Investigation of maximum wind power extraction using adaptive virtual lookup‐table approach

With the advance of power electronic technology, direct‐driven permanent magnet synchronous generators (PMSG) have increasingly drawn interests to wind turbine manufacturers. Unlike a fixed‐speed wind turbine, the maximum power extraction of a PMSG wind turbine is affected by (1) electrical characteristics of the generator, (2) aerodynamic characteristics of the turbine blades, and (3) maximum power extraction strategies. In an environment integrating all the three characteristics, it is found in this paper that the existing commercial lookup‐table maximum power extraction mechanism suitable to a DFIG wind turbine is not suitable to a PMSG wind turbine. Through the integrative study of all the three characteristics, this paper proposes a novel PMSG maximum power extraction design. The special features of the proposed strategy include (i) an adaptive virtual lookup‐table approach for PMSG maximum power extraction and (ii) an implementation of the peak power‐tracking scheme based on a novel direct‐current vector control configuration. The proposed maximum power extraction mechanism with a nested speed‐ and current‐loop control structure is built by using MatLab SimPowerSystems. Simulation studies demonstrate that the proposed PMSG peak power‐tracking strategy has superior performance in various aspects under both stable and gust wind conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

小型风力发电机组优化控制策略与实验研究

提出一种小型风力发电机组功率的优化控制策略.根据选定的300 W/24 V永磁发电机,使用Wilson叶片设计计算模型,应用MATLAB语言设计了300 W风机叶片;并针对现有风机控制系统中将控制器的设计与叶片、电机的匹配特性彼此孤立、分离的现象,设计出与风力发电机的电机、叶片相互匹配的控制器.在风洞试验中测试了样机在8、10 、12 、15 m/s等风速一定条件下,功率随系统电压的变化规律,当降低系统电压时,风机输出功率会一直下降,在此过程中并没有出现功率增加的现象,也就充分证明了工作在峰前区域的风力发电机,当风速大于额定风速时,控制系统可以通过减小接入系统的负载电阻值来控制其功率.这对研究小型风力发电系统的可控性、可靠性和耐久性有一定的指导意义和实用价值.     

双馈风力发电系统的最大风能控制策略

在分析变速恒频风力发电系统最大风能捕获策略的基础上,提出了一种通过直接控制双馈发电机转子电流就可实现系统低于额定风速下的最大风能捕获又可使得电机铜耗最小化运行的控制策略.首先,在考虑风力机特性和双馈发电机基本电磁关系的基础上,分别推导了双馈发电机定子铜耗最小化运行和最大风能捕获的数学模型.其次,根据双馈发电机最优转子电流的数学模型,建立了双馈风力发电机系统最大风能捕获的控制策略.最后,利用Matlab/Simulink对不同风速下双馈发电机系统的运行性能进行了分析和比较,结果验证了该控制策略的正确性和可行性.     

A robust power control strategy to enhance LVRT capability of grid‐connected DFIG‐based wind energy systems

This paper presents a new robust and effective control strategy to mitigate symmetrical voltage dips in a grid‐connected doubly fed induction generator (DFIG) wind energy conversion system without any additional hardware in the system. The aim is to control the power transmitted to the grid so as to keep the electrical and mechanical quantities above their threshold protection values during a voltage dip transient. To achieve this, the references of the powers are readjusted to adapt the wind energy conversion system to the fault conditions. Robust control strategies, combining the merits of sliding mode theory and fuzzy logic, are then proposed in this paper. These controllers are derived from the dynamic model of the DFIG considering the variations in the stator flux generated by the voltage drop. This approach is found to yield better performance than other control design methods which assume the flux in the stator to remain constant in amplitude. This control scheme is compliant with the fault‐ride‐through grid codes which require the wind turbine generator to remain connected during voltage dips. A series of simulation scenarios are carried out on a 3‐MW wind turbine system to demonstrate the effectiveness of the proposed control schemes under voltage dips and parameter uncertainty conditions.     

Performance of PI controller for control of active and reactive power in DFIG operating in a grid-connected variable speed wind energy conversion system

Due to several factors, wind energy becomes an essential type of electricity generation. The share of this type of energy in the network is becoming increasingly important. The objective of this work is to present the modeling and control strategy of a grid connected wind power generation scheme using a doubly fed induction generator (DFIG) driven by the rotor. This paper is to present the complete modeling and simulation of a wind turbine driven DFIG in the second mode of operating (the wind turbine pitch control is deactivated). It will introduce the vector control, which makes it possible to control independently the active and reactive power exchanged between the stator of the generator and the grid, based on vector control concept (with stator flux or voltage orientation) with classical PI controllers. Various simulation tests are conducted to observe the system behavior and evaluate the performance of the control for some optimization criteria (energy efficiency and the robustness of the control). It is also interesting to play on the quality of electric power by controlling the reactive power exchanged with the grid, which will facilitate making a local correction of power factor.     

An input‐output linearization–based control strategy for wind energy conversion system to enhance stability

This paper proposes a novel control strategy for doubly fed induction generator (DFIG)‐based wind energy conversion system to investigate the potential of enhancing the stability of wind energy transmission system, a synchronous generator weakly integrated to a power system with a DFIG‐based wind farm. The proposed approach uses state feedback to exactly linearize the nonlinear wind energy transmission system from control actions (active power and reactive power control order of DFIG) to selected outputs (power angle and voltage behind transient resistance of synchronous generator) at first. Then, on account of the linearized subsystem, the stability enhancement controller is designed based on linear quadratic regulator algorithm to contribute adequate damping characteristics to oscillations of the synchronous generator system under various operation points. The proposed control strategy successfully deals with the nonlinear behaviors exist from the inputs to outputs and improve the robustness with respect to the variation of system operation points. Furthermore, not only the rotor angle stability but also the voltage stability is enhanced by using the proposed control strategy. The simulation results carried on the studied system verify the effectiveness of the proposed control strategy of wind energy conversion system for system stability enhancement and the robustness against various system operation points.     

Power system frequency response from fixed speed and doubly fed induction generator‐based wind turbines

Throughout Europe there is an increasing trend of connecting high penetrations of wind turbines to the transmission networks. This has resulted in transmission system operators revising their grid code documents for the connection of large wind farms. These specifications require large MW capacity wind farms to have the ability to assist in some of the power system control services currently carried out by conventional synchronous generation. These services include voltage and frequency control. It is now recognized that much of this new wind generation plant will use either fixed speed induction generator (FSIG)‐ or doubly fed induction generator (DFIG)‐based wind turbines. The addition of a control loop to synthesize inertia in the DFIG wind turbine using the power electronic control system has been described. The possibility of deloading wind turbines for frequency response using blade pitch angle control is discussed. A pitch control scheme to provide frequency response from FSIG and DFIG wind turbines is also described. A case study of an FSIG wind turbine with frequency response capabilities is investigated. Copyright © 2004 John Wiley & Sons, Ltd.     

Co‐ordinated voltage control of DFIG wind turbines in uninterrupted operation during grid faults

Emphasis in this article is on the design of a co‐ordinated voltage control strategy for doubly fed induction generator (DFIG) wind turbines that enhances their capability to provide grid support during grid faults. In contrast to its very good performance in normal operation, the DFIG wind turbine concept is quite sensitive to grid faults and requires special power converter protection. The fault ride‐through and grid support capabilities of the DFIG address therefore primarily the design of DFIG wind turbine control with special focus on power converter protection and voltage control issues. A voltage control strategy is designed and implemented in this article, based on the idea that both converters of the DFIG (i.e. rotor‐side converter and grid‐side converter) participate in the grid voltage control in a co‐ordinated manner. By default the grid voltage is controlled by the rotor‐side converter as long as it is not blocked by the protection system, otherwise the grid‐side converter takes over the voltage control. Moreover, the article presents a DFIG wind farm model equipped with a grid fault protection system and the described co‐ordinated voltage control. The whole DFIG wind farm model is implemented in the power system simulation toolbox PowerFactory DIgSILENT. The DFIG wind farm ride‐through capability and contribution to voltage control in the power system are assessed and discussed by means of simulations with the use of a transmission power system generic model developed and delivered by the Danish Transmission System Operator Energinet.dk. The simulation results show how a DFIG wind farm equipped with voltage control can help a nearby active stall wind farm to ride through a grid fault, without implementation of any additional ride‐through control strategy in the active stall wind farm. Copyright © 2006 John Wiley &Sons, Ltd.     

风力机特性的直流电动机模拟及其变速恒频风力发电研究中的应用

为了能在不具备风场环境的实验室条件下对双馈异步发电机的交流励磁发电技术进行实验研究,该文提出了采用直流电动机模拟风力机工作特性的实现方案。该方法基于风力机和直流电动机在功率(转矩)特性上的相似性,采用转矩控制方案实现了风力机特性的直流电动机模拟,进而构建了整个变速恒频DFIG风力发电装置的实验系统。首次在实验室环境下实现了最大风能动态追踪、P、Q解耦控制的实验研究,验证了直流电动机模拟风力机特性的可实现性和变速恒频DFIG风力发电系统最大风能追踪控制策略的正确性。     

Comparison of simulators for variable‐speed wind turbine transient analysis

This paper presents a comparison of three variable‐speed wind turbine simulators used for a 2 MW wind turbine short‐term transient behaviour study during a symmetrical network disturbance. The simulator with doubly fed induction generator (DFIG) analytical model, the simulator with a finite element method (FEM) DFIG model and the wind turbine simulator with an analytical model of DFIG are compared. The comparison of the simulation results shows the influence of the different modelling approaches on the short‐term transient simulation accuracy. Copyright © 2005 John Wiley & Sons, Ltd.     

Dynamic contribution of variable-speed wind energy conversion system in system frequency regulation

Frequency regulation in a generation mix having large wind power penetration is a critical issue, as wind units isolate from the grid during disturbances with advanced power electronics controllers and reduce equivalent system inertia. Thus, it is important that wind turbines also contribute to system frequency control. This paper examines the dynamic contribution of doubly fed induction generator (DFIG)-based wind turbine in system frequency regulation. The modified inertial support scheme is proposed which helps the DFIG to provide the short term transient active power support to the grid during transients and arrests the fall in frequency. The frequency deviation is considered by the controller to provide the inertial control. An additional reference power output is used which helps the DFIG to release kinetic energy stored in rotating masses of the turbine. The optimal speed control parameters have been used for the DFIG to increases its participation in frequency control. The simulations carried out in a two-area interconnected power system demonstrate the contribution of the DFIG in load frequency control.     

Modelling analysis of transient stability simulation with high penetration of grid‐connected wind farms of DFIG type

This paper shows a model of a doubly fed induction generator (DFIG) including a simplified model of a wind turbine for the purpose of transient stability analysis of large‐scale power systems with great wind farms penetration. The wind turbine model and the DFIG model are systematically deducted in this paper. Specially, the improved model of rotor‐side converter and the simplified grid‐side converter model are considered in our work. The corresponding machine–network interface solution based on the synchronously rotating common x‐y reference frame is elaborately issued in this paper. Furthermore, a method is proposed to calculate the DFIG initial conditions as well. A simplified model of the turbine is used excluding among other components the pitch control. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparison of the response of doubly fed and fixed-speed induction generator wind turbines to changes in network frequency

Synchronous and fixed-speed induction generators release the kinetic energy of their rotating mass when the power system frequency is reduced. In the case of doubly fed induction generator (DFIG)-based wind turbines, their control system operates to apply a restraining torque to the rotor according to a predetermined curve with respect to the rotor speed. This control system is not based on the power system frequency and there is negligible contribution to the inertia of the power system. A DFIG control system was modified to introduce inertia response to the DFIG wind turbine. Simulations were used to show that with the proposed control system, the DFIG wind turbine can supply considerably greater kinetic energy than a fixed-speed wind turbine.     

双馈风力发电系统最大风能追踪控制的研究

在分析了风力机功率特性和DFIG运行特性的基础上,通过对双馈机转速控制进行最大风能追踪具体过程的深入研究,提出了一种基于最大风能追踪的双馈电机有功、无功功率的解耦控制方法。建立了基于发电机定子磁链定向矢量控制的双馈风力发电系统最大风能追踪系统模型,并利用PSCAD/EMTDC对其进行仿真,结果验证了控制策略的正确性。     

双馈风力发电机组并网控制策略及性能分析

为了实现双馈风力发电机组无冲击电流并网,基于电网电压定向矢量控制技术,提出了一种考虑转子电流动态调节特性的双馈风力发电机组空载并网控制策略。基于Matlab/Simulink仿真平台,建立了双馈风力发电机系统及其并网控制的数学模型,并对不同初始运行转速的双馈风力发电机组的自动并网运行特性进行了仿真。仿真实验结果证明无论初始转速为同步转速,还是超、亚同步转速,利用提出的并网控制策略,双馈风力发电机组能很好快速地建立定子电压,并网过渡过程定子电流基本没有冲击。     

双馈风力发电系统最大风能追踪控制

在分析风力机功率特性和DFIG运行特性的基础上,通过对双馈机转速控制进行最大风能追踪具体过程的深入研究,提出一种基于最大风能追踪的双馈电机有功、无功功率的解耦控制方法。建立了基于发电机定子磁链定向矢量控制的双馈风力发电系统最大风能追踪系统模型,并利用PSCAD／EMTDC对其进行仿真,结果验证了控制策略的正确性。     

Dynamic participation of doubly fed induction generator in automatic generation control

Increasing levels of wind generation have resulted in an urgent need for the assessment of their impact on frequency control of power systems. The displacement of conventional generation with wind generation will result in erosion of system frequency. The paper analyzed the dynamic participation of doubly fed induction generator (DFIG) to system frequency responses of two-area interconnected power system having variety of conventional generating units. Frequency control support function responding proportionally to frequency deviation is proposed to take out the kinetic energy of turbine blades in order to improve the frequency response of the system. Impacts of different wind penetrations in the system and varying active power support from wind farm on frequency control have been investigated. Integral gains of AGC loop are optimized through craziness-based particle swarm optimization (CRPSO) in order to have optimal transient responses of area frequencies, tie-line power deviation and DFIG parameters.     

Modelling and control of variable‐speed multi‐pole permanent magnet synchronous generator wind turbine

Emphasis of this article is on variable‐speed pitch‐controlled wind turbines with multi‐pole permanent magnet synchronous generator (PMSG) and on their extremely soft drive‐train shafts. A model and a control strategy for a full back‐to‐back converter wind turbine with multi‐pole PMSG are described. The model comprises submodels of the aerodynamic rotor, the drive‐train by a two‐mass model, the permanent magnet generator and the full‐scale converter system. The control strategy, which embraces both the wind turbine control itself and the control of the full‐scale converter, has tasks to control independently the active and reactive powers, to assist the power system and to ensure a stable normal operation of the wind turbine itself. A multi‐pole PMSG connected to the grid through a full‐scale converter has no inherent damping, and therefore, such configuration can become practically unstable, if no damping by means of external measures is applied. In this work, the frequency converter is designed to damp actively the drive‐train oscillations, thus ensuring stable operation. The dynamic performance of the presented model and control strategy is assessed and emphasized in normal operation conditions by means of simulations in the power system simulation tool DIgSILENT. Copyright © 2008 John Wiley & Sons, Ltd.     

双馈风力发电机组等效模型对机组暂态稳定性影响

为研究并网双馈风力发电机组的机电耦合作用对机组暂态性能的影响,采用等效集中质量法,在Mat-lab/Simulink环境下,提出一种基于叶片弯曲柔性和传动轴扭转柔性的风力发电机组3质量块等效模型。结合双馈发电机控制策略,分别以额定功率750 kW和3 MW的风力发电机组为例,对其在电网电压跌落和机械扰动两种情况下进行暂态稳定性仿真,并将仿真结果和传统的1质量块、2质量块等效模型的仿真结果进行比较分析。结果表明:随着单机容量的增加,叶片的柔性对机组暂态稳定性的影响逐渐增大,建立3质量块等效模型对研究大容量双馈风力发电机组暂态稳定性是必要和有效的。     

风力发电机大风限速保护方法的研究

小型风力发电机面临的最大难题是其可靠性问题,即大风时的限速保护问题.从能量守恒的角度分析了利用风轮与发电机的功率匹配特性实现风力发电机限速保护的可行性.另外,设计了2台风轮与发电机具有不同匹配特性的300 W/26 V风力发电机,为了使其具有可比性,使用了同样型号的发电机.通过实验测试了风轮的机械输出特性、发电机在输出电压不同时的功率特性和整机的功率输出,实验结果表明,风速12 m/s以下时2台风力机输出功率基本相同,风速12 m/s以上时其中1台随着风速的增加功率不断增加,而另外1台随着风速的增加输出功率不再上升,甚至有点下降,与大风机功率特性相似.