共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
5.
基于工作空间最大化的平面柔索驱动并联机构优化设计 总被引:5,自引:2,他引:5
工作空间是并联机构的重要指标,柔索驱动并联机构与杆支撑并联机构相比,其突出的优点是具有较大的工作空间.从平面柔索驱动并联机构出发,探讨柔索与动平台的连接位置对定姿态工作空间大小的影响.建立柔索驱动并联机构静力模型,并对4根柔索驱动的3自由度平面机构的定姿态工作空间进行分析,对此类机构的柔索与动平台的连接位置参数进行建模,通过直接搜索的优化算法对这些位置参数进行优化,得到了最优的结构参数.与常用的平面构型相对比,优化后的机构构型具有更大的定姿态工作空间. 相似文献
6.
结合现有并联机构与柔索并联机构的特点,设计出一种刚柔结合的并联机构。在机构中加入柔索,达到提高机构精度、减小机构振动的目的。首先系统介绍了机构的构型,然后应用ADAMS仿真软件建立了并联机构的虚拟样机模型,进行了运动学仿真分析,证明了机构设计的合理性。 相似文献
7.
并联机构的静刚度大、动力响应迅速等优点,使其在金属切削机床、工业自动化、医疗设备等领域具有广泛的应用前景;然而,并联机构在运动学、动力学等方面上的复杂特性使它在实际应用遇到许多困难。从传统并联机构的性能出发,结合并联柔索机构的特点,提出了一种基于刚柔结合的并联机构的新构型。对基于刚柔结合的并联机构进行构型设计,在此基础上,对影响机构精度的主要因素和误差问题进行分析。基于刚柔结合的并联机构在保持机构原有特点的基础上,提高了机构的精度和动力学性能,并有效的抑制了机构在运动过程中的振动问题,为机构的应用奠定了良好的基础。 相似文献
8.
9.
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
15.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献