Controllable Growth of Aligned Monocrystalline CsPbBr3 Microwire Arrays for Piezoelectric‐Induced Dynamic Modulation of Single‐Mode Lasing

CsPbBr₃ shows great potential in laser applications due to its superior optoelectronic characteristics. The growth of CsPbBr₃ wire arrays with well‐controlled sizes and locations is beneficial for cost‐effective and largely scalable integration into on‐chip devices. Besides, dynamic modulation of perovskite lasers is vital for practical applications. Here, monocrystalline CsPbBr₃ microwire (MW) arrays with tunable widths, lengths, and locations are successfully synthesized. These MWs could serve as high‐quality whispering‐gallery‐mode lasers with high quality factors (>1500), low thresholds (<3 µJ cm^?2), and long stability (>2 h). An increase of the width results in an increase of the laser quality and the resonant mode number. The dynamic modulation of lasing modes is achieved by a piezoelectric polarization‐induced refractive index change. Single‐mode lasing can be obtained by applying strain to CsPbBr₃ MWs with widths between 2.3 and 3.5 µm, and the mode positions can be modulated dynamically up to ≈9 nm by changing the applied strain. Piezoelectric‐induced dynamic modulation of single‐mode lasing is convenient and repeatable. This method opens new horizons in understanding and utilizing the piezoelectric properties of lead halide perovskites in lasing applications and shows potential in other applications, such as on‐chip strain sensing.     

Gravity Drawing of Micro‐ and Nanofibers for Additive Manufacturing of Well‐Organized 3D‐Nanostructured Scaffolds

This work introduces a gravity fiber drawing (GFD) method of making single filament nanofibers from polymer solutions and precise alignment of the fibers in 3D scaffolds. This method is advantageous for nanofiber 3D alignment in contrast to other known methods. GFD provides a technology for the fabrication of freestanding filament nanofibers of well‐controlled diameter, draw ratio, and 3D organization with controllable spacing and angular orientation between nanofibers. The GFD method is capable of fabricating complex 3D scaffolds combining fibers with different diameters, chemical compositions, mechanical properties, angular orientations, and multilayer structures in the same construct. The scaffold porosity can be as high as 99% to secure transport of nutrients and space for cell infiltration and differentiation in tissue engineering and 3D cell culture applications.     

Engineered Fibrillar Fibronectin Networks as Three‐Dimensional Tissue Scaffolds

Extracellular matrix (ECM) proteins, and most prominently, fibronectin (Fn), are routinely used in the form of adsorbed pre‐coatings in an attempt to create a cell‐supporting environment in both two‐ and three‐dimensional cell culture systems. However, these protein coatings are typically deposited in a form which is structurally and functionally distinct from the ECM‐constituting fibrillar protein networks naturally deposited by cells. Here, the cell‐free and scalable synthesis of freely suspended and mechanically robust three‐dimensional (3D) networks of fibrillar fibronectin (fFn) supported by tessellated polymer scaffolds is reported. Hydrodynamically induced Fn fibrillogenesis at the three‐phase contact line between air, an Fn solution, and a tessellated scaffold microstructure yields extended protein networks. Importantly, engineered fFn networks promote cell invasion and proliferation, enable in vitro expansion of primary cancer cells, and induce an epithelial‐to‐mesenchymal transition in cancer cells. Engineered fFn networks support the formation of multicellular cancer structures cells from plural effusions of cancer patients. With further work, engineered fFn networks can have a transformative impact on fundamental cell studies, precision medicine, pharmaceutical testing, and pre‐clinical diagnostics.     

Ionic Liquid‐Controlled Growth of NiCo2S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors

A significant development in the design of a NiCo₂S₄ 3D hierarchical hollow nanoarrow arrays (HNA)‐based supercapacitor binder free electrode assembled by 1D hollow nanoneedles and 2D nanosheets on a Ni foam collector through controlling ionic liquid 1‐octyl‐3‐methylimidazolium chloride ([OMIm]Cl) concentration is reported. The unique NiCo₂S₄‐HNA electrode acquires high specific capacity (1297 C g^?1 at 1 A g^?1, 2.59 C cm^?2 at 2 mA cm^?2), excellent rate capability (maintaining 73.0% at 20 A g^?1), and long operational life (maintaining 92.4% after 10 000 cycles at 5 A g^?1), which are superior to those for 1D hollow nanoneedle arrays (HNN) and 2D porous nanoflake arrays (PNF). The outstanding electrochemical performance is attributed to the novel 3D structure with large specific surface, hollow cores, high porosity as well as stable architecture. In addition, a hybrid supercapacitor applying 3D NiCo₂S₄‐HNA as the positive electrode and active carbon as the negative electrode exhibits a high energy density of 42.5 Wh kg^?1 at a power density of 2684.2 W kg^?1 in an operating voltage of 1.6 V. Robust cycling stability is also expressed with 84.9% retention after repeating 10 000 cycles at 5 A g^?1, implying their great potential in superior‐performance supercapacitors.     

Thyroid-Friendly Soft Materials as 3D Cell Culture Tool for Stimulating Thyroid Cell Function

The disruption of thyroid hormones because of chemical exposure is a significant societal problem. Chemical evaluations of environmental and human health risks are conventionally based on animal experiments. However, owing to recent breakthroughs in biotechnology, the potential toxicity of chemicals can now be evaluated using 3D cell cultures. In this study, the interactive effects of thyroid-friendly soft (TS) microspheres on thyroid cell aggregates are elucidated and their potential as a reliable toxicity assessment tool is evaluated. Using state-of-the-art characterization methods coupled with cell-based analysis and quadrupole time-of-flight mass spectrometry, it is shown that TS-microsphere-integrated thyroid cell aggregates exhibit improved thyroid function. Specifically, the responses of zebrafish embryos, which are used for thyroid toxicity analysis, and the TS-microsphere-integrated cell aggregates to methimazole (MMI), a known thyroid inhibitor, are compared. The results show that the thyroid hormone disruption response of the TS-microsphere-integrated thyroid cell aggregates to MMI is more sensitive compared with those of the zebrafish embryos and conventionally formed cell aggregates. This proof-of-concept approach can be used to control cellular function in the desired direction and hence evaluate thyroid function. Thus, the proposed TS-microsphere-integrated cell aggregates may yield new fundamental insights for advancing in vitro cell-based research.     

A TiN Nanorod Array 3D Hierarchical Composite Electrode for Ultrahigh‐Power‐Density Bromine‐Based Flow Batteries

Bromine‐based flow batteries are well suited for stationary energy storage due to attractive features of high energy density and low cost. However, the bromine‐based flow battery suffers from low power density and large materials consumption due to the relatively high polarization of the Br₂/Br^? couple on the electrodes. Herein, a self‐supporting 3D hierarchical composite electrode based on a TiN nanorod array is designed to improve the activity of the Br₂/Br^? couple and increase the power density of the bromine‐based flow battery. In this design, a carbon felt provides a composite electrode with a 3D electron conductive framework to guarantee high electronic conductivity, while the TiN nanorods possess excellent catalytic activity for the Br₂/Br^? electrochemical reaction to reduce the electrochemical polarization. Moreover, the 3D micro–nano hierarchical nanorod‐array alignment structure contributes to a high electrolyte penetration and a high ion‐transfer rate to reduce diffusion polarization. As a result, a zinc–bromine flow battery with the designed composite electrode can be operated at a current density of up to 160 mA cm^?2, which is the highest current density ever reported. These results exhibit a promising strategy to fabricate electrodes for ultrahigh‐power‐density bromine‐based flow batteries and accelerate the development of bromine‐based flow batteries.     

Near‐Infrared Light‐Sensitive Polyvinyl Alcohol Hydrogel Photoresist for Spatiotemporal Control of Cell‐Instructive 3D Microenvironments

Advanced hydrogel systems that allow precise control of cells and their 3D microenvironments are needed in tissue engineering, disease modeling, and drug screening. Multiphoton lithography (MPL) allows true 3D microfabrication of complex objects, but its biological application requires a cell‐compatible hydrogel resist that is sufficiently photosensitive, cell‐degradable, and permissive to support 3D cell growth. Here, an extremely photosensitive cell‐responsive hydrogel composed of peptide‐crosslinked polyvinyl alcohol (PVA) is designed to expand the biological applications of MPL. PVA hydrogels are formed rapidly by ultraviolet light within 1 min in the presence of cells, providing fully synthetic matrices that are instructive for cell‐matrix remodeling, multicellular morphogenesis, and protease‐mediated cell invasion. By focusing a multiphoton laser into a cell‐laden PVA hydrogel, cell‐instructive extracellular cues are site‐specifically attached to the PVA matrix. Cell invasion is thus precisely guided in 3D with micrometer‐scale spatial resolution. This robust hydrogel enables, for the first time, ultrafast MPL of cell‐responsive synthetic matrices at writing speeds up to 50 mm s^?1. This approach should enable facile photochemical construction and manipulation of 3D cellular microenvironments with unprecedented flexibility and precision.     

3D Heteroatom‐Doped Carbon Nanomaterials as Multifunctional Metal‐Free Catalysts for Integrated Energy Devices

Sustainable and cost‐effective energy generation has become crucial for fulfilling present energy requirements. For this purpose, the development of cheap, scalable, efficient, and reliable catalysts is essential. Carbon‐based heteroatom‐doped, 3D, and mesoporous electrodes are very promising as catalysts for electrochemical energy conversion and storage. Various carbon allotropes doped with a variety of heteroatoms can be utilized for cost‐effective mass production of electrode materials. 3D porous carbon electrodes provide multiple advantages, such as large surface area, maximized exposure to active sites, 3D conductive pathways for efficient electron transport, and porous channels to facilitate electrolyte diffusion. However, it is challenging to synthesize and functionalize isotropic 3D carbon structures. Here, various synthesis processes of 3D porous carbon materials are summarized to understand how their physical and chemical properties together with heteroatom doping dictate the electrochemical catalytic performance. Prospects of attractive 3D carbon structural materials for energy conversion and efficient integrated energy systems are also discussed.     

Centering Single Cells in Microgels via Delayed Crosslinking Supports Long‐Term 3D Culture by Preventing Cell Escape

Single‐cell‐laden microgels support physiological 3D culture conditions while enabling straightforward handling and high‐resolution readouts of individual cells. However, their widespread adoption for long‐term cultures is limited by cell escape. In this work, it is demonstrated that cell escape is predisposed to off‐center encapsulated cells. High‐speed microscopy reveals that cells are positioned at the microgel precursor droplets' oil/water interface within milliseconds after droplet formation. In conventional microencapsulation strategies, the droplets are typically gelled immediately after emulsification, which traps cells in this off‐center position. By delaying crosslinking, driving cells toward the centers of microgels is succeeded. The centering of cells in enzymatically crosslinked microgels prevents their escape during at least 28 d. It thereby uniquely enables the long‐term culture of individual cells within <5‐µm‐thick 3D uniform hydrogel coatings. Single cell analysis of mesenchymal stem cells in enzymatically crosslinked microgels reveals unprecedented high cell viability (>90%), maintained metabolic activity (>70%), and multilineage differentiation capacity (>60%) over a period of 28 d. The facile nature of this microfluidic cell‐centering method enables its straightforward integration into many microencapsulation strategies and significantly enhances control, reproducibility, and reliability of 3D single cell cultures.     

Engineering 2D Mesoporous Silica@MXene‐Integrated 3D‐Printing Scaffolds for Combinatory Osteosarcoma Therapy and NO‐Augmented Bone Regeneration

The rising concerns of the recurrence and bone deficiency in surgical treatment of malignant bone tumors have raised an urgent need of the advance of multifunctional therapeutic platforms for efficient tumor therapy and bone regeneration. Herein, the construction of a multifunctional biomaterial system is reported by the integration of 2D Nb₂C MXene wrapped with S‐nitrosothiol (R? SNO)‐grafted mesoporous silica with 3D‐printing bioactive glass (BG) scaffolds (MBS). The near infrared (NIR)‐triggered photonic hyperthermia of MXene in the NIR‐II biowindow and precisely controlled nitric oxide (NO) release are coordinated for multitarget ablation of bone tumors to enhance localized osteosarcoma treatment. The in situ formed phosphorus and calcium components degraded from BG scaffold promote bone‐regeneration bioactivity, augmented by sufficient blood supply triggered by on‐demand NO release. The tunable NO generation plays a crucial role in sequential adjuvant tumor ablation, combinatory promotion of coupled vascularization, and bone regeneration. This study demonstrates a combinatory osteosarcoma ablation and a full osseous regeneration as enabled by the implantation of MBS. The design of multifunctional scaffolds with the specific features of controllable NO release, highly efficient photothermal conversion, and stimulatory bone regeneration provides an intriguing biomaterial platform for the diversified treatment of bone tumors.