High Throughput‐Per‐Footprint Inertial Focusing

Matching the scale of microfluidic flow systems with that of microelectronic chips for realizing monolithically integrated systems still needs to be accomplished. However, this is appealing only if such re‐scaling does not compromise the fluidic throughput. This is related to the fact that the cost of microelectronic circuits primarily depends on the layout footprint, while the performance of many microfluidic systems, like flow cytometers, is measured by the throughput. The simple operation of inertial particle focusing makes it a promising technique for use in such integrated flow cytometer applications, however, microfluidic footprints demonstrated so far preclude monolithic integration. Here, the scaling limits of throughput‐per‐footprint (TPFP) in using inertial focusing are explored by studying the interplay between theory, the effect of channel Reynolds numbers up to 1500 on focusing, the entry length for the laminar flow to develop, and pressure resistance of the microchannels. Inertial particle focusing is demonstrated with a TPFP up to 0.3 L/(min cm²) in high aspect‐ratio rectangular microfluidic channels that are readily fabricated with a post‐CMOS integratable process, suggesting at least a 100‐fold improvement compared to previously demonstrated techniques. Not only can this be an enabling technology for realizing cost‐effective monolithically integrated flow cytometry devices, but the methodology represented here can also open perspectives for miniaturization of many biomedical microfluidic applications requiring monolithic integration with microelectronics without compromising the throughput.     

High Performance Quasi‐2D Perovskite Sky‐Blue Light‐Emitting Diodes Using a Dual‐Ligand Strategy

For quasi‐2D perovskite light‐emitting diodes, the introduction of insulating bulky cation reduces the charge transport property, leading to lowered brightness and increased turn‐on voltage. Herein, a dual‐ligand strategy is adopted to prepare perovskite films by using an appropriate ratio of i‐butylammonium (iBA) and phenylethylammonium (PEA) as capping ligands. The introduction of iBA enhances the binding energy of the ligands on the surface of the quasi‐2D perovskite, and effectively controls the proportion of 2D perovskite to allow more efficient energy transfer, resulting in the great enhancement of the electric and luminescent properties of the perovskite. The photoluminescence (PL) mapping of the perovskite films exhibits that enhanced photoluminescence performance with better uniformity and stronger intensity can be achieved with this dual‐ligand strategy. By adjusting the proportion of the two ligands, sky‐blue perovskite light‐emitting diodes (PeLEDs) with electroluminescence (EL) peak located 485 nm are achieved with a maximum luminance up to 1130 cd m^?2 and a maximum external quantum efficiency (EQE) up to 7.84%. In addition, the color stability and device stability are significantly enhanced by using a dual‐ligand strategy. This simple and feasible method paves the way for improving the performance of quasi‐2D PeLEDs.     

Beyond Activated Carbon: Graphite‐Cathode‐Derived Li‐Ion Pseudocapacitors with High Energy and High Power Densities

Supercapacitors have aroused considerable attention due to their high power capability, which enables charge storage/output in minutes or even seconds. However, to achieve a high energy density in a supercapacitor has been a long‐standing challenge. Here, graphite is reported as a high‐energy alternative to the frequently used activated carbon (AC) cathode for supercapacitor application due to its unique Faradaic pseudocapacitive anion intercalation behavior. The graphite cathode manifests both higher gravimetric and volumetric energy density (498 Wh kg^?1 and 431.2 Wh l^?1) than an AC cathode (234 Wh kg^?1 and 83.5 Wh l^?1) with peak power densities of 43.6 kW kg^?1 and 37.75 kW l^?1. A new type of Li‐ion pseudocapacitor (LIpC) is thus proposed and demonstrated with graphite as cathode and prelithiated graphite or Li₄Ti₅O₁₂ (LTO) as anode. The resultant graphite–graphite LIpCs deliver high energy densities of 167–233 Wh kg^?1 at power densities of 0.22–21.0 kW kg^?1 (based on active mass in both electrodes), much higher than 20–146 Wh kg^?1 of AC‐derived Li‐ion capacitors and 23–67 Wh kg^?1 of state‐of‐the‐art metal oxide pseudocapacitors. Excellent rate capability and cycling stability are further demonstrated for LTO‐graphite LIpCs.     

In Situ Two‐Step Photoreduced SERS Materials for On‐Chip Single‐Molecule Spectroscopy with High Reproducibility

A method is developed to synthesize surface‐enhanced Raman scattering (SERS) materials capable of single‐molecule detection, integrated with a microfluidic system. Using a focused laser, silver nanoparticle aggregates as SERS monitors are fabricated in a microfluidic channel through photochemical reduction. After washing out the monitor, the aggregates are irradiated again by the same laser. This key step leads to full reduction of the residual reactants, which generates numerous small silver nanoparticles on the former nanoaggregates. Consequently, the enhancement ability of the SERS monitor is greatly boosted due to the emergence of new “hot spots.” At the same time, the influence of the notorious “memory effect” in microfluidics is substantially suppressed due to the depletion of surface residues. Taking these advantages, two‐step photoreduced SERS materials are able to detect different types of molecules with the concentration down to 10^?13m . Based on a well‐accepted bianalyte approach, it is proved that the detection limit reaches the single‐molecule level. From a practical point of view, the detection reproducibility at different probing concentrations is also investigated. It is found that the effective single‐molecule SERS measurements can be raised up to ≈50%. This microfluidic SERS with high reproducibility and ultrasensitivity will find promising applications in on‐chip single‐molecule spectroscopy.     

A Silica‐Aerogel‐Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

High‐energy all‐solid‐state lithium (Li) batteries have great potential as next‐generation energy‐storage devices. Among all choices of electrolytes, polymer‐based systems have attracted widespread attention due to their low density, low cost, and excellent processability. However, they are generally mechanically too weak to effectively suppress Li dendrites and have lower ionic conductivity for reasonable kinetics at ambient temperature. Herein, an ultrastrong reinforced composite polymer electrolyte (CPE) is successfully designed and fabricated by introducing a stiff mesoporous SiO₂ aerogel as the backbone for a polymer‐based electrolyte. The interconnected SiO₂ aerogel not only performs as a strong backbone strengthening the whole composite, but also offers large and continuous surfaces for strong anion adsorption, which produces a highly conductive pathway across the composite. As a consequence, a high modulus of ≈0.43 GPa and high ionic conductivity of ≈0.6 mS cm^?1 at 30 °C are simultaneously achieved. Furthermore, LiFePO₄–Li full cells with good cyclability and rate capability at ambient temperature are obtained. Full cells with cathode capacity up to 2.1 mAh cm^?2 are also demonstrated. The aerogel‐reinforced CPE represents a new design principle for solid‐state electrolytes and offers opportunities for future all‐solid‐state Li batteries.