The role of extracellular polymeric substances on the sorption of natural organic matter

In this study, the influence of extracellular polymeric substances (EPS) composition and quantity was explored for biosorption of natural organic matter (NOM), using variants of Pseudomonas aeruginosa and Pseudomonas putida. Model EPS (sodium alginate beads) were tested and sorption capacity for NOM was also elucidated. In the absence of divalent ions, minimal NOM biosorption was observed and differences among strains were negligible. Under presence of divalent ions, biosorption of NOM was proportional to the amount of EPS secreted by P. aeruginosa variants. For sorption tests with model EPS, divalent ions also promoted biosorption of tested NOM, and total biosorption was also proportional to alginate quantity. Carboxyl group content in both alginate EPS and NOM appeared to be linked to increased biosorption via bridging with divalent ions. The alginate overproducing strain possessed more potential NOM biosorption sites, while the wild-type and alginate deficient strains possessed fewer potential binding sites. In comparison, P. putida, secreting protein-based EPS, behaved differently for NOM biosorption, due to its hydrophobicity and the structural characteristics of proteins. Hydrophobic interactions appeared to enhance the biosorption of more hydrophobic Suwannee River humic acid by P. putida, whose biosorption of more hydrophilic NOM variants was similar to the alginate deficient strain. Mechanistically, the presence of a diffuse electrical double layer will present potential energy barriers limiting biosorption; however, divalent ion concentrations in the aquatic environment will promote biosorption processes, permitting functional group interactions between EPS and NOM. Bridging between hydrophilic carboxyl groups on alginate EPS and NOM appeared to be the dominant form of biosorption, while hydrophobic interactions enhanced biosorption for protein-based EPS.     

Biosorption of humic and fulvic acids to live activated sludge biomass

Biosorption of high molecular weight humic substances (HS) to activated sludge (AS) biomass may be considered as a preliminary step previous to enzymatic hydrolysis breakdown and biological uptake. Two standard HS, Suwannee River humic and fulvic acids, were biosorbed onto live AS biomass collected from full-scale wastewater treatment plants. Biosorption isotherms were corrected for interference from organic matter desorbed from AS biomass. The effect of pH, calcium and ionic strength on biosorption was tested. HS biosorption to live AS biomass obeyed the Freundlich isotherm equation. Biosorption increased with decreasing pH, increasing calcium and ionic strength concentration. Higher biosorption at low pH may be attributed to hydrophobic interactions between HS and AS biomass extracellular polymers (EPS). Hydrophobic and cationic bridging effects between HS and AS EPS were the mechanisms responsible for biosorption under the presence of divalent cations; however, the former was most significant at low pH, whereas the latter was predominant near neutral pH. The effect of ionic strength on HS biosorption followed the colloidal chemistry theory as the electric double layer became compressed when the ionic strength increased, resulting in closer approach of HS and AS biomass. The humic acid fraction of Suwannee River was removed more efficiently than its fulvic acid fraction because the humic acid was more hydrophobic. These results showed that pH, divalent cation concentration and ionic strength play an important role in the fate and removal of influent wastewater HS in full-scale treatment plants.     

Removal of 17α‐ethinylestradiol,salicylic acid,trimethoprim, carbamazepine and nonylphenol through biological carbon and nitrogen removal processes

This study investigated five different trace organic contaminants (TOrCs) (one hormone: 17α‐ethinylestradiol (EE2), two pharmaceuticals: salicylic acid (SA) and trimethoprim (TMP), one analgesic drug: carbamazepine (CBZ), and one surfactant metabolite: nonylphenol (NP)) removal efficiency at a full‐scale Advanced Wastewater Treatment Plant (AWTP). The AWTP achieved average EE2, SA and NP removal over 80% at the biological carbon removal stages. The results also showed a 66% removal of TMP at the nitrogen removal stages. CBZ was recalcitrant throughout the plant, due to its high solubility and low distribution coefficient between wastewater and sludge. Batch experiments were conducted on active and inactive secondary, nitrification and denitrification sludge by adding TOrCs to understand the removal mechanism through sorption and biodegradation. Sorption was the dominant mechanism to remove EE2, SA and NP in secondary treatment processes. In nitrification and denitrification processes, higher percentage of TOrCs removal through biodegradation were observed compared to removal through sorption.     

Removal of pharmaceuticals and fragrances in biological wastewater treatment

The removal of seven pharmaceuticals and two fragrances in the biological units of various full-scale municipal wastewater treatment plants was studied. The observed removal of pharmaceuticals was mainly due to biological transformation and varied from insignificant (<10%, carbamazepine) to>90% (ibuprofen). However, no quantitative relationship between structure and activity can be set up for the biological transformation. Overall, it can be concluded that for compounds showing a sorption coefficient (K(d)) of below 300 L kg(-1), sorption onto secondary sludge is not relevant and their transformation can consequently be assessed simply by comparing influent and effluent concentrations. The two fragrances (HHCB, AHTN) studied were mainly removed by sorption onto sludge. For the compounds studied, comparable transformation and sorption was seen for different reactor types (conventional activated sludge, membrane bioreactor and fixed bed reactor) as well as for sludge ages between 10 and 60-80 days and temperatures between 12 degrees C and 21 degrees C. However, some significant variations in the observed removal currently lack an explanation. The observed incoming daily load of iopromide and roxithromycin in medium-sized municipal wastewater treatment plants (up to 80,000 population equivalents) is generated by only a small number of patients: the consequences for representative 24h composite sampling are discussed. Generally, the paper presents a method for setting up mass balances for micropollutants over entire wastewater treatment plants, including an estimation of the accuracy of the quantified fate (i.e. removal by sorption and biological transformation).     

Critical assessment of extracellular polymeric substances extraction methods from mixed culture biomass

Extracellular polymeric substances (EPS) have a presumed determinant role in the structure, architecture, strength, filterability, and settling behaviour of microbial solids in biological wastewater treatment processes. Consequently, numerous EPS extraction protocols have recently been published that aim to optimize the trade off between high EPS recovery and low cell lysis. Despite extensive efforts, the obtained results are often contradictory, even when analysing similar biomass samples and using similar experimental conditions, which greatly complicates the selection of an extraction protocol. This study presents a rigorous and critical assessment of existing physical and chemical EPS extraction methods applied to mixed-culture biomass samples (nitrifying, nitritation-anammox, and activated sludge biomass). A novel fluorescence-based method was developed and calibrated to quantify the lysis potential of different EPS extraction protocols. We concluded that commonly used methods to assess cell lysis (DNA concentrations or G6PDH activities in EPS extracts) do not correlate with cell viability. Furthermore, we discovered that the presence of certain chemicals in EPS extracts results in severe underestimation of protein and carbohydrate concentrations by using standard analytical methods. Keeping both maximum EPS extraction yields and minimal biomass lysis as criteria, it was identified a sonication-based extraction method as the best to determine and compare tightly-bound EPS fractions in different biomass samples. Protein was consistently the main EPS component in all analysed samples. However, EPS from nitrifying enrichments was richer in DNA, the activated sludge EPS had a higher content in humic acids and carbohydrates, and the nitritation-anammox EPS, while similar in composition to the nitrifier EPS, had a lower fraction of hydrophobic biopolymers. In general, the easily-extractable EPS fraction was more abundant in carbohydrates and humic substances, while DNA could only be found in tightly bound EPS fractions. In conclusion, the methodology presented herein supports the rational selection of analytical tools and EPS extraction protocols in further EPS characterization studies.     

Alumina nanoparticles-induced effects on wastewater nitrogen and phosphorus removal after short-term and long-term exposure

Alumina nanoparticles (Al₂O₃ NPs) have been widely used in many fields, which causes a growing concern about their potential health and environmental risks. However, their possible impacts on wastewater nitrogen and phosphorus removal have not yet been reported. In this study, both short-term and long-term effects of Al₂O₃ NPs on wastewater nutrient removal were investigated. Scanning electron microscope (SEM) analysis showed that most of Al₂O₃ NPs were adsorbed onto activated sludge, but these NPs had no adverse effects on the surface integrity and viability of activated sludge. It was found that short-term exposure to 1 and 50 mg/L Al₂O₃ NPs induced marginal influences on wastewater nitrification, denitrification and phosphorus removal. Nevertheless, the prolonged exposure to 50 mg/L Al₂O₃ NPs was observed to decrease the total nitrogen (TN) removal efficiency from 80.4% to 62.5% due to the suppressed denitrification process, although biological phosphorus removal and the transformations of intracellular polyhydroxyalkanoates and glycogen were not affected. Quantitative PCR assays indicated that compared with the control, 50 mg/L Al₂O₃ NPs decreased the abundance of denitrifying bacteria in activated sludge. Further enzyme activity tests showed that the activities of key denitrifying enzymes (nitrate reductase and nitrite reductase) were inhibited, which might be responsible for the negative effects of 50 mg/L Al₂O₃ NPs on wastewater nitrogen removal after long-term exposure.     

Roles of extracellular polymeric substances (EPS) in the migration and removal of sulfamethazine in activated sludge system

The occurrences, transformation of antibiotics in biological wastewater treatment plants have attracted increasing interests. However, roles of extracellular polymeric substances (EPS) of activated sludge on the fate of antibiotics are not clear. In this study, the roles of EPS in the migration and removal of one typical antibiotic, sulfamethazine (SMZ), in activated sludge process were investigated. The interaction between EPS and SMZ was explored through a combined use of fluorescence spectral analysis, laser light scattering and microcalorimetry techniques. Results show that SMZ interacted with the proteins in EPS mainly with a binding constant of 1.91 × 10⁵ L/mol. The binding process proceeded spontaneously, and the driving force was mainly from the hydrophobic interaction. After binding, the structure of EPS was expanded and became loose, which favored the mass transfer and pollution capture. The removal of SMZ was influenced by interaction with EPS. SMZ could be effectively adsorbed on EPS, which accounted for up to 61.8% of total SMZ adsorbed by sludge at the initial adsorption stage and declined to around 35.3% at the subsequent biodegradation stage. The enrichment of SMZ by EPS was beneficial for SMZ removal and acquisition by microbes at the subsequent biodegradation stage.     

Fate of antibiotics in activated sludge followed by ultrafiltration (CAS-UF) and in a membrane bioreactor (MBR)

The fates of several macrolide, sulphonamide, and trimethoprim antibiotics contained in the raw sewage of the Tel-Aviv wastewater treatment plant (WWTP) were investigated after the sewage was treated using either a full-scale conventional activated sludge (CAS) system coupled with a subsequent ultrafiltration (UF) step or a pilot membrane bioreactor (MBR) system. Antibiotics removal in the MBR system, once it achieved stable operation, was 15-42% higher than that of the CAS system. This advantage was reduced to a maximum of 20% when a UF was added to the CAS. It was hypothesized that the contribution of membrane separation (in both systems) to antibiotics removal was due either to sorption to biomass (rather than improvement in biodegradation) or to enmeshment in the membrane biofilm (since UF membrane pores are significantly larger than the contaminant molecules). Batch experiments with MBR biomass showed a markedly high potential for sorption of the tested antibiotics onto the biomass. Moreover, methanol extraction of MBR biomass released significant amounts of sorbed antibiotics. This finding implies that more attention must be devoted to the management of excess sludge.     

Nickel sorption by acclimatized activated sludge culture

The sorption of Ni(2+) by acclimatized activated sludge treating Ni(2+) bearing wastewater was investigated using a once-through completely mixed tank reactor. The culture developed from sewage was acclimatized to 85.2 microM/l Ni(2+) influent concentration by stepwise increases, at a low dilution rate 0.11/h. Acclimation was found to enhance the sorptive capacity of the activated sludge. In fact, at all of the intermediate concentrations, percentage Ni(2+) adsorbed by the biomass and also the sorptive capacity of the activated sludge drastically increased with an increase in the influent Ni(2+) concentration. All influent Ni(2+) concentrations were found to significantly stimulate the observed biomass yield of the culture over that observed in the base line. Experimental findings obtained at two other dilution rates; namely, 0.25/h and 0.45/h revealed that dilution rate is a significant operational parameter affecting the Ni(2+) sorption characteristics of acclimatized activated sludge microorganisms. Considerable complexation of nickel and organic and inorganic ligands in the wastewater appeared to be responsible for a relatively lower Ni(2+) sorption capacity.     

Fate and removal of selected endocrine‐disrupting compounds in sewage using activated sludge treatment

The variation and fate of four endocrine‐disrupting compounds (EDCs) composed of 4‐n‐nonylphenol (4‐n‐NP), bisphenol A (BPA), 17β‐estradiol (E2) and 17α‐ethinylestradiol (EE2) were investigated along treatment units in a sewage treatment plant (STP), China with anaerobic, anoxic and aerobic activated sludge processes. The mean concentrations were 64.8 ng/L (E2), 115.3 ng/L (4‐n‐NP), 171.5 ng/L (EE2), and 920.7 ng/L (BPA) in the influents, and 22.8 ng/L (E2), 50.9 ng/L (4‐n‐NP), 49.9 ng/L (EE2), and 84.3 ng/L (BPA) in the effluents. The biological treatment was more effective in removing NP, BPA and E2 from the aqueous phase than the primary treatment, while the latter could effectively remove EE2. Their possible removal mechanisms during the biological treatment with activated sludge were further explored through spiked batch experiments under three oxygen‐supplying conditions (anaerobic, anoxic and aerobic). The batch experiments showed that 4‐n‐NP, E2 and BPA were removed from the aqueous phase through biodegradation. The combination of sludge sorption and biodegradation accounted for the removal of EE2. Anoxic activated sludge showed the most rapid degradation of 4‐n‐NP, while E2 could be removed most effectively by aerobic activated sludge, and sludge sorption had a remarkable effect on its removal within the initial 15 min of the experiments under three oxygen‐supplying conditions.     

Biosorption of procaine on biologically active carbon

The article has studied the dynamics of biosorption purification of water of procaine adapted by biomass of active sludge immobilized on activated carbon. The greatest constant of the rate of biodestruction of procaine (0.151 h^–1) suspended by adapted biomass is observed at the concentration of the matter 100 mg/dm³. At biosorption removal of procaine on activated carbon under conditions of stirring the constants of the rates of biodestruction increase two–five times compared with suspended biomass. The adapted biofilm noticeably extend the service life of carbon compared with the spontaneously emerging biofilm at the sake of higher destruction activity.     

A simplified kinetic model to simulate soluble organic substances removal in an activated sludge aeration tank

A simple kinetic model for the removal of soluble organic substances, SOS, in the activated sludge aeration tank was proposed. The model consists of the instantaneous biosorption of SOS in the influent wastewater and the consecutive biooxidation of the remaining SOS in contact with the activated sludge under the aerated condition. By using samples taken from a municipal wastewater treatment plant, model parameters such as the amount of instantaneous biosorption and the rate of biooxidation, respectively, of SOS were empirically determined, and given as a function of soluble COD concentration. By combining the obtained kinetic data of SOS removal with the quantitative information of the liquid mixing characteristics in a multi-staged aeration tank, a mathematical model to simulate the distributions of SOS concentration in the aeration tank was presented. The simulation calculation was illustratively carried out and the results were shown in comparison with the experimental data in the same plant.     

Reuse of waste activated sludge for textile dyeing wastewater treatment by biosorption: performance optimization and comparison

The aim of this study is to assess the ability of local low‐cost biomaterials to remove reactive dyes from aqueous solutions. Granules prepared from dried activated sludge (DAS) were used as a sorbent for the removal of red bimacid dye (E5R) chosen as model dye. The study involves batch type experiments to investigate the effects of initial dye concentration, adsorbent dose, contact time, temperature and pH of solution on biosorption process. Optimal experimental conditions were ascertained. The pseudo‐second‐order kinetic model fits very well with the experimental results. The thermodynamic parameters for the biosorption process have also been calculated and found the sorption process as exothermic. The sorption performance of this DAS is finally compared with that of different reference sorbents and of other low‐cost materials.     

Bacterial response to a shock load of nanosilver in an activated sludge treatment system

The growing release of nanosilver into sewage systems has increased the concerns on the potential adverse impacts of silver nanoparticles (AgNPs) in wastewater treatment plants. The inhibitory effects of nanosilver on wastewater treatment and the response of activated sludge bacteria to the shock loading of AgNPs were evaluated in a Modified Ludzack-Ettinger (MLE) activated sludge treatment system. Before shock-loading experiments, batch extant respirometric assays determined that at 1 mg/L of total Ag, nitrification inhibitions by AgNPs (average size = 1-29 nm) and Ag⁺ ions were 41.4% and 13.5%, respectively, indicating that nanosilver was more toxic to nitrifying bacteria in activated sludge than silver ions. After a 12-h period of nanosilver shock loading to reach a final peak silver concentration of 0.75 mg/L in the MLE system, the total silver concentration in the mixed liquor decreased exponentially. A continuous flow-through model predicted that the silver in the activated sludge system would be washed out 25 days after the shock loading. Meanwhile, a prolonged period of nitrification inhibition (>1 month, the highest degree of inhibition = 46.5%) and increase of ammonia/nitrite concentration in wastewater effluent were observed. However, nanosilver exposure did not affect the growth of heterotrophs responsible for organic matter removal. Microbial community structure analysis indicated that the ammonium-oxidizing bacteria and nitrite-oxidizing bacteria, Nitrospira, had experienced population decrease while Nitrobacter was washed out after the shock loading.     

A comparative study of fouling-related properties of sludge from conventional and membrane enhanced biological phosphorus removal processes

The physical and biochemical properties of activated sludge mixed liquor, including floc size distribution, zeta potential, relative hydrophobicity, and bound and unbound (soluble) extracellular polymeric substances (EPS), were examined in this study to evaluate their relationship to membrane fouling. Mixed liquors from a membrane enhanced biological phosphorus removal (MEBPR) process and a conventional enhanced biological phosphorus removal (CEBPR) process were compared. It was found that the floc size distribution and the amount of soluble EPS in the mixed liquor were the most important properties that significantly influenced the fouling propensity of sludge. Contrary to the literature, the content of EPS bound in activated sludge flocs was not found to be directly associated with membrane fouling, and sludge surface properties such as zeta potential and relative hydrophobicity were not closely related to the observed differences in the fouling tendencies of the two types of sludge.     

Fine-scale bacterial community dynamics and the taxa-time relationship within a full-scale activated sludge bioreactor

In activated sludge bioreactors, aerobic heterotrophic communities efficiently remove organics, nutrients, toxic substances, and pathogens from wastewater, but the dynamics of these communities are as yet poorly understood. A macroecology metric used to quantify community shifts is the taxa-time relationship, a temporal analog of the species-area curve. To determine whether this metric can be applied to full-scale bioreactors, activated sludge samples were collected weekly over a one-year period at a local municipal wastewater treatment plant. Bacterial community dynamics were evaluated by monitoring 16S rRNA genes using Terminal Restriction Fragment Length Polymorphism (T-RFLP), corroborated by clone libraries. Observed taxa richness increased with time according to a power law model, as predicted by macroecological theory, with a power law exponent of w = 0.209. The results reveal strong long-term temporal dynamics during a period of stable performance (BOD removal and nitrification). Community dynamics followed a gradual succession away from initial conditions rather than periodicity around a mean “equilibrium”, with greater within-month then among-month community similarities. Changes in community structure were significantly associated via multivariate statistical analyses with dissolved oxygen, temperature, influent silver, biomass (MLSS), flow rate, and influent nitrite, cadmium and chromium concentrations. Overall, our results suggest patterns of bacterial community dynamics likely regulated in part by operational parameters and provide evidence that the taxa-time relationship may be a fundamental ecological pattern in macro- and microbial systems.     

The role of extracellular exopolymers in the removal of phosphorus from activated sludge

Biological phosphorus removal in activated sludge systems is thought to be a result of the action of polyphosphate accumulating organisms (PAO). However, not all phosphorus removed can be accounted for by PAO. A method for the qualitative in situ characterization of PAO cell clusters and closely associated extracellular exopolymers (EPS) is described. X-ray microanalysis was performed on samples from two activated sludge plants situated in Pretoria, South Africa. Analysis was done by means of scanning electron microscopy combined with energy dispersive spectrometry (EDS). Cell clusters with associated EPS, on average, contained between 57% and 59% phosphorus, while EPS alone contained, on average, between 27% and 30% phosphorus. Results suggest that phosphorus removal in activated sludge might be due not only to PAO, but also by EPS acting as a phosphorus reservoir.     

Membrane bioreactor operation at short solids retention times: performance and biomass characteristics

This study investigated the performance and biomass characteristics of a membrane bioreactor (MBR) and a completely mixed activated sludge (CMAS) system operated at short solids retention times (SRT) ranging from 0.25 to 5 d and hydraulic retention times of 3 and 6 h. The lab-scale reactors were fed with synthetic wastewater to ensure consistency in feed composition. Results show the MBR was capable of achieving excellent quality effluent regardless of the extremely short SRT. The MBR removal efficiencies ranged from approximately 97.3-98.4% (TCOD) in the MBR, compared to 77.5-93.8% (TCOD) and 94.1-97.0% (SCOD) in the CMAS. Nitrification completely ceased when SRT was < 2.5 d. The MBR biomass was composed of small, weak and uniform-sized flocs with large mass of short filamentous organisms and mainly dispersed microorganisms at SRT of 5 and 0.25 d, respectively. In contrast, the CMAS sludge was composed of large flocs with filamentous organisms as a backbone at SRT > 2.5 d. The CMAS flocs were smaller and weaker at shorter SRT. The MBR sludge contained a much higher fraction of non-flocculating microorganisms. This fraction increased significantly with decreasing SRT. It was found that the concentrations of protein and carbohydrates in the exocellular polymeric substances for both the MBR and the CMAS decreased with increasing F/M ratio or decreasing SRT. The combination of increasing amounts of non-flocculating microorganisms and a reduction of EPS at shorter SRT in both reactors contributed to deteriorating sludge settling properties. A significant presence of dispersed biomass and small flocs in MBR contributed to better reactor performance probably due to less mass transfer resistance.     

Phthalates,nonylphenols and LAS in an alternately operated wastewater treatment plant--fate modelling based on measured concentrations in wastewater and sludge

The performance of an alternately operated activated sludge wastewater treatment plant (WWTP) has been investigated with respect to six phthalates, nonylphenol (NP) and nonylphenol diethoxylate (NPDE) and linear alkylbenzene sulphonates (LAS). Samples of raw sewage, primary and secondary sludge and treated water were collected during an 8-day period in May 1999 and analysed for dissolved and sorbed substances. To evaluate the system performance with respect to substance removal through biodegradation and sorption to sludge the measured data were applied in a model describing the different bioreactors as one single reactor, corresponding to the concepts of, e.g. SimpleTreat. The most abundant of the investigated phthalates was di-(2-ethylhexyl)-phthalate (DEHP) with a measured mean inlet flow of 240g/day. Two percent of this amount was found in the treated water, 70% was biodegraded and 28% was found in the sludge. For LAS the mean inlet flow was 20,300g/day, of which less than 1% was found in the treated water, 84% was biodegraded and 15% was found in the sludge. The mean inlet flow of NP and NPDE was 44 and 590g/day, of which 4% and 2% was found in the treated water, 80% was biodegraded for both substances, and 16% and 18% was found in the sludge, respectively. The WWTP removal of the investigated substances was thus high compared to other studies of conventional activated sludge WWTPs. The simple model set-up presents a strong tool for predicting substance removal and system sensitivity related to changes in the inlet conditions, such as concentrations and flow. Furthermore, it allows the inclusion of complex alternately operated WWTPs in risk assessment tools such as e.g. SimpleTreat.     

Sorption and biodegradation of sulfonamide antibiotics by activated sludge: experimental assessment using batch data obtained under aerobic conditions

This study investigated the adsorption, desorption, and biodegradation characteristics of sulfonamide antibiotics in the presence of activated sludge with and without being subjected to NaN₃ biocide. Batch experiments were conducted and the relative contributions of adsorption and biodegradation to the observed removal of sulfonamide antibiotics were determined. Three sulfonamide antibiotics including sulfamethoxazole (SMX), sulfadimethoxine (SDM), and sulfamonomethoxine (SMM), which had been detected in the influent and the activated sludge of wastewater treatment plants (WWTP) in Taiwan, were selected for this study. Experimental results showed that the antibiotic compounds were removed via sorption and biodegradation by the activated sludge, though biodegradation was inhibited in the first 12 h possibly due to competitive inhibition of xenobiotic oxidation by readily biodegradable substances. The affinity of sulfonamides to sterilized sludge was in the order of SDM > SMM > SMX. The sulfonamides existed predominantly as anions at the study pH of 6.8, which resulted in a low level of adsorption to the activated sludge. The adsorption/desorption isotherms were of a linear form, as well described by the Freundlich isotherm with the n value approximating unity. The linear distribution coefficients (K_d) were determined from batch equilibrium experiments with values of 28.6 ± 1.9, 55.7 ± 2.2, and 110.0 ± 4.6 mL/g for SMX, SMM, and SDM, respectively. SMX, SMM, and SDM desorb reversibly from the activated sludge leaving behind on the solids 0.9%, 1.6%, and 5.2% of the original sorption dose of 100 μg/L. The sorbed antibiotics can be introduced into the environment if no further treatments were employed to remove them from the biomass.