Cobalt Covalent Doping in MoS2 to Induce Bifunctionality of Overall Water Splitting

The layer‐structured MoS₂ is a typical hydrogen evolution reaction (HER) electrocatalyst but it possesses poor activity for the oxygen evolution reaction (OER). In this work, a cobalt covalent doping approach capable of inducing HER and OER bifunctionality into MoS₂ for efficient overall water splitting is reported. The results demonstrate that covalently doping cobalt into MoS₂ can lead to dramatically enhanced HER activity while simultaneously inducing remarkable OER activity. The catalyst with optimal cobalt doping density can readily achieve HER and OER onset potentials of ?0.02 and 1.45 V (vs reversible hydrogen electrode (RHE)) in 1.0 m KOH. Importantly, it can deliver high current densities of 10, 100, and 200 mA cm^?2 at low HER and OER overpotentials of 48, 132, 165 mV and 260, 350, 390 mV, respectively. The reported catalyst activation approach can be adapted for bifunctionalization of other transition metal dichalcogenides.     

Cobalt Phosphide Coupled with Heteroatom‐Doped Nanocarbon Hybrid Electroctalysts for Efficient,Long‐Life Rechargeable Zinc–Air Batteries

Metal phosphides and heteroatom‐doped carbons have been regarded as promising candidates as bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, both have suffered from stability issues during repeated ORR and OER operations in zinc–air batteries (ZABs). Herein, this study reports a versatile cobalt‐based hybrid catalyst with a 1D structure by integrating the metal‐organic framework‐derived conversion approach and an in situ crosslinking method. Among them, the 1D hybrid catalyst composed of ultrasmall cobalt phosphide nanoparticles supported by nitrogen‐, sulfur‐, phosphorus‐doped carbon matrix shows remarkable bifunctional activity close to that of the benchmark precious‐metal catalysts along with an excellent durability in the full potential range covering both the OER and ORR. The overall overpotential of the rechargeable ZABs can be greatly reduced with this bifunctional hybrid catalyst as an air‐electrode, and the cycling stability outperforms the commercial Pt/C catalyst. It is revealed that the cobalt phosphide nanoparticles are in situ converted to cobalt oxide under the accelerated conditions during OER (and/or ORR) of the ZABs and reduces the anodic current applied to the carbon. This contributes to the stability of the carbon material and in maintaining the high initial catalytic properties of the hybrid catalyst.     

In Situ Coupling of CoP Polyhedrons and Carbon Nanotubes as Highly Efficient Hydrogen Evolution Reaction Electrocatalyst

Hydrogen evolution reaction (HER) from water electrolysis is an attractive technique developed in recent years for cost‐effective clean energy. Although considerable efforts have been paid to create efficient catalysts for HER, the development of an affordable HER catalyst with superior performance under mild conditions is still highly desired. In this work, metal–organic frameworks (MOFs)‐templated strategy is proposed for in situ coupling of cobalt phosphide (CoP) polyhedrons nanoparticles and carbon nanotubes (CNTs). Due to the synergistic catalytic effect between CoP polyhedrons and CNTs, the as‐prepared CoP–CNTs hybrids show excellent HER performance. The resultant CoP–CNTs demonstrate excellent HER activity in 0.5 m H₂SO₄ with Tafel slope of 52 mV dec^?1, small onset overpotential of ≈64 mV, and a low overpotential of ≈139 mV at 10 mA cm^?2. Additionally, the catalyst also manifests superior durability in acid media. Considering the structure diversity of MOFs, the strategy presented here can be extended for synthesizing other well‐defined metal phosphides–CNTs hybrids, which may be used in the fields of catalysis, energy conversion and storage.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

Colloidal Cobalt Phosphide Nanocrystals as Trifunctional Electrocatalysts for Overall Water Splitting Powered by a Zinc–Air Battery

Highly efficient and stable electrocatalysts, particularly those that are capable of multifunctionality in the same electrolyte, are in high demand for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). In this work, highly monodisperse CoP and Co₂P nanocrystals (NCs) are synthesized using a robust solution‐phase method. The highly exposed (211) crystal plane and abundant surface phosphide atoms make the CoP NCs efficient catalysts toward ORR and HER, while metal‐rich Co₂P NCs show higher OER performance owing to easier formation of plentiful Co₂P@COOH heterojunctions. Density functional theory calculation results indicate that the desorption of OH* from cobalt sites is the rate‐limiting step for both CoP and Co₂P in ORR and that the high content of phosphide can lower the reaction barrier. A water electrolyzer constructed with a CoP NC cathode and a Co₂P NC anode can achieve a current density of 10 mA cm^?2 at 1.56 V, comparable even to the noble metal‐based Pt/C and RuO₂/C pair. Furthermore, the CoP NCs are employed as an air cathode in a primary zinc–air battery, exhibiting a high power density of 62 mW cm^?2 and good stability.     

Construction of Defect‐Rich Ni‐Fe‐Doped K0.23MnO2 Cubic Nanoflowers via Etching Prussian Blue Analogue for Efficient Overall Water Splitting

Designing elaborate nanostructures and engineering defects have been promising approaches to fabricate cost‐efficient electrocatalysts toward overall water splitting. In this work, a controllable Prussian‐blue‐analogue‐sacrificed strategy followed by an annealing process to harvest defect‐rich Ni‐Fe‐doped K_0.23MnO₂ cubic nanoflowers (Ni‐Fe‐K_0.23MnO₂ CNFs‐300) as highly active bifunctional catalysts for oxygen and hydrogen evolution reactions (OER and HER) is reported. Benefiting from many merits, including unique morphology, abundant defects, and doping effect, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 shows the best electrocatalytic performances among currently reported Mn oxide‐based electrocatalysts. This catalyst affords low overpotentials of 270 (320) mV at 10 (100) mA cm^?2 for OER with a small Tafel slope of 42.3 mV dec^?1, while requiring overpotentials of 116 and 243 mV to attain 10 and 100 mA cm^?2 for HER respectively. Moreover, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 applied to overall water splitting exhibits a low cell voltage of 1.62 V at 10 mA cm^?2 and excellent durability, even superior to the Pt/C||IrO₂ cell at large current density. Density functional theory calculations further confirm that doping Ni and Fe into the crystal lattice of δ‐MnO₂ can not only reinforce the conductivity but also reduces the adsorption free‐energy barriers on the active sites during OER and HER.     

Transition‐Metal‐Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water‐splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co‐RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm^?2 current density) in 0.1 m HClO₄ media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M‐RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition‐activity relationship. This permits new design principles for bifunctional electrocatalysts.     

Polyaniline Derived N‐Doped Carbon‐Coated Cobalt Phosphide Nanoparticles Deposited on N‐Doped Graphene as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

The development of highly efficient and durable non‐noble metal electrocatalysts for the hydrogen evolution reaction (HER) is significant for clean and renewable energy research. This work reports the synthesis of N‐doped graphene nanosheets supported N‐doped carbon coated cobalt phosphide (CoP) nanoparticles via a pyrolysis and a subsequent phosphating process by using polyaniline. The obtained electrocatalyst exhibits excellent electrochemical activity for HER with a small overpotential of ?135 mV at 10 mA cm^?2 and a low Tafel slope of 59.3 mV dec^?1 in 0.5 m H₂SO₄. Additionally, the encapsulation of N‐doped carbon shell prevents CoP nanoparticles from corrosion, exhibiting good stability after 14 h operation. Moreover, the as‐prepared electrocatalyst also shows outstanding activity and stability in basic and neutral electrolytes.     

Fe2+‐Doped Layered Double (Ni,Fe) Hydroxides as Efficient Electrocatalysts for Water Splitting and Self‐Powered Electrochemical Systems

Developing nonprecious electrocatalysts with superior activity and durability for electrochemical water splitting is of great interest but challenging due to the large overpotential required above the thermodynamic standard potential of water splitting (1.23 V). Here, in situ growth of Fe²⁺‐doped layered double (Ni, Fe) hydroxide (NiFe(II,III)‐LDH) on nickel foam with well‐defined hexagonal morphology and high crystallinity by a redox reaction between Fe³⁺ and nickel foam under hydrothermal conditions is reported. Benefiting from tuning the local atomic structure by self‐doping Fe²⁺, the NiFe(II,III)‐LDH catalyst with higher amounts of Fe²⁺ exhibits high activity toward oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER) activity. Moreover, the optimized NiFe(II,III)‐LDH catalyst for OER (O‐NiFe(II,III)‐LDH) and catalyst for HER (H‐NiFe(II,III)‐LDH) show overpotentials of 140 and 113 mV, respectively, at a current density of 10 mA cm^?2 in 1 m KOH aqueous electrolyte. Using the catalysts for overall water splitting in two‐electrode configuration, a low overpotential of just 1.54 V is required at a benchmark current density of 10 mA cm^?2. Furthermore, it is demonstrated that electrolysis of the water device can be drived by a self‐powered system through integrating a triboelectric nanogenerator and battery, showing a promising way to realize self‐powered electrochemical systems.     

基于多相硫化镍铁的高效析氧电极材料（英文）

开发高效和低成本的析氧电极材料是工业电解水制氢技术发展道路上至关重要的技术难题.本文利用溶剂热方法将镍铁水滑石阵列转化为具有铁掺杂的多相硫化镍(NiS和Ni3S2)阵列,制备出一种具有高效析氧性能的电极材料.粗糙的纳米片表面有利于高活性位点的暴露.电化学分析表明其仅需要100 mV的过电位就可以达到10 mA cm^-2的电流密度,相对于镍铁水滑石阵列降低了130 mV.我们进一步通过密度泛函理论计算来揭示其活性提升机理,发现具有部分S氧化的Fe掺杂NiS可以极大地降低析氧反应中间体形成的阻力,从而加快催化反应进行,提高催化活性.另一方面,(Ni,Fe)S和(Ni,Fe)3S2与三维多孔泡沫镍结构有很好的结合作用,反应电子可以通过金属性的二硫化镍相进行高效传输,进一步加速析氧催化进程.     

Accelerated Hydrogen Evolution Kinetics on NiFe‐Layered Double Hydroxide Electrocatalysts by Tailoring Water Dissociation Active Sites

Owing to its earth abundance, low kinetic overpotential, and superior stability, NiFe‐layered double hydroxide (NiFe‐LDH) has emerged as a promising electrocatalyst for catalyzing water splitting, especially oxygen evolution reaction (OER), in alkaline solutions. Unfortunately, as a result of extremely sluggish water dissociation kinetics (Volmer step), hydrogen evolution reaction (HER) activity of the NiFe‐LDH is rather poor in alkaline environment. Here a novel strategy is demonstrated for substantially accelerating the hydrogen evolution kinetics of the NiFe‐LDH by partially substituting Fe atoms with Ru. In a 1 m KOH solution, the as‐synthesized Ru‐doped NiFe‐LDH nanosheets (NiFeRu‐LDH) exhibit excellent HER performance with an overpotential of 29 mV at 10 mA cm^?2, which is much lower than those of noble metal Pt/C and reported electrocatalysts. Both experimental and theoretical results reveal that the introduction of Ru atoms into NiFe‐LDH can efficiently reduce energy barrier of the Volmer step, eventually accelerating its HER kinetics. Benefitting from its outstanding HER activity and remained excellent OER activity, the NiFeRu‐LDH steadily drives an alkaline electrolyzer with a current density of 10 mA cm^?2 at a cell voltage of 1.52 V, which is much lower than the values for Pt/C–Ir/C couple and state‐of‐the‐art overall water‐splitting electrocatalysts.     

Recent Progress in Cobalt‐Based Heterogeneous Catalysts for Electrochemical Water Splitting

Water electrolysis is considered as the most promising technology for hydrogen production. Much research has been devoted to developing efficient electrocatalysts for hydrogen production via the hydrogen evolution reaction (HER) and oxygen production via the oxygen evolution reaction (OER). The optimum electrocatalysts can drive down the energy costs needed for water splitting via lowering the overpotential. A number of cobalt (Co)‐based materials have been developed over past years as non‐noble‐metal heterogeneous electrocatalysts for HER and OER. Recent progress in this field is summarized here, especially highlighting several important bifunctional catalysts. Various approaches to improve or optimize the electrocatalysts are introduced. Finally, the current existing challenges and the future working directions for enhancing the performance of Co‐implicated electrocatalysts are proposed.     

Trifunctional Self‐Supporting Cobalt‐Embedded Carbon Nanotube Films for ORR,OER, and HER Triggered by Solid Diffusion from Bulk Metal

The development of robust and efficient trifunctional catalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen reaction (HER) is central to regenerative metal–air batteries and overall water splitting. It is still a big challenge to achieve an efficient integration of three functions in one freestanding electrode. Herein, a facile and upscalable strategy is demonstrated, to construct cobalt nanoparticle‐encapsulated 3D conductive films (Co/CNFs), which were induced by in situ solid diffusion from bulk cobalt metal. Under high‐temperature, volatile cobalt species from bulk cobalt foil are trapped by the contacted nitrogen‐rich carbons, followed by catalytic growth of interconnected carbon tubes, forming the 3D structured film. This resulting film can be directly preformed as self‐supporting and binder‐free electrode, which simultaneously facilitates the ORR, OER, and HER with excellent activities and superior stability. Furthermore, such “all‐in‐one” film also exhibits remarkable performance for Zn–air batteries and overall water splitting, demonstrating its feasibility for practical applications.     

Facile synthesis of Co-CoO<Subscript>x</Subscript>/N-doped carbon nanotubes hybrids as efficient and bifunctional catalysts for hydrogen and oxygen evolution

Developing low-cost, efficient, and bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is an attractive yet challenging task. Herein, we report a novel, simple and one-pot method to fabricate ultrafinely dispersed Co-CoO_x nanoparticles encapsulated in a nitrogen doped carbon nanotubes (denoted as Co-CoO_x/CN) via an efficient thermal condensation of d-glucosamine hydrochloride, melamine and Co(NO₃)₂·H₂O. A well-designed Co-CoO_x based hybrid that possesses high activity and excellent durability for the OER and HER in alkaline solution has been fabricated. The catalyst displays good stability for 30,000 s and small Tafel slope of 82 mV per decade for OER and 110 mV per decade for HER. Detailed electrochemical and physical studies indicate that the high OER and HER activity of the hybrid catalyst arises from the strong interaction between Co-based NPs and N-doped carbon nanotubes, and especially the synergistic effect of Co and cobalt oxide.     

Hierarchically Porous W‐Doped CoP Nanoflake Arrays as Highly Efficient and Stable Electrocatalyst for pH‐Universal Hydrogen Evolution

It is still challenging to develop high‐efficiency and low‐cost non‐noble metal‐based electrocatalysts for hydrogen evolution reaction (HER) in pH‐universal electrolytes. Herein, hierarchically porous W‐doped CoP nanoflake arrays on carbon cloth (W‐CoP NAs/CC) are synthesized via facile liquid‐phase reactions and a subsequent phosphorization process. The W‐CoP NAs/CC hybrid can be directly employed as a binder‐free electrocatalyst and delivers superior HER performance in pH‐universal electrolytes. Especially, it delivers very low overpotentials of 89, 94, and 102 mV to reach a current density of 10 mA cm^–2 in acidic, alkaline, and neutral electrolytes, respectively. Furthermore, it shows a nearly 100% Faradaic efficiency as well as superior long‐term stability with no decreasing up to 36 h in pH‐universal electrolytes. The outstanding electrocatalytic performance of W‐CoP NAs/CC can be mainly attributed to the porous W‐doped nanoflake arrays, which not only afford rich exposed active sites, but also accelerate the access of electrolytes and the diffusion of H₂ bubbles, thus efficiently promoting the HER performance. This work provides a new horizon to rationally design and synthesize highly effective and stable non‐noble metal phosphide‐based pH‐universal electrocatalysts for HER.     

Molybdenum Carbide‐Decorated Metallic Cobalt@Nitrogen‐Doped Carbon Polyhedrons for Enhanced Electrocatalytic Hydrogen Evolution

Electrocatalytic hydrogen evolution reaction (HER) based on water splitting holds great promise for clean energy technologies, in which the key issue is exploring cost‐effective materials to replace noble metal catalysts. Here, a sequential chemical etching and pyrolysis strategy are developed to prepare molybdenum carbide‐decorated metallic cobalt@nitrogen‐doped porous carbon polyhedrons (denoted as Mo/Co@N–C) hybrids for enhanced electrocatalytic hydrogen evolution. The obtained metallic Co nanoparticles are coated by N‐doped carbon thin layers while the formed molybdenum carbide nanoparticles are well‐dispersed in the whole Co@N–C frames. Benefiting from the additionally implanted molybdenum carbide active sites, the HER performance of Mo/Co@N–C hybrids is significantly promoted compared with the single Co@N–C that is derived from the pristine ZIF‐67 both in alkaline and acidic media. As a result, the as‐synthesized Mo/Co@N–C hybrids exhibit superior HER electrocatalytic activity, and only very low overpotentials of 157 and 187 mV are needed at 10 mA cm^?2 in 1 m KOH and 0.5 m H₂SO₄, respectively, opening a door for rational design and fabrication of novel low‐cost electrocatalysts with hierarchical structures toward electrochemical energy storage and conversion.     

NiMoFe and NiMoFeP as Complementary Electrocatalysts for Efficient Overall Water Splitting and Their Application in PV‐Electrolysis with STH 12.3%

Complementary water splitting electrocatalysts used simultaneously in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can simplify water splitting systems. Herein, earth‐abundant NiMoFe (NMF) and phosphorized NiMoFeP (NMFP) are synthesized as complementary overall water splitting (OWS) catalysts. First, NMF is tested as both the HER and OER promoter, which exhibits low overpotentials of 68 (HER) and 337 mV (OER). A quaternary NMFP is then prepared by simple phosphorization of NMF, which shows a much lower OER overpotential of 286 mV. The enhanced OER activity is attributed to the unique surface/core structure of NMFP. The surface phosphate acts as a proton transport mediator and expedites the rate‐determining step. With the application of OER potential, the NMFP surface is composed of Ni(OH)₂ and FeOOH, active sites for OER, but the inner core consists of Ni, Mo, and Fe metals, serving as a conductive electron pathway. OWS with NMF‐NMFP requires an applied voltage of 1.452 V to generate 10 mA cm^?2, which is one of the lowest values among OWS results with transition‐metal‐based electrocatalysts. Furthermore, the catalysts are combined with tandem perovskite solar cells for photovoltaic (PV)‐electrolysis, producing a high solar‐to‐hydrogen (STH) conversion efficiency of 12.3%.     

Exceptional Performance of Hierarchical Ni–Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In this work, using earth‐abundant transition metals (i.e., nickel, iron, and copper), 3D hierarchical nanoarchitectures, consisting of ultrathin Ni–Fe layered‐double‐hydroxide (Ni–Fe LDH) nanosheets or porous Ni–Fe oxides (NiFeO_x) assembled to a metallic NiCu alloy, are delicately constructed. In alkaline solution, the as‐prepared Ni–Fe LDH@NiCu possesses outstanding OER activity, achieving a current density of 10 mA cm^?2 at an overpotential of 218 mV, which is smaller than that of RuO₂ catalyst (249 mV). In contrast, the resulting NiFeO_x@NiCu exhibits better HER activity, yielding a current density of 10 mA cm^?2 at an overpotential of 66 mV, which is slightly higher than that of Pt catalyst (53 mV) but superior to all other transition metal (hydr)oxide‐based electrocatalysts. The remarkable activity of the Ni–Fe LDH@NiCu and NiFeO_x@NiCu is further demonstrated by a 1.5 V solar‐panel‐powered electrolyzer, resulting in current densities of 10 and 50 mA cm^?2 at overpotentials of 293 and 506 mV, respectively. Such performance renders the as‐prepared materials as the best bifunctional electrocatalysts so far.     

Nitrogen Engineering on 3D Dandelion‐Flower‐Like CoS2 for High‐Performance Overall Water Splitting

Searching for highly efficient and stable bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is highly desirable for the practical application of water electrolysis under alkaline electrolyte. Although electrocatalysts based on transition metal sulfides (TMSs) are widely studied as efficient (pre)catalysts toward OER under alkaline media, their HER performances are far less than the state‐of‐the‐art Pt catalyst. Herein, the synthesis of nitrogen doped 3D dandelion‐flower‐like CoS₂ architecture directly grown on Ni foam (N‐CoS₂/NF) is reported that possesses outstanding HER activity and durability, with an overpotential of 28 mV to obtain the current density of 10 mA cm^?2, exceeding almost all the documented TMS‐based electrocatalysts. Density functional theory calculations and experimental results reveal that the d‐band center of CoS₂ could be efficiently tailored by N doping, resulting in optimized adsorption free energies of hydrogen (ΔG_*H) and water , which can accelerate the HER process in alkaline electrolyte. Besides, the resulting N‐CoS₂/NF also displays excellent performance for OER, making it a high‐performance bifunctional electrocatalyst toward overall water splitting, with a cell voltage of 1.50 V to achieve 10 mA cm^?2.     

An Efficient Cobalt Phosphide Electrocatalyst Derived from Cobalt Phosphonate Complex for All‐pH Hydrogen Evolution Reaction and Overall Water Splitting in Alkaline Solution

The development of low‐cost and highly efficient electrocatalysts via an eco‐friendly synthetic method is of great significance for future renewable energy storage and conversion systems. Herein, cobalt phosphides confined in porous P‐doped carbon materials (Co‐P@PC) are fabricated by calcinating the cobalt‐phosphonate complex formed between 1‐hydroxyethylidenediphosphonic acid and Co(NO₃)₂ in alkaline solution. The P‐containing ligand in the complex acts as the carbon source as well as in situ phosphorizing agent for the formation of cobalt phosphides and doping P element into carbon material upon calcination. The Co‐P@PC exhibits high activity for all‐pH hydrogen evolution reaction (overpotentials of 72, 85, and 76 mV in acidic, neutral, and alkaline solutions at the current density of 10 mA cm^?2) and oxygen evolution reaction in alkaline solution (an overpotential of 280 mV at the current density of 10 mA cm^?2). The alkaline electrolyzer assembled from the Co‐P@PC electrodes delivers the current density of 10 mA cm^?2 at the voltage of 1.60 V with a durability of 60 h. The excellent activity and long‐term stability of the Co‐P@PC derives from the synergistic effect between the active cobalt phosphides and the porous P‐doped carbon matrix.