White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

m‐Indolocarbazole Derivative as a Universal Host Material for RGB and White Phosphorescent OLEDs

The host materials designed for highly efficient white phosphorescent organic light‐emitting diodes (PhOLEDs) with power efficiency (PE) >50 lm W^‐1 and low efficiency roll‐off are very rare. In this work, three new indolocarbazole‐based materials (ICDP, 4ICPPy, and 4ICDPy) are presented composed of 6,7‐dimethylindolo[3,2‐a]carbazole and phenyl or 4‐pyridyl group for hosting blue, green, and red phosphors. Among this three host materials, 4ICDPy‐based devices reveal the best electroluminescent performance with maximum external quantum efficiencies (EQEs) of 22.1%, 27.0%, and 25.3% for blue (FIrpic), green (fac‐Ir(ppy)₃), and red ((piq)₂Ir(acac)) PhOLEDs. A two‐color and single‐emitting‐layer white organic light‐emitting diode hosted by 4ICDPy with FIrpic and Ir(pq)₃ as dopants achieves high EQE of 20.3% and PE of 50.9 lm W^?1 with good color stability; this performance is among the best for a single‐emitting‐layer white PhOLEDs. All 4ICDPy‐based devices show low efficiency roll‐off probably due to the excellent balanced carrier transport arisen from the bipolar character of 4ICDPy.     

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission‐Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) for blue emission and bis(2‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐1‐phenyl‐1H‐benzoimidazol‐N,C³)iridium(acetylacetonate) ((fbi)₂Ir(acac)) for orange emission, into a single‐energy well‐like emissive layer, an extremely high‐efficiency white organic light‐emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward‐viewing power efficiency of 42.5 lm W^?1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A^?1. Systematic studies of the dopants, host and dopant‐doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density–voltage characteristics, and temperature‐dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of FIrpic and (fbi)₂Ir(acac) are, respectively, host–guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses. It is noteworthy that the introduction of the multifunctional orange dopant (fbi)₂Ir(acac) (serving as either hole‐trapping site or electron‐transporting channel) is essential to this concept as it can make an improved charge balance and broaden the recombination zone. Based on this unique working model, detailed studies of the slight color‐shift in this WOLED are performed. It is quantitatively proven that the competition between hole trapping on orange‐dopant sites and undisturbed hole transport across the emissive layer is the actual reason. Furthermore, a calculation of the fraction of trapped holes on (fbi)₂Ir(acac) sites with voltage shows that the hole‐trapping effect of the orange dopant is decreased with increasing drive voltage, leading to a reduction of orange emission.     

High Performance Polymer Electrophosphorescent Devices with tert‐Butyl Group Modified Iridium Complexes as Emitters

The synthesis and photophysical study of two novel tert‐butyl modified cyclometalated iridium(III) complexes, i.e., bis(4‐tert‐butyl‐2‐phenylbenzothiozolato‐N,C^2′) iridium(III)(acetylacetonate) [(tbt)₂Ir(acac)] and bis(4‐tert‐butyl‐1‐phenyl‐1H‐benzimidazolato‐N,C^2′) iridium(III)(acetylacetonate) [(tpbi)₂Ir(acac)], are reported, their molecular structures were characterized by ¹³C NMR, ¹H NMR, ESI‐MS, FT‐IR, and elementary analysis. Compared with their prototypes without tert‐butyl substituents [(bt)₂Ir(acac) and (pbi)₂Ir(acac)], (tbt)₂Ir(acac) and (tpbi)₂Ir(acac) both have shortened phosphorescent lifetimes[(tbt)₂Ir(acac) versus (bt)₂Ir(acac), 1.1 μs:1.8 μs; (pbi)₂Ir(acac) versus (tpbi)₂Ir(acac), 0.8 μs:1.82 μs]. Moreover, (tbt)₂Ir(acac) has much more improved phototoluminescence quantum efficiencies in CH₂Cl₂ solution, [(tbt)₂Ir(acac), 0.51; (bt)₂Ir(acac), 0.26]. Employing them as dopants, high performance double‐layer PLEDs were fabricated. The (tbt)₂Ir(acac)‐based and (tpbi)₂Ir(acac)‐based PLEDs have the maximum external quantum efficiencies of 8.71 % and 10.25 %, respectively, and high EL quantum efficiencies of 5.92 % and 7.21 % can be achieved under high driven current density of 100 mA cm^–2. PLEDs fabricated with both the two phosphors have much broadened EL spectra with FWHM of > 110 nm, which afford the feasibility to be used as dopants in white LEDs, and the best doping concentrations of the two complexes in fabrication of PLEDs were optimized.     

A Novel Fluorene‐Triphenylamine Hybrid That is a Highly Efficient Host Material for Blue‐, Green‐, and Red‐Light‐Emitting Electrophosphorescent Devices

TFTPA (tris[4‐(9‐phenylfluoren‐9‐yl)phenyl]amine), a novel host material that contains a triphenylamine core and three 9‐phenyl‐9‐fluorenyl peripheries, was effectively synthesized through a Friedel‐Crafts‐type substitution reaction. Owing to the presence of its sterically bulky 9‐phenyl‐9‐fluorenyl groups, TFTPA exhibits a high glass transition temperature (186 °C) and is morphologically and electrochemically stable. In addition, as demonstrated from atomic force microscopy measurements, the aggregation of the triplet iridium dopant is significantly diminished in the TFTPA host, resulting in a highly efficient full‐color phosphorescence. The performance of TFTPA ‐based devices is far superior to those of the corresponding mCP‐ or CBP‐based devices, particularly in blue‐ and red‐emitting electrophosphorescent device systems. The efficiency of the FIrpic‐based blue‐emitting device reached 12 % (26 cd A^–1) and 18 lm W^–1 at a practical brightness of 100 cd m^–2; the Ir(piq)₂acac‐based red‐emitting device exhibited an extremely low turn‐on voltage (2.6 V) and a threefold enhancement in device efficiency (9.0 lm W^–1) relative to those of reference devices based on the CBP host material.     

1,2-diphenylbenzimidazole-triarylamine hybrided bipolar host materials employing fluorene as bridge for RYB and white electrophosphorescent devices

Four novel bipolar hosts (DTAFNBI, m-DTAFNBI, DTAFCBI and m-DTAFCBI) comprising a hole-transport ditolylphenylamino donor and an electron-transport 1,2-diphenylbenzimidazole acceptor connected via a fluorene spacer were synthesized and characterized. Through the different linkage topologies of phenylbenzimidazole, the thermal, photophysical, and electrochemical properties can be fine-tuned. The saturated fluorene spacer along with the ditolylphenylamino donor and the phenylbenzimidazole acceptor endowed high triplet energies (E_T = 2.47–2.62 eV, recorded in neat film at 20 K) and bipolar transporting abilities. Furthermore, the tetragonal geometry given by the sp³-hybridized C9 of fluorene encumbered intermolecular packing and led to excellent thermal and morphological stabilities (T_d = 379–392 °C, corresponding 5% weight loss; T_g = 148–162 °C). As a result, these bipolar materials were utilized as universal hosts for red, yellow, and blue (RYB) phosphorescent OLEDs, showing maximum external quantum efficiencies (η_ext) of 9.6%, 14.7%, and 18.9% for blue (FIrpic), yellow (m-(Tpm)₂Ir(acac) and red [Os(bpftz)₂(PPhMe₂)₂, OS1], respectively. In addition, white organic light-emitting diodes combining a blue emitter (FIrpic) and yellow emitter m-(Tpm)₂Ir(acac) and a red emitter (OS1) within a single emitting layer were also fabricated which also exhibited good efficiencies (9.5–13.7%, 15.1–23.5 cd A⁻¹, 13.3–23.9 lm W⁻¹) with relatively low efficiency roll off.     

A Bipolar Host Material Containing Triphenylamine and Diphenylphosphoryl‐Substituted Fluorene Units for Highly Efficient Blue Electrophosphorescence

Highly efficient blue electrophosphorescent organic light‐emitting diodes incorporating a bipolar host, 2,7‐bis(diphenylphosphoryl)‐9‐[4‐(N,N‐diphenylamino)phenyl]‐9‐phenylfluorene (POAPF), doped with a conventional blue triplet emitter, iridium(III) bis[(4,6‐difluoro‐phenyl)pyridinato‐N,C^2´]picolinate (FIrpic) are fabricated. The molecular architecture of POAPF features an electron‐donating (p‐type) triphenylamine group and an electron‐accepting (n‐type) 2,7‐bis(diphenyl‐phosphoryl)fluorene segment linked through the sp³‐hybridized C9 position of the fluorene unit. The lack of conjugation between these p‐ and n‐type groups endows POAPF with a triplet energy gap (E_T) of 2.75 eV, which is sufficiently high to confine the triplet excitons on the blue‐emitting guest. In addition, the built‐in bipolar functionality facilitates both electron and hole injection. As a result, a POAPF‐based device doped with 7 wt% FIrpic exhibits a very low turn‐on voltage (2.5 V) and high electroluminescence efficiencies (20.6% and 36.7 lm W^?1). Even at the practical brightnesses of 100 and 1000 cd m^?2, the efficiencies remain high (20.2%/33.8 lm W^?1 and 18.8%/24.3 lm W^?1, respectively), making POAPF a promising material for use in low‐power‐consumption devices for next‐generation flat‐panel displays and light sources.     

Functionalized terfluorene for solution-processed high efficiency blue fluorescence OLED and electrophosphorescent devices

A new multifunctional blue-emitting terfluorene derivative (TFDPA) featured with triphenylamine groups for hole-transportation and long alkyl chains for solution processability on the conjugation inert bridge centers was reported. TFDPA can give homogeneous thin film by solution process and exhibits high hole mobility (μ_h ≈ 10^?3 cm² V^?1 s^?1) and suitable HOMO for hole injection. Particularly, TFDPA performs efficient deep-blue emission with high quantum yield (～100% in solution, 43% in thin film) and suitable triplet energy (E_T = 2.28 eV), making solution-processed OLED devices of using TFDPA as blue emitter and as host for iridium-containing phosphorescent dopants feasible. The solution-processed nondoped blue OLED device gives saturated deep-blue electroluminescence [CIE = (0.17, 0.07)] with EQE of 2.7%. TFDPA-hosted electrophosphorescent devices performed with EQE of 6.5% for yellow [(Bt)₂Ir(acac)], 9.3% of orange [Ir(2–phq)₃], and 6.9% of red [(Mpq)₂Ir(acac)], respectively. In addition, with careful control on the doping concentration of [(Bt)₂Ir(acac)], a solution-processed fluorescence–phosphorescence hybrided two-color-based WOLED with EQE of 3.6% and CIE coordinate of (0.38, 0.33) was successfully achieved.     

Multifunctional Triphenylamine/Oxadiazole Hybrid as Host and Exciton‐Blocking Material: High Efficiency Green Phosphorescent OLEDs Using Easily Available and Common Materials

A new triphenylamine/oxadiazole hybrid, namely m‐TPA‐o‐OXD, formed by connecting the meta‐position of a phenyl ring in triphenylamine with the ortho‐position of 2,5‐biphenyl‐1,3,4‐oxadiazole, is designed and synthesized. The new bipolar compound is applicable in the phosphorescent organic light‐emitting diodes (PHOLEDs) as both host and exciton‐blocking material. By using the new material and the optimization of the device structures, very high efficiency green and yellow electrophosphorescence are achieved. For example, by introducing 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene (TPBI) to replace 2, 9‐dimethyl‐4,7‐diphenyl‐1, 10‐phenanthroline (BCP)/tris(8‐hydroxyquinoline)aluminium (Alq₃) as hole blocking/electron transporting layer, followed by tuning the thicknesses of hole‐transport 1, 4‐bis[(1‐naphthylphenyl)amino]biphenyl (NPB) layer to manipulate the charge balance, a maximum external quantum efficiency (η_EQE,max) of 23.0% and a maximum power efficiency (η_p,max) of 94.3 lm W⁻¹ are attained for (ppy)₂Ir(acac) based green electrophosphorescence. Subsequently, by inserting a thin layer of m‐TPA‐o‐OXD as self triplet exciton block layer between hole‐transport and emissive layer to confine triplet excitons, a η_EQE,max of 23.7% and η_p,max of 105 lm W⁻¹ are achieved. This is the highest efficiency ever reported for (ppy)₂Ir(acac) based green PHOLEDs. Furthermore, the new host m‐TPA‐o‐OXD is also applicable for other phosphorescent emitters, such as green‐emissive Ir(ppy)₃ and yellow‐emissive (fbi)₂Ir(acac). A yellow electrophosphorescent device with η_EQE,max of 20.6%, η_c,max of 62.1 cd A⁻¹, and η_p,max of 61.7 lm W⁻¹, is fabricated. To the author’s knowledge, this is also the highest efficiency ever reported for yellow PHOLEDs.     

Synthesis and Characterization of Red‐Emitting Iridium(III) Complexes for Solution‐Processable Phosphorescent Organic Light‐Emitting Diodes

A new series of highly efficient red‐emitting phosphorescent Ir(III) complexes, (Et‐CVz‐PhQ)₂Ir(pic‐N‐O), (Et‐CVz‐PhQ)₂Ir(pic), (Et‐CVz‐PhQ)₂Ir(acac), (EO‐CVz‐PhQ)₂Ir(pic‐N‐O), (EO‐CVz‐PhQ)₂Ir(pic), and (EO‐CVz‐PhQ)₂Ir(acac), based on carbazole (CVz)‐phenylquinoline (PhQ) main ligands and picolinic acid N‐oxide (pic‐N‐O), picolinic acid (pic), and acetylacetone (acac) ancillary ligands, are synthesized for phosphorescent organic light‐emitting diodes (PhOLEDs), and their photophysical, electrochemical, and electroluminescent (EL) properties are investigated. All of the Ir(III) complexes have high thermal stability and emit an intense red light with an excellent color purity at CIE coordinates of (0.65,0.34). Remarkably, high‐performance solution‐processable PhOLEDs were fabricated using Ir(III) complexes with a pic‐N‐O ancillary ligand with a maximum external quantum efficiency (5.53%) and luminance efficiency (8.89 cd A^?1). The novel use of pic‐N‐O ancillary ligand in the synthesis of phosphorescent materials is reported. The performance of PhOLEDs using these Ir(III) complexes correlates well with the results of density functional theory calculations.     

Highly Efficient Red Phosphorescent OLEDs based on Non‐Conjugated Silicon‐Cored Spirobifluorene Derivative Doped with Ir‐Complexes

A novel host material containing silicon‐cored spirobifluorene derivative (SBP‐TS‐PSB), is designed, synthesized, and characterized for red phosphorescent organic light‐emitting diodes (OLEDs). The SBP‐TS‐PSB has excellent thermal and morphological stabilities and exhibits high electroluminescence (EL) efficiency as a host for the red phosphorescent OLEDs. The electrophosphorescence properties of the devices using SBP‐TS‐PSB as the host and red phosphorescent iridium (III) complexes as the emitter are investigated and these devices exhibit higher EL performances compared with the reference devices with 4,4′‐N,N′‐dicarbazole‐biphenyl (CBP) as a host material; for example, a (piq)₂Ir(acac)‐doped SBP‐TS‐PSB device shows maximum external quantum efficiency of η_ext = 14.6%, power efficiency of 10.3 lm W^?1 and Commission International de L'Eclairage color coordinates (0.68, 0.32) at J = 1.5 mA cm^?2, while the device with the CBP host shows maximum η_ext = 12.1%. These high performances can be mainly explained by efficient triplet energy transfer from the host to the guests and improved charge balance attributable to the bipolar characteristics of the spirobifluorene group.     

Carbazole-bridged triphenylamine-bipyridine bipolar hosts for high-efficiency low roll-off multi-color PhOLEDs

Three new bipolar molecules composed of carbazole, triarylamine, and bipyridine were synthesized and utilized as host materials in multi-color phosphorescent OLEDs (PhOLEDs). These carbazole-based materials comprise a hole-transport triarylamine at C3 and an electron-transport 2,4′- or 4,4′-bipyridine at N9. The different bipyridine isomers and linking topology of the bipyridine with respect to carbazole N9 not only allows fine-tuning of physical properties but also imparts conformational change which subsequently affects molecular packing and carrier transport properties in the solid state. PhOLEDs were fabricated using green [(ppy)₂Ir(acac)], yellow [(bt)₂Ir(acac)], and red [(mpq)₂Ir(acac)] as doped emitters, which showed low driving voltage, high external quantum efficiency (EQE), and extremely low efficiency roll-off. Among these new bipolar materials, the 2Cz-44Bpy-hosted device doping with 10% (ppy)₂Ir(acac) as green emitting layer showed a high EQE of 22% (79.8 cd A⁻¹) and power efficiency (PE) of 102.5 lm W⁻¹ at a practical brightness of 100 cd m⁻². In addition, the device showed limited efficiency roll-off (21.6% EQE) and low driving voltage (2.8 V) at a practical brightness of 1000 cd m⁻².     

Blue‐Emitting Cationic Iridium Complexes with 2‐(1H‐Pyrazol‐1‐yl)pyridine as the Ancillary Ligand for Efficient Light‐Emitting Electrochemical Cells

Two blue‐emitting cationic iridium complexes with 2‐(1H‐pyrazol‐1‐yl)pyridine (pzpy) as the ancillary ligands, namely, [Ir(ppy)₂(pzpy)]PF₆ and [Ir(dfppy)₂(pzpy)]PF₆ (ppy is 2‐phenylpyridine, dfppy is 2‐(2,4‐difluorophenyl) pyridine, and PF₆^? is hexafluorophosphate), have been prepared, and their photophysical and electrochemical properties have been investigated. In CH₃CN solutions, [Ir(ppy)₂(pzpy)]PF₆ emits blue‐green light (475 nm), which is blue‐shifted by more than 100 nm with respect to the typical cationic iridium complex [Ir(ppy)₂(dtb‐bpy)]PF₆ (dtb‐bpy is 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine); [Ir(dfppy)₂(pzpy)]PF₆ with fluorine‐substituted cyclometalated ligands shows further blue‐shifted light emission (451 nm). Quantum chemical calculations reveal that the emissions are mainly from the ligand‐centered ³π–π* states of the cyclometalated ligands (ppy or dfppy). Light‐emitting electrochemical cells (LECs) based on [Ir(ppy)₂(pzpy)]PF₆ gave green‐blue electroluminescence (486 nm) and had a relatively high efficiency of 4.3 cd A^?1 when an ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate was added into the light‐emitting layer. LECs based on [Ir(dfppy)₂(pzpy)]PF₆ gave blue electroluminescence (460 nm) with CIE (Commission Internationale de L'Eclairage) coordinates of (0.20, 0.28), which is the bluest light emission for iTMCs‐based LECs reported so far. Our work suggests that using diimine ancillary ligands involving electron‐donating nitrogen atoms (like pzpy) is an efficient strategy to turn the light emission of cationic iridium complexes to the blue region.     

A Multifunctional Bipolar Luminogen with Delayed Fluorescence for High‐Performance Monochromatic and Color‐Stable Warm‐White OLEDs

Increasing exciton utilization and reducing exciton annihilation are crucial to achieve high performance of organic light‐emitting diodes (OLEDs), which greatly depend on molecular engineering of emitters and hosts. A novel luminogen (SBF‐BP‐DMAC) is synthesized and characterized. Its crystal and electronic structures, thermal stability, electrochemical behavior, carrier transport, photoluminescence, and electroluminescence are investigated. SBF‐BP‐DMAC exhibits enhanced photoluminescence and promotes delayed fluorescence in solid state and bipolar carrier transport ability, and thus holds multifunctionality of emitter and host for OLEDs. Using SBF‐BP‐DMAC as an emitter, the nondoped OLEDs exhibit maximum electroluminescence (EL) efficiencies of 67.2 cd A^?1, 65.9 lm W^?1, and 20.1%, and the doped OLEDs provide maximum EL efficiencies of 79.1 cd A^?1, 70.7 lm W^?1, and 24.5%. A representative orange phosphor, Ir(tptpy)₂acac, is doped into SBF‐BP‐DMAC for OLED fabrication, giving rise to superior EL efficiencies of 88.0 cd A^?1, 108.0 lm W^?1, and 26.8% for orange phosphorescent OLEDs, and forward‐viewing EL efficiencies of 69.3 cd A^?1, 45.8 lm W^?1, and 21.0% for two‐color hybrid warm‐white OLEDs. All of these OLEDs can retain high EL efficiencies at high luminance, with very small efficiency roll‐offs. The outstanding EL performance demonstrates the great potentials of SBF‐BP‐DMAC in practical display and lighting devices.     

Efficient Bipolar Blue AIEgens for High‐Performance Nondoped Blue OLEDs and Hybrid White OLEDs

Blue organic luminescent materials play a crucial role in full‐color display and white lighting but efficient ones meeting commercial demands are very rare. Herein, the design and synthesis of tailor‐made bipolar blue luminogens with an anthracene core and various functional groups are reported. The thermal stabilities, photophysical properties, electronic structures, electrochemical behaviors, carrier transport abilities, and electroluminescence performances are systematically investigated. The luminogen TPE‐TAPBI containing a tetraphenylethene moiety shows aggregation‐induced emission, while another luminogen TriPE‐TAPBI bearing a triphenylethene unit exhibits light aggregation‐caused quenching. In comparison with TriPE‐TAPBI, TPE‐TAPBI has stronger blue emission in neat film and functions more efficiently in nondoped organic light‐emitting diodes (OLEDs). High maxima current, power, and external quantum efficiencies of 7.21 cd A^?1, 6.78 lm W^?1, and 5.73%, respectively, are attained by the nondoped blue OLED of TPE‐TAPBI (CIE_x,y = 0.15, 0.16). Moreover, efficient two‐color hybrid warm white OLEDs (CIE_x,y = 0.457, 0.470) are achieved using TPE‐TAPBI neat film as the blue‐emitting component, which provide total current, power, external quantum efficiencies of up to 70.5 lm W^?1, 76.0 cd A^?1, and 28% at 1000 cd m^?2, respectively. These blue and white OLEDs are among the most efficient devices with similar colors in the literature.     

Deep‐Blue Phosphorescent Ir(III) Complexes with Light‐Harvesting Functional Moieties for Efficient Blue and White PhOLEDs in Solution‐Process

The photoluminescence (PL) efficiency of emitters is a key parameter to accomplish high electroluminescent performance in phosphorescent organic light‐emitting diodes (PhOLEDs). With the aim of enhancing the PL efficiency, this study designs deep‐blue emitting heteroleptic Ir(III) complexes (tBuCN‐FIrpic, tBuCN‐FIrpic‐OXD, and tBuCN‐FIrpic‐mCP) for solution‐processed PhOLEDs by covalently attaching the light‐harvesting functional moieties (mCP‐Me or OXD‐Me) to the control Ir(III) complex, tBuCN‐FIrpic. These Ir(III) complexes show similar deep‐blue emission peaks around 453, 480 nm (298 K) and 447, 477 nm (77 K) in chloroform. tBuCN‐FIrpic‐mCP demonstrates higher light‐harvesting efficiency (142%) than tBuCN‐FIrpic‐OXD (112%), relative to that of tBuCN‐FIrpic (100%), due to an efficient intramolecular energy transfer from the mCP group to the Ir(III) complex. Accordingly, the monochromatic PhOLEDs of tBuCN‐FIrpic‐mCP show higher external quantum efficiency (EQE) of 18.2% with one of the best blue coordinates (0.14, 0.18) in solution‐processing technology. Additionally, the two‐component (deep‐blue:yellow‐orange), single emitting layer, white PhOLED of tBuCN‐FIrpic‐mCP shows a maximum EQE of 20.6% and superior color quality (color rendering index (CRI) = 78, Commission Internationale de L'Eclairage (CIE) coordinates of (0.353, 0.352)) compared with the control device containing sky‐blue:yellow‐orange emitters (CRI = 60, CIE coordinates of (0.293, 0.395)) due to the good spectral coverage by the deep‐blue emitter.     

Unprecedented Homoleptic Bis‐Tridentate Iridium(III) Phosphors: Facile,Scaled‐Up Production,and Superior Chemical Stability

Bis‐tridentate Ir(III) metal complexes are expected to show great potential in organic light‐emitting diode (OLED) applications due to the anticipated, superb chemical and photochemical stability. Unfortunately, their exploitation has long been hampered by lack of adequate methodology and with inferior synthetic yields. This hurdle can be overcome by design of the first homoleptic, bis‐tridentate Ir(III) complex [Ir(pzpyph)(pz^Hpyph)] ( 1 ), for which the abbreviation (pzpyph)H (or pz^Hpyph) stands for the parent 2‐pyrazolyl‐6‐phenyl pyridine chelate. After that, methylation and double methylation of 1 afford the charge‐neutral Ir(III) complex [Ir(pzpyph)(pz^Mepyph)] ( 2 ) and cationic complex [Ir(pz^Mepyph)₂][PF₆] ( 3 ), while deprotonation of 1 gives formation of anionic [Ir(pzpyph)₂][NBu₄] ( 4 ), all in high yields. These bis‐tridentate Ir(III) complexes 2 – 4 are highly emitted in solution and solid states, while the charge‐neutral 2 and corresponding t ‐butyl substituted derivative [Ir(pzpy^Buph)(pz^Mepy^Buph)] ( 5 ) exhibit superior photostability versus the tris‐bidentate references [Ir(ppy)₂(acac)] and [Ir(ppy)₃] in toluene under argon, making them ideal OLED emitters. For the track record, phosphor 5 gives very small efficiency roll‐off and excellent overall efficiencies of 20.7%, 66.8 cd A^?1, and 52.8 lm W^?1 at high brightness of 1000 cd m^?2. These results are expected to inspire further studies on the bis‐tridentate Ir(III) complexes, which are judged to be more stable than their tris‐bidentate counterparts from the entropic point of view.     

Charge conduction study of phosphorescent iridium compounds for organic light-emitting diodes application

The charge conduction properties of a series of iridium-based compounds for phosphorescent organic light-emitting diodes (OLEDs) have been investigated by thin-film transistor (TFT) technique. These compounds include four homoleptic compounds: Ir(ppy)₃, Ir(piq)₃, Ir(Tpa-py)₃, Ir(Cz-py)₃, and two heteroleptic compounds Ir(Cz-py)₂(acac) and FIrpic. Ir(ppy)₃, Ir(piq)₃ and FIrpic are commercially available compounds, while Ir(Tpa-py)₃, Ir(Cz-py)₃ and Ir(Cz-py)₂(acac) are specially designed to test their conductivities with respect to the commercial compounds. In neat films, with the exception of FIrpic, all Ir-compounds possess significant hole transporting capabilities, with hole mobilities in the range of about 5 × 10⁻⁶–2 × 10⁻⁵ cm² V⁻¹ s⁻¹. FIrpic, however, is non-conducting as revealed by TFT measurements. We further investigate how Ir-compounds modify carrier transport as dopants when they are doped into a phosphorescent host material CBP. The commercial compounds are chosen for the investigation. Small amounts of Ir(ppy)₃ and Ir(piq)₃ (<10%) behave as hole traps when they are doped into CBP. The hole conduction of the doped CBP films can be reduced by as much as 4 orders of magnitude. Percolating conduction of Ir-compounds occurs when the doping concentrations of the Ir-compounds exceed 10%, and the hole mobilities gradually increase as their values reach those of the neat Ir films. In contrast to Ir(ppy)₃ and Ir(piq)₃, FIrpic does not participate in hole conduction when it is doped into CBP. The hole mobility decreases monotonically as the concentration of FIrpic increases due to the increase of the average charge hopping distance in CBP.     

High Efficiency White Organic Light‐Emitting Devices Incorporating Yellow Phosphorescent Platinum(II) Complex and Composite Blue Host

A new class of charge neutral, strongly luminescent cyclometalated platinum(II) complexes supported by dianionic tetradentate ligand are synthesized. One of these platinum(II) complexes, Y‐Pt , displays a high photoluminescence quantum yield of 86% and electroluminescence efficacy (η_power) of up to 52 lm W^?1, and is utilized as a yellow phosphorescent dopant in the fabrication of white organic light‐emitting devices (WOLEDs). WOLEDs based on conventional structures with yellow emission from Y‐Pt in combination with blue emission from bis(4,6‐difluorophenyl‐pyridinato‐N,C²′) (picolinate) iridium(III) (FIrpic) show a total η_power of up to 31 lm W^?1. A two‐fold increase in η_power by utilizing a modified WOLED structure comprising of a composite blue host is realized. With this modified device structure, the total η_power and driving voltage at a luminance of 1000 cd m^?2 can be improved to 61 lm W^?1 and 7.5 V (i.e., 10 V for control devices). The performance improvement is attributed to an effectively broaden exciton formation‐recombination zone and alleviation of localized exciton accumulation within the FIrpic‐doped composite host for reduced triplet‐triplet annihilation, yielding blue light‐emission with enhanced intensity. The modified device structure can also adopt a higher concentration of Y‐Pt towards its optimal value, leading to WOLEDs with high efficiency.     

Solution processed single-emissive-layer white organic light-emitting diodes based on fluorene host: Balanced consideration for color quality and electroluminescent efficiency

Cost-effective fabrication of white organic light-emitting diodes (WOLED) is meaningful toward commercial application of environment-friendly solid-state lighting sources. Electroluminescent efficiency and color quality are two opposite performance characteristics facing solution processed WOLEDs requiring balanced consideration. Herein, a recently synthesized molecule of 4,4’-(9,9’-(1,3-phenylene)bis(9H-fluorene-9,9-diyl))bis(N,N-diphenylaniline) (DTPAFB) is introduced as a host material for solution processed all-phosphor WOLEDs, embracing four well-known molecules which are blue iridium (III) bis(2-(4,6-difluorophenyl)pyridinato-N,C²)(picolinate) (FIrpic), green iridium (III) bis[2-(2-pyridinyl-N)phenyl-C](2,4-pentanedionato-O²,O⁴) [Ir(ppy)₂(acac)], and orange iridium (III) bis(2-phenyl-benzothiazole-C²,N)(acetylacetonate) [Ir(bt)₂(acac)] plus a home-made red phosphor of iridium (III) tris(1-(2,6-dimethylphenoxy)-4-(4-chlorophenyl)phthalazine) [Ir(MPCPPZ)₃]. Illumination quality white light with high brightness, high efficiency, suitable correlated color temperature (CCT), high color-rendering index (CRI), and stable electroluminescent (EL) emission is obtained. A stable white emission with a CRI over 70, Commission Internationale de L'Eclairage (CIE) of (0.37, 0.42), and high EL efficiency of 19.6 lm W⁻¹ at high luminance of 2000 cd m⁻² for blue/orange complementary color WOLEDs is demonstrated. The optimized red/green/blue three primary color WOLEDs show improved CRI up to 81, moderate high efficiency of 25.8 cd A⁻¹, 14.4 lm W⁻¹, and EQE of 13.9%. Furthermore, the red/green/blue/orange four primary color WOLEDs show the optional balance between color quality and EL efficiency with high CRI of around 81–83 and medium CCT of 3755–3929 K which is warm and soft to human eyes. At an illumination relevant luminance of 1000 cd m⁻², the total power efficiency reaches 33.6 lm W⁻¹, and still remains 30.2 lm W⁻¹ at 3000 cd m⁻², approaching the efficiency of state-of-the-art fluorescent-tube (40–70 lm W⁻¹), potentially suitable as an environment-friendly solid-state lighting source. This work indicates that developing high performance host materials and highly efficient phosphors and carefully combining them with common phosphors is an effective way toward high performance WOLEDs.