Reduced Switch Count DC-Link AC–AC Five-Leg Converter

This paper investigates a reduced switch count dc-link ac–ac five-leg converter for three-phase power conversion. The converter provides both an input rectifier and an output inverter by sharing a leg in order to reduce the number of power switches. Scalar and vector pulsewidth modulation techniques are presented and the concepts of local and global apportioning factors are introduced. A control technique that aims at maximizing the utilization of the dc-link voltage is proposed. A hysteresis current controller that allows operating with one leg being shared by the load and grid sides is developed. In addition, several relevant characteristics of the converter are addressed, such as voltage capability, harmonic distortion, shared-leg and capacitor currents, and power rating. The features of such a converter are compared to those of the six-leg and four-leg converters. Selected experimental results are presented.     

Analysis and Implementation of a Hybrid High-Power-Factor Three-Phase Unidirectional Rectifier

This paper describes the conception and analysis of a unidirectional hybrid three-phase rectifier suitable for medium- and high-power applications. The rectifier is composed of a single-switch diode bridge boost-type rectifier in parallel with a pulsewidth modulation (PWM) three-phase unidirectional boost rectifier. The objective is to obtain a structure capable of providing sinusoidal input currents with low harmonic distortion and dc output voltage regulation. The diode rectifier operates at low frequency and has a higher output power rating. Therefore, the PWM unidirectional rectifier is designed to operate with a small power rating and at a high switching frequency. The total harmonic distortion of the proposed structure varies between 0% and 32%, depending only on the amount of power processed by the PWM three-phase unidirectional rectifier. The rectifier topology conception, principle of operation, control scheme, and simulation and experimental results of a 20-kW laboratory prototype are also presented in this paper.     

Programmable PFC based hybrid multipulse power rectifier for ultra clean power application

A novel hybrid three-phase rectifier is proposed. It is capable to achieve high input power factor (PF) and low total harmonic input currents distortion (THD/sub I/). The proposed hybrid high power rectifier is composed by a standard three-phase six-pulse diode rectifier (Graetz bridge) with a parallel connection of single-phase Sepic rectifiers in each three-phase rectifier leg. Such topology results in a structure capable of programming the input current waveform and providing conditions for obtaining high input power factor and low harmonic current distortion. In order to validate the proposed hybrid rectifier, this work describes its principles, with detailed operation, simulation, experimental results, and discussions on power rating of the required Sepic converters as related to the desired total harmonic current distortion. It is demonstrated that only a fraction of the output power is processed through the Sepic converters, making the proposed solution economically viable for very high power installations, with fast investment payback. Moreover, retrofitting to existing installations is also feasible since the parallel path can be easily controlled by integration with the existing dc-link. A prototype has been implemented in the laboratory and it was fully demonstrated to both operate with excellent performance and be feasibly implemented in higher power applications.     

A high-power-factor, three-phase isolated AC-DC converter using high-frequency current injection

A single-stage, three-phase AC-to-DC converter topology is proposed for high-frequency power supply applications. The principal features of the circuit include continuous current operation of the three AC input inductors, inherent shaping of the input currents, resulting in high power factor, a transformer isolated output, and only two active devices are required, both soft-switched. Resonant conversion techniques are used, and a high power factor is achieved by injecting high-frequency currents into the three-phase rectifier, producing a high frequency modulation of the rectifier input voltages. The current injection principle is explained and the system operation is confirmed by a combination of simulation and experimental results.     

High static gain single-phase PFC based on a hybrid boost converter

In this paper, a single-phase unity power factor rectifier, based on a hybrid boost converter, resulting from the integration of a conventional dc–dc boost converter and a switched-capacitor voltage doubler is proposed, analysed, designed and tested. The high-power rectifier is controlled by two feedback loops with the same control strategy employed in the conventional boost-based rectifier. The main feature of the proposed rectifier is its ability to output a dc voltage larger than the double of the peak value of the input line voltage, while subjecting the power switches to half of the dc-link voltage, which contributes to reducing the cost and increasing the efficiency. Experimental data were obtained from a laboratory prototype with an input voltage of 220 Vrms, line frequency of 60 Hz, output voltage of 800 Vdc, load power of 1000 W and switching frequency of 50 kHz. The efficiency of the prototype, measured in the laboratory, was 96.5% for full load and 97% for half load.     

A New Control Method for Input–Output Harmonic Elimination of the PWM Boost-Type Rectifier Under Extreme Unbalanced Operating Conditions

Under severe fault conditions in the distribution system, not only input voltages but also input impedances must be considered as unbalanced. This paper presents a new control method for input–output harmonic elimination of the pulsewidth-modulation (PWM) boost-type rectifier under conditions of both unbalanced input voltages and unbalanced input impedances. The range of imbalance in both input voltages and input impedances, for which the proposed method is valid, is analyzed in detail. An analytical approach for complete harmonic elimination shows that PWM boost-type rectifier can operate at unity power factor under extremely unbalanced operating conditions resulting in a smooth (constant) power flow from ac to dc side. Based on the analyses in open-loop configuration, a feedforward control method is proposed. Elimination of harmonics at ac and dc side of the converter affects the cost of dc link capacitor and ac side filter. The proposed method is very useful when the PWM boost-type rectifier is subject to extreme imbalance due to severe fault conditions in the power system. In addition, by using the proposed method, the PWM boost-type rectifier can be operated from the single-phase supply in cases where three-phase source is not available. Simulation results show excellent response and stable operation of the PWM boost-type rectifier under the proposed control algorithm. Experimental and simulation results are in excellent agreement.      

Digital-signal-processor-based control of three-phase space vectormodulated converters

The paper presents the implementation of a DSP-based controller for three-phase, space-vector modulated converters. The implementation is illustrated for the control of a 2 kW, ZVS matrix power converter-based three-phase PWM rectifier. The controller features very high data processing speed (converter switching frequency of 100 kHz), and provides high-quality, low-distortion power converter input currents and output voltages. The controller can be implemented using only a few standard integrated circuits, providing high reliability and low cost     

Analysis of the Instantaneous Power Flow for Three-Phase PWM Boost Rectifier Under Unbalanced Supply Voltage Conditions

This paper proposes the analysis of the instantaneous power flow of three-phase pulse-width modulation (PWM) boost rectifier under unbalanced supply voltage conditions. An analytical expression for the instantaneous output power has been derived, which provides the link between the output dc link voltage and the instantaneous output power. A direct relationship between the dc link voltage ripples and the second harmonic component in the instantaneous output power has been established. Based on the input and output instantaneous power analytical expressions provided, the presence of the odd order harmonic components in the ac line currents can be explained. A simple cascaded PI control scheme has been developed for the dc output voltage control. The controller ensures that the dc link voltage is maintained constant and the supply side power factor is kept close to unity under the unbalanced supply voltage operating conditions. Simulation and experimental test results are provided on a 1.6-kVA laboratory-based PWM rectifier to validate the proposed analysis and control scheme.      

A High-Quality Rectifier Based on Sheppard–Taylor Converter Operating in Discontinuous Capacitor Voltage Mode

This paper presents a single-phase soft-switched high power factor (PF) Sheppard-Taylor rectifier suitable for applications requiring low-voltage and high-current output. The proposed rectifier is designed to operate at discontinuous capacitor voltage mode. The Sheppard-Taylor converter in this mode of operation provides zero-voltage turnoff switching, as well as natural input PF correction over a wide range of input voltage, which makes the converter suitable for universal input applications. Due to its simplified control circuitry and reduced switch current stress, this converter presents better efficiency and higher reliability. In addition, the presented converter features continuous input-output currents, which result in low electromagnetic interference emission. Principle of operation, theoretical analysis, and experimental results from a laboratory prototype rated at 45 W/10 Vdc output voltage are presented. The measured efficiency and total harmonic distortion of the input line current were 85% and 3.2%, respectively. The input current harmonics meet the EN61000-3-2 Class D requirements.     

Three-Phase Rectifier With Near Sinusoidal Input Currents and Capacitors Connected on the AC Side

An analysis of a three-phase low-harmonic diode rectifier equipped with inductors, capacitors connected on the ac side, and diodes is presented. Inductors and capacitors are used in conjunction with the three-phase diode bridge rectifier to improve the waveform of the currents drawn from the utility grid. The operation of the proposed converter is analyzed, and on this basis, design considerations are commented. The converter characteristics are determined as a function of the load current. Comparisons between the studied converter and other rectifiers (classical rectifiers with passive or active filters, three-phase rectifiers with near sinusoidal input currents and capacitors connected on the dc side, and three-phase low-harmonic rectifiers applying the third harmonic current injection) are also presented. Several possible applications of the two variants of the three-phase rectifiers with near sinusoidal input currents (with capacitors connected on the dc side or on the ac side) are mentioned. Analytically derived results are experimentally verified     

Single-stage three-phase buck-boost type AC-DC converter with highpower factor

A new control process for single-stage three-phase buck-boost type AC-DC power converters with high power factor, sinusoidal input currents and adjustable output voltage is proposed. This converter allows variable power factor operation, but this work focus on achieving unity power factor. The proposed control method includes a fast and robust input current controller based on a vectorial sliding mode approach. The active nonlinear control strategy applied to this power converter, allows high quality input currents. Given the comparatively slow dynamics of the DC output voltage, a proportional integral (PI) controller is adopted to regulate the converter output voltage. The voltage controller modulates the amplitudes of the current references, which are sinusoidal and synchronous with the input source voltages. Experimental results from a laboratory prototype show the high power factor and the low harmonic distortion characteristics of the circuit     

Control Design of a Three-Phase Matrix-Converter-Based AC–AC Mobile Utility Power Supply

This paper describes the control analysis and design of an ac-to-ac three-phase mobile utility power supply using a matrix converter capable of high-quality 50-, 60-, and 400-Hz output voltage and reduced input harmonic distortion. Instead of the traditional structure employing a diode bridge rectifier, a dc link and a pulsewidth-modulated inverter, a three-phase-to-three-phase direct ac-ac (matrix) converter has been used as the power-conditioning core of the system, working in conjunction with input and output LC low-pass filters. An optimizing control design method using a genetic algorithm approach has been used, which yields designs to minimize a cost function, taking into account transient and steady-state output voltage performance targets, together with robustness to different operative conditions and system parameters drift. Simulation and experimental tests have demonstrated that the system meets the power-quality requirements of the application.     

A three-phase ZVS PWM DC/DC converter with asymmetrical duty cycle associated with a three-phase version of the hybridge rectifier

This paper proposes the use of a three-phase version of the hybridge rectifier in the three-phase zero-voltage switch (ZVS) DC/DC converter with asymmetrical duty cycle. The use of this new rectifier improves the efficiency of the converter because only three diodes are responsible for the conduction losses in the secondary side. The current in the secondary side of the transformer is half the output current. In addition to this, all the advantages of the three-phase DC/DC converter, i.e., the increased frequency of the output and input currents, the improved distribution of the losses, as well as the soft commutation for a wide load range, are preserved. Therefore, the resulting topology is capable of achieving high efficiency and high power density at high power levels. The theoretical analysis, simulation, and experimental results obtained from a 6-kW prototype, and also a comparison of the efficiency of this converter with the full-bridge rectifier are presented.     

A constant output current three-phase diode bridge rectifier employing a novel "Electronic Smoothing Inductor"

This paper presents an improvement of the well-known conventional three-phase diode bridge rectifier with dc output capacitor. The proposed circuit increases the power factor (PF) at the ac input and reduces the ripple current stress on the smoothing capacitor. The basic concept is the arrangement of an active voltage source between the output of the diode bridge and the smoothing capacitor which is controlled in a way that it emulates an ideal smoothing inductor. With this the input currents of the diode bridge which usually show high peak amplitudes are converted into a 120/spl deg/ rectangular shape which ideally results in a total PF of 0.955. The active voltage source mentioned before is realized by a low-voltage switch-mode converter stage of small power rating as compared to the output power of the rectifier. Starting with a brief discussion of basic three-phase rectifier techniques and of the drawbacks of three-phase diode bridge rectifiers with capacitive smoothing, the concept of the proposed active smoothing is described and the stationary operation is analyzed. Furthermore, control concepts as well as design considerations and analyses of the dynamic systems behavior are given. Finally, measurements taken from a laboratory model are presented.     

Control of a Cascade STATCOM With Star Configuration Under Unbalanced Conditions

A control scheme for star-connected cascade static synchronous compensators (STATCOMs) operating under unbalanced conditions is proposed. The STATCOM is assumed to be connected to an equivalent three-phase star-connected power supply. By selecting the line-to-neutral voltages of the equivalent power supply, zero average active power in each phase can be obtained under unbalanced compensation currents or unbalanced supply voltages. Furthermore, to implement a separate control for the three-phase dc-link voltages, the average active power in each phase can also be adjusted to a target value determined by the dc-link voltage control loop. Then, by forcing the converter neutral voltage to be equal to the counterpart of the equivalent power supply, the STATCOM can be decoupled into three single-phase systems and the line-to-neutral voltage of the equivalent power supply can be used as the input voltage to the corresponding phase leg. Accordingly, reference current tracking and dc-link voltage maintaining can be simultaneously achieved under unbalanced conditions. The valid operating range of the star-connected cascade STATCOM under unbalanced conditions is also analyzed. The proposed control scheme has been tested using the power systems computer-aided design/electromagnetic transient in dc system (EMTDC) simulation results and the experimental results based on a 30-kVAr cascade STATCOM laboratory prototype are proposed.      

Three-level LLC series resonant DC/DC converter

Paper presents a three-level soft switching LLC series resonant dc/dc converter. Zero-voltage switching (ZVS) is achieved for each main switch without any auxiliary circuit. Voltage stress of each main switch is half of input voltage. Zero-current-switching (ZCS) is achieved for rectifier diodes. Wide input/output range can be achieved under low frequency range because of two-stage resonance. Only one magnetic component is required in this converter. Efficiency is higher in high line input, so this converter is a preferable candidate for power products with the requirement of hold up time. For design convenience, relationship between dc gain and switching frequency, load resistance is deduced. Its open load characteristic and short load characteristic are exposed to provide theory basis for no load operation and over current protection. Design consideration of four dead times is presented to assure that voltage stress for main switches is within half of input voltage and ZVS for each main switch is achieved. Finally the principle of operation and the characteristics of the presented converter are verified on a 500V-700V input 54V/10A output experimental prototype, whose efficiency reaches 94.7% under rating condition.     

A Three-Phase Current-Fed Push–Pull DC–DC Converter

In this paper, a new three-phase current-fed push–pull dc–dc converter is proposed. This converter uses a high-frequency three-phase transformer that provides galvanic isolation between the power source and the load. The three active switches are connected to the same reference, which simplifies the gate drive circuitry. Reduction of the input current ripple and the output voltage ripple is achieved by means of an inductor and a capacitor, whose volumes are smaller than in equivalent single-phase topologies. The three-phase dc–dc conversion also helps in loss distribution, allowing the use of lower cost switches. These characteristics make this converter suitable for applications where low-voltage power sources are used and the associated currents are high, such as in fuel cells, photovoltaic arrays, and batteries. The theoretical analysis, a simplified design example, and the experimental results for a 1-kW prototype will be presented for two operation regions. The prototype was designed for a switching frequency of 40 kHz, an input voltage of 120 V, and an output voltage of 400 V.      

三相整流桥直流侧和交流侧并联型有源电力滤波器比较研究

三相直流侧和交流侧有源电力滤波器均可用于三相不可控整流桥的谐波治理。从谐波补偿效果、有源滤波器的补偿容量、开关应力三个方面对二者进行了分析和对比。分析结果表明,由于直流侧有源电力滤波器并联在整流桥的直流侧,在换相处的负载电流变化率比交流侧小得多,因此直流侧有源电力滤波器的补偿性能优于交流侧有源电力滤波器。同时由于直流侧有源电力滤波器工作在电压电流两个象限,因此其补偿容量和开关应力远小于交流侧有源电力滤波器。     

Control of Single-Phase-to-Three-Phase AC/DC/AC PWM Converters for Induction Motor Drives

This paper proposes a novel control scheme of single-phase-to-three-phase pulsewidth-modulation (PWM) converters for low-power three-phase induction motor drives, where a single-phase half-bridge PWM rectifier and a two-leg inverter are used. With this converter topology, the number of switching devices is reduced to six from ten in the case of full-bridge rectifier and three-leg inverter systems. In addition, the source voltage sensor is eliminated with a state observer, which controls the deviation between the model current and the system current to be zero. A simple scalar voltage modulation method is used for a two-leg inverter, and a new technique to eliminate the effect of the dc-link voltage ripple on the inverter output current is proposed. Although the converter topology itself is of lower cost than the conventional one, it retains the same functions such as sinusoidal input current, unity power factor, dc-link voltage control, bidirectional power flow, and variable-voltage and variable-frequency output voltage. The experimental results for the V/f control of 3-hp induction motor drives controlled by a digital signal processor TMS320C31 chip have verified the effectiveness of the proposed scheme     

Frequency tunable low ripple and fast response on-chip DC–DC converter for DVFS

Dynamic voltage and frequency scaling (DVFS) is an efficient method to reduce the power consumption in system on-chip. To support DVFS, multiple supply voltages are generated based on different work load frequencies and currents using on-chip DC–DC voltage converter. In this paper a frequency tunable multiple output voltage switched capacitor based dc–dc converter is presented. An analog to digital converter and phase controller is used in the feedback to change the switching frequency and duty cycle of the converter. An input voltage of 1.8 V is converted to 0.6 and 0.8 V for low and high signal frequency respectively. The proposed 2-phase switched capacitor architecture with gain setting of 1:2 is designed with the 90 nm technology. An output ripple of 45 mV is observed and the maximum transient response time of the converter is 17.3 ns (= 58 MHz).