Multiband integrated wideband antenna for bluetooth/WLAN applications

The paper presents an O-shape multiband monopole antenna design (Antenna-I) with different patch orientations; 90-degree (Antenna-II) and 180-degree (Antenna-III). The proposed Antenna-I is a multiband integrated wideband monopole antenna with two integrated bands supporting modern wireless services such as Bluetooth and Wireless Local Area Network (WLAN) in addition to wideband covering upper Ultra-wideband (UWB) frequencies. The first band ranges from 2.05 to 3.05 GHz and second band from 3.65 to 3.92 GHz in the −10 dB impedance bandwidth range. The wideband covers upper frequencies (5.24–10.75 GHz) in the range of Ultra-wideband. Antenna-II resonates at 2.38 GHz (2.11–2.90 GHz) covering Bluetooth band and upper UWB region 5.18–10.86 GHz. The proposed Antenna-III covers 1.96–2.33 GHz and 3.74–10.46 GHz frequency bands. The antenna gain at integrated band is around 2.8 dBi and varies from 4 dBi to 8.03 dBi in the UWB region. The measured fidelity factor is 0.89 for face to face and 0.82 for side by side. Measured results are presented to validate the antenna performances.     

Performance of a Crossed Exponentially Tapered Slot Antenna for UWB Systems

A compact printed antenna is described that exhibits adequate transient performance for ultrawideband (UWB) applications and it is further adequate for polarization diversity schemes. The antenna is based on an original combination of two crossed exponentially tapered slots plus a star-shaped slot to produce a stable radiation pattern with very stable polarization over the 3.1–10.6 GHz FCC assigned band. Results are confirmed with measurements. Figures of merit like output pulse fidelity and time window containing 90% of the transmitted energy are analyzed over the entire solid angle and showed to remain quite stable, in line with envisaged UWB system requirements. Compact dual-antenna arrangements are also analyzed in view of potential use for UWB multiple-input–multiple-output implementations.      

A novel Ultra WideBand monopole antenna with band-notched characteristics

A simple and compact microstrip-fed Ultra WideBand(UWB) printed monopole antenna with band-notched characteristic is proposed in this paper.The antenna is composed of a square ring with a small strip bar,so that the antenna occupies about 7.69 GHz bandwidth covering 3.11～10.8 GHz with expected band rejection from 5.12 GHz to 5.87 GHz.A quasi-omnidirectional and quasi-sym-metrical radiation pattern is also obtained.This kind of band-notched UWB antenna requires no ex-ternal filters and thus greatly simplifie...     

Ultra-Wideband Compact Circularly Polarized Antenna

In this research work, a circularly polarized (CP) monopole antenna is designed for Ultra-Wideband (UWB) applications. The CP UWB antenna is be made up of a reformed ring patch and ground plane. The slots and stubs are inserted in the ground to achieve CP in the UWB antenna. This antenna attained an Axial Ratio Bandwidth (ARBW) of 5 GHz (4.0–9.0 GHz) that lies in the UWB frequency range that is from 3.1 to 10.6 GHz. The designed antenna has a radiation efficiency of around 80% for the complete UWB frequency range. The CP UWB antenna is designed and fabricated using the FR4 with a compact size of 32?×?30?×?1.6 mm³ and with a peak gain of 6.8 dBi. Tested results are in good resembles with simulated ones.

     

Compact Folded Monopole Antenna Excited by a Conductor‐Backed Coplanar Waveguide with Vias

A compact monopole antenna excited by a conductor‐backed coplanar waveguide (CBCPW) is developed for wireless USB dongle applications. The proposed antenna has a compact dimension of 14 mm × 47.4 mm × 3.5 mm, which is suitable for a USB dongle housing. A slotted elliptical patch and a CBCPW with vertical vias are employed to achieve a further size reduction and an improved impedance bandwidth. The measurement result demonstrates that the fabricated antenna resonates from 2.25 GHz to 10.9 GHz, which covers all of the important wireless communication bands, including WiBro (2.3 GHz to 2.4 GHz), Bluetooth (2.4 GHz to 2.484 GHz), WiMAX (2.5 GHz to 2.7 GHz and 3.4 GHz to 3.6 GHz), satellite DMB (2.605 GHz to 2.655 GHz), 802.11b/g/a WLAN (2.4 GHz to 2.485 GHz and 5.15 GHz to 5.825 GHz), and ultra‐wideband (3.1 GHz to 10.6 GHz) services. The radiation characteristics of the proposed antenna when attached to a laptop are tested to investigate the influence of the keypad and the LCD panel of the laptop.     

Novel Shorted Meander‐Line USB Dongle Antenna with a Compact Ground Plane

This letter presents the design of a novel multiband USB dongle antenna with a compact ground plane. The radiating patch is composed of a modified meander‐line monopole and a shorted loop to generate a dual‐broadband resonance. The proposed antenna supports WiBro, Bluetooth, WLAN, WiMAX, and S‐DMB services. The total dimensions of the fabricated antenna are 10 mm × 45 mm × 1 mm, the most compact size among multiband USB dongle antennas reported to date. The measured 10 dB reflection loss bandwidths are 20.8% (2.24 GHz to 2.76 GHz) and 20.2% (4.86 GHz to 5.95 GHz). The measured peak gain is 2.97 dBi, and efficiency is higher than 58%. In addition, the radiation pattern approximates an omnidirectional pattern.     

一种双阻带椭圆单极子UWB天线的设计

通过仿真与实际测试结合的方法,研究并设计了一种用于UWB通信的、具有双阻带特性的紧凑椭圆单极子天线。双阻带特性是通过在辐射单元上插入一个缝隙和在馈线上引入一共面波导谐振单元实现的。测试结果表明此天线在3.45~3.75 GHz(覆盖了WIMAX频段)和5~6 GHz(覆盖了5.15~5.85 GHz的WLAN频段)分别有两个阻带,此外,驻波系数在3.1~10.6 GHz UWB的范围内小于2。天线的辐射特性也近似于全向。天线的增益和传输函数也证实了天线能达到双阻带特性。     

A compact dual band-notched UWB circular monopole antenna with parasitic resonators

A compact dual band-notched Ultra-wideband (UWB) circular monopole antenna that has two parasitic resonators in the ground plane is presented in this paper. The Inverted–U and Iron shaped parasitic resonators are located on the back side of the radiating patch to achieve the band rejection characteristics from 5 to 5.4 GHz for WLAN and 7.8 to 8.4 GHz for ITU band respectively. By cutting a rectangular slot on the ground plane, additional resonance is excited at the higher frequency band, and hence much wider impedance bandwidth can be attained. Applications of the proposed dual band-notched ultra-wideband (UWB) antenna structure with 5.2 GHz and 8.2 GHz center frequencies are demonstrated experimentally. Measured and simulated results of the magnitude of S₁₁, radiation patterns and realized gains show good agreement.     

A Simple Ultrawideband Planar Rectangular Printed Antenna With Band Dispensation

A compact planar ultrawideband (UWB) antenna with band notched characteristics is presented. Modification in the shape of radiation element and ground plane with two symmetrical bevel slots on the lower edge of the radiation element and on the upper edge of the ground plane makes the antenna different from the rectangular printed monopole. These slots improve the input impedance bandwidth and the high frequency radiation characteristics. With this design, the reflection coefficient is lower than 10 dB in the 3.1–10.6 GHz frequency range and radiation pattern is similar to dipole antenna. With the inclusion of an additional small radiation patch, a frequency-notched antenna is also designed and good out of band performance from 5.0–6.0 GHz can be achieved. Measured results confirm that the antenna is suitable for UWB applications due to its compact size and high performance. Also an approximate empirical expression to calculate the lowest resonant frequency is proposed.      

A Pentagonal Shaped Microstrip Planar Antenna with Defected Ground Structure for Ultrawideband Applications

A new compact pentagonal microstrip patch antenna with slotted ground plane structure, developed for use in ultrawideband applications, is studied in this article. The proposed antenna is mainly constituted by a pentagonal shaped patch antenna, a defected ground plane structure, two stubs, and four slots to improve the bandwidth. The designed antenna has an overall dimension of 30?×?17.59?×?1.6 mm³, for WIMAX/WLAN/WiFi/HIPERLAN-2 /Bluetooth/LTE/5G applications with a very large bandwidth starting from 2.66 to 10.82 GHz (S₁₁?<???6 dB). A parametric study of the ground plane structure was carried out to find the final and the optimal UWB antenna, and to confirm that the antenna has good performance and broader bandwidth. The proposed antenna prototype has been fabricated. The measured results indicate that the antenna has a good impedance matching. The antenna has an electrically small dimension with a good gain, a notable efficiency, and a wide impedance bandwidth, which makes this antenna an excellent candidate for ultrawideband wireless communication, microwave imaging, radar applications, and the major part of the mobile phone frequencies as well.

     

Compact body-worn MIMO antenna with high port isolation for UWB applications

This article investigates the mutual coupling reduction of a compact two elements wearable ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna. The ground plane of the proposed wearable MIMO antenna structure consists of three connected square ring-shaped stubs and two rectangular slots of narrow height. These ground stubs and slots minimize the mutual coupling effect between antennas and provide high isolation. The suggested MIMO antenna functions from the 1.87 to 13.82 GHz frequency spectrum covering WLAN (2.4–2.484 GHz), UWB (3.1–10.6 GHz), and X band (8–12 GHz) with 152.32% fractional bandwidth. It sustains port isolation above 27 dB throughout the 2 to 13.82 GHz frequency band. Inside the whole working frequency band, the suggested antenna offers a tiny envelope correlation coefficient (ECC < 0.098), greater diversity gain (DG > 9.93 dB), minimum channel capacity loss (CCL < 0.32 bits/s/Hz), and slight magnitude variation in mean effective gain of antenna ports (< 0.1 dB). The recommended antenna yields a SAR level below the designated threshold (<1.6 W/kg), affirming its suitability for body-worn applications. The designed MIMO antenna structure has an overall volume of 32 × 48 × 1.5 mm³.     

Printed Planar Monopole Antenna Design for Ultra-Wideband Communications

This paper presents an ultra wideband (UWB) planar printed monopole antenna fed by microstrip line. The antenna configuration contains a beveled ground plane. The beveled partial ground plane improves the impedance bandwidth. The measured frequency response demonstrates that the fabricated antenna exhibits an impedance bandwidth of 7.9 GHz over 3.1 to 11 GHz for VSWR < 2. The proposed antenna has ultra-wideband characteristics with omnidirectional radiation pattern and stable gain. Ultra-wideband performance of the proposed antenna is examined through the simulated surface current distributions. Measured results confirm that the antenna is suitable for UWB applications due to its compact size and high performance characteristics.     

Compact coplanar waveguide fed ultra wideband antenna with a notch band characteristic

A coplanar waveguide (CPW) fed ultra-wideband (UWB) antenna with a notch band characteristic is presented for 2.4 GHz and UWB applications. The bandwidth is broadened by embedding two inverted L-shaped slots in the CPW ground and the notch band is achieved by etching a rectangle slot in the CPW ground. The notched band can be controlled by adjusting the length of the rectangle slot and the two inverted L-shaped slots. Experimental and numerical results show that the proposed antenna with compact size of 28 × 21 mm², has an impedance bandwidth range from 2.38 GHz to 12.0 GHz for voltage standing-wave ratio (VSWR) less than 2, expect the notch band frequency 5.0–6.0 GHz for HIPERLAN/2, IEEE 802.11a (5.1–5.9 GHz) and C-band (4.4–5 GHz) for satellite and military applications.     

Design of a Compact Hexagonal Monopole Antenna for Ultra—Wideband Applications

This paper presents two design compact hexagonal monopole antennas for ultra-wideband applications. The two antennas are fed by a single microstrip line . The Zeland IE3D version 12 is employed for analysis at the frequency band of 4 to 14 GHz which has approved as a commercial UWB band. The experimental and simulation results exhibit good agreement together for antenna 1. The proposed antenna1 is able to achieve an impedance bandwidth about 111%. The proposed antenna2 is able to achieve an impedance bandwidth about (31.58%) for lower frequency and (62.54%) for upper frequency bandwidth. A simulated frequency notched band ranging from 6.05 GHz to 7.33 GHz and a measured frequency notched band ranging from 6.22 GHz to 8.99 GHz are achieved and gives one narrow band of axial ratio (1.43%). The proposed antennas can be used in wireless ultra-wideband (UWB) communications.     

Compact UWB Antenna with High Rejection Triple Band-Notch Characteristics for Wireless Applications

In this paper, small printed flower-shape triple notch ultra-wideband (UWB) monopole antenna with high band rejection is presented. Notch bands include WiMAX (IEEE802.16 3.30–3.80 GHz), WLAN IEEE802.11a/h/j/n (5.15–5.35, 5.25–5.35, 5.47–5.725, 5.725–5.825 GHz), and X-band downlink satellite system (7.1–7.9 GHz). By including inverted T-shape stub and etching two C-shaped slots on the radiating patch, triple band-notch function is obtained with measured high band rejection (VSWR = 14.52 at 3.58 GHz, VSWR = 15.88 at 5.69 GHz and VSWR = 6.95 at 7.61 GHz) and covers a UWB useable fractional bandwidth of 114.30% (2.74–10.57 GHz = 7.83 GHz). In short the antenna offers triple band-notch UWB systems as a compact multifunctional antenna to reduce the number of antennas installed in wireless devices for accessing multiple wireless networks with wide radiation pattern. The proposed antenna has a small size of about 0.25λ × 0.30λ at 4.2 GHz (first resonance frequency), which has a size reduction of 30% with respect to the earlier published antenna. Both the experimental and simulated results of the proposed antenna are presented, indicating that the antenna is a good candidate for various UWB applications.

     

Compact CPW-Fed ultrawideband MIMO antenna using hexagonal ring monopole antenna elements

In this paper, a compact coplanar waveguide (CPW) fed ultra-wide band (UWB) multi input multi output (MIMO) antenna is proposed. The antenna consists of two antiparallel hexagonal ring monopole elements. Circular arcs shaped grounded stubs are used to enhance the isolation, both the arcs are connected through stub to make common ground. Tapering of the slots of CPW feed line at feed point, and grounded slots are introduced for impedance matching over UWB. The proposed antenna is fabricated and impedance bandwidth, isolation, radiation pattern, and gain are measured. Moreover, envelop correlation coefficient (ECC) results are given. Proposed antenna structure operates in the frequency range 3–12 GHz with a fractional bandwidth of 120% keeping isolation better than 15 dB. The antenna has a compact size of 45 × 25 mm².     

一种新型的双陷波特性超宽带天线的设计

提出了一种新型的具有双陷波特性的超宽带天线。该天线在2.8～12 GHz 的宽频带范围内电压驻波比(VSWR)小于2,通过在馈线上引出两个枝节获得了3.3～3.9 GHz 和5～6 GHz 的双陷波特性。通过调节枝节的长度和宽度可以很容易的调节阻带的位置和宽度。仿真和测试结果表明这种新型的天线具有良好的阻抗特性和辐射特性。该天线结构简单,易于加工,便于集成。文中给出了天线的设计以及不同参数对天线性能的影响     

CPW-fed ultra-wideband antenna with compact size

A coplanar waveguide (CPW)-fed ultra-wideband (UWB) antenna with compact size is presented. The entire size of the antenna is as small as 30times13times1.6timesmm. The measured and simulated impedance bandwidth defined by voltage-standing wave ratios <2 is from 3.1 to more than 10.6 GHz. The proposed antenna exhibits a nearly omni-directional radiation pattern with very compact size, which is suitable for various portable UWB systems.     

一种新型具有双陷波特性的超宽带天线设计

本文提出了一种新型紧凑的具有双陷波特性的印刷超宽带天线。天线采用微带传输线馈电,并通过圆形与矩形 的混合结构辐射单元和带有矩形开槽结构的地板来实现天线的超宽带特性,工作带宽覆盖UWB 频率范围。通过地板上 两个对称的J 形开槽和微带馈线两侧对称添加的线型结构单元来实现双陷波特性,两个陷波频段刚好覆盖了3.5GHz 的 WIMAX 频段标准和5.2/5.8GHz 的WLAN 频段标准。同时,该天线在工作频带范围内具有良好的辐射特性,符合超宽带 通信的使用标准。     

Design and investigations on a compact,UWB, monopole antenna with reconfigurable band notches for 5.2/5.8 GHz WLAN and 5.5 GHz Wi‐MAX bands

This article represents a microstrip line–fed novel circular monopole antenna with ultra‐wideband (UWB) characteristics. The compact antenna provides reconfigurable notches at WLAN (5.2/5.8 GHz) and Wi‐MAX (5.5 GHz) frequency bands. The band rejection is achieved by etching an open‐ended L‐shaped slot in the ground plane, which effectively mitigates the interference between WLAN, Wi‐MAX, and UWB systems with an effective patch area of 36.26%. The proposed antenna operates from 3.05 to 12.11 GHz with VSWR 2 except at stopband (3.89‐5.93 GHz) to filter the WLAN and Wi‐MAX signals. The simulated return loss, gain, and radiation pattern of the proposed antenna has been experimentally verified with the fabricated one which holds a good agreement.