Characteristics of permeation and separation for propanol isomers through poly(vinyl alcohol) membranes containing cyclodextrin

Poly(vinyl alcohol) membranes containing cyclodextrin (CD–PVA membrane) were prepared and characteristics of permeation and separation for propanol (PrOH) isomers through the CD–PVA membranes were investigated by pervaporation and evapomeation. Evapomeation was more effective for the separation of PrOH isomers through the CD–PVA membrane than was pervaporation. The CD–PVA membrane more preferentially permeated n-PrOH than i-PrOH from their mixtures. In particular, the mixture of 10 wt % n-PrOH concentration was concentrated to about 45 wt % through the CD–PVA membrane. Both permeability and selectivity for n-PrOH were improved with an increase of CD content in the membrane. The results were supported by the fact that the affinity of CD for n-PrOH was stronger than that for i-PrOH. The permeation mechanism of PrOH isomers through the CD–PVA membrane is discussed based on the solution–diffusion theory. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of polyacrylamide‐grafted sodium alginate copolymeric membranes and their use in pervaporation separation of water and tetrahydrofuran mixtures

Polyacrylamide‐grafted sodium alginate (PAAm‐g‐Na‐Alg) copolymeric membranes have been prepared, characterized, and used in the pervaporation separation of 10–80 mass % water‐containing tetrahydrofuran mixtures. Totally three membranes were prepared: (1) neat Na‐Alg with 10 mass % of polyethylene glycol (PEG) and 5 mass % of polyvinyl alcohol (PVA), (2) 46 % grafted PAAm‐g‐Na‐Alg membrane containing 10 mass % of PEG and 5 mass % of PVA, and (3) 93 % grafted PAAm‐g‐Na‐Alg membrane containing 10 mass % of PEG and 5 mass % of PVA. Using the transport data, important parameters like permeation flux, selectivity, pervaporation separation index, swelling index, and diffusion coefficient have been calculated at 30°C. Diffusion coefficients were also calculated from sorption gravimetric data of water–tetrahydrofuran mixtures using Fick's equation. Arrhenius activation parameters for the transport processes were calculated for 10 mass % of water in the feed mixture using flux and diffusion data obtained at 30, 35, and 40°C. The separation selectivity of the membranes ranged between 216 and 591. The highest permeation flux of 0.677 kg/m² h was observed for 93% grafted membrane at 80 mass % of water in the feed mixture. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 272–281, 2002     

Pervaporation performance and Transport phenomenon of PVA blend membranes for the separation of THF/water azeotropic mixtures

Summary Dense polymer membranes were made by mixing aqueous solutions of hydrophilic polymers poly(vinyl alcohol) (PVA) and polyethyleneimine (PEI) in different ratios for investigating the separation of Tetrahydrofuran (THF)/water azeotropic mixtures by pervaporation (PV). In order to gain a more detailed picture of the molecular transport phenomenon, we have performed sorption gravimetric experiments at 30 °C to compute diffusion, swelling, sorption and permeability coefficients of PVA/PEI membranes in the presence of THF and water. The membranes were found to have good potential for breaking the azeotrope of THF at 6% concentration of water. An increase in PVA content in the blend caused a reduction in the flux and an increase in selectivity. Among the blends tested in the study, the 5:1 PVA/PEI blend membrane showed the highest separation factor of 181.5, exhibited a flux of 1.28 kg/m²h for THF respectively at azeotropic feed composition.     

Pervaporation properties of polypyrrolidinone‐based membranes for EtOH/ETBE mixtures separation

The separation of ethanol/ethyl‐tertiobutylether mixtures by pervaporation was studied with new membranes prepared from N‐vinyl‐pyrrolidinone (NVP) and N‐[3‐(trimethylamoniopropyl)]methacrylamidemethylsulfate) (TMA). The pervaporation results showed that highly EtOH selective membranes could be obtained from PVP blends and from pyrrolidinone‐based crosslinked copolymers. The influences of the polymer blend composition and the role of the polymer microstructures on the membrane properties were investigated. Whatever the exact NVP/TMA composition used, the membranes strongly favored the pervaporation of ethanol. The ethanol selectivity was higher for the lower PVP/TMA ratio. On the one hand, these results were ascribed to the high pyrrolidinone residues content, which is responsible of the enhanced EtOH sorption affinity. The observed permeation selectivity was in agreement with the swelling data also recorded with the different polymers, showing higher affinity for ethanol with PVP‐enriched materials compared with TMA ones. This is a direct consequence of the Lewis base feature of pyrrolidinone sites towards EtOH molecules. On the other hand, the TMA residues improved the overall stability and selectivity of the membranes thanks to crosslinking reactions, which were induced by thermal treatment. A close comparison made between polymer blend and copolymer pervaporation results helped to clarify the TMA role of the membrane transport properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3622–3630, 2006     

Sorption/diffusion of aqueous mixtures of 1,4‐dioxane/tetrahydrofuran through blend membranes of poly(vinyl alcohol) and sodium alginate: Their compatibility and pervaporation separation studies

Blend membranes of poly(vinyl alcohol) (PVA) and sodium alginate (NaAlg) were prepared by solution casting and crosslinked with glutaraldehyde (GA). Polymer blend compatibility was studied in water by measuring solution viscosity at 30°C. From the viscosity data, interaction parameters were determined to find the blend compatibility. Thickness of the membranes ranged between 35 and 40 μm. Circular disc‐shaped samples were cut from the thin membranes to perform gravimetric sorption experiments in water + 1,4‐dioxane and water + tetrahydrofuran mixtures at 30°C. Diffusion coefficients were calculated using Fick's equation. Concentration profiles of liquids were computed by solving Fick's equation under suitable boundary conditions. Diffusion coefficients show a dependence on the composition of the blends as well as composition of binary mixtures. A correlation was attempted between concentration profiles and diffusion coefficients of the transporting liquids. Degree of swelling and sorption coefficients were calculated from the gravimetric sorption data. Sorption kinetics was studied using an empirical equation to understand the nature of sorption–diffusion anomalies. Membrane selectivity for water + 1,4‐dioxane and water + tetrahydrofuran mixtures were calculated from the pervaporation experiments. A correlation between sorption and membrane selectivity was attempted. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 178–188, 2005     

Tunable physicochemical properties of PVA nanocomposite membranes for enhanced pervaporation performance

This study reveals the effect of hydrophilic bentonite nanoclay on the pervaporation separation of azeotropic composition of water and 1,4‐dioxane. The permselectivity of the membrane increased with filler concentration and was selective toward water at minimum filler loading. The intrinsic properties such as membrane permeance and selectivity increased with the concentration of hydrophilic bentonite nanoclay and crosslinked poly(vinyl alcohol) (PVA) with 2 wt% nanoclay membranes showed intrinsic selectivity 443 (532% increment than that of pristine membranes) with water permeance 4,675 gas permeation unit which is significantly higher compared to earlier literature. X‐ray diffraction and Transmission electron microscopy showed the well exfoliated and distributed nanoclay structure in the crosslinked PVA matrix. Interaction of PVA with nanoclay and the hydrophilic character of the membranes were characterized by Fourier transform infrared spectra and contact angle analysis, respectively. Interestingly, in this work the membranes exhibited simultaneous increment in both permeation flux and selectivity with filler loading, rather than the usual inverse trend of flux and selectivity. A predictive model of pervaporation was used to explain the pervaporation behavior and it showed good agreement with experimental results for overall pervaporation performance, preferential sorption of water, and hydrophilic‐hydrophobic nature of the membranes. POLYM. ENG. SCI., 58:849–858, 2018. © 2017 Society of Plastics Engineers     

Pervaporation separation of aqueous organic mixtures through sulfated zirconia‐poly(vinyl alcohol) membrane

Sulfated zirconia‐poly(vinyl alcohol) membranes were prepared, and pervaporation performances for aqueous organic mixtures were investigated. These hydrophilic membranes were formed by crosslinking poly(vinyl alcohol) (PVA) with the solid acid of sulfated zirconia by an acid‐catalyzed reaction. The pervaporation performances were measured as a function of the content ratio of sulfated zirconia to PVA, which affected the degree of swelling for water and the crosslinking density of the membrane. The membrane selectivity in pervaporation of aqueous organic mixtures increased in order of acetic acid < ethanol < 2‐ethoxyethanol without sacrificing the permeation rate, depending on their feed compositions. The effects of feed temperature and concentration on the membrane performance were also significant. It was found that sulfated zirconia in the membrane preparation played an important role as a filler material as well as an effective crosslinking or insolubilization agent in improving and controlling the membrane performance, i.e., permeation rate and selectivity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1450–1455, 2001     

Polyacrylonitrile‐g‐poly(vinyl alcohol) membranes for the pervaporation separation of dimethyl formamide and water mixtures

Poly(vinyl alcohol) as well as its grafted copolymer membranes with polyacrylonitrile (PAN‐g‐PVA) were prepared and used to separate water and dimethyl formamide mixtures by the pervaporation technique. The three following membranes were prepared: (1) pure PVA; (2) 46% grafted PAN‐g‐PVA; and (3) 93% grafted PAN‐g‐PVA. Pervaporation separation experiments were carried out at 25°C for the feed mixture containing 10 to 90% water. By use of the transport data, permeation flux, separation selectivity, swelling index, and diffusion coefficients have been calculated. By increasing the grafting of the membrane, flux decreased, whereas separation selectivity increased slightly over that of pure PVA membrane. Arrhenius activation parameters for transport processes were calculated for 10 mass % water containing feed mixture by using flux and diffusion data obtained at 25, 35, and 45°C. Transport parameters were discussed in terms of sorption‐diffusion principles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4091–4097, 2004     

Permselectivities of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl diphenyl methane–based aromatic polyamide membranes for aqueous alcohol mixtures in pervaporation and evapomeation

The separation of aqueous alcohol mixtures was carried out by use of a series of novel aromatic polyamide membranes. The aromatic polyamides were prepared by the direct polycondensation of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl (DBAPB) with various aromatic diacids, such as terephthalic acid (TPAc), 5‐tert‐butylisophthalic acid (TBPAc), and 4,4′‐hexafluoroisopropylidenedibenzoic acid (FDAc). The pervaporation and evapomeation performance of these novel aromatic polyamide membranes for dehydrating aqueous alcohol solution were investigated. The solubility of ethanol in the aromatic polyamide membranes is higher than that of water, but the diffusivity of water through the membrane is higher than that of ethanol. The effect of diffusion selectivity on the membrane separation performances plays an important role in the evapomeation process. Compared with pervaporation, evapomeation effectively increases the permselectivity of water. Moreover, the effect of aromatic diacids on the polymer chain packing density, pervaporation, and evapomeation performance were investigated. It was found that the permeation rate could be increased by introduction of a bulky group into the polymer backbone. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2688–2697, 2003     

Sorption equilibria and diffusion coefficients of ethanol and water in the PVA membranes containing cyclodextrin

Effects of cyclodextrin (CD) on the pervaporation characteristics for water/ethanol through the PVA/CD membranes (PVA membranes containing β-CD oligomer) have been investigated in terms of sorption equilibria and diffusion coefficients based on the sorption–diffusion theory. The increase in water selectivity through the pervaporation by CD was due mainly to the changes in the diffusion coefficients by CD, which depended on the feed composition and the cross-linking time. The water selectivity through the sorption equilibria was not increased by the addition of CD, and the ethanol-sorption amount was increased by CD. These effects of CD were interpreted by the inclusion strength in the CD cavity and the cross-linking density of the PVA phase. © 1994 John Wiley & Sons, Inc.     

Pervaporation separation of styrene–ethylbenzene mixture using poly(hexamethylene sebacate)‐based polyurethane membranes

A series of poly(hexamethylene sebacate) (PHS), with molecular weight in a range of 890–2200, based polyurethanes (PU), were synthesized by solution polymerization with different kinds of isocyanate and chain extender and two kinds of polymerization methods. All the PHS‐based PU membranes exhibited selectivity towards styrene during the pervaporation of styrene–ethylbenzene mixtures, and the properties of sorption and pervaporation were related to the composition of the PU membranes. Membranes with a low hard‐segment content and by two‐stage polymerization method exhibited high permselectivity. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 753–761, 1999     

Polyamide–imide membranes with surface immobilized cyclodextrin for butanol isomer separation via pervaporation

A novel cyclodextrin (CD) derivative, m‐xylenediamine‐β‐cyclodextrin (m‐XDA‐β‐CD), has been synthesized and used to graft β‐CD on membrane surface for the pervaporation separation of butanol isomers. The reaction mechanisms for the m‐XDA‐β‐CD synthesis and the membrane surface grafting are confirmed by FTIR and TGA. The as‐fabricated novel CD‐grafted polyamide‐imide (PAI) membranes show homogeneous morphology and significant improved separation performance as compared to the unmodified PAI membranes and PAI/CD mixed matrix membranes made of physical blends. The effects of chemical modification time and dope concentration on the asymmetric membrane have been studied. The optimal separation performance can be found with the CD‐grafted PAI membrane cast from a 22 wt % dope concentration, which exhibits a total butanol flux of 15 g/m²/h and a separation factor of 2.03. This newly developed membrane with surface‐immobilized CD may open new perspective for the development of next‐generation high‐performance pervaporation membranes for liquid separations. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Sorption,diffusion, and pervaporation separation of water–acetic acid mixtures through the blend membranes of sodium alginate and guar gum‐grafted‐polyacrylamide

Nonporous homogeneous dense membranes were prepared from the blends of sodium alginate (Na–Alg) with guar gum‐grafted polyacrylamide (GG‐g‐PAAm) in the ratios of 3 : 1 and 1 : 1 and these were tested for the pervaporation separation of water–acetic acid mixtures at 30°C. Blend compatibility was studied in solution by measuring the viscosity and the speed of sound. Membranes were crosslinked by glutaraldehyde. The GG‐g‐PAAm polymer and the crosslinked blend membranes were characterized by Fourier transform infrared spectra. High separation selectivity was exhibited by the pure Na–Alg membrane for water–acetic acid (HAc) mixtures containing 20 mass % of water. The permeation flux increased with increasing mass percent of water in the feed as well as with an increase in the amount of GG‐g‐PAAm in the blend, but separation selectivity decreased. Sorption selectivity was higher for the Na–Alg membrane than for the blend membranes, but it decreased with increasing mass percent of GG‐g‐PAAm in the blends. Diffusion selectivity values vary systematically with the blend composition, but not with the amount of water in the feed. Diffusion coefficients of the water–HAc mixtures were calculated from Fick's equation using sorption data and compared with those calculated from flux values obtained in pervaporation experiments. The Arrhenius activation parameters were calculated for the 20 mass % of water in the feed using flux and diffusion data obtained at 30, 40, and 50°C. The diffusion and pervaporation results are explained in terms of solution–diffusion concepts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 259–272, 2002     

Dehydration of light oil by pervaporation using poly(vinyl alcohol)–poly(acrylic acid‐co‐maleic acid) membranes

A new blended membrane was prepared and tested by pervaporation of light oil, a mixture of five alcohols plus water. The blended membrane was synthesized by blending poly(vinyl alcohol) and poly(acrylic acid‐co‐maleic acid) sodium salt in the presence of sulfuric acid to dope the reaction. We tested several membranes in order to choose the adequate composition to have the best permselectivity. The PVA(60)–PAA‐co‐maleic acid(40) membrane was selected as it was found to be highly selective. Sorption experiments were performed using binary and ternary water–alcohol solutions. The influence of temperature and feed composition on the selectivity and flux in pervaporation was investigated for two different binary mixtures (water/ethanol, water/isobutanol) and one ternary system (water/ethanol/isobutanol). This membrane presents good permselective properties, high water flux, and good selectivity and can even be used for high‐water activities The performances of this new membrane were compared to those obtained with the PVA(90)–PAA(10) membrane synthesized recently: The fluxes observed for the water–ethanol separation were of the same order of magnitude but the selectivity was found to be much higher. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1709–1716, 2002     

Effect of membrane morphology in pervaporative separation of isopropyl alcohol–aromatic mixtures— a thermodynamic approach to membrane selection

Isopropyl alcohol (IPA)–benzene and IPA–toluene, which forms azeotropic mixtures, are commonly encountered in pharmaceutical industries. The present study deals with the use of pervaporation to separate these mixtures. For this purpose, several polymeric hydrophilic membranes with variation in solubility parameters such as regenerated cellulose or cellophane, poly(vinyl alcohol) (PVA), cellulose acetate (CA), cellulose diacetate (CDA), and cellulose triacetate (CTA) were studied. Some of these membranes gave a gradual shift of azeotropic point according to the variation of solubility parameter and interaction parameter values between solute and polymer matrix. Regenerated cellulose film gave the best pervaporation performance in terms of IPA selectivity and durability. PVA showed high selectivity with reasonable flux. Poly(dimethylsiloxane), which is hydrophobic, was also studied as an aromatic selective membrane. The experiments were carried out over the entire range of 0–100% at 30°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3912–3921, 2003     

Pervaporation of methanol/methyl tert‐butyl ether mixtures through agarose/hydroxyethylcellulose blended membranes

In this study, we investigated methanol (MeOH)/methyl tert‐butyl ether (MTBE) separation with hydroxyethylcellulose (HEC)/agarose blended membranes by applying a pervaporation technique. The membranes permeated MeOH in preference to MTBE from MeOH/MTBE mixtures. From pervaporation and sorption data, the permselectivity of HEC/agarose blended membrane was dominantly due to solubility selectivity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3408–3411, 2002     

Studies on the δ‐form complex in the syndiotactic polystyrene–organic molecule system. II. Structural investigation of the δ‐form with p‐ and m‐xylene isomers

Syndiotactic polystyrene (sPS) membranes containing different mole fractions of p‐xylene were prepared by a solution‐casting procedure. Complex formation between sPS and xylene was studied by thermogravimetric analysis and Fourier transform infrared spectroscopy. The stability and desorption behavior of the sPS–guest solvent and phase transitions were studied by differential scanning calorimetry. The formation of the δ‐form complex in the presence of different mole fractions of xylene isomers was analyzed and confirmed. The mole fraction of p‐xylene in the dried membrane was found to be higher than that of the corresponding mole fraction in the isomer solvent solution used for casting. This was attributed to the preferential complexing ability of p‐xylene with sPS. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2882–2887, 2003     

Preparation of PVA membranes containing β-cyclodextrin oligomer (PVA/CD membrane) and their pervaporation characteristics for ethanol/water mixtures

Poly(vinyl alcohol) (PVA) membranes were modified by introducing β-cyclodextrin (β-CD) oligomer, which has an inclusion ability sensitive to size, structure, and hydrophilicity of the guest molecule. The modified membranes (PVA/CD membrane) were prepared by casting of the aqueous solutions of PVA and β-CD oligomer. The CD oligomer was immobilized in the membranes by cross-linking with glutaraldehyde. The cross-linking times were 1 and 8 h. The content of CD in the membranes was 33 wt %. The effects of CD on the pervaporation characteristics for water/ethanol were investigated by comparisons with those of the cross-linked PVA membranes. For the 1 h cross-linked membranes, CD increased both the water permeation rate and selectivity at lower ethanol concentrations in the feed. At higher ethanol concentrations, CD increased the water selectivity, but it decreased the water permeation rate. For the 8 h cross-linked membranes, at lower ethanol concentrations, CD increased the water permeation rate, but the water selectivity through the PVA/CD membrane was almost equal to that of the PVA membrane. At higher ethanol concentrations, CD increased the water selectivity and decreased the water permeation rate. These effects of CD can be interpreted in terms of the inclusion strength in the cavity and the reduction of the cross-linking density of the PVA phase in the membranes. © 1994 John Wiley & Sons, Inc.     

Modified MCM‐41 silica spheres filled polydimethylsiloxane membrane for dimethylcarbonate/methanol separation via pervaporation

Inorganic–organic hybrid membrane materials always exhibit high pervaporation performance for organic azeotropic mixtures. Here, MCM‐41 silica spheres were modified and embedded into polydimethylsiloxane, and a new filled membrane was obtained. The membrane was used in dimethylcarbonate (DMC) removal from DMC/methanol azeotropic mixture by pervaporation. The effect of membrane preparation parameters including modified MCM‐41 silica spheres loading, solvent concentration, and feed temperature on pervaporation properties was systematically studied. The results showed that separation factor and total flux of the filled membranes could be increased simultaneously. Additionally, the sorption and diffusion selectivity of the filled membranes were measured and discussed. The results demonstrated that diffusion selectivity was greatly enhanced by incorporating. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Pervaporation membranes based on imide‐containing poly(amic acid) and poly(phenylene oxide)

Three imide‐containing poly(amic acids) were synthesized and used for homogeneous and composite membrane preparation. The transport properties of composite membranes consisting of an imide‐containing poly(amic acid) top layer on an asymmetric porous poly(phenylene oxide) support were studied in the pervaporation of aqueous solutions of organic liquids (ethanol, isopropanol, acetone, and ethylacetate) and organic/organic mixtures (ethylacetate/ethanol, methanol/cyclohexane). For most of the aqueous/organic mixtures, the composite membranes exhibited dehydration properties. Dilute aqueous solutions of ethylacetate were an exception. In these solutions, the composite membranes exhibited organophilic properties, high permeability, and selectivity with respect to ethylacetate. In the pervaporation of methanol/cyclohexane mixtures, methanol was removed with very high selectivity. To account for specific features of pervaporation on the composite membranes, the sorption and transport properties of homogeneous membranes prepared from polymers comprising the composite membrane [imide‐containing poly(amic acids) and poly(phenylene oxide)] were studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2361–2368, 2003