共查询到20条相似文献,搜索用时 661 毫秒
1.
水中溶解性有机物分子量分布测定方法评价 总被引:12,自引:0,他引:12
文章介绍了两种测定水中有机物分子量分布的方法 :滤膜过滤法及凝胶液相色谱法 ,并列出了一些研究者用两种方法测定水源水的结果 ,根据两种方法的测定原理、测定步骤及对数据的分析 ,作者认为滤膜法应视作为一种粗略的方法 ,有条件时应尽量采用凝胶色谱法 相似文献
2.
介绍了折光法、紫外光谱法、裂解气相法、核磁共振法、红外光法等5种常见的丁苯橡胶微观结构表征方法。其中,折光法、裂解气相色谱法和紫外光谱法能够测定SBR的苯乙烯含量,核磁共振法和红外光谱法都能够测定全部四种微观结构;五种测试方法中,核磁共振法测试重复性最好,裂解气相色谱法最差;裂解气相色谱法样品处理最简单,紫外光谱法样品处理最繁琐;折光法和核磁共振法无需标准品标定,其余三种方法需使用已知结构的SBR标准品标定。 相似文献
3.
4.
5.
主要介绍了几种新型分析方法在汽油辛烷值测定中的应用,包括介电常数法、近红外光谱法、核磁共振法、气相色谱法以及其他方法,着重介绍了这几种方法的原理、优缺点及其应用前景。 相似文献
6.
介绍了VOCs的定义和目标化合物、空气中VOCs三种采样法及两种样品解吸法中存在的问题和气相色谱法测定VOCs方法,并指出了VOCs测定过程质量控制. 相似文献
7.
8.
9.
不同磷酸含量测定方法的比较研究 总被引:1,自引:0,他引:1
《广东化工》2015,(20)
分析比较了重量法、容量法、钼酸铵分光光度法和离子色谱法测定磷酸中磷酸含量的结果,4种方法测定结果的相对标准偏差均小于3%,钼酸铵分光光度法的加标回收率为95.28%~105.87%,离子色谱法的加标回收率为98.80%~104.05%。研究结果表明钼酸铵分光光度法和离子色谱法可作为糖厂磷酸中磷酸含量的测定方法。 相似文献
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
在安全生产系统中,人的素质是占主导地位的,人的行为贯穿生产过程的每一个环节。企业安全要以人为核心,树立人本观念。安全管理必须重视人的因素,提高人的素质,从精神上、物质上关心人尊重人,以有效的手段约束和激励人,加大安全投入、落实有效措施,保障个人的利益,使大家找到归属感,保护员工身体健康和生命安全,最终形成安全管理"命运共同体",推动企业发展和提高。 相似文献
13.
In the present article, chitin from crab shell was systematically deacetylated using a NaOH treatment with control of the reaction time. The degree of deacetylation, monitored using solid-state NMR, revealed that the reaction was pseudo-first order. Based on this, swollen and NaOH-saturated particles are proposed as the reaction system. The weight loss of the partially saponified and neutralized samples after HCl hydrolysis increased linearly with the degree of deacetylation. The crystallinity of the samples was found to increase after acid hydrolysis. According to conductimetric titration, the surface charge density of the crystallites, after acid hydrolysis, was found to increase with base treatment time. The effect of surface charge on the formation of a chiral nematic phase, due to the rodlike nature of the crystallites, was explored. These results show that because the contribution of charged particles to the ionic strength was significant the double layer compression was affected, especially since the surface charge density was close to the Manning limit. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:373–380, 1997 相似文献
14.
15.
徐善明 《现代塑料加工应用》2008,20(5)
应用管理学和市场营销学的基本原理和方法,深入分析我国聚丙烯工业的内部和外部环境、市场状况以及加入WTO后所面临的机遇与挑战.在此基础上,应用SWTO(态势分析法),确认出主要的优势和劣势、机会和威胁,对我国聚丙烯工业的国际竞争力进行结构化的综合分析. 相似文献
16.
17.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
18.
为了研究超聚能射流形成过程中辅助药型罩材料对射流性能的影响,利用AUTODYN-2D软件,采用高精度多物质求解器Euler-2D Multi-material对辅助药型罩材料分别为Wu、Cu、Fe,锥形药型罩材料为Al的截顶辅助药型罩超聚能装药进行模拟。结果表明,与传统聚能装药相比,超聚能装药结构形成的射流性能更优。辅助药型罩材料密度越大,超聚能射流形态和连续性越好;超聚能射流具有更高的头部速度和能量。用Wu、Cu、Fe作辅助药型罩材料时,超聚能射流的最大速度分别为14 400、13 300和13 100m/s,最大能量分别为10.2×10~7、8.5×10~7、7.5×10~7 J/kg,并且材料密度越大,起爆后相同时刻的射流形态越细越长。 相似文献
19.
20.
A. A. Konnov 《Combustion, Explosion, and Shock Waves》2005,41(5):496-503
A simple phenomenological diffusive-thermal model of cellular instability of premixed flames of ternary mixtures is developed
and presented. The model shows that preferential diffusion can alter stoichiometry of the mixture, i.e., the ratio of the
fuel and oxidizer concentrations, and also its effective dilution by an inert. Key parameters of the model are estimated using
numerical modeling of burning velocities. Laminar burning velocities are calculated for hydrogen-oxygen-nitrogen, methane-oxygen-nitrogen,
and propane-oxygen-nitrogen mixtures. Conditions for the appearance of cellular instability in ternary mixtures are determined
and compared with experiments. In good agreement with experimental observations, the diffusive-thermal instability is predicted
in hydrogen flames with equivalence ratios φ ≲ 1.45, in lean methane flames with φ ≲ 1.02, and in rich propane flames with
φ ≳ 1.03. The magnitude of the change in the local flame velocity due to preferential diffusion is evaluated. It is demonstrated
that nitrogen diffuses faster than oxygen in hydrogen-air and methane-air flames, while oxygen diffuses faster than nitrogen
in flames of propane and other heavier hydrocarbons. In mixtures of air with propane or heavier hydrocarbons, the transition
between stable and unstable regimes is predicted in mixtures that are leaner than the mixture corresponding to the peak of
the burning velocity curve, in agreement with experimental observations.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 5, pp. 14–22, September–October, 2005. 相似文献