Tunable luminescence and energy transfer properties in YVO<Subscript>4</Subscript>:Bi<Superscript>3+</Superscript>,Ln<Superscript>3+</Superscript> (Ln = Dy,Sm, Eu) phosphors prepared by microwave sintering method

YVO₄:Bi³⁺,Ln³⁺ (Ln?=?Dy, Sm, Eu) phosphors were successful synthesized by microwave sintering method, and characterized by X-ray powder diffraction, scanning electron microscope, photoluminescence spectra, lifetime, quantum efficiency and general structure analysis system structure refinement. Refinement results indicated that the introduced ions occupy the sites of Y³⁺. Under 275 nm excitation, the luminescent intensity of YVO₄:Bi³⁺ samples reach the maximum when Bi³⁺ concentration is 0.02, the broad excitation spectrum of YVO₄:Bi³⁺ has a strongest peak at near 343 nm. Doped Bi³⁺ can effectively improve the emission intensity of YVO₄:Ln³⁺. The energy transfer mechanism of Bi³⁺?→?Ln³⁺ was dipole-quadrupole mechanism of electric multipole interaction. The critical distance (R_c) between Ln³⁺ and Bi³⁺ were calculated by concentration quenching method. Emitting color of YVO₄:Bi³⁺,Ln³⁺ phosphors were tunable by adjusting Ln³⁺ content. In a word, the material has a good application prospects on light emitting diodes.     

Structural and optical characterization of RE (Eu<Superscript>2+</Superscript>, Ce<Superscript>3+</Superscript>) doped SrMg<Subscript>2</Subscript>Al<Subscript>6</Subscript>Si<Subscript>9</Subscript>O<Subscript>30</Subscript> nanocrystalline phosphor

This article present the reports on optical study of Eu²⁺ and Ce³⁺ doped SrMg₂Al₆Si₉O₃₀ phosphors, which has been synthesized by combustion method at 550 °C. Here SrMg₂Al₆Si₉O₃₀:Eu²⁺ emission band observed at 425 nm by keeping the excitation wavelength constant at 342 nm, whereas SrMg₂Al₆Si₉O₃₀:Ce³⁺ ions shows the broad emission band at 383 nm, under 321 nm excitation wavelength, both the emission bands are assigned due to 5d–4f transition respectively. Further, phase purity, morphology and crystallite size are confirmed by XRD, SEM and TEM analysis. However, the TGA analysis is carried out to know the amount of weight lost during the thermal processing. The CIE coordinates of SrMg₂Al₆Si₉O₃₀:Eu²⁺ phosphor is observed at x?=?0.160, y?=?0.102 respectively, which may be used as a blue component for NUV-WLEDs. The critical distance of energy transfer between Ce³⁺ ions and host lattice is found to be 10.65 Å.     

Photoluminescence properties of a novel red-emitting phosphor Ba<Subscript>2</Subscript>LaV<Subscript>3</Subscript>O<Subscript>11</Subscript>:Eu<Superscript>3+</Superscript>

Ba₂LaV₃O₁₁:Eu³⁺ phosphors were firstly synthesized by the traditional solid-state reaction method at 1100 °C. Their luminescence properties were investigated by photoluminescence excitation and emission spectra. The excitation spectrum shows a broad band centered at about 275 nm in the region from 200 to 370 nm, which is attributed to an overlap of the charge transfer transitions of O^2??→?V⁵⁺ and O^2??→?Eu³⁺. The phosphors exhibit the red emissions of Eu³⁺ and the emission intensity ratio of ⁵D₀?→?⁷F₂ to ⁵D₀?→?⁷F₁ is dependent on the Eu³⁺ concentration due to an environment change about Eu³⁺ ions. Concentration quenching occurs at 30 mol% in the phosphors and exchange interaction is its main mechanism. Ba₂LaV₃O₁₁:Eu³⁺ displays tunable CIE color coordinates from yellow orange to red depended on Eu³⁺ content, which may have a potential application for illuminating and display devices.     

The influence of activation of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> polycrystalline matrices by Bi<Superscript>3+</Superscript> ions on the luminescence of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript>

The influence of activation of the Y₂O₃ matrix of the Y₂O₃:Eu³⁺ phosphor by Bi³⁺ ions on the luminescence of Eu³⁺ and Bi³⁺ ions in it and on conditions of the excitation energy transfer to luminescence centers is studied. It is shown that the presence of Bi³⁺ ions leads to the appearance of recombination luminescence with participation of bismuth ions at low concentrations (up to 6–8 at %) of the dominant activator europium and to an increase in the threshold of intrinsic concentration quenching of its luminescence.     

Microstructure and upconversion luminescence of Yb<Superscript>3+</Superscript> and Ho<Superscript>3+</Superscript> co-doped BST thick films

Ba_0.8Sr_0.2TiO₃ (BST) thick films co-doped with Yb³⁺ and Ho³⁺ were fabricated by the screen printing techniques on alumina substrates. The structure and morphology of the BST thick films were studied by XRD and SEM, respectively. After sintered at 1240 °C for 100 min the BST thick films are polycrystalline with a perovskite structure. The upconversion luminescence properties of the RE-doped BST thick films under 800 nm excitation at room temperature were investigated. The upconversion emission bands centered at 470 and 534 nm corresponding to ⁵F₁ → ⁵I₈ and ⁵F₄ → ⁵I₈ transition, respectively were observed, and the upconversion mechanisms were discussed. The dependence of the upconversion emission intensity upon the Ho³⁺ ions concentration was also examined; the emission intensity reaches a maximum value in the sample with 2 mol% Yb³⁺ and 0.250 mol% Ho³⁺ ions. All the results show that the BST thick films co-doped with Yb³⁺ and Ho³⁺ may have potential use for photoelectric devices.     

Hydrothermal synthesis of NaLa(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> octahedrons and tunable luminescence by changing Eu<Superscript>3+</Superscript> concentration and excitation wavelength

NaLa(WO₄)₂:Eu³⁺ phosphors with different Eu³⁺ concentrations have been synthesized by a hydrothermal method. The phase is confirmed by XRD analysis, which shows a pure-phase NaLa(WO₄)₂ XRD pattern for all of NaLa(WO₄)₂:Eu³⁺ phosphors. The SEM and TEM images indicate that all of NaLa(WO₄)₂:Eu³⁺ phosphors have a octahedral morphology. These suggest that the Eu³⁺ doping has no influence on the structure and growth of NaLa(WO₄)₄ particles. By monitoring the emission of Eu³⁺ at 615 nm, NaLa(WO₄)₂:Eu³⁺ phosphors show excitation bands originating from both host and Eu³⁺ ions. Under the excitation at 271 nm corresponding to WO₄ ^2? groups, emission bands coming from the ¹A₁ → ³T₁ transition with the WO₄ ^2? groups and the ⁵D₀ → ⁷F_j (j = 0, 1, 2, 3 and 4) transitions of Eu³⁺ are observed. The emission intensity relating to WO₄ ^2? groups decreases with increasing Eu³⁺ concentration. But emission intensities of Eu³⁺ increase firstly and then decreases because of concentration quenching effect. Under the excitation at 395 nm corresponding to ⁷F₀ → ⁵L₆ transition of Eu³⁺, only characteristic Eu³⁺ emission bands can be observed. The results of this work suggest that tunable luminescence can be obtained for Eu³⁺ doped NaLa(WO₄)₂ phosphors by changing Eu³⁺ concentration and excitation wavelength.     

Synthesis and luminescence properties of LiBaPO<Subscript>4</Subscript>:Bi<Superscript>3+</Superscript> yellow-emitting phosphor for solid-state lighting

Novel LiBaPO₄:Bi³⁺ yellow-emitting phosphor is synthesized by high temperature solid-state reaction method in air. With excitation 260 nm, LiBaPO₄:Bi³⁺ phosphor emits yellow light with the chromaticity coordinate (0.4272, 0.4657) and color rendering index 77.7. Emission band peaking at ~?588 nm of LiBaPO₄:Bi³⁺ phosphor in the range of 400–790 nm is attributed to the ³P₁ → ¹S₀ electron transition of Bi³⁺ ion. Excitation band monitored at 588 nm in the range of 220–300 nm is assigned to the ¹S₀ → ³P₁ electron transition of Bi³⁺ ion. The optimal Bi³⁺ ion concentration in LiBaPO₄:Bi³⁺ phosphor is ~?1.0 mol%. Time resolved spectra and fluorescence lifetime data confirm that there is only Bi³⁺ ion luminous center in LiBaPO₄:Bi³⁺ phosphor. The luminous mechanism is analyzed by configurational coordinate diagram of Bi³⁺ ion. The experiment results are helpful to develop other new Bi³⁺-doped optical materials for solid-state lighting.     

Influence of Mn<Superscript>2+</Superscript> on the up-conversion emission performance of Mn<Superscript>2+</Superscript>, Yb<Superscript>3+</Superscript>, Er<Superscript>3+</Superscript>: ZnWO<Subscript>4</Subscript> green phosphors

The Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors are synthesized successfully through the high temperature solid state reaction method. The micro-structure and morphology have been investigated by means of XRD and EDS. The doped concentrations of Mn²⁺, Yb³⁺, Er³⁺ are measured by ICP. The absorption spectra and emission spectra with different doped concentrations of Mn²⁺ are presented to reveal the influence of Mn²⁺ on the green up-conversion performance. Excited with 970 nm LED, the up-conversion emission peak at 547 nm is obtained and the CIE spectra as well as the green light photo are also presented. The results indicate that the Mn²⁺ ions play the role of the luminescence adjustment in the up-conversion process, which can improve the up-conversion green emission intensity effectively. The luminescence adjustment mechanism of Mn²⁺ ions in Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors has been discussed. The crystal parameters of Dq, B and C are calculated to evaluate the energy level split effect.     

Observation of an ultraviolet emission band in TiO<Subscript>2</Subscript> nanocrystals doped with Eu<Superscript>3+</Superscript>

The photoluminescence spectra of titanium dioxide (TiO₂) nanocrystals doped with Eu³⁺ (molar ratio Eu³⁺/TiO₂ = 0, 1, 2, 4%) are investigated under different excitation wavelengths. An ultraviolet band of emission energy higher than the energy gap is found for excitation wavelengths larger than 315 nm when the Eu³⁺ content is higher than 2%. The new emission band redshifts and its emission intensity is intensified with the increase of excitation wavelength. The emission mechanism for the new ultraviolet emission band is analyzed.     

Color-tunable luminescence properties of Sm<Superscript>3+</Superscript>/Dy<Superscript>3+</Superscript> co-doped NaLa(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphors and their energy transfer mechanism

The Sm³⁺, Dy³⁺ doped and Sm³⁺/Dy³⁺ co-doped NaLa(MoO₄)₂ spherical phosphors were hydrothermally synthesized by the EDTA-2Na mediated method. Under the excitation of 297 nm, the quenching concentration of Sm³⁺ in NaLa(MoO₄)₂ host was determined to be 13%, and the concentration quenching mechanism was discussed to be the electric quadrupole–quadrupole interaction. After Sm³⁺ and Dy³⁺ ions were co-doped into the NaLa(MoO₄)₂ host, the energy transfer behaviors resulted from Dy³⁺ to Sm³⁺ ions were investigated by the help of the luminescent spectra of the obtained phosphors. By varying co-doping concentrations of Sm³⁺/Dy³⁺ ions, the emission color of NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ can be tuned from reddish-orange, pink and white to bluish-green. The CIE chromaticity coordinate, the correlated color temperature and the quantum efficiency of NaLa_0.87(MoO₄)₂:1%Sm³⁺, 12%Dy³⁺ were calculated to be (0.356, 0.320), 4353 K and 20%, respectively. Furthermore, in the temperature-dependent analysis, it presented good thermal stability, which can become a promising single-phased white-emitting phosphor for white LEDs devices. Based on these results, the possible energy transfer mechanism between Dy³⁺ and Sm³⁺ in NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ was also proposed.     

Luminescence studies on Eu<Superscript>2+</Superscript> and Tb<Superscript>3+</Superscript> doped Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript> phosphors

Eu²⁺ and Tb³⁺ doped Ca₂MgSi₂O₇ phosphors were synthesized by conventional solid-state reaction. The phase formation was confirmed by X-ray powder diffraction technique and refined lattice parameters were calculated by rietveld refinement process using Celref v3. The photoluminescence (PL) excitation and emission spectra were investigated. The phosphors exhibited broaden green emitting luminescence peaking at 520 nm when excited at 374 nm source. Morphological studies were carried out using Scanning electron microscopy (SEM) images of the sample with optimum PL emission. The dependence of photoluminescence intensity on co-dopant concentration and the kinetic parameters were also reported. Time resolved fluorescence spectroscopy (TRFS) is used to investigate the decay in luminescence signals with respect to time. The sample proved to be a good long lasting material, which makes it useful in emergency signs, textile printing, textile exit sign boards and electronic instrument dial pads etc.     

Persistent luminescence of Zn<Subscript>2</Subscript>GeO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript>/Pr<Superscript>3+</Superscript> phosphors

Zn₂GeO₄, Zn₂GeO₄:Mn²⁺, Zn₂GeO₄:Pr³⁺ and Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors were fabricated by a solid state reaction. The phase and luminescent properties of the fabricated phosphors were investigated. The XRD patterns show that all of the fabricated phosphors have an orthorhombic structure. The fabricated Zn₂GeO₄ shows an emission band in the range of 350–550 nm. The fabricated Zn₂GeO₄:Mn²⁺ and Zn₂GeO₄:Pr³⁺ phosphors show emission bands corresponding to Mn²⁺ and Pr³⁺ ions, respectively. The fabricated Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor shows the emission band results from Mn²⁺ and the codoped Pr³⁺ enhances the emission intensity of Mn²⁺. Moreover, Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor exhibits longer decay time than that of Zn₂GeO₄:Mn²⁺. The higher intensity and longer lifetime of Mn²⁺ emission are induced by the energy transfer from Pr³⁺ of various vacancies to Mn²⁺ in Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Effect of co-doped Tb<Superscript>3+</Superscript> ions on electroluminescence of ZnO:Eu<Superscript>3+</Superscript> LED

Rare earth (RE) -doped ZnO electroluminescence is worthy of investigation for phosphor-free white light-emitting diodes (LEDs) due to their pure and sharp emissions. Whereas, the low solubility of RE ions in ZnO films is found to hinder the performance of RE-doped ZnO devices. Herein, ZnO:Eu and ZnO:Eu/Tb LEDs were synthesized and the electroluminescence properties were tested. The results show that the emission intensity of ZnO: Eu/Tb LED is 8 times higher than that of ZnO: Eu LED while the input power is smaller when the concentration of terbium is proper. Furthermore, we discussed the excitation mechanism and found that the ratio of the EL intensity of the ⁵D₁ → ⁷F₁ to ⁵D₀ → ⁷F_{J (J=0???4)} transition increases with increasing Tb doping concentration, which may indicate the possibility of energy transfer from Tb³⁺ to Eu³⁺. The results are believed to be an effective strategy to improve the electroluminescence of RE-doped semiconductor for white LEDs.     

Enhanced red-emitting phosphor Na<Subscript>2</Subscript>Ca<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>:Eu<Superscript>3+</Superscript> by charge compensation

A series of novel red-emitting Na₂Ca_3???x Si₂O₈:xEu³⁺ phosphors were synthesized by solid state reactions. The phosphors can strongly absorb 395 nm light, and show red emission with a good color purity. The excitation and emission spectra properties of Na₂Ca₃Si₂O₈:Eu³⁺ were characterized. Na₂Ca₃Si₂O₈:Eu³⁺ with self-compensated and alkali metal ions charge compensated approaches (2Ca²⁺→Eu³⁺ + M⁺, M?=?Li⁺, Na⁺, K⁺) have investigated, which found that the red emission of luminescent intensity can be greatly enhanced, and shows superior luminescent property to the commercial Y₂0₃S:Eu³⁺. The present work implies that the efficient charge compensated phosphors are promising candidates as red-emitting phosphor for w-LEDs.     

Synthesis and annealing effects on the optical spectroscopy properties of red-emitting Gd(P<Subscript>0.5</Subscript>V<Subscript>0.5</Subscript>)O<Subscript>4</Subscript>: x at.% Eu<Superscript>3+</Superscript>

In this work, Gd(P_0.5V_0.5)O₄: x at.% Eu³⁺ phosphors with different dopant concentrations (x?=?1, 3, 5, 6, 7, 9) were synthesized through chemical coprecipitation method. The phosphors were characterized by XRD, SEM, infrared spectroscopy, photoluminescence excitation, emission spectra and CIE. The results of XRD indicate that the obtained phosphors have the tetragonal phase structure. Eu³⁺ emission transitions arise mainly from the ⁵D₀ level to the ⁷F_J (J?=?0, 1, 2, 3, 4) manifolds. The emission intensity and crystalline of Gd(P_0.5V_0.5)O₄:x at% Eu³⁺ powders are increasing with annealing temperature at 600, 800, 1000, 1100, and 1200 °C, respectively. The introduction of VO₄^3? can broaden the range of UV excitation spectrum wavelength and enhance the transition between ⁵D₀ → ⁷F₁ to ⁵D₀ → ⁷F₂ for long wavelength emission. And the most dominant emission peak of Eu³⁺ for ⁵D₀ → ⁷F₂ transition is closer to pure red light at 622 nm. The maximum emission intensity of the phosphors is the concentration of 6 at.% Eu³⁺ because of the distance of the neighbor Eu³⁺ ions reaching a certain critical value and the influence of multipolar interaction. Compared to commercial phosphors Y₂O₃:Eu³⁺ and (Y,Gd)BO₃:Eu³⁺, our work yielded a longer wavelength red light emission intensity and a higher proportion of red light to orange light. All our results indicate that color purity of this phosphor turns it into a promising red phosphor in ultraviolet-pumped light-emitting diodes.     

Tunable luminescence of SrLaMgTaO<Subscript>6</Subscript>:Sm<Superscript>3+</Superscript> phosphors due to energy transfer from TaO<Subscript>6</Subscript> group to Sm<Superscript>3+</Superscript> ion

A series of SrLaMgTaO₆:Sm³⁺ phosphors were synthesized through a solid state reaction. The phase, microstructure and luminescent properties of the synthesized phosphors were investigated through techniques of XRD, SEM and spectrophotometer. The XRD patterns show that the synthesized phosphors have the same phase structure. The SEM images show that the synthesized phosphors are microcrystallines in the range of 1.2–3.4 µm. SrLaMgTaO₆:Sm³⁺ phosphors present emission bands originating from TaO₆ group and Sm³⁺ ions. The critical concentration of Sm³⁺ in SrLaMgTaO₆ is found to be 7 mol%. Due to energy transfer from TaO₆ group to Sm³⁺, tunable luminescence is obtained by changing Sm³⁺ doping concentration.     

Combustion synthesis and photoluminescence study of UV emitting LaBaB<Subscript>9</Subscript>O<Subscript>16</Subscript> phosphors

The borate phosphor LaBaB₉O₁₆ doped with Ce³⁺ ion intentionally and successfully synthesized using solution combustion rout using metal nitrates as precursors and urea as fuel. The phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy and photoluminescence spectroscopies. The XRD patterns of the phosphor confirmed the successful crystallization of LaBaB₉O₁₆. The average crystallite size calculated using the Debye Scherer equation. The PL excitation spectra of LaBaB₉O₁₆ exhibited broad spectra peaking at 275 nm. Upon excitation with ultraviolet (UV) radiation at 274 nm the phosphor exhibited a broad band UV emission peaking at a wavelength of 335 nm corresponding to the 4f⁰5d¹??4f¹ transition of the Ce³⁺ ion. Moreover the influence of concentration of Ce³⁺ ion on luminescence properties has also been studied. Optimum concentration of Ce³⁺ ions in the prepared phosphor was found to be 0.05 mol. For this concentration the critical distance R₀ was calculated to be 22.04 Å. Finally, the Stokes shift for the synthesized phosphor was calculated to be 6512 cm^??1 using corresponding excitation and emission.     

Synthesis and photoluminescence study of narrow-band UVB-emitting LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>:Gd<Superscript>3+</Superscript>, Pr<Superscript>3+</Superscript> phosphor

A series of Pr³⁺, Gd³⁺ and Pr³⁺–Gd³⁺-doped inorganic borate phosphors LiSr₄(BO₃)₃ were successfully synthesized by a modified solid-state diffusion method. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. Surface morphology of the sample was studied by scanning electronic microscopy (SEM). The optimal concentrations of dopant Gd³⁺ ions in compound LiSr₄(BO₃)₃ were determined through the measurements of photoluminescence (PL) spectra of phosphors. Gd³⁺-doped phosphors LiSr₄(BO₃)₃ show strong band absorption in UV spectral region and narrow-band UVB emission under the excitation of 276 nm was only due to ⁶P _J → ⁸S_7/2 transition of Gd³⁺ ions. The effect of Pr³⁺ ion on excitation of LiSr₄(BO₃)₃:Gd³⁺ was also studied. The excitation of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ gives a broad-band spectra, which show very good overlap with the Hg 253.7 nm line. The photoluminescence spectra of LiSr₄(BO₃)₃ with different doping concentrations Pr³⁺ and keeping the concentration of Gd³⁺ constant at 0.03 mol have also been studied. The emission intensity of LiSr₄(BO₃)₃:Pr³⁺–Gd³⁺ phosphors increases with increasing Pr³⁺ doping concentration and reaches a maximum at 0.01 mol. From the photoluminescence study of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ we conclude that there was efficient energy transfer from Pr³⁺→ Gd³⁺ ions in LiSr_4?x?y Pr _x Gd _y (BO₃)₃ phosphors.     

Emission analysis of Pr<Superscript>3+</Superscript> &; Ho<Superscript>3+</Superscript>: Ca<Subscript>4</Subscript>GdO(BO<Subscript>3</Subscript>)<Subscript>3</Subscript> powder phosphors

Emission spectral results of Pr³⁺ & Ho³⁺ ions doped Ca₄GdO(BO₃)₃ powder phosphors are reported here. XRD, SEM and FTIR measurements have been carried out for them. The emission spectrum of Pr³⁺: Ca₄GdO(BO₃)₃ has shown an emission transition ¹D₂ → ³H₄ at 606 nm with λ_exci = 480 nm (³H₄ → ³P₀) and Ho³⁺: Ca₄GdO(BO₃)₃ phosphor has shown an emission transition ⁵S₂ → ⁵I₈ at 549 nm with λ_exci = 447 nm (⁵I₈ → ⁵F₁). Emission performances of these two phosphors have been explained in terms of energy level diagrams.