Cobalt Iron Hydroxide as a Precious Metal‐Free Bifunctional Electrocatalyst for Efficient Overall Water Splitting

Highly efficient and stable electrocatalysts from inexpensive and earth‐abundant elements are emerging materials in the overall water splitting process. Herein, cobalt iron hydroxide nanosheets are directly deposited on nickel foam by a simple and rapid electrodeposition method. The cobalt iron hydroxide (CoFe/NF) nanosheets not only allow good exposure of the highly active surface area but also facilitate the mass and charge transport capability. As an anode, the CoFe/NF electrocatalyst displays excellent oxygen evolution reaction catalytic activity with an overpotential of 220 mV at a current density of 10 mA cm^?2. As a cathode, it exhibits good performance in the hydrogen evolution reaction with an overpotential of 110 mV, reaching a current density of 10 mA cm^?2. When CoFe/NF electrodes are used as the anode and the cathode for water splitting, a low cell voltage of 1.64 V at 10 mA cm^?2 and excellent stability for 50 h are observed. The present work demonstrates a possible pathway to develop a highly active and durable substitute for noble metal electrocatalysts for overall water splitting.     

FeS2/CoS2 Interface Nanosheets as Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Electrochemical water splitting to produce hydrogen and oxygen, as an important reaction for renewable energy storage, needs highly efficient and stable catalysts. Herein, FeS₂/CoS₂ interface nanosheets (NSs) as efficient bifunctional electrocatalysts for overall water splitting are reported. The thickness and interface disordered structure with rich defects of FeS₂/CoS₂ NSs are confirmed by atomic force microscopy and high‐resolution transmission electron microscopy. Furthermore, extended X‐ray absorption fine structure spectroscopy clarifies that FeS₂/CoS₂ NSs with sulfur vacancies, which can further increase electrocatalytic performance. Benefiting from the interface nanosheets' structure with abundant defects, the FeS₂/CoS₂ NSs show remarkable hydrogen evolution reaction (HER) performance with a low overpotential of 78.2 mV at 10 mA cm⁻² and a superior stability for 80 h in 1.0 m KOH, and an overpotential of 302 mV at 100 mA cm⁻² for the oxygen evolution reaction (OER). More importantly, the FeS₂/CoS₂ NSs display excellent performance for overall water splitting with a voltage of 1.47 V to achieve current density of 10 mA cm⁻² and maintain the activity for at least 21 h. The present work highlights the importance of engineering interface nanosheets with rich defects based on transition metal dichalcogenides for boosting the HER and OER performance.     

A Cost‐Efficient Bifunctional Ultrathin Nanosheets Array for Electrochemical Overall Water Splitting

The design of cost‐efficient earth‐abundant catalysts with superior performance for the electrochemical water splitting is highly desirable. Herein, a general strategy for fabricating superior bifunctional water splitting electrodes is reported, where cost‐efficient earth‐abundant ultrathin Ni‐based nanosheets arrays are directly grown on nickel foam (NF). The newly created Ni‐based nanosheets@NF exhibit unique features of ultrathin building block, 3D hierarchical structure, and alloy effect with the optimized Ni₅Fe layered double hydroxide@NF (Ni₅Fe LDH@NF) exhibiting low overpotentials of 210 and 133 mV toward both oxygen evolution reaction and hydrogen evolution reaction at 10 mA cm^?2 in alkaline condition, respectively. More significantly, when applying as the bifunctional overall water splitting electrocatalyst, the Ni₅Fe LDH@NF shows an appealing potential of 1.59 V at 10 mA cm^?2 and also superior durability at the very high current density of 50 mA cm^?2.     

Heteroatom Doped Amorphous/Crystalline Ruthenium Oxide Nanocages as a Remarkable Bifunctional Electrocatalyst for Overall Water Splitting

Developing robust and highly active bifunctional electrocatalysts for overall water splitting is critical for efficient sustainable energy conversion. Herein, heteroatom-doped amorphous/crystalline ruthenium oxide-based hollow nanocages (M-ZnRuO_x (MCo, Ni, Fe)) through delicate control of composition and structure is reported. Among as-synthesized M-ZnRuO_x nanocages, Co-ZnRuO_x nanocages deliver an ultralow overpotential of 17 mV at 10 mA cm⁻² and a small Tafel slope of 21.61 mV dec⁻¹ for hydrogen evolution reaction (HER), surpassing the commercial Pt/C catalyst, which benefits from the synergistic coupling effect between electron regulation induced by Co doping and amorphous/crystalline heterophase structure. Moreover, the incorporation of Co prevents Ru from over-oxidation under oxygen evolution reaction (OER) operation, realizing the leap from a monofunctional to multifunctional electrocatalyst and then Co-ZnRuO_x nanocages exhibit remarkable OER catalytic activity as well as overall water splitting performance. Combining theory calculations with spectroscopy analysis reveal that Co is not only the optimal active site, increasing the number of exposed active sites while also boosting the long-term durability of catalyst by modulating the electronic structure of Ru atoms. This work opens a considerable avenue to design highly active and durable Ru-based electrocatalysts.     

An Efficient Cobalt Phosphide Electrocatalyst Derived from Cobalt Phosphonate Complex for All‐pH Hydrogen Evolution Reaction and Overall Water Splitting in Alkaline Solution

The development of low‐cost and highly efficient electrocatalysts via an eco‐friendly synthetic method is of great significance for future renewable energy storage and conversion systems. Herein, cobalt phosphides confined in porous P‐doped carbon materials (Co‐P@PC) are fabricated by calcinating the cobalt‐phosphonate complex formed between 1‐hydroxyethylidenediphosphonic acid and Co(NO₃)₂ in alkaline solution. The P‐containing ligand in the complex acts as the carbon source as well as in situ phosphorizing agent for the formation of cobalt phosphides and doping P element into carbon material upon calcination. The Co‐P@PC exhibits high activity for all‐pH hydrogen evolution reaction (overpotentials of 72, 85, and 76 mV in acidic, neutral, and alkaline solutions at the current density of 10 mA cm^?2) and oxygen evolution reaction in alkaline solution (an overpotential of 280 mV at the current density of 10 mA cm^?2). The alkaline electrolyzer assembled from the Co‐P@PC electrodes delivers the current density of 10 mA cm^?2 at the voltage of 1.60 V with a durability of 60 h. The excellent activity and long‐term stability of the Co‐P@PC derives from the synergistic effect between the active cobalt phosphides and the porous P‐doped carbon matrix.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.     

Bimetallic Phosphide Heterostructure Coupled with Ultrathin Carbon Layer Boosting Overall Alkaline Water and Seawater Splitting

Seawater electrolysis is promising for green hydrogen production but hindered by the sluggish reaction kinetics of both cathode and anode, as well as the detrimental chlorine chemistry environment. Herein, a self-supported bimetallic phosphide heterostructure electrode strongly coupled with an ultrathin carbon layer on Fe foam (C@CoP-FeP/FF) is constructed. When used as an electrode for the hydrogen and oxygen evolution reactions (HER/OER) in simulated seawater, the C@CoP-FeP/FF electrode shows overpotentials of 192 mV and 297 mV at 100 mA cm⁻², respectively. Moreover, the C@CoP-FeP/FF electrode enables the overall simulated seawater splitting at the cell voltage of 1.73 V to achieve 100 mA cm⁻², and operate stably during 100 h. The superior overall water and seawater splitting properties can be ascribed to the integrated architecture of CoP-FeP heterostructure, strongly coupled carbon protective layer, and self-supported porous current collector. The unique composites can not only provide enriched active sites, ensure prominent intrinsic activity, but also accelerate the electron transfer and mass diffusion. This work confirms the feasibility of an integration strategy for the manufacturing of a promising bifunctional electrode for water and seawater splitting.     

High‐Yield Electrochemical Production of Large‐Sized and Thinly Layered NiPS3 Flakes for Overall Water Splitting

Achieving large‐sized and thinly layered 2D metal phosphorus trichalcogenides with high quality and yield has been an urgent quest due to extraordinary physical/chemical characteristics for multiple applications. Nevertheless, current preparation methodologies suffer from uncontrolled thicknesses, uneven morphologies and area distributions, long processing times, and inferior quality. Here, a sonication‐free and fast (in minutes) electrochemical cathodic exfoliation approach is reported that can prepare large‐sized (typically ≈150 µm²) and thinly layered (≈70% monolayer) NiPS₃ flakes with high crystallinity and pure phase structure with a yield ≈80%. During the electrochemical exfoliation process, the tetra‐n‐butylammonium salt with a large ionic diameter is decomposed into gaseous species after the intercalation and efficiently expands the tightly stratified bulk NiPS₃ crystals, as revealed by in situ and ex situ characterizations. Atomically thin NiPS₃ flakes can be obtained by slight manual shaking rather than sonication, which largely preserves in‐plane structural integrity with large size and minimum damage. The obtained high quality NiPS₃ offers a new and ideal model for overall water splitting due to its inherent fully exposed S and P atoms that are often the active sites for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Consequently, the bifunctional NiPS₃ exhibits outstanding performance for overall water splitting.     

Transition‐Metal‐Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water‐splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co‐RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm^?2 current density) in 0.1 m HClO₄ media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M‐RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition‐activity relationship. This permits new design principles for bifunctional electrocatalysts.     

Graphdiyne‐Supported NiCo2S4 Nanowires: A Highly Active and Stable 3D Bifunctional Electrode Material

The oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting are major energy and chemical conversion efforts. Progress in electrocatalytic reactions have shown that the future is limitless in many fields. However, it is urgent to develop efficient electrocatalysts. Here, the first graphdiyne‐supported efficient and bifunctional electrocatalyst is reported using 3D graphdiyne foam as scaffolds, and NiCo₂S₄ nanowires as building blocks (NiCo₂S₄ NW/GDF). NiCo₂S₄ NW/GDF exhibits outstanding catalytic activity and stability toward both OER and HER, as well as overall water splitting in alkaline media. Remarkably, it enables a high‐performance alkaline water electrolyzer with 10 and 20 mA cm^?2 at very low cell voltages of 1.53 and 1.56 V, respectively, and remarkable stability over 140 h of continuous electrolysis operation at 20 mA cm^?2. The results indicate that this catalyst has a bifunction that overcomes all reported bifunctional, nonprecious‐metal‐based ones.     

Self‐Supportive Mesoporous Ni/Co/Fe Phosphosulfide Nanorods Derived from Novel Hydrothermal Electrodeposition as a Highly Efficient Electrocatalyst for Overall Water Splitting

Low cost and highly efficient bifuctional catalysts for overall water electrolysis have drawn considerable interests over the past several decades. Here, rationally synthesized mesoporous nanorods of nickel–cobalt–iron–sulfur–phosphorus composites are tightly self‐supported on Ni foam as a high‐performance, low cost, and stable bifunctional electrocatalyst for water electrolysis. The targeted designing and rational fabrication give rise to the nanorod‐like morphology with large surface area and excellent conductivity. The NiCoFe‐PS nanorod/NF can reach 10 mA cm^?2 at a small overpotential of 195 mV with a Tafel slope of 40.3 mV dec^?1 for the oxygen evolution reaction and 97.8 mV with 51.8 mV dec^?1 for the hydrogen evolution reaction. Thus, this bifunctional catalyst shows low potentials of 1.52 and 1.76 V at 10 and 50 mA cm^?2 toward overall water splitting with excellent stability for over 200 h, which are superior to most non‐noble metal‐based bifunctional electrocatalysts recently. This work provides a new strategy to fabricate multiple metal‐P/S composites with the mesoporous nanorod‐like structure as bifunctional catalysts for overall water splitting.     

Nitrogen Engineering on 3D Dandelion‐Flower‐Like CoS2 for High‐Performance Overall Water Splitting

Searching for highly efficient and stable bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is highly desirable for the practical application of water electrolysis under alkaline electrolyte. Although electrocatalysts based on transition metal sulfides (TMSs) are widely studied as efficient (pre)catalysts toward OER under alkaline media, their HER performances are far less than the state‐of‐the‐art Pt catalyst. Herein, the synthesis of nitrogen doped 3D dandelion‐flower‐like CoS₂ architecture directly grown on Ni foam (N‐CoS₂/NF) is reported that possesses outstanding HER activity and durability, with an overpotential of 28 mV to obtain the current density of 10 mA cm^?2, exceeding almost all the documented TMS‐based electrocatalysts. Density functional theory calculations and experimental results reveal that the d‐band center of CoS₂ could be efficiently tailored by N doping, resulting in optimized adsorption free energies of hydrogen (ΔG_*H) and water , which can accelerate the HER process in alkaline electrolyte. Besides, the resulting N‐CoS₂/NF also displays excellent performance for OER, making it a high‐performance bifunctional electrocatalyst toward overall water splitting, with a cell voltage of 1.50 V to achieve 10 mA cm^?2.     

Defect‐Enriched Nitrogen Doped–Graphene Quantum Dots Engineered NiCo2S4 Nanoarray as High‐Efficiency Bifunctional Catalyst for Flexible Zn‐Air Battery

Flexible Zn‐air batteries have recently emerged as one of the key energy storage systems of wearable/portable electronic devices, drawing enormous attention due to the high theoretical energy density, flat working voltage, low cost, and excellent safety. However, the majority of the previously reported flexible Zn‐air batteries encounter problems such as sluggish oxygen reaction kinetics, inferior long‐term durability, and poor flexibility induced by the rigid nature of the air cathode, all of which severely hinder their practical applications. Herein, a defect‐enriched nitrogen doped–graphene quantum dots (N‐GQDs) engineered 3D NiCo₂S₄ nanoarray is developed by a facile chemical sulfuration and subsequent electrophoretic deposition process. The as‐fabricated N‐GQDs/NiCo₂S₄ nanoarray grown on carbon cloth as a flexible air cathode exhibits superior electrocatalytic activities toward both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), outstanding cycle stability (200 h at 20 mA cm^?2), and excellent mechanical flexibility (without observable decay under various bending angles). These impressive enhancements in electrocatalytic performance are mainly attributed to bifunctional active sites within the N‐GQDs/NiCo₂S₄ catalyst and synergistic coupling effects between N‐GQDs and NiCo₂S₄. Density functional theory analysis further reveals that stronger OOH* dissociation adsorption at the interface between N‐GQDs and NiCo₂S₄ lowers the overpotential of both ORR and OER.     

Anion‐Modulated HER and OER Activities of 3D Ni–V‐Based Interstitial Compound Heterojunctions for High‐Efficiency and Stable Overall Water Splitting

Overall water splitting driven by a low voltage is crucial for practical H₂ evolution, but it is challenging. Herein, anion‐modulation of 3D Ni–V‐based transition metal interstitial compound (TMIC) heterojunctions supported on nickel foam (Ni₃N‐VN/NF and Ni₂P‐VP₂/NF) as coupled hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalysts for efficient overall water splitting is demonstrated. The heterointerface in Ni₃N‐VN has a suitable H* absorption energy, being favorable for enhancing HER activity with onset overpotential (η_onset) of zero and Tafel slope of 37 mV dec^?1 in 1 m KOH (close to that of Pt/C/NF). For the OER, the synergy of Ni₂P‐VP₂ with oxide species can give enhanced activity with η_onset of 220 mV and Tafel slope of 49 mV dec^?1. The good activity is ascribed to heterointerface for activating the intermediates, good conductivity of TMICs for electron‐transfer, and porous structure facilitation of mass‐transport. Additionally, the minimal mutual influence of Ni₃N‐VN/NF and Ni₂P‐VP₂/NF allows easy coupling for efficient overall water splitting with a low driving voltage (≥1.43 V), a voltage of 1.51 V at 10 mA cm^?2, and remarkable durability for 100 h. It can be driven by a solar cell (1.5 V), indicating its potential to store intermittent energy.     

Cr‐Doped FeNi–P Nanoparticles Encapsulated into N‐Doped Carbon Nanotube as a Robust Bifunctional Catalyst for Efficient Overall Water Splitting

Exploring high‐efficiency, stable, and cost‐effective bifunctional electrocatalysts for overall water splitting is greatly desirable and challenging. Herein, a newly designed hybrid catalyst with Cr‐doped FeNi–P nanoparticles encapsulated into N‐doped carbon nanotubes (Cr‐doped FeNi–P/NCN) with unprecedented electrocatalytic activity is developed by a simple one‐step heating treatment. The as‐synthesized Cr‐doped FeNi–P/NCN with moderate Cr doping exhibits admirable oxygen evolution reaction and hydrogen evolution reaction activities with overpotentials of 240 and 190 mV to reach a current density of 10 mA cm^?2 in 1 m KOH solution. When used in overall water splitting as a bifunctional catalyst, it needs only 1.50 V to give a current density of 10 mA cm^?2, which is superior to its typically integrated Pt/C and RuO₂ counterparts (1.54 V @ 10 mA cm^?2). Density functional theory calculation confirms that Cr doping into a FeNi‐host can effectively alter the relative Gibbs adsorption energy and reduces the theoretical overpotential. Additionally, the synergetic effects between Cr‐doped FeNi–P nanoparticles and NCNs are regarded as significant contributors to accelerate charge transfer and promote electrocatalytic activity in hybrid catalysts.     

Cation‐Modulated HER and OER Activities of Hierarchical VOOH Hollow Architectures for High‐Efficiency and Stable Overall Water Splitting

Atom‐scale modulation of electronic regulation in nonprecious‐based electrocatalysts is promising for efficient catalytic activities. Here, hierarchically hollow VOOH nanostructures are rationally constructed by partial iron substitution and systematically investigated for electrocatalytic water splitting. Benefiting from the hierarchically stable scaffold configuration, highly electrochemically active surface area, the synergistic effect of the active metal atoms, and optimal adsorption energies, the 3% Fe (mole ratio) substituted electrocatalyst (VOOH‐3Fe) exhibits a low overpotential of 90 and 195 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, respectively, superior than the other samples with a different substituted ratio. To the best of current knowledge, 195 mV overpotential at 10 mA cm^?2 is the best value reported for V or Fe (oxy)hydroxide‐based OER catalysts. Moreover, the electrolytic cell employing the VOOH‐3Fe electrode as both the cathode and anode exhibits a cell voltage of 0.30 V at 10 mA cm^?2 with a remarkable stability over 60 h. This work heralds a new pathway to design efficient bifunctional catalysts toward overall water splitting.