Trichlorosilanes as Anchoring Groups for Phenylene‐Thiophene Molecular Monolayer Field Effect Transistors

Self assembled monolayer field effect transistors (SAMFETs) are reported using a phenylene‐thiophene containing semiconducting mesogen attached through a trichlorosilane anchoring group. Monolayer films, covalently attached to silicon dioxide substrates, form in less than 10 h from solution, thanks to the accelerated reaction of the trichlorosilane anchor. Devices exhibit mobilities as high as 1.7 × 10^?2 cm² V^?1 s^?1, currents of up to 15 μA (on/off current ratio of 10⁶) with device yields close to unity over large areas for channel lengths up to 100 μm.     

Enhanced Performance of Self‐Assembled Monolayer Field‐Effect Transistors with Top‐Contact Geometry through Molecular Tailoring,Heated Assembly,and Thermal Annealing

Low‐voltage self‐assembled monolayer field‐effect transistors (SAMFETs) that operate under an applied bias of less than ?3 V and a high hole mobility of 10^?2 cm² V^?1 s^?1 are reported. A self‐assembled monolayer (SAM) with a quaterthiophene semiconducting core and a phosphonic acid binding group is used to fabricate SAMFETs on both high‐voltage (AlO_x/300 nm SiO₂) and low‐voltage (HfO₂) dielectric platforms. High performance is achieved through enhanced SAM packing density via a heated assembly process and through improved electrical contact between SAM semiconductor and metal electrodes. Enhanced electrical contact is obtained by utilizing a functional methylthio head group combined with thermal annealing post gold source/drain electrode deposition to facilitate the interaction between SAM and electrode.     

Electrolyte‐Gated n‐Type Transistors Produced from Aqueous Inks of WS2 Nanosheets

Solution‐processed, low cost thin films of layered semiconductors such as transition metal dichalcogenides (TMDs) are potential candidates for future printed electronics. Here, n‐type electrolyte‐gated transistors (EGTs) based on porous WS₂ nanosheet networks as the semiconductor are demonstrated. The WS₂ nanosheets are liquid phase exfoliated to form aqueous/surfactant stabilized inks, and deposited at low temperatures (T < 120 °C) in ambient atmosphere by airbrushing. No solvent exchange, further additives, or complicated processing steps are required. While the EGTs are primarily n‐type (electron accumulation), some hole transport is also observable. The EGTs show current modulations > 10⁴ with low hysteresis, channel width‐normalized on‐conductances of up to 0.27 µS µm^?1 and estimated electron mobilities around 0.01 cm² V^?1 s^?1. In addition, the WS₂ nanosheet networks exhibit relatively high volumetric capacitance values of 30 F cm^?3. Charge transport within the network depends significantly on the applied lateral electric field and is thermally activated, which supports the notion that hopping between nanosheets is a major limiting factor for these networks and their future application.     

High‐Performance,Low‐Operating‐Voltage Organic Field‐Effect Transistors with Low Pinch‐Off Voltages

Organic field‐effect transistors suffer from ultra‐high operating voltages in addition to their relative low mobility. A general approach to low‐operating‐voltage organic field‐effect transistors (OFETs) using donor/acceptor buffer layers is demonstrated. P‐type OFETs with acceptor molecule buffer layers show reduced operating voltages (from 60–100 V to 10–20 V), with mobility up to 0.19 cm² V^?1 s^?1 and an on/off ratio of 3 × 10⁶. The subthreshold slopes of the devices are greatly reduced from 5–12 V/decade to 1.68–3 V/decade. This favorable combination of properties means that such OFETs can be operated successfully at voltages below 20 V (|V_DS| ≤ 20 V, |V_GS| ≤ 20 V). This method also works for n‐type semiconductors. The reduced operating voltage and low pinch‐off voltage contribute to the improved ordering of the polycrystalline films, reduced grain boundary resistance, and steeper subthreshold slopes.     

Highly Sensitive Chemical‐Vapor Sensor Based on Thin‐Film Organic Field‐Effect Transistors with Benzothiadiazole‐Fused‐Tetrathiafulvalene

The synthesis of a new tetrathiafulvalene derivative with an electron‐withdrawing benzothiadiazole moiety and its use in thin‐film organic field‐effect transistors (OFETs) are reported. Compared to reported OFETs with other TTF derivatives, a high hole mobility up to 0.73 cm² V^?1 s^?1, low off‐current and high on/off ratio up to 10⁵ are demonstrated. In addition, the developed OFETs show fast responsiveness toward chemical vapors of DECP (diethyl chlorophosphate) or POCl₃ which are simulants of phosphate‐based nerve agents. In contrast to previously reported OFET‐based sensors, off‐current is used as the output signal, which increases quickly upon exposure to either DECP or POCl₃ vapors. High sensitivity is demonstrated toward DECP and POCl₃ vapors, with concentrations as low as 10 ppb being detected. These OFETs are also responsive to TNT vapor. The sensing mechanisms for the new type of OFET are discussed.     

Highly Stretchable,High‐Mobility,Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes

Highly stretchable, high‐mobility, and free‐standing coplanar‐type all‐organic transistors based on deformable solid‐state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i‐TPU), thereby showing high reliability under mechanical stimuli as well as low‐voltage operation. Unlike conventional ionic dielectrics, the i‐TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 µF cm^?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i‐TPU‐based organic transistors exhibit a mobility as high as 7.9 cm² V^?1 s^?1, high bendability (R_c, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low‐voltage operation (V_DS = ?1.0 V, V_GS = ?2.5 V). In addition, the electrical characteristics such as mobility, on‐current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free‐standing, fully stretchable, and semi‐transparent coplanar‐type all‐organic transistors can be fabricated by introducing a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low‐voltage operation (V_DS = ?1.5 V, V_GS = ?2.5 V) and an even higher mobility of up to 17.8 cm² V^?1 s^?1. Moreover, these devices withstand stretching up to 80% tensile strain.     

Printable Organic‐Inorganic Nanoscale Multilayer Gate Dielectrics for Thin‐Film Transistors Enabled by a Polymeric Organic Interlayer

Here, a new approach to the layer‐by‐layer solution‐processed fabrication of organic/inorganic hybrid self‐assembled nanodielectrics (SANDs) is reported and it is demonstrated that these ultrathin gate dielectric films can be printed. The organic SAND component, named P‐PAE, consists of polarizable π‐electron phosphonic acid‐based units bound to a polymeric backbone. Thus, the new polymeric SAND (PSAND) can be fabricated either by spin‐coating or blade‐coating in air, by alternating P‐PAE, a capping reagent layer, and an ultrathin ZrOx layer. The new PSANDs thickness vary from 6 to 15 nm depending on the number of organic‐ZrOx bilayers, exhibit tunable film thickness, well‐defined nanostructures, large electrical capacitance (up to 558 nF cm^?2), and good insulating properties (leakage current densities as low as 10^?6 A cm^?2). Organic thin‐film transistors that are fabricated with representative p‐/n‐type organic molecular/polymeric semiconducting materials, function well at low voltages (<3.0 V). Furthermore, flexible TFTs fabricated with PSAND exhibit excellent mechanical flexibility and good stress stability, offering a promising route to low operating voltage flexible electronics. Finally, printable PSANDs are also demonstrated and afford TFTs with electrical properties comparable to those achieved with the spin‐coated PSAND‐based devices.     

Reusable Cellulose‐Based Hydrogel Sticker Film Applied as Gate Dielectric in Paper Electrolyte‐Gated Transistors

A new concept for reusable eco‐friendly hydrogel electrolytes based on cellulose is introduced. The reported electrolytes are designed and engineered through a simple, fast, low‐cost, and eco‐friendly dissolution method of microcrystalline cellulose at low temperature using an aqueous LiOH/urea solvent system. The cellulose solution is combined with carboxymethyl cellulose, followed by the regeneration and simultaneous ion incorporation. The produced free standing cellulose‐based electrolyte films exhibit interesting properties for application in flexible electrochemical devices, such as biosensors or electrolyte‐gated transistors (EGTs), because of their high specific capacitances (4–5 µF cm^?2), transparency, and flexibility. Indium–gallium–zinc‐oxide EGTs on glass with laminated cellulose‐based hydrogel electrolytes (CHEs) as the gate dielectric are produced presenting a low working voltage (<2 V), showing an on–off current ratio (I _on/off) of 10⁶, a subthreshold swing lower than 0.2 V dec^?1, and saturation mobility (μ_Sat) reaching 26 cm² V^?1 s^?1. The flexible CHE‐gated transistors on paper are also demonstrated, which operate at switching frequencies up to 100 Hz. Combining the flexibility of the EGTs on paper with the reusability of the developed CHEs is a breakthrough toward biodegradable advanced functional materials allied with disposable/recyclable and low‐cost electronic devices.     

High‐Mobility n‐Type Organic Transistors Based on a Crystallized Diketopyrrolopyrrole Derivative

A new high‐performing small molecule n‐channel semiconductor based on diketopyrrolopyrrole (DPP), 2,2′‐(5,5′‐(2,5‐bis(2‐ethylhexyl)‐3,6‐dioxo‐2,3,5,6‐tetrahydropyrrolo[3,4‐c]pyrrole‐1,4‐diyl)bis(thiophene‐5,2‐diyl))bis(methan‐1‐yl‐1‐ylidene)dimalononitrile (DPP‐T‐DCV), is successfully synthesized. The frontier molecular orbitals in this designed structure are elaborately tuned by introducing a strong electron‐accepting functionality (dicyanovinyl). The well‐defined lamellar structures of the crystals display a uniform terrace step height corresponding to a molecular monolayer in the solid‐state. As a result of this tuning and the remarkable crystallinity derived from the conformational planarity, organic field‐effect transistors (OFETs) based on dense‐packed solution‐processed single‐crystals of DPP‐T‐DCV exhibit an electron mobility (μ_e) up to 0.96 cm² V^?1 s^?1, one of the highest values yet obtained for DPP derivative‐based n‐channel OFETs. Polycrystalline OFETs show promise (with an μ_e up to 0.64 cm² V^?1 s^?1) for practical utility in organic device applications.     

High‐Mobility Air‐Stable Naphthalene Diimide‐Based Copolymer Containing Extended π‐Conjugation for n‐Channel Organic Field Effect Transistors

A high‐performance naphthalene diimide (NDI)‐based conjugated polymer for use as the active layer of n‐channel organic field‐effect transistors (OFETs) is reported. The solution‐processable n‐channel polymer is systematically designed and synthesized with an alternating structure of long alkyl substituted‐NDI and thienylene–vinylene–thienylene units (PNDI‐TVT). The material has a well‐controlled molecular structure with an extended π‐conjugated backbone, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n‐type OFET. The top‐gate, bottom‐contact device shows remarkably high electron charge‐carrier mobility of up to 1.8 cm² V^?1 s^?1 (I_on/I_off = 10⁶) with the commonly used polymer dielectric, poly(methyl methacrylate) (PMMA). Moreover, PNDI‐TVT OFETs exhibit excellent air and operation stability. Such high device performance is attributed to improved π–π intermolecular interactions owing to the extended π‐conjugation, apart from the improved crystallinity and highly interdigitated lamellar structure caused by the extended π–π backbone and long alkyl groups.     

High‐Performance n‐ and p‐Type Field‐Effect Transistors Based on Hybridly Surface‐Passivated Colloidal PbS Nanosheets

Colloidally synthesized nanomaterials are among the promising candidates for future electronic devices due to their simplicity and the inexpensiveness of their production. Specifically, colloidal nanosheets are of great interest since they are conveniently producible through the colloidal approach while having the advantages of two‐dimensionality. In order to employ these materials, according transistor behavior should be adjustable and of high performance. It is shown that the transistor performance of colloidal lead sulfide nanosheets is tunable by altering the surface passivation, the contact metal, or by exposing them to air. It is found that adding halide ions to the synthesis leads to an improvement of the conductivity, the field‐effect mobility, and the on/off ratio of these transistors by passivating their surface defects. Superior n‐type behavior with a field‐effect mobility of 248 cm² V^?1 s^?1 and an on/off ratio of 4 × 10⁶ is achieved. The conductivity of these stripes can be changed from n‐type to p‐type by altering the contact metal and by adding oxygen to the working environment. As a possible solution for the post‐Moore era, realizing new high‐quality semiconductors such as colloidal materials is crucial. In this respect, the results can provide new insights which helps to accelerate their optimization for potential applications.     

n-Type self-assembled monolayer field-effect transistors for flexible organic electronics

Within this work we present n-type self-assembled monolayer field-effect transistors (SAMFETs) based on a novel perylene bisimide. The molecule spontaneously forms a covalently fixed monolayer on top of an aluminium oxide dielectric via a phosphonic acid anchor group. Detailed studies revealed an amorphous, two-dimensional semiconducting sheet on top of the dielectric. Reliable transistors with electron mobilities on the order of 10^?3 cm²/V s with limited hysteresis were achieved on rigid as well on flexible substrates. Furthermore, a flexible NMOS-bias inverter based on SAMFETs is demonstrated for the first time.     

Core Fluorination Enhances Solubility and Ambient Stability of an IDT‐Based n‐Type Semiconductor in Transistor Devices

The synthesis of a novel fluorinated n‐type small molecule based on an indacenodithiophene core is reported. Fluorination is found to have a significant impact on the physical properties, including a surprisingly dramatic improvement in solubility, in addition to effectively stabilizing the lowest‐unoccupied molecular orbital energy (?4.24 eV). Single‐crystal analysis and density functional theory calculations indicate the improved solubility can be attributed to backbone torsion resulting from the positioning of the fluorine group in close proximity to the strongly electron‐withdrawing dicyanomethylene group. Organic thin‐film transistors made via blade coating display high electron mobility (up to 0.49 cm² V^?1 s^?1) along with good retention of performance in ambient conditions.     

Boosting the Charge Transport Property of Indeno[1,2‐b]fluorene‐6,12‐dione though Incorporation of Sulfur‐ or Nitrogen‐Linked Side Chains

Alkyl chains are basic units in the design of organic semiconductors for purposes of enhancing solubility, tuning electronic energy levels, and tailoring molecular packing. This work demonstrates that the carrier mobilities of indeno[1,2‐b ]fluorene‐6,12‐dione ( IFD )‐based semiconductors can be dramatically enhanced by the incorporation of sulfur‐ or nitrogen‐linked side chains. Three IFD derivatives possessing butyl, butylthio, and dibutylamino substituents are synthesized, and their organic field‐effect transistors (OFET) are fabricated and characterized. The IFD possessing butyl substituents exhibits a very poor charge transport property with mobility lower than 10^?7 cm² V^?1 s^?1. In contrast, the hole mobility is dramatically increased to 1.03 cm² V^?1 s^?1 by replacing the butyl units with dibutylamino groups ( DBA‐IFD ), while the butylthio‐modified IFD ( BT‐IFD ) derivative exhibits a high and balanced ambipolar charge transport property with the maximum hole and electron mobilities up to 0.71 and 0.65 cm² V^?1 s^?1, respectively. Moreover, the complementary metal–oxide–semiconductor‐like inverters incorporated with the ambipolar OFETs shows sharp inversions with a maximum gain value up to 173. This work reveals that modification of the aromatic core with heteroatom‐linked side chains, such as alkylthio or dialkylamino, can be an efficient strategy for the design of high‐performance organic semiconductors.     

Diketopyrrolopyrrole‐Based Conjugated Polymers Synthesized via Direct Arylation Polycondensation for High Mobility Pure n‐Channel Organic Field‐Effect Transistors

High‐performance unipolar n‐type conjugated polymers (CPs) are critical for the development of organic electronics. In the current paper, four “weak donor–strong acceptor” n‐type CPs based on pyridine flanked diketopyrrolopyrrole (PyDPP), namely PPyDPP1‐4FBT, PPyDPP2‐4FBT, PPyDPP1‐4FTVT, and PPyDPP2‐4FTVT, are synthesized via direct arylation polycondensation by using 3,3′,4,4′‐tetrafluoro‐2,2′‐bithiophene (4FBT) or (E)‐1,2‐bis(3,4‐difluorothien‐2‐yl)ethene (4FTVT) as weak donor unit. All four polymers exhibit low‐lying highest occupied molecular orbital (≈ ?5.90 eV) and lowest unoccupied molecular orbital energy levels (≈ ?3.70 eV). Top‐gate/bottom‐contact organic field‐effect transistors based on all four polymers display unipolar n‐channel characteristics with electron mobility (µ_e) above 1 cm² V^?1 s^?1 in air, and presented linear |I_SD|^1/2 ?V_GS plots and weak dependence of the extracted moblity on gate voltage (V_GS), indicative of the reliability of the extracted mobility values. Importantly, the devices based on PPyDPP1‐4FBT and PPyDPP2‐4FBT show a pure unipolar n‐channel transistor behavior as revealed by the typical unipolar n‐channel output characteristics and clear off‐regimes in transfer characteristics. Attributed to its high crystallinity and favorable thin film morphology, PPyDPP2‐4FBT shows the highest µ_e of 2.45 cm² V^?1 s^?1, which is among the highest for unipolar n‐type CPs reported to date. This is also the first report for DPP based pure n‐type CPs with µ_e greater than 1 cm² V^?1 s^?1.     

Transition Metal Dichalcogenide‐Based Transistor Circuits for Gray Scale Organic Light‐Emitting Displays

Two types of transition metal dichalcogenide (TMD) transistors are applied to demonstrate their possibility as switching/driving elements for the pixel of organic light‐emitting diode (OLED) display. Such TMD materials are 6 nm thin WSe₂ and MoS₂ as a p‐type and n‐type channel, respectively, and the pixel is thus composed of external green OLED and nanoscale thin channel field effect transistors (FETs) for switching and driving. The maximum mobility of WSe₂‐FETs either as switch or as driver is ≈30 cm² V^?1 s^?1, in linear regime of the gate voltage sweep range. Digital (ON/OFF‐switching) and gray‐scale analogue operations of OLED pixel are nicely demonstrated. MoS₂ nanosheet FET‐based pixel is also demonstrated, although limited to alternating gray scale operation of OLED. Device stability issue is still remaining for future study but TMD channel FETs are very promising and novel for their applications to OLED pixel because of their high mobility and I _D ON/OFF ratio.     

High Tg Cyclic Olefin Copolymer Gate Dielectrics for N,N′‐Ditridecyl Perylene Diimide Based Field‐Effect Transistors: Improving Performance and Stability with Thermal Treatment

A novel application of ethylene‐norbornene cyclic olefin copolymers (COC) as gate dielectric layers in organic field‐effect transistors (OFETs) that require thermal annealing as a strategy for improving the OFET performance and stability is reported. The thermally‐treated N,N′‐ditridecyl perylene diimide (PTCDI‐C13)‐based n‐type FETs using a COC/SiO₂ gate dielectric show remarkably enhanced atmospheric performance and stability. The COC gate dielectric layer displays a hydrophobic surface (water contact angle = 95° ± 1°) and high thermal stability (glass transition temperature = 181 °C) without producing crosslinking. After thermal annealing, the crystallinity improves and the grain size of PTCDI‐C13 domains grown on the COC/SiO₂ gate dielectric increases significantly. The resulting n‐type FETs exhibit high atmospheric field‐effect mobilities, up to 0.90 cm² V^?1 s^?1 in the 20 V saturation regime and long‐term stability with respect to H₂O/O₂ degradation, hysteresis, or sweep‐stress over 110 days. By integrating the n‐type FETs with p‐type pentacene‐based FETs in a single device, high performance organic complementary inverters that exhibit high gain (exceeding 45 in ambient air) are realized.     

Sub‐3 V ZnO Electrolyte‐Gated Transistors and Circuits with Screen‐Printed and Photo‐Crosslinked Ion Gel Gate Dielectrics: New Routes to Improved Performance

A facile, high‐resolution patterning process is introduced for fabrication of electrolyte‐gated transistors (EGTs) and circuits using a photo‐crosslinkable ion gel and stencil‐based screen printing. The photo‐crosslinkable gel is based on a triblock copolymer incorporating UV‐sensitive terminal azide functionality and a common ionic liquid. Using this material in conjunction with conventional photolithography and stenciling techniques, well‐defined 0.5–1 μm thick ion gel films are patterned on semiconductor channels as narrow as 10 μm. The resulting n‐type ZnO EGTs display high electron mobility (>2 cm² Vs^?1) and on/off current ratios (>10⁵). Further, EGT‐based inverters exhibit static gains >23 at supply voltages below 3 V, and five‐stage EGT ring oscillator circuits display dynamic propagation delays of 50 μs per stage. In general, the screen printing and photo‐crosslinking strategy provides a clean room‐compatible method to fabricate EGT circuits with improved sensitivity (gain) and computational power (gain × oscillating frequency). Detailed device analysis indicates that significantly shorter delay times, of order 1 μs, can be obtained by improving the ion gel conductance.     

Solution‐Processable Dithienothiophenoquinoid (DTTQ) Structures for Ambient‐Stable n‐Channel Organic Field Effect Transistors

A series of dialkylated dithienothiophenoquinoids ( DTTQ s), end‐functionalized with dicyanomethylene units and substituted with different alkyl chains, are synthesized and characterized. Facile one‐pot synthesis of the dialkylated DTT core is achieved, which enables the efficient realization of DTTQ s as n‐type active semiconductors for solution‐processable organic field effect transistors (OFETs). The molecular structure of hexyl substituted DTTQ‐6 is determined via single‐crystal X‐ray diffraction, revealing DTTQ is a very planar core. The DTTQ cores form a “zig‐zag” linking layer and the layers stack in a “face‐to‐face” arrangement. The very planar core structure, short core stacking distance (3.30 Å), short intermolecular S? N distance (2.84 Å), and very low lying lowest unoccupied molecular orbital energy level of ?4.2 eV suggest that DTTQ s should be excellent electron transport candidates. The physical and electrochemical properties as well as OFETs performance and thin film morphologies of these new DTTQ s are systematically studied. Using a solution‐shearing method, DTTQ‐11 exhibits n‐channel transport with the highest mobility of up to 0.45 cm² V^?1 s^?1 and a current ON/OFF ratio (I _ON/I _OFF) greater than 10⁵. As such, DTTQ‐11 has the highest electron mobility of any DTT‐based small molecule semiconductors yet discovered combined with excellent ambient stability. Within this family, carrier mobility magnitudes are correlated with the alkyl chain length of the side chain substituents of DTTQ s.     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.