Low Roll‐Off and High Efficiency Orange Organic Light Emitting Diodes with Controlled Co‐Doping of Green and Red Phosphorescent Dopants in an Exciplex Forming Co‐Host

An exciplex forming co‐host is introduced in order to fabricate orange organic light‐emitting diodes (OLEDs) with high efficiency, low driving voltage and an extremely low efficiency roll‐off, by the co‐doping of green and red emitting phosphorescence dyes in the host. The orange OLEDs achieves a low turn‐on voltage of 2.4 V, which is equivalent to the triplet energy gap of the phosphorescent‐green emitting dopant, and a very high external quantum efficiency (EQE) of 25.0%. Moreover, the OLEDs show low efficiency roll‐off with an EQE of over 21% at 10 000 cdm^?2. The device displays a very good orange color (CIE of (0.501, 0.478) at 1000 cdm^?2) with very little color shift with increasing luminance. The transient electroluminescence of the OLEDs indicate that both energy transfer and direct charge trapping takes place in the devices.     

An Exciplex Forming Host for Highly Efficient Blue Organic Light Emitting Diodes with Low Driving Voltage

The exciplex forming co‐host with phosphorescent dopant system has potential to realize highly efficient phosphorescent organic light emitting didoes (PhOLEDs). However, the exciplex forming co‐host for blue phosphorescent OLEDs has been rarely introduced because of higher triplet level of the blue dopant than green and red dopants. In this work, a novel exciplex forming co‐host with high triplet energy level is developed by mixing a phosphine oxide based electron transporting material, PO‐T2T, and a hole transporting material, N,N′‐dicarbazolyl‐3,5‐benzene (mCP). Photo‐physical analysis shows that the exciplexes are formed efficiently in the host and the energy transfer from the exciplex to blue phosphorescent dopant (iridium(III)bis[(4,6‐difluorophenyl)‐pyridinato‐N,C2′]picolinate; FIrpic) is also efficient, enabling the triplet harvest without energy loss. As a result, an unprecedented high performance blue PhOLED with the exciplex forming co‐host is demonstrated, showing a maximum external quantum efficiency (EQE) of 30.3%, a maximum power efficiency of 66 lm W^?1, and low driving voltage of 2.75 at 100 cd m^?2, 3.29 V at 1000 cd m^?2, and 4.65 V at 10 000 cd m^?2, respectively. The importance of the exciton confinement in the exciplex forming co‐host is further investigated which is directly related to the performance of PhOLEDs.     

Efficient Nondoped Blue Fluorescent Organic Light‐Emitting Diodes (OLEDs) with a High External Quantum Efficiency of 9.4% @ 1000 cd m−2 Based on Phenanthroimidazole−Anthracene Derivative

Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m^?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m^?2. The maximum luminescence is ≈57 000 cd m^?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.     

Langevin and Trap‐Assisted Recombination in Phosphorescent Organic Light Emitting Diodes

Bimolecular and trap‐assisted recombination mechanisms are investigated in small molecule‐based phosphorescent organic light emitting diodes (PhOLEDs) using the current?voltage?luminance characteristics in the diffusion current region, along with transient electroluminescence and capacitance measurements. Two different PhOLEDs, one with a single host, 4,4′‐Bis(carbazol‐9‐yl)biphenyl, and the other with an exciplex‐forming co‐host, are studied. Trap‐assisted recombination with a large number of trapped charges is dominant in the PhOLED with the single host because of the large energy gap between the host and the dopant state. In contrast, bimolecular Langevin recombination is dominant in the PhOLED with the exciplex forming co‐host, where a phosphorescent dye is doped in the co‐host. As a result, the accumulated charge density is lower in the co‐host system than in the single host emission layer, leading to high efficiency that approaches the theoretical limit, with an extremely low efficiency roll‐off.     

Achieving High‐Performance Nondoped OLEDs with Extremely Small Efficiency Roll‐Off by Combining Aggregation‐Induced Emission and Thermally Activated Delayed Fluorescence

Luminescent materials with thermally activated delayed fluorescence (TADF) can harvest singlet and triplet excitons to afford high electroluminescence (EL) efficiencies for organic light‐emitting diodes (OLEDs). However, TADF emitters generally have to be dispersed into host matrices to suppress emission quenching and/or exciton annihilation, and most doped OLEDs of TADF emitters encounter a thorny problem of swift efficiency roll‐off as luminance increases. To address this issue, in this study, a new tailor‐made luminogen (dibenzothiophene‐benzoyl‐9,9‐dimethyl‐9,10‐dihydroacridine, DBT‐BZ‐DMAC) with an unsymmetrical structure is synthesized and investigated by crystallography, theoretical calculation, spectroscopies, etc. It shows aggregation‐induced emission, prominent TADF, and interesting mechanoluminescence property. Doped OLEDs of DBT‐BZ‐DMAC show high peak current and external quantum efficiencies of up to 51.7 cd A^?1 and 17.9%, respectively, but the efficiency roll‐off is large at high luminance. High‐performance nondoped OLED is also achieved with neat film of DBT‐BZ‐DMAC, providing excellent maxima EL efficiencies of 43.3 cd A^?1 and 14.2%, negligible current efficiency roll‐off of 0.46%, and external quantum efficiency roll‐off approaching null from peak values to those at 1000 cd m^?2. To the best of the authors' knowledge, this is one of the most efficient nondoped TADF OLEDs with small efficiency roll‐off reported so far.     

Novel Strategy to Develop Exciplex Emitters for High‐Performance OLEDs by Employing Thermally Activated Delayed Fluorescence Materials

To develop high‐performance thermally activated delayed fluorescence (TADF) exciplex emitters, a novel strategy of introducing a single‐molecule TADF emitter as one of the constituting materials has been presented. Such a new type of exciplex TADF emitter will have two reverse intersystem crossing (RISC) routes on both the pristine TADF molecules and the exciplex emitters, benefiting the utilization of triplet excitons. Based on a newly designed and synthesized single‐molecule TADF emitter MAC, a highly efficient exciplex emitter MAC:PO‐T2T has been obtained. The device based on MAC:PO‐T2T with a weight ratio of 7:3 exhibits a low turn‐on voltage of 2.4 V, high maximum efficiency of 52.1 cd A^?1 (current efficiency), 45.5 lm W^?1 (power efficiency), and 17.8% (external quantum efficiency, EQE), as well as a high EQE of 12.3% at a luminance of 1000 cd m^?2. The device shows the best performance among reported organic light‐emitting devices based on exciplex emitters. Such high‐efficiency and low‐efficiency roll‐off should be ascribed to the additional reverse intersystem crossing process on the MAC molecules, showing the advantages of the strategy described in this study.     

Exciton and Polaron Quenching in Doping‐Free Phosphorescent Organic Light‐Emitting Diodes from a Pt(II)‐Based Fast Phosphor

By introducing a neat Pt(II)‐based phosphor with a remarkably short decay lifetime, a simplified doping‐free phosphorescent organic light‐emitting diode (OLED) with a forward viewing external quantum efficiency (EQE) and power efficiency of 20.3 ± 0.5% and 63.0 ± 0.4 lm W^?1, respectively, is demonstrated. A quantitative analysis of how triplet‐triplet annihilation (TTA) and triplet‐polaron annihilation (TPA) affect the device EQE roll‐off at high current densities is performed. The contributions from loss of charge balance associated with charge leakage and field‐induced exciton dissociation are found negligible. The rate constants k_TTA and k_TPA are determined by time‐resolved photoluminescence experiments of a thin film and an electrically‐driven unipolar device, respectively. Using the parameters extracted experimentally, the EQE is modeled versus electric current characteristics of the OLEDs by taking both TTA and TPA into account. Based on this model, the impacts of the emitter lifetime, quenching rate constants, and exciton formation zone upon device efficiency are analyzed. It is found that the short lifetime of the neat emitter is key for the reduction of triplet quenching.     

Pyridine‐Containing Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs with Ultralow Operating Voltage and Reduced Efficiency Roll‐Off

A series of pyridine‐containing electron‐transport materials are developed as an electron‐transport layer for the FIrpic‐based blue phosphorescent organic light‐emitting diodes. Their energy levels can be tuned by the introduction of pyridine rings in the framework and on the periphery of the molecules. Significantly reduced operating voltage is achieved without compromising external quantum efficiency by solely tuning the nitrogen atom orientations of those pyidine rings. Unprecedented low operating voltages of 2.61 and 3.03 V are realized at 1 and 100 cd m^?2, giving ever highest power efficiency values of 65.8 and 59.7 lm W^?1, respectively. In addition, the operating voltages at 100 cd m^?2 can be further reduced to 2.70 V by using a host material with a small singlet‐triplet exchange energy, and the threshold voltage for electroluminescence can even be 0.2–0.3 V lower than the theoretical minimum value of the photon energy divided by electron charge. Aside from the reduced operating voltage, a further reduced roll‐off in efficiency is also achieved by the combination of an appropriate host material.     

Towards High Efficiency and Low Roll‐Off Orange Electrophosphorescent Devices by Fine Tuning Singlet and Triplet Energies of Bipolar Hosts Based on Indolocarbazole/1, 3, 5‐Triazine Hybrids

Orange‐emitting phosphorescent organic light‐emitting diodes (PHOLEDs) are drawing more and more attention; however, high‐performance hosts designed for orange PHOLEDs are rare. Here, four indolocarbazole/1, 3, 5‐triazine hybrids are synthesized to optimize the singlet and triplet energies, as well as transporting properties, for ideal orange PHOLEDs. By introducing moieties with different electronegativity, a graded reduction of the singlet and triplet energies is achieved, resulting in minimum injection barrier and minimum energy loss. Besides, the charge transporting abilities are also tuned to be balanced on the basis of the bipolar features of those materials. The optimized orange PHOLED shows a maximum external quantum efficiency (EQE) of 24.5% and a power efficiency of 64 lm W^–1, both of which are among the best values for orange PHOLEDs. What is more, the efficiency roll‐off is extremely small, with an EQE of 24.4% at 1000 cd m^–2 and 23.8% at 10 000 cd m^–2, respectively, which is the lowest efficiency roll‐off for orange PHOLEDs to date, resulting in the highest EQE for orange PHOLEDs when the luminance is above 1000 cd m^–2. Besides the balanced charges, the small roll‐off is also attributed to the wide recombination zone resulting from the bipolar features of the hosts.     

An Indolocarbazole‐Based Thermally Activated Delayed Fluorescence Host for Solution‐Processed Phosphorescent Tandem Organic Light‐Emitting Devices Exhibiting Extremely Small Efficiency Roll‐Off

The study reports the development of a solution‐processed phosphorescent tandem organic light‐emitting device (OLED) exhibiting extremely small efficiency roll‐off. The OLED comprises two light‐emitting units (LEUs) connected by an interconnecting unit and employs a thermally activated delayed fluorescence host material. One of the most difficult tasks in the fabrication of OLEDs is to form a multilayer structure without dissolving the underlayer during the coating of the upper layer. The developed host materials exhibit high tolerance to methanol. The upper‐layer adjacent to the light‐emitting layer consists of ZnO nanoparticles, which could be dispersed in methanol by improving the preparation method. This results in the successful fabrication of a solution‐processed phosphorescent tandem OLED comprising two LEUs. The maximum external quantum efficiency (EQE) of the tandem device is 22.8%, and the EQE is 21.9% even at a high luminance of 10 000 cd m^?2. The suppression of efficiency roll‐off is among the best of those previously reported. Moreover, the operational stability of the tandem device is much higher compared with single‐LEU devices.     

Utilizing a Spiro TADF Moiety as a Functional Electron Donor in TADF Molecular Design toward Efficient “Multichannel” Reverse Intersystem Crossing

Designing thermally activated delayed fluorescence (TADF) materials with an efficient reverse intersystem crossing (RISC) process is regarded as the key to actualize efficient organic light‐emitting diodes (OLEDs) with low efficiency roll‐off. Herein, a novel molecular design strategy is reported where a typical TADF material 10‐phenyl‐10H, 10′H‐spiro[acridine‐9, 9′‐anthracen]‐10′‐one (ACRSA) is utilized as a functional electron donor to design TADF materials of 2,4,6‐triphenyl‐1,3,5‐triazine(TRZ)‐p‐ACRSA and TRZ‐m‐ACRSA. It is unique that the intramolecular charge transfer of the ACRSA moiety and the intramolecular and through‐space intermolecular charge transfer between the TRZ and ACRSA moieties, provide a “multichannel” effect to enhance the rate of the reverse intersystem crossing process (k_risc) exceeding 10^?6 s^?1. TADF OLEDs based on TRZ‐p‐ACRSA as an emitter show a maximum external quantum efficiency (EQE) of 28% with reduced efficiency roll‐off (EQEs of 27.5% and 22.1% at 100 and 1000 cd m^?2, respectively). Yellow phosphorescent OLEDs utilizing TRZ‐p‐ACRSA as a host material show record‐high EQE of 25.5% and power efficiency of 115 lm W^?1, while phosphorescent OLEDs based on TRZ‐m‐ACRSA show further lower efficiency roll‐off with EQEs of 25.2%, 24.3%, and 21.5% at 100, 1000, and 10 000 cd m^?2, respectively.     

Efficiency Roll‐Off in Blue Emitting Phosphorescent Organic Light Emitting Diodes with Carbazole Host Materials

The efficiency roll‐off in blue phosphorescent organic light emitting diodes (OLEDs) using different carbazole compounds as the host is systematically studied. While there is no significant difference in device efficiency, OLEDs using ter‐carbazole as the host show a reduction in efficiency roll‐off at high luminance. Data from transient photoluminescence and electroluminescence measurements show that the lower triplet–triplet annihilation (TTA) and triplet–polaron quenching (TPQ) rates in devices with the ter‐carbazole host compared with other carbazole hosts are the reasons for this reduced efficiency roll‐off. It is also found that the host materials with low glass transition temperatures are more susceptible to the efficiency roll‐off problem.     

Thermally Activated Delayed Fluorescence Material as Host with Novel Spiro‐Based Skeleton for High Power Efficiency and Low Roll‐Off Blue and White Phosphorescent Devices

Efficiency roll‐off in blue organic light‐emitting diodes especially at high brightness still remains a vital issue for which the excitons density‐dependent mechanism of host materials takes most responsibility. Additionally, the efficiency roll‐off leads to high power consumption and reduces the operating lifetime because higher driving voltage and current are required. Here, by subtly modifying the triphenylamine to oxygen‐bridged quasi‐planar structure, a novel thermally activated delayed fluorescence type blue host Tri‐o‐2PO is successfully developed. Efficiency roll‐off based on Tri‐o‐2PO is ultralow with external quantum efficiency (EQE) just dropping by around 2% in the high luminance range from 1000 cd m^?2 to 10 000 cd m^?2. As expected, low turn‐on voltage (≈2.9 V) of device is also achieved, which is close to the theory limit value (≈2.62 V). Super‐high power efficiency (≈60 lm W^?1) and EQE (>22%) are also achieved when utilizing Tri‐o‐2PO as host. Furthermore, two‐color warm‐white light with CIE of (0.45, 0.43) and correlated color temperature of 2921 K is also fabricated and a champion EQE of 21% is delivered. These excellent performances prove the strategy of bridging the triphenylamine to reduce ΔE_st is validated and suggest the great potential of this novel skeleton.     

Correlation Between Triplet–Triplet Annihilation and Electroluminescence Efficiency in Doped Fluorescent Organic Light‐Emitting Devices

Triplet–triplet annihilation (TTA) is studied in a wide range of fluorescent host:guest emitter systems used in organic light‐emitting devices (OLEDs). Strong TTA is observed in host:guest systems in which the dopant has a limited charge‐trapping capability. On the other hand, systems in which the dopant can efficiently trap charges show insignificant TTA, an effect that is due, in part, to the efficient quenching of triplet excitons by the trapped charges. Fluorescent host:guest systems with the strongest TTA are found to give the highest OLED electroluminescence efficiency, a phenomenon attributed to the role of TTA in converting triplet excitons into additional singlet excitons, thus appreciably contributing to the light output of OLEDs. The results shed light on and give direct evidence for the phenomena behind the recently reported very high efficiencies attainable in fluorescent host:guest OLEDs with quantum efficiencies exceeding the classical 25% theoretical limit.     

Manipulation of Charge and Exciton Distribution Based on Blue Aggregation‐Induced Emission Fluorophors: A Novel Concept to Achieve High‐Performance Hybrid White Organic Light‐Emitting Diodes

The aggregation‐induced emission (AIE) phenomenon is important in organic light‐emitting diodes (OLEDs), for it can potentially solve the aggregation‐caused quenching problem. However, the performance of AIE fluorophor‐based OLEDs (AIE OLEDs) is unsatisfactory, particularly for deep‐blue devices (CIEy < 0.15). Here, by enhancing the device engineering, a deep‐blue AIE OLED exhibits low voltage (i.e., 2.75 V at 1 cd m^?2), high luminance (17 721 cd m^?2), high efficiency (4.3 lm W^?1), and low efficiency roll‐off (3.6 lm W^?1 at 1000 cd m^?2), which is the best deep‐blue AIE OLED. Then, blue AIE fluorophors, for the first time, have been demonstrated to achieve high‐performance hybrid white OLEDs (WOLEDs). The two‐color WOLEDs exhibit i) stable colors and the highest efficiency among pure‐white hybrid WOLEDs (32.0 lm W^?1); ii) stable colors, high efficiency, and very low efficiency roll‐off; or iii) unprecedented efficiencies at high luminances (i.e., 70.2 cd A^?1, 43.4 lm W^?1 at 10 000 cd m^?2). Moreover, a three‐color WOLED exhibits wide correlated color temperatures (10 690–2328 K), which is the first hybrid WOLED showing sunlight‐style emission. These findings will open a novel concept that blue AIE fluorophors are promising candidates to develop high‐performance hybrid WOLEDs, which have a bright prospect for the future displays and lightings.     

Tilted Spiro‐Type Thermally Activated Delayed Fluorescence Host for ≈100% Exciton Harvesting in Red Phosphorescent Electronics with Ultralow Doping Ratio

Despite promising efficiency, the high fabrication cost due to the required high concentrations of noble metal based phosphors is still problematic for phosphorescent organic light‐emitting diodes (PhOLEDs). This situation becomes even serious considering some practical applications need high luminance, which in turn requires a higher concentration of emitters. A paradigm shift to circumvent these issues can be development of materials that are able to operate efficiently in very low concentrations ( < 1 wt%). Here, two thermally activated delayed fluorescence hosts ( OSTFPCN and OSTFPB ) with tilted spiro geometry, small singlet‐triplet splitting ( Δ E _st), and effective resonance energy transfer are developed. Within expectation, record performances with a power efficiency of 63.6 lm W^?1 and an external quantum efficiency (EQE) of 31.2% for the red phosphor Ir(MDQ)₂(acac) (2.0 wt%) are achieved with OSTFPCN as host. Additionally, a high power efficiency around 58 lm W^?1 is also gained even at an ultralow dopant concentration of 0.5 wt% for a OSTFPB based device. Mechanism studies demonstrate that efficiency roll‐off can be effectively suppressed in such low concentrations. These findings pave a new way to exploit low cost and high efficiency PhOLEDs.     

“Trade‐Off” Hidden in Condensed State Solvation: Multiradiative Channels Design for Highly Efficient Solution‐Processed Purely Organic Electroluminescence at High Brightness

Actualizing highly efficient solution‐processed thermally activated delayed fluorescent (TADF) organic light‐emitting diodes (OLEDs) at high brightness becomes significant to the popularization of purely organic electroluminescence. Herein, a highly soluble emitter benzene‐1,3,5‐triyltris((4‐(9,9‐dimethylacridin‐10(9H)‐yl)phenyl)methanone was developed, yielding high delayed fluorescence rate (k_TADF > 10⁵ s^?1) ascribed to the multitransition channels and tiny singlet–triplet splitting energy (ΔE_ST ≈ 32.7 meV). The triplet locally excited state is 0.38 eV above the lowest triplet charge‐transfer state, assuring a solely thermal equilibrium route for reverse intersystem crossing. Condensed state solvation effect unveils a hidden “trade‐off”: the reverse upconversion and triplet concentration quenching processes can be promoted but with a reduced radiative rate from the increased dopant concentration and the more polarized surroundings. Striking a delicate balance, corresponding vacuum‐evaporated and solution‐processed TADF‐OLEDs realized maximum external quantum efficiencies (EQEs) of ≈26% and ≈22% with extremely suppressed efficiency roll‐off. Notably, the wet‐processed one achieves to date the highest EQEs of 20.7%, 18.5%, 17.1%, and 13.6%, among its counterparts at the luminance of 1000, 3000, 5000, and 10 000 cd m^?2, respectively.     

Exciton‐Adjustable Interlayers for High Efficiency,Low Efficiency Roll‐Off,and Lifetime Improved Warm White Organic Light‐Emitting Diodes (WOLEDs) Based on a Delayed Fluorescence Assistant Host

Recently, a new route to achieve 100% internal quantum efficiency white organic light‐emitting diodes (WOLEDs) is proposed by utilizing noble‐metal‐free thermally activated delayed fluorescence (TADF) emitters due to the radiative contributions of triplet excitons by effective reverse intersystem crossing. However, a systematic understanding of their reliability and internal degradation mechanisms is still deficient. Here, it demonstrates high performance and operational stable purely organic fluorescent WOLEDs consisting of a TADF assistant host via a strategic exciton management by multi‐interlayers. By introducing such interlayers, carrier recombination zone could be controlled to suppress the generally unavoidable quenching of long‐range triplet excitons, successfully achieving remarkable external quantum efficiency of 15.1%, maximum power efficiency of 48.9 lm W⁻¹, and extended LT50 lifetime (time to 50% of initial luminance of 1000 cd m⁻²) exceeding 2000 h. To this knowledge, this is the first pioneering work for realizing high efficiency, low efficiency roll‐off, and operational stable WOLEDs based on a TADF assistant host. The current findings also indicate that broadening the carrier recombination region in both interlayers and yellow emitting layer as well as restraining exciplex quenching at carrier blocking interface make significant roles on reduced efficiency roll‐off and enhanced operational lifetime.     

Naphthothiadiazole‐Based Near‐Infrared Emitter with a Photoluminescence Quantum Yield of 60% in Neat Film and External Quantum Efficiencies of up to 3.9% in Nondoped OLEDs

Fluorescent emitters have regained intensive attention in organic light emitting diode (OLED) community owing to the breakthrough of the device efficiency and/or new emitting mechanism. This provides a good chance to develop new near‐infrared (NIR) fluorescent emitter and high‐efficiency device. In this work, a D‐π‐A‐π‐D type compound with naphthothiadiazole as acceptor, namely, 4,4′‐(naphtho[2,3‐c][1,2,5]thiadiazole‐4,9‐diyl)bis(N,N ‐diphenylaniline) (NZ2TPA), is designed and synthesized. The photophysical study and density functional theory analysis reveal that the emission of the compound has obvious hybridized local and charge‐transfer (HLCT) state feature. In addition, the compound shows aggregation‐induced emission (AIE) characteristic. Attributed to its HLCT mechanism and AIE characteristic, NZ2TPA acquires an unprecedentedly high photoluminescent quantum yield of 60% in the neat film, which is the highest among the reported organic small‐molecule NIR emitters and even exceeds most phosphorescent NIR materials. The nondoped devices based on NZ2TPA exhibit excellent performance, achieving a maximum external quantum efficiency (EQE) of 3.9% with the emission peak at 696 nm and a high luminance of 6330 cd m^?2, which are among the highest in the reported nondoped NIR fluorescent OLEDs. Moreover, the device remains a high EQE of 2.8% at high brightness of 1000 cd m^?2, with very low efficiency roll‐off.     

White Organic LED with a Luminous Efficacy Exceeding 100 lm W−1 without Light Out‐Coupling Enhancement Techniques

Luminous efficacy (LE), which is given by the ratio of luminous flux to power, is commonly used to measure the power consumption of a light source. Unfortunately, the LE of white organic light‐emitting diodes (OLEDs) still lags behind those of inorganic LED for practically used (>100 lm W^?1). In this paper, an ultraefficient white OLED is discussed based on a newly designed thermally activated delayed fluorescent exciplex host. The resulting white OLED delivers an unusually high forward‐viewing LE of 105.0 lm W^?1 and external quantum efficiency (EQE) η_ext of ≈30% (without using any optical out‐coupling techniques). As far as it is known, specifically, these efficiencies are the highest values among the published white OLEDs to date. Two‐color warm white emission is realized with Commission International de I'Eclairage coordinates of (0.40, 0.48) at a brightness of 1000 cd m^?2. Furthermore, the well‐matched energy alignment endows the device with an extremely low turn‐on voltage (≈2.5 V). Such high efficiencies and excellent device performance should benefit from the advantages of exciplex material solely used as the host. Therefore, this study anticipates that the findings have great potential to boost the LE of OLEDs, and more importantly, fulfill the power efficacy requirement for lighting applications.