Reduced Graphene Oxide-Encapsulated Microfiber Patterns Enable Controllable Formation of Neuronal-Like Networks

Scaffold-guided formation of neuronal-like networks, especially under electrical stimulation, can be an appealing avenue toward functional restoration of injured nervous systems. Here, 3D conductive scaffolds are fabricated based on printed microfiber constructs using near-field electrostatic printing (NFEP) and graphene oxide (GO) coating. Various microfiber patterns are obtained from poly(l -lactic acid-co-caprolactone) (PLCL) using NFEP and complexity is achieved via modulating the fiber overlay angles (45°, 60°, 75°, 90°), fiber diameters (15 to 148 µm), and fiber spatial organization (spider web and tubular structure). Upon coating GO onto PLCL microfibers via a layer-by-layer (L-b-L) assembly technique and in situ reduction into reduced GO (rGO), the obtained conductive scaffolds, with 25–50 layers of rGO, demonstrate superior conductivity (≈0.95 S cm⁻¹) and capability of inducing neuronal-like network formation along the conductive microfibers under electrical stimulation (100–150 mV cm⁻¹). Both electric field (0–150 mV cm⁻¹) and microfiber diameter (17–150 µm) affect neurite outgrowth (PC-12 cells and primary mouse hippocampal neurons) and the formation of orientated neuronal-like networks. With further demonstration of such guidance to neuronal cells, these conductive scaffolds may see versatile applications in nerve regeneration and neural engineering.     

Influence of the Thermodynamic and Kinetic Control of Self‐Assembly on the Microstructure Evolution of Silk‐Elastin‐Like Recombinamer Hydrogels

Complex recombinant biomaterials that merge the self‐assembling properties of different (poly)peptides provide a powerful tool for the achievement of specific structures, such as hydrogel networks, by tuning the thermodynamics and kinetics of the system through a tailored molecular design. In this work, elastin‐like (EL) and silk‐like (SL) polypeptides are combined to obtain a silk‐elastin‐like recombinamer (SELR) with dual self‐assembly. First, EL domains force the molecule to undergo a phase transition above a precise temperature, which is driven by entropy and occurs very fast. Then, SL motifs interact through the slow formation of β‐sheets, stabilized by H‐bonds, creating an energy barrier that opposes phase separation. Both events lead to the development of a dynamic microstructure that evolves over time (until a pore size of 49.9 ± 12.7 µm) and to a delayed hydrogel formation (obtained after 2.6 h). Eventually, the network is arrested due to an increase in β‐sheet secondary structures (up to 71.8 ± 0.8%) within SL motifs. This gives a high bond strength that prevents the complete segregation of the SELR from water, which results in a fixed metastable microarchitecture. These porous hydrogels are preliminarily tested as biomimetic niches for the isolation of cells in 3D cultures.     

Aggregation‐Induced Electrochemiluminescence by Metal‐Binding Protein Responsive Hydrogel Scaffolds

Functionalized hydrogels have aroused general interest due to their versatile applications in biomaterial fields. This work reports a hydrogel network composed of gold nanoclusters linked with bivalent cations such as Ca²⁺, Mg²⁺, and Zn²⁺. The hydrogel exhibits both aggregation‐induced emission (AIE) and aggregation‐induced electrochemiluminescence (AIECL) effects. Most noteworthy, the AIECL effect (≈50‐fold enhancement) is even more significant than the corresponding AIE effect (approximately fivefold enhancement). Calmodulin, a Ca²⁺ binding protein, may efficiently regulate the AIECL dynamics after specific binding of the Ca²⁺ linker, with the linear range from 0.3 to 50 µg mL^?1 and a limit of detection of 0.1 µg mL^?1. Considering the important roles of bivalent cations in the life system, these results may pave a new avenue for the design of a biomolecule‐responsive AIECL‐type hydrogel with multifunctional biomedical purposes.     

Ultralight,Heat-Insulated,and Tough PVA Hydrogel Hybridized with SiO2@cellulose Nanoclaws Aerogel via the Synergy of Hydrophilic and Hydrophobic Interfacial Interactions

Lightweight porous hydrogels provide a worldwide scope for functional soft mateirals. However, most porous hydrogels have weak mechanical strength, high density (>1 g cm⁻³), and high heat absorption due to weak interfacial interactions and high solvent fill rates, which severely limit their application in wearable soft-electronic devices. Herein, an effective hybrid hydrogel-aerogel strategy to assemble ultralight, heat-insulated, and tough polyvinyl alcohol (PVA)/SiO₂@cellulose nanoclaws (CNCWs) hydrogels (PSCG) via strong interfacial interactions with hydrogen bonding and hydrophobic interaction is demonstrated. The resultant PSCG has an interesting hierarchical porous structure from bubble template (≈100 µm), PVA hydrogels networks introduced by ice crystals (≈10 µm), and hybrid SiO₂ aerogels (<50 nm), respectively. PSCG shows unprecedented low density (0.27 g cm⁻³), high tensile strength (1.6 MPa) & compressive strength (1.5 MPa), excellent heat-insulated ability, and strain-sensitive conductivity. This lightweight porous and tough hydrogel with an ingenious design provides a new way for wearable soft-electronic devices.     

Monolithic Flexible Vertical GaN Light‐Emitting Diodes for a Transparent Wireless Brain Optical Stimulator

Flexible inorganic‐based micro light‐emitting diodes (µLEDs) are emerging as a significant technology for flexible displays, which is an important area for bilateral visual communication in the upcoming Internet of Things era. Conventional flexible lateral µLEDs have been investigated by several researchers, but still have significant issues of power consumption, thermal stability, lifetime, and light‐extraction efficiency on plastics. Here, high‐performance flexible vertical GaN light‐emitting diodes (LEDs) are demonstrated by silver nanowire networks and monolithic fabrication. Transparent, ultrathin GaN LED arrays adhere to a human fingernail and stably glow without any mechanical deformation. Experimental studies provide outstanding characteristics of the flexible vertical μLEDs (f‐VLEDs) with high optical power (30 mW mm^?2), long lifetime (≈12 years), and good thermal/mechanical stability (100 000 bending/unbending cycles). The wireless light‐emitting system on the human skin is successfully realized by transferring the electrical power f‐VLED. Finally, the high‐density GaN f‐VLED arrays are inserted onto a living mouse cortex and operated without significant histological damage of brain.     

Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes

A highly porous 2D nanomaterial, holey graphene oxide (hGO), is synthesized directly from holey graphene powder and employed to create an aqueous 3D printable ink without the use of additives or binders. Stable dispersions of hydrophilic hGO sheets in water (≈100 mg mL^?1) can be readily achieved. The shear‐thinning behavior of the aqueous hGO ink enables extrusion‐based printing of fine filaments into complex 3D architectures, such as stacked mesh structures, on arbitrary substrates. The freestanding 3D printed hGO meshes exhibit trimodal porosity: nanoscale (4–25 nm through‐holes on hGO sheets), microscale (tens of micrometer‐sized pores introduced by lyophilization), and macroscale (<500 µm square pores of the mesh design), which are advantageous for high‐performance energy storage devices that rely on interfacial reactions to promote full active‐site utilization. To elucidate the benefit of (nano)porosity and structurally conscious designs, the additive‐free architectures are demonstrated as the first 3D printed lithium–oxygen (Li–O₂) cathodes and characterized alongside 3D printed GO‐based materials without nanoporosity as well as nanoporous 2D vacuum filtrated films. The results indicate the synergistic effect between 2D nanomaterials, hierarchical porosity, and overall structural design, as well as the promise of a freeform generation of high‐energy‐density battery systems.     

Rapid Production of Cell‐Laden Microspheres Using a Flexible Microfluidic Encapsulation Platform

This study establishes a novel microfluidic platform for rapid encapsulation of cells at high densities in photocrosslinkable microspherical hydrogels including poly(ethylene glycol)‐diacrylate, poly(ethylene glycol)‐fibrinogen, and gelatin methacrylate. Cell‐laden hydrogel microspheres are advantageous for many applications from drug screening to regenerative medicine. Employing microfluidic systems is considered the most efficient method for scale‐up production of uniform microspheres. However, existing platforms have been constrained by traditional microfabrication techniques for device fabrication, restricting microsphere diameter to below 200 µm and making iterative design changes time‐consuming and costly. Using a new molding technique, the microfluidic device employs a modified T‐junction design with readily adjustable channel sizes, enabling production of highly uniform microspheres with cell densities (10–60 million cells mL^?1) and a wide range of diameters (300–1100 µm), which are critical for realizing downstream applications, through rapid photocrosslinking (≈1 s per microsphere). Multiple cell types are encapsulated at rates of up to 1 million cells per min, are evenly distributed throughout the microspheres, and maintain high viability and appropriate cellular activities in long‐term culture. This microfluidic encapsulation platform is a valuable and readily adoptable tool for numerous applications, including supporting injectable cell therapy, bioreactor‐based cell expansion and differentiation, and high throughput tissue sphere‐based drug testing assays.     

Microfluidic Contact Lenses

Contact lens is a ubiquitous technology used for vision correction and cosmetics. Sensing in contact lenses has emerged as a potential platform for minimally invasive point‐of‐care diagnostics. Here, a microlithography method is developed to fabricate microconcavities and microchannels in a hydrogel‐based contact lens via a combination of laser patterning and embedded templating. Optical microlithography parameters influencing the formation of microconcavities including ablation power (4.3 W) and beam speed (50 mm s^?1) are optimized to control the microconcavity depth (100 µm) and diameter (1.5 mm). The fiber templating method allows the production of microchannels having a diameter range of 100–150 µm. Leak‐proof microchannel and microconcavity connections in contact lenses are validated through flow testing of artificial tear containing fluorescent microbeads (Ø = 1–2 µm). The microconcavities of contact lenses are functionalized with multiplexed fluorophores (2 µL) to demonstrate optical excitation and emission capability within the visible spectrum. The fabricated microfluidic contact lenses may have applications in ophthalmic monitoring of metabolic disorders at point‐of‐care settings and controlled drug release for therapeutics.     

Hierarchical Polymer Microlattice Structures

In this paper, we describe a rapid method for fabricating a low density polymer microlattice with structural organization on two length scales. The topology of this hierarchical cellular structure is achieved through the in situ formation of a microlattice with small‐scale lattice members (≈100 µm diameter) within a microlattice with approximately 12 times larger feature sizes. Compression experiments suggest that an increase in the specific plateau stress is realized by the introduction of hierarchy.     

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries

Poor cycling stability and safety concerns regarding lithium (Li) metal anodes are two major issues preventing the commercialization of high‐energy density Li metal‐based batteries. Herein, a novel tri‐layer separator design that significantly enhances the cycling stability and safety of Li metal‐based batteries is presented. A thin, thermally stable, flexible, and hydrophilic cellulose nanofiber layer, produced using a straightforward paper‐making process, is directly laminated on each side of a plasma‐treated polyethylene (PE) separator. The 2.5 µm thick, mesoporous (≈20 nm average pore size) cellulose nanofiber layer stabilizes the Li metal anodes by generating a uniform Li⁺ flux toward the electrode through its homogenous nanochannels, leading to improved cycling stability. As the tri‐layer separator maintains its dimensional stability even at 200 °C when the internal PE layer is melted and blocks the ion transport through the separator, the separator also provides an effective thermal shutdown function. The present nanocellulose‐based tri‐layer separator design thus significantly facilitates the realization of high‐energy density Li metal‐based batteries.     

Effect of graphene oxide nanosheets on the physico-mechanical properties of chitosan/bacterial cellulose nanofibrous composites

In this work, novel chitosan/bacterial cellulose (CS/BC) nanofibrous composites reinforced with graphene oxide (GO) nanosheets are introduced. As cell attachment and permeability of nanofibrous membranes highly depend on their fiber diameter, the working window for successful electrospinning to attain sound nanofibrous composites with a minimum fiber diameter was determined by using the response surface methodology. It is shown that the addition of GO nanosheets to CS/BC significantly reduces the average size of the polymeric fibers. Their mechanical properties are also influenced and can be tailored by the concentration of GO. Fourier transform infrared spectroscopy reveals hydrogen bonding between the GO nanosheets and the polymer matrix. A decrease in the hydrophilicity of the electrospun nanofibers and their water vapor permeability with the addition of GO are also reported. The prepared nanofibrous composites are potentially suitable candidates for biomedical applications such as skin tissue engineering and wound dressing.     

Three-dimensionally-patterned submicrometer-scale hydrogel/air networks that offer a new platform for biomedical applications

Phase mask interference lithography was employed to fabricate three-dimensional (3D) hydrogel structures with high surface area on neural prosthetic devices. A random terpolymer of poly(hydroxyethyl methacrylate- ran-methyl methacrylate- ran-methacrylic acid) was synthesized and used as a negative-tone photoresist to generate bicontinuous 3D hydrogel structures at the submicrometer scale. We demonstrated that the fully open 3D hydrogel/air networks can be used as a pH-responsive polymeric drug-release system for the delivery of neurotrophins to enhance the performance of neural prosthetic devices. Additionally an open hydrogel structure will provide direct access of neuronal growth to the device for improved electrical coupling.     

A photolabile hydrogel for guided three-dimensional cell growth and migration

Tissue engineering aims to replace, repair or regenerate tissue/organ function, by delivering signalling molecules and cells on a three-dimensional (3D) biomaterials scaffold that supports cell infiltration and tissue organization. To control cell behaviour and ultimately induce structural and functional tissue formation on surfaces, planar substrates have been patterned with adhesion signals that mimic the spatial cues to guide cell attachment and function. The objective of this study is to create biochemical channels in 3D hydrogel matrices for guided axonal growth. An agarose hydrogel modified with a cysteine compound containing a sulphydryl protecting group provides a photolabile substrate that can be patterned with biochemical cues. In this transparent hydrogel we immobilized the adhesive fibronectin peptide fragment, glycine-arginine-glycine-aspartic acid-serine (GRGDS), in selected volumes of the matrix using a focused laser. We verified in vitro the guidance effects of GRGDS oligopeptide-modified channels on the 3D cell migration and neurite outgrowth. This method for immobilizing biomolecules in 3D matrices can generally be applied to any optically clear hydrogel, offering a solution to construct scaffolds with programmed spatial features for tissue engineering applications.     

Dimension‐Controllable Microtube Arrays by Dynamic Holographic Processing as 3D Yeast Culture Scaffolds for Asymmetrical Growth Regulation

Transparent microtubes can function as unique cell culture scaffolds, because the tubular 3D microenvironment they provide is very similar to the narrow space of capillaries in vivo. However, how to realize the fabrication of microtube‐arrays with variable cross‐section dynamically remains challenging. Here, a dynamic holographic processing method for producing high aspect ratio (≈20) microtubes with tunable outside diameter (6–16 µm) and inside diameter (1–10 µm) as yeast culture scaffolds is reported. A ring‐structure Bessel beam is modulated from a typical Gaussian‐distributed femtosecond laser beam by a spatial light modulator. By combining the axial scanning of the focused beam and the dynamic display of holograms, dimension‐controllable microtube arrays (straight, conical, and drum‐shape) are rapidly produced by two‐photon polymerization. The outside and inside diameters, tube heights, and spatial arrangements are readily tuned by loading different computer‐generated holograms and changing the processing parameters. The transparent microtube array as a nontrivial tool for capturing and culturing the budding yeasts reveals the significant effect of tube diameter on budding characteristics. In particular, the conical tube with the inside diameter varying from 5 to 10 µm has remarkable asymmetrical regulation on the growth trend of captured yeasts.     

Multilayer Stacked Low‐Temperature‐Reduced Graphene Oxide Films: Preparation,Characterization, and Application in Polymer Memory Devices

Highly reduced graphene oxide (rGO) films are fabricated by combining reduction with smeared hydrazine at low temperature (e.g., 100 °C) and the multilayer stacking technique. The prepared rGO film, which has a lower sheet resistance (≈160–500 Ω sq⁻¹) and higher conductivity (26 S cm⁻¹) as compared to other rGO films obtained by commonly used chemical reduction methods, is fully characterized. The effective reduction can be attributed to the large “effective reduction depth” in the GO films (1.46 µm) and the high C1s/O1s ratio (8.04). By using the above approach, rGO films with a tunable thickness and sheet resistance are achieved. The obtained rGO films are used as electrodes in polymer memory devices, in a configuration of rGO/poly(3‐hexylthiophene) (P3HT):phenyl‐C61‐butyric acid methyl ester (PCBM)/Al, which exhibit an excellent write‐once‐read‐many‐times effect and a high ON/OFF current ratio of 10⁶.     

Solvent‐Assisted Micromolding of Biohybrid Hydrogels to Maintain Human Hematopoietic Stem and Progenitor Cells Ex Vivo

Array‐format cell‐culture carriers providing tunable matrix cues are instrumental in current cell biology and bioengineering. A new solvent‐assisted demolding approach for the fabrication of microcavity arrays with very small feature sizes down to single‐cell level (3 µm) of very soft biohybrid glycosaminoglycan–poly(ethylene glycol) hydrogels (down to a shear modulus of 1 kPa) is reported. It is further shown that independent additional options of localized conjugation of adhesion ligand peptides, presentation of growth factors through complexation to gel‐based glycosaminoglycans, and secondary gel deposition for 3D cell embedding enable a versatile customization of the hydrogel microcavity arrays for cell culture studies. As a proof of concept, cell‐instructive hydrogel compartment arrays are used to analyze the response of human hematopoietic stem and progenitor cells to defined biomolecular and spatial cues.     

Fast Gelation of Ti3C2Tx MXene Initiated by Metal Ions

Gelation is an effective way to realize the self‐assembly of nanomaterials into different macrostructures, and in a typical use, the gelation of graphene oxide (GO) produces various graphene‐based carbon materials with different applications. However, the gelation of MXenes, another important type of 2D materials that have different surface chemistry from GO, is difficult to achieve. Here, the first gelation of MXenes in an aqueous dispersion that is initiated by divalent metal ions is reported, where the strong interaction between these ions and ? OH groups on the MXene surface plays a key role. Typically, Fe²⁺ ions are introduced in the MXene dispersion which destroys the electrostatic repulsion force between the MXene nanosheets in the dispersion and acts as linkers to bond the nanosheets together, forming a 3D MXene network. The obtained hydrogel effectively avoids the restacking of the MXene nanosheets and greatly improves their surface utilization, resulting in a high rate performance when used as a supercapacitor electrode (≈226 F g^?1 at 1 V s^?1). It is believed that the gelation of MXenes indicates a new way to build various tunable MXene‐based structures and develop different applications.     

Lignin‐Based Direct Ink Printed Structural Scaffolds

3D printing of lignocellulosic biomass (cellulose, hemicellulose, and lignin) has attracted increasing attention by using this abundant, sustainable, and ecofriendly material. While cellulose can be easily tailored into a highly viscous ink for 3D printing, after solvent evaporation, the final printed structures become highly porous, fragile, and easily fall apart in water due to its hydrophilic nature. Lignin, another crucial component of natural lignocellulose, has not yet been reported for ink printing due to its unfavorable rheological behavior. Herein, a low‐cost direct ink printing strategy is developed to fabricate lignin‐based 3D structures with lignin no further refined and a more compact microstructure as well as different functionalities compared with printed cellulose. By using a soft triblock copolymer as the crosslinking agent, the rheology of lignin‐based inks can be adjusted from soft to rigid, and even enables vertical printing which requires stiff and self‐supporting features. The lignin‐based inks contain less water (≈40 wt%) and exhibit a much denser, stiffer structure, resulting in a wet tensile strength of ≈30 MPa, compared to only ≈0.6 MPa for printed cellulose. In addition, the unique macromolecular structure of lignin also demonstrates significantly improved stability in water and under heat, as well as UV‐blocking performance.     

Biomass‐Derived Nitrogen‐Doped Carbon Nanofiber Network: A Facile Template for Decoration of Ultrathin Nickel‐Cobalt Layered Double Hydroxide Nanosheets as High‐Performance Asymmetric Supercapacitor Electrode

The development of biomass‐based energy storage devices is an emerging trend to reduce the ever‐increasing consumption of non‐renewable resources. Here, nitrogen‐doped carbonized bacterial cellulose (CBC‐N) nanofibers are obtained by one‐step carbonization of polyaniline coated bacterial cellulose (BC) nanofibers, which not only display excellent capacitive performance as the supercapacitor electrode, but also act as 3D bio‐template for further deposition of ultrathin nickel‐cobalt layered double hydroxide (Ni‐Co LDH) nanosheets. The as‐obtained CBC‐N@LDH composite electrodes exhibit significantly enhanced specific capacitance (1949.5 F g^?1 at a discharge current density of 1 A g^?1, based on active materials), high capacitance retention of 54.7% even at a high discharge current density of 10 A g^?1 and excellent cycling stability of 74.4% retention after 5000 cycles. Furthermore, asymmetric supercapacitors (ASCs) are constructed using CBC‐N@LDH composites as positive electrode materials and CBC‐N nanofibers as negative electrode materials. By virtue of the intrinsic pseudocapacitive characteristics of CBC‐N@LDH composites and 3D nitrogen‐doped carbon nanofiber networks, the developed ASC exhibits high energy density of 36.3 Wh kg^?1 at the power density of 800.2 W kg^?1. Therefore, this work presents a novel protocol for the large‐scale production of biomass‐derived high‐performance electrode materials in practical supercapacitor applications.     

A Highly Aligned Nanowire‐Based Strain Sensor for Ultrasensitive Monitoring of Subtle Human Motion

Achieving highly accurate responses to external stimuli during human motion is a considerable challenge for wearable devices. The present study leverages the intrinsically high surface‐to‐volume ratio as well as the mechanical robustness of nanostructures for obtaining highly‐sensitive detection of motion. To do so, highly‐aligned nanowires covering a large area were prepared by capillarity‐based mechanism. The nanowires exhibit a strain sensor with excellent gauge factor (≈35.8), capable of high responses to various subtle external stimuli (≤200 µm deformation). The wearable strain sensor exhibits also a rapid response rate (≈230 ms), mechanical stability (1000 cycles) and reproducibility, low hysteresis (<8.1%), and low power consumption (<35 µW). Moreover, it achieves a gauge factor almost five times that of microwire‐based sensors. The nanowire‐based strain sensor can be used to monitor and discriminate subtle movements of fingers, wrist, and throat swallowing accurately, enabling such movements to be integrated further into a miniaturized analyzer to create a wearable motion monitoring system for mobile healthcare.