hydrogen generation. The Hydrogen Economic Evaluation Program originally developed by the International Atomic Energy Agency was used for calculating various parameters, including hydrogen production and storage costs, as well as equity, operation and maintenance (O&M), and capital costs. The results from each nuclear reactor type were compared against reactor parameters, and the ideal candidate reactor was identified. The simulation results also verified theoretically proven results. The main objective of the research was to conduct a prequalification assessment for a cogeneration plant, by developing a model that could be used for technical and economic analysis of nuclear hydrogen plant options. It was assessed that high‐temperature gas‐cooled reactors (HTGR‐PM and PBR200) represented the most economical and viable plant options for hydrogen production. This research has helped identify the way forward for the development of a commercially viable, nuclear power‐driven, hydrogen generation plant.     

Parametric techno‐economic studies of coal/biomass co‐gasification for IGCC plants with carbon capture using various coal ranks,fuel‐feeding schemes,and syngas cooling methods

Because of biomass's limited supply (as well as other issues involving its feeding and transportation), pure biomass plants tend to be small, which results in high production and capital costs (per unit power output) compared with much larger coal plants. Thus, it is more economically attractive to co‐gasify biomass with coal. Biomass can also make an existing plant carbon‐neutral or even carbon‐negative if enough carbon dioxide is captured and sequestered (CCS). As a part of a series of studies examining the thermal and economic impact of different design implementations for an integrated gasification combined cycle (IGCC) plant fed with blended coal and biomass, this paper focuses on investigating various parameters, including radiant cooling versus syngas quenching, dry‐fed versus slurry‐fed gasification (particularly in relation to sour‐shift and sweet‐shift carbon capture systems), oxygen‐blown versus air‐blown gasifiers, low‐rank coals versus high‐rank coals, and options for using syngas or alternative fuels in the duct burner for the heat recovery steam generator (HRSG) to achieve the desired steam turbine inlet temperature. Using the commercial software, Thermoflow^®, the case studies were performed on a simulated 250‐MW coal IGCC plant located near New Orleans, Louisiana, and the coal was co‐fed with biomass using ratios ranging from 10% to 30% by weight. Using 2011 dollars as a basis for economic analysis, the results show that syngas coolers are more efficient than quench systems (by 5.5 percentage points), but are also more expensive (by $500/kW and 0.6 cents/kW h). For the feeding system, dry‐fed is more efficient than slurry‐fed (by 2.2–2.5 points) and less expensive (by $200/kW and 0.5 cents/kW h). Sour‐shift CCS is both more efficient (by 3 percentage points) and cheaper (by $600/kW or 1.5 cents/kW h) than sweet‐shift CCS. Higher‐ranked coals are more efficient than lower‐ranked coals (2.8 points without biomass, or 1.5 points with biomass) and have lower capital cost (by $600/kW without using biomass, or $400/kW with biomass). Finally, plants with biomass and low‐rank coal feedstock are both more efficient and have lower costs than those with pure coal: just 10% biomass seems to increase the efficiency by 0.7 points and reduce costs by $400/kW and 0.3 cents/kW h. However, for high‐rank coals, this trend is different: the efficiency decreases by 0.7 points, and the cost of electricity increases by 0.1 cents/kW h, but capital costs still decrease by about $160/kW. Copyright © 2016 John Wiley & Sons, Ltd.     

Parametric study of chemical looping combustion for tri‐generation of hydrogen,heat, and electrical power with CO2 capture

In this article, a novel cycle configuration has been studied, termed the extended chemical looping combustion integrated in a steam‐injected gas turbine cycle. The products of this system are hydrogen, heat, and electrical power. Furthermore, the system inherently separates the CO₂ and hydrogen that is produced during the combustion. The core process is an extended chemical looping combustion (exCLC) process which is based on classical chemical looping combustion (CLC). In classical CLC, a solid oxygen carrier circulates between two fluidized bed reactors and transports oxygen from the combustion air to the fuel; thus, the fuel is not mixed with air and an inherent CO₂ separation occurs. In exCLC the oxygen carrier circulates along with a carbon carrier between three fluidized bed reactors, one to oxidize the oxygen carrier, one to produces and separate the hydrogen, and one to regenerate the carbon carrier. The impacts of process parameters, such as flowrates and temperatures have been studied on the efficiencies of producing electrical power, hydrogen, and district heating and on the degree of capturing CO₂. The result shows that this process has the potential to achieve a thermal efficiency of 54% while 96% of the CO₂ is captured and compressed to 110 bar. Copyright © 2005 John Wiley & Sons, Ltd.     

Process design and techno‐economic analysis of ethyl levulinate production from carbon dioxide and 1,4‐butanediol as an alternative biofuel and fuel additive

Carbon dioxide capture, utilization, and storage (CCUS) is one of the promising negative emission technologies (NET). Within various CCUS routes available, CO₂ conversion into fuels is one of the attractive options. Currently, most of CO₂ conversion into fuels requires hydrogen, which is expensive and consume large energy to produce. Hence, a different route of producing fuel from CO₂ by utilizing 1,4‐butanediol as the raw material is proposed and evaluated in this study. This alternative route comprises production of levulinic acid from the reaction between CO₂ and 1,4‐butanediol and production of ethyl levulinate, an alternative biofuel and biofuel additive, via an esterification reaction of levulinic acid with ethanol. The process is designed and simulated according to the available data and evaluated in terms of its technical features. Because of the unavailability of reaction data for synthesis of levulinic acid from 1,4‐butanediol and CO₂, several assumptions were taken, which may implicate the accuracy of the studied design. This technical evaluation is followed by cost estimations and sensitivity analysis. Because of the free CO₂, the profitability of the plant depends strongly on the prices of the other chemicals and the price difference between 1,4‐butanediol (raw material) and ethyl levulinate (product). Monte Carlo simulation indicates that the proposed plant will always be profitable if the ethyl levulinate is slightly more expensive than the 1,4‐butanediol, highlighting that the process of producing ethyl levulinate from CO₂ is economically profitable. Future research should be directed towards a catalytic system that can effectively convert CO₂ into levulinic acid, by‐products produced from the two reaction steps, and reduce the excess ethanol used in the second reaction.     

Study on different zero CO2 emission IGCC systems with CO2 capture by integrating OTM

In this paper, different zero CO₂ emission integrated gasification combined cycle (IGCC) systems based on the oxy‐fuel combustion method by integrating with oxygen ion transfer membrane (OTM) with and without sweep gas are proposed in order to reduce the energy consumption of CO₂ capture. By utilizing the Aspen Plus software, the overall system models are established. The performances of the proposed systems are compared with the traditional IGCC system without CO₂ capture and the zero CO₂ emission IGCC system based on the oxy‐fuel combustion method using the cryogenic air separation unit. In addition, the effects of OTM key parameters on the proposed system performance, such as the feed side pressure, permeate side pressure, and operating temperature, are investigated and analyzed. The results show that the efficiency of the zero CO₂ emission IGCC system based on the oxy‐fuel combustion method integrated with OTM without sweep gas is 6.67% lower than that of the traditional IGCC system without CO₂ capture, but 1.88% higher than that of the zero CO₂ emission IGCC system using the cryogenic air separation unit, and 0.64% lower than that of the proposed system with sweep gas. The research achievements will provide valuable references for further study on CO₂ capture based on IGCC with lower energy penalty. Copyright © 2016 John Wiley & Sons, Ltd.     

An integrated system for thermal power generation,electrical energy storage and CO2 capture

This work reports a newly proposed system for electrical energy storage. The new system combines a direct open nitrogen (cryogen) expansion cycle with a natural gas‐fuelled closed Brayton cycle and the CO₂ produced in the system is captured in the form of dry ice. Thermodynamic analyses are carried out on the system under the baseline conditions of 1 kg s^?1 natural gas, a combustor operating pressure of 8 bars and a cryogen topping pressure of 100 bars. The results show that the exergy efficiency of the proposed system is as high as 64% under the baseline conditions, whereas the corresponding electricity storage efficiency is about 54%. A sensitivity analysis has also been carried out on the main operating conditions. The results indicate that the baseline performance can be enhanced by increasing the gas turbine (GT) inlet temperature, decreasing the approach temperature of the heat exchange processes, operating the combustor at an optimal pressure of ～7 bars and operating the cryogen topping pressure at ～90 bars. Further enhancement can be achieved by increasing the isentropic efficiency of the GT and the liquefaction process. The results of this work also suggest that the power capacity installation of peak‐load units and fuel consumption could be reduced by as much as 50% by using the newly proposed system. Further work is suggested for an economic analysis of the system. Copyright © 2010 John Wiley & Sons, Ltd.     

A comparative techno‐economic assessment of three bio‐oil upgrading routes for aviation biofuel production

The aviation industry continues to grow, and consequently, more fuel is needed. With the intention of decarbonising the aviation sector, sustainable routes that have the potential to mitigate emissions, such as biomass fast pyrolysis, can positively contribute to this direction. Within this context, the present study performs a comparative techno‐economic evaluation of aviation biofuel manufacture via the main bio‐oil upgrading pathways, namely, hydroprocessing (HP), gasification followed by Fischer‐Tropsch synthesis (G+FT), and zeolite cracking (ZC). The research constitutes the first endeavour to investigate and compare the feasibility of producing biojet fuel via pyrolysis‐based routes. The presented work provides an inclusive evaluation that comprises process modelling and financial assessment. Based on the simulations, overall energy efficiencies of 48.8%, 45.73%, and 45.38% and jet fuel energy efficiencies of 23.70%, 21.45%, and 20.53% were calculated, while the implementation of a discounted cash flow analysis estimated minimum jet fuel selling prices (MJSPs) of 1.98, 2.32, and 2.21 $/L for the HP, the G+FT, and the ZC, respectively. Sensitivity analysis revealed that the processes are capital and feedstock intensive while an increase to the bio‐oil yield will favour the economic performance of the examined biorefineries. An increase of the plant size from 100 (base case) to 150 dry tonnes per hour of feedstock will decrease the selling prices by approximately 25% for all cases. Monte Carlo simulations exhibited that without establishing and/or maintaining appropriate policy schemes, there is no pragmatic prospect for the examined biorefineries to beat the competition against the prevailing oil infrastructures.     

Thermodynamic analysis of high‐ash coal‐fired power plant with carbon dioxide capture

A thermodynamic analysis of a 500‐MWe subcritical power plant using high‐ash Indian coal (base plant) is carried out to determine the effects of carbon dioxide (CO₂) capture on plant energy and exergy efficiencies. An imported (South African) low‐ash coal is also considered to compare the performance of the integrated plant (base plant with CO₂ capture plant). Chemical absorption technique using monoethanolamine as an absorbent is adopted in the CO₂ capture plant. The flow sheet computer program “Aspen Plus” is used for the parametric study of the CO₂ capture plant to determine the minimum energy requirement for absorbent regeneration at optimum absorber–stripper configuration. Energy and exergy analysis for the integrated plant is carried out using the power plant simulation software “Cycle‐Tempo”. The study also involves determining the effects of various steam extraction techniques from the turbine cycle (intermediate‐pressure–low‐pressure crossover pipe) for monoethanolamine regeneration. It is found that the minimum reboiler heat duty is 373 MW_th (equivalent to 3.77 MJ of heat energy per kg of CO₂ captured), resulting in a drop of plant energy efficiency by approximately 8.3% to 11.2% points. The study reveals that the maximum energy and exergy losses occur in the reboiler and the combustor, respectively, accounting for 29% and 33% of the fuel energy and exergy. Among the various options for preprocessing steam that is extracted from turbine cycle for reboiler use, “addition of new auxiliary turbine” is found to be the best option. Copyright © 2011 John Wiley & Sons, Ltd.     

Techno‐economic analysis of biomass/coal Co‐gasification IGCC systems with supercritical steam bottom cycle and carbon capture

In recent years, integrated gasification combined cycle technology has been gaining steady popularity for use in clean coal power operations with carbon capture and sequestration (CCS). This study focuses on investigating two approaches to improve efficiency and further reduce the greenhouse gas (GHG) emissions. First, replace the traditional subcritical Rankine steam cycle portion of the overall plant with a supercritical steam cycle. Second, add different amounts of biomass as feedstock to reduce emissions. Employing biomass as a feedstock has the advantage of being carbon neutral or even carbon negative if CCS is implemented. However, due to limited feedstock supply, such plants are usually small (2–50 MW), which results in lower efficiency and higher capital and production costs. Considering these challenges, it is more economically attractive and less technically challenging to co‐combust or co‐gasify biomass wastes with low‐rank coals. Using the commercial software, Thermoflow®, this study analyzes the baseline plants around 235 MW and 267 MW for the subcritical and supercritical designs, respectively. Both post‐combustion and pre‐combustion CCS conditions are considered. The results clearly show that utilizing a certain type of biomass with low‐rank coals up to 50% (wt.) can, in most cases, not only improve the efficiency and reduce overall emissions but may be economically advantageous, as well. Beyond a 10% Biomass Ratio, however, the efficiency begins to drop due to the rising pretreatment costs, but the system itself still remains more efficient than from using coal alone (between 0.2 and 0.3 points on average). The CO₂ emissions decrease by about 7000 tons/MW‐year compared to the baseline (no biomass), making the plant carbon negative with only 10% biomass in the feedstock. In addition, implementing a supercritical steam cycle raises the efficiency (1.6 percentage points) and lowers the capital costs ($300/kW), regardless of plant layout. Implementing post‐combustion CCS consistently causes a drop in efficiency (at least 7–8 points) from the baseline and increases the costs by $3000–$4000/kW and In recent years, integrated gasification combined cycle technology has been gaining steady popularity for use in clean coal power operations with carbon capture and sequestration (CCS). This study focuses on investigating two approaches to improve efficiency and further reduce the greenhouse gas (GHG) emissions. First, replace the traditional subcritical Rankine steam cycle portion of the overall plant with a supercritical steam cycle. Second, add different amounts of biomass as feedstock to reduce emissions. Employing biomass as a feedstock has the advantage of being carbon neutral or even carbon negative if CCS is implemented. However, due to limited feedstock supply, such plants are usually small (2–50 MW), which results in lower efficiency and higher capital and production costs. Considering these challenges, it is more economically attractive and less technically challenging to co‐combust or co‐gasify biomass wastes with low‐rank coals. Using the commercial software, Thermoflow®, this study analyzes the baseline plants around 235 MW and 267 MW for the subcritical and supercritical designs, respectively. Both post‐combustion and pre‐combustion CCS conditions are considered. The results clearly show that utilizing a certain type of biomass with low‐rank coals up to 50% (wt.) can, in most cases, not only improve the efficiency and reduce overall emissions but may be economically advantageous, as well. Beyond a 10% Biomass Ratio, however, the efficiency begins to drop due to the rising pretreatment costs, but the system itself still remains more efficient than from using coal alone (between 0.2 and 0.3 points on average). The CO₂ emissions decrease by about 7000 tons/MW‐year compared to the baseline (no biomass), making the plant carbon negative with only 10% biomass in the feedstock. In addition, implementing a supercritical steam cycle raises the efficiency (1.6 percentage points) and lowers the capital costs ($300/kW), regardless of plant layout. Implementing post‐combustion CCS consistently causes a drop in efficiency (at least 7–8 points) from the baseline and increases the costs by $3000–$4000/kW and $0.06–$0.07/kW‐h. The SO_x emissions also decrease by about 190 tons/year (7.6 × 10^?6 tons/MW‐year). Finally, the CCS cost is around $65–$72 per ton of CO₂. For pre‐combustion CCS, sour shift appears to be superior both economically and thermally to sweet shift in the current study. Sour shift is always cheaper, (by a difference of about $600/kW and $0.02‐$0.03/kW‐h), easier to implement, and also 2–3 percentage points more efficient. The economic difference is fairly marginal, but the trend is inversely proportional to the efficiency, with cost of electricity decreasing by 0.5 cents/kW‐h from 0% to 10% biomass ratio (BMR) and rising 2.5 cents/kW‐h from 10% to 50% BMR. Pre‐combustion CCS plants are smaller than post‐combustion ones and usually require 25% less energy for CCS due to their compact size for processing fuel flow only under higher pressure (450 psi), versus processing the combusted gases at near‐atmospheric pressure. Finally, the CO₂ removal cost for sour shift is around $20/ton, whereas sweet shift's cost is around $30/ton, which is much cheaper than that of post‐combustion CCS: about $60–$70/ton. Copyright © 2014 John Wiley & Sons, Ltd.     

Techno‐economic study of compressed air energy storage systems for the grid integration of wind power

Integrating variable renewable energy from wind farms into power grids presents challenges for system operation, control, and stability due to the intermittent nature of wind power. One of the most promising solutions is the use of compressed air energy storage (CAES). The main purpose of this paper is to examine the technical and economic potential for use of CAES systems in the grid integration. To carry out this study, 2 CAES plant configurations: adiabatic CAES (A‐CAES) and diabatic CAES (D‐CAES) were modelled and simulated by using the process simulation software ECLIPSE. The nominal compression and power generation of both systems were given at 100 and 140 MWe, respectively. Technical results showed that the overall energy efficiency of the A‐CAES was 65.6%, considerably better than that of the D‐CAES at 54.2%. However, it could be seen in the economic analysis that the breakeven electricity selling price (BESP) of the A‐CAES system was much higher than that of the D‐CAES system at €144/MWh and €91/MWh, respectively. In order to compete with large‐scale fossil fuel power plants, we found that a CO₂ taxation scheme (with an assumed CO₂‐tax of €20/tonne) improved the economic performance of both CAES systems significantly. This advantage is maximised if the CAES systems use low carbon electricity during its compression cycle, either through access to special tariffs at times of low carbon intensity on the grid, or by direct coupling to a clean energy source, for example a 100‐MW class wind farm.     

Techno‐economic comparison of boiler cold‐end flue gas heat recovery processes for efficient hard‐coal‐fired power generation

An important method to increase the efficiency of thermal power plants is to recover the exhaust gas heat at the boiler cold‐end with the stepwise integration of a steam turbine heat regenerative system. To this end, there are currently three typical heat recovery processes, that is, a low‐temperature economizer (LTE), segmented air heating (SAH) and bypass flue (BPF). To provide useful guidance to thermal power plants for optimal and efficient processes, the thermal economy and techno‐economic performance of the three aforementioned processes were calculated and compared using an in‐service 600‐MW hard‐coal‐fired ultra‐supercritical power unit as a reference. The results demonstrate that with the use of the LTE, SAH and BPF, respectively, to recover the exhaust heat, reducing the exhaust temperature from 122 °C to 90 °C, the net standard coal consumption rate of the 600‐MW unit can be reduced by 1.51, 1.71 and 2.81 g/(kW h). The initial costs of the three heat recovery projects are 1.69, 2.91 and 2.53 million USD. If the 600‐MW unit runs 5500 h per year at the rated load, the three processes can increase the earnings of the unit by 0.49, 0.52 and 0.94 million USD from coal savings annually, meaning that their dynamic payback periods are 4.42, 8.66 and 3.29 years, respectively. The results indicate that for a hard‐coal‐fired power unit, the coal savings achieved by exhaust heat recovery are notable. Among the three processes, SAH shows the worst techno‐economic performance because it induces a significant increase in initial costs while obtaining a limited increase in thermal economy, while BPF exhibits the best techno‐economic performance owing to the significant increase in thermal economy. Copyright © 2016 John Wiley & Sons, Ltd.     

Energy minimization in monoethanolamine‐based CO2 capture using capacitive deionization

Post‐combustion CO₂ capture using monoethanolamine (MEA) is a mature technology; however, the high energy input requirements for solvent regeneration are still a challenge for MEA‐based CO₂ capture. In this paper, a novel approach is presented in which a conventional CO₂ absorption–desorption system is integrated with capacitive deionization (CDI) in such a way to minimize the heat duty requirement of the stripper. The CO₂‐rich solution drawn from the absorber column is first sent to CDI where ionic species are adsorbed at oppositely charged electrodes during the charging cycle, and an ion‐free solution is sent back to the absorber. The adsorbed ions released during the regeneration cycle are sent to the stripper column. The concentrated solution from the CDI process that was sent to the stripper required low heat duty to regenerate the solvent because of the high CO₂ loading of the solution. The feasibility of the suggested modelling technique is verified at various stripper inlet temperatures and lean CO₂ loadings. The results indicate that 10–45% of the total energy supplied to the stripper can be conserved at a lean CO₂ loading of 0.0000–0.0323 using the suggested process model. Moreover, the required size of the stripper column will be small due to the small volume of the concentrated ionic solutions from the CDI cell, eliminating the initial cost of the CO₂ capture system. Copyright © 2014 John Wiley & Sons, Ltd.     

Performance analysis of a double calcium looping‐integrated biomass‐fired power plant: Exploring a carbon reduction opportunity

Integrating biomass energy generation with carbon capture will result in “carbon neutral” to “carbon negative” technology. Countries like India and China possess significant reserves of limestone. Calcium looping (CaL) technology can prove to be a promising option for carbon capture in these countries. The present work aims at improving the performance of CaL‐integrated biomass‐fired power plant (BFPP) by exploring different looping configurations. In this study, (i) standalone BFPP, (ii) conventional CaL (single stage), and (iii) double CaL‐integrated BFPP have been systematically evaluated. A comparative performance evaluation of these three plants in terms of energy, exergy and ecological assessment, has been carried out. A detailed parametric study and unit‐wise exergy analysis of the best configuration among the three are presented to identify the scope for further improvement in efficiency and energy savings.     

A comparative analysis of energy and CO2 taxes on the primary energy mix for electricity generation

In many countries, economies are moving towards internalization of external costs of greenhouse‐gas (GHG) emissions. This can best be achieved by either imposing additional taxes or by using an emission‐permit‐trading scheme. The electricity sector is under scrutiny in the allocation of emission‐reduction objectives, not only because it is a large homogeneous target, but also because of the obvious emission‐reduction potential by decreasing power generation based on carbon‐intensive fuels. In this paper, we discuss the impact of a primary‐energy tax and a CO₂ tax on the dispatching strategy in power generation. In a case study for the Belgian power‐generating context, several tax levels are investigated and the impact on the optimal dispatch is simulated. The impact of the taxes on the power demand or on the investment strategies is not considered. As a conclusion, we find that a CO₂ tax is more effective than a primary‐energy tax. Both taxes accomplish an increased generation efficiency in the form of a promotion of combined‐cycle gas‐fired units over coal‐fired units. The CO₂ tax adds an incentive for fuel switching which can be achieved by altering the merit order of power plants or by switching to a fuel with a lower carbon content within a plant. For the CO₂ tax, 13 €/tonCO₂ is withheld as the optimal value which results in an emission reduction of 13% of the electricity‐related GHG emissions in the Belgian power context of 2000. A tax higher than 13 €/tonCO₂ does not contribute to the further reduction of GHGs. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of photovoltaic mini‐grid systems for remote locations: A techno‐economic approach

This paper presents a techno‐economic analysis of photovoltaic mini‐grid systems (PMs), using a group of remote houses in 3 locations in Nigeria, as case studies. It uses a worst‐case users' load demand approach for the design and analysis of the proposed energy system, according to international technical standards. It presents detailed capacity, yield and losses, battery state of charge (SoC), reliability, users' load demand increase (Ldi), and life cycle economic analyses by using the Hybrid Optimisation for Electric Renewables (HOMER) simulation tool. The effect of 25% Ldi is also considered in the paper. The study can be used to develop a practical energy model to address the poor energy situation in those locations when they are implemented. Results indicate that PMs of 68, 76, and 61 kW can meet the users' demand of ~63 500 kWh/year with an availability of 99.2% for the locations, respectively. By including a 30‐kVA diesel generator to the PMs' model, an availability of 100% was obtained, demonstrating that the issue of loss of energy supply for several days in the year due to users' Ldi and the cloudy days is being addressed. The results further show that although the hybrid energy systems have relatively higher initial capital, total life cycle and replacement costs, and the cost of energy, they achieve a higher reliability compared with the proposed PMs. The research can be useful for planning solar PV infrastructure for remote locations around the world.     

A comparison of electricity and hydrogen production systems with CO2 capture and storage—Part B: Chain analysis of promising CCS options

Promising electricity and hydrogen production chains with CO₂ capture, transport and storage (CCS) and energy carrier transmission, distribution and end-use are analysed to assess (avoided) CO₂ emissions, energy production costs and CO₂ mitigation costs. For electricity chains, the performance is dominated by the impact of CO₂ capture, increasing electricity production costs with 10–40% up to 4.5–6.5 €ct/kWh. CO₂ transport and storage in depleted gas fields or aquifers typically add another 0.1–1 €ct/kWh for transport distances between 0 and 200 km. The impact of CCS on hydrogen costs is small. Production and supply costs range from circa 8 €/GJ for the minimal infrastructure variant in which hydrogen is delivered to CHP units, up to 20 €/GJ for supply to households. Hydrogen costs for the transport sector are between 14 and 16 €/GJ for advanced large-scale coal gasification units and reformers, and over 20 €/GJ for decentralised membrane reformers. Although the CO₂ price required to induce CCS in hydrogen production is low in comparison to most electricity production options, electricity production with CCS generally deserves preference as CO₂ mitigation option. Replacing natural gas or gasoline for hydrogen produced with CCS results in mitigation costs over 100 €/t CO₂, whereas CO₂ in the power sector could be reduced for costs below 60 €/t CO₂ avoided.     

小规模分布式光伏发电系统用户侧经济性分析

从用户侧角度研究了小规模分布式光伏发电系统的经济性。以内部收益率、静态投资回收期及全寿命期净收益为指标,建立了分布式光伏发电系统的经济分析模型;以湖北省武汉市和宜昌市为代表,以典型配置的光伏发电系统为范例,验证了经济性分析模型的正确性。文章深入研究了发电上网率、系统可用率、政府补贴及单位造价等因素对分布式光伏系统经济性的影响,还研究了政府补贴与单位造价的耦合关系。     

The performance analysis and evaluation of C‐PV/T aided power generation system

In this paper, a novel solar aided power generation (SAPG) hybrid system based on the structural characteristics of coal‐fired power generation is established. In this system, the extraction steam of No.8 low pressure heater is replaced by the hot water coming from a concentration‐photovoltaic/thermal (C‐PV/T) module. The extraction steam returns into the steam turbine to do work, which increases the output power. And the electricity from the parallel C‐PV/T module goes directly into the power grid, which increases the generated power. The C‐PV/T module coupled with coal‐fired power generation improves the solar energy efficiency and provides hot water. As a case study, the economic calculation is performed with actual operation data extracted from a 600‐MW coal‐fired unit. The results show that the total efficiency increased by 1.3%, the coal fuel consumption is lowered by 11 g/kW·h, and the investment recovery period is approximately 7 years. This study offers a theoretical support to the engineering demonstration.     

200‐MW chemical looping combustion based thermal power plant for clean power generation

The present study demonstrates a possible configuration of a 200 MW chemical looping combustion (CLC) system with methane (CH₄) as fuel. Iron oxide‐based oxygen carriers were used because of its non‐toxic nature, low‐cost, and wide availability. We analyzed the effects of different variables on the design of the system. For the air reactor (oxidizer), bed mass is independent, and for the fuel reactor (reducer), it decreases with increase in the conversion difference between the air and fuel reactors. On the other hand, the pressure drop in the air reactor is unchanged, whereas for the fuel reactor, it decreases with the same increase of conversion difference between air and fuel reactors. Also, entrained solid mass flow rate from the air to fuel reactor shows a decreasing trend. Bed mass, bed height, pressure drop, and residence time of the bed materials decrease with increase in the conversion rates in the air and fuel reactors. Residence time of bed material in the air and fuel reactor reduces with increase in the temperature of the air reactor. Copyright © 2011 John Wiley & Sons, Ltd.