Liquid-in-Aerogel Porous Composite Allows Efficient CO2 Capture and CO2/N2 Separation

The pursuit of efficient CO₂ capture materials remains an unmet challenge. Especially, meeting both high sorption capacity and fast uptake kinetics is an ongoing effort in the development of CO₂ sorbents. Here, a strategy to exploit liquid-in-aerogel porous composites (LIAPCs) that allow for highly effective CO₂ capture and selective CO₂/N₂ separation, is reported. Interestingly, the functional liquid tetraethylenepentamine (TEPA) is partially filled into the air pockets of SiO₂ aerogel with left permanent porosity. Notably, the confined liquid thickness is 10.9–19.5 nm, which can be vividly probed by the atomic force microscope and rationalized by tailoring the liquid composition and amount. LIAPCs achieve high affinity between the functional liquid and solid porous counterpart, good structure integrity, and robust thermal stability. LIAPCs exhibit superb CO₂ uptake capacity (5.44 mmol g⁻¹, 75 °C, and 15 vol% CO₂), fast sorption kinetics, and high amine efficiency. Furthermore, LIAPCs ensure long-term adsorption–desorption cycle stability and offer exceptional CO₂/N₂ selectivity both in dry and humid conditions, with a separation factor up to 1182.68 at a humidity of 1%. This approach offers the prospect of efficient CO₂ capture and gas separation, shedding light on new possibilities to make the next-generation sorption materials for CO₂ utilization.     

Amino‐Functionalized ZIF‐7 Nanocrystals: Improved Intrinsic Separation Ability and Interfacial Compatibility in Mixed‐Matrix Membranes for CO2/CH4 Separation

Highly permeable and selective, as well as plasticization‐resistant membranes are desired as promising alternatives for cost‐ and energy‐effective CO₂ separation. Here, robust mixed‐matrix membranes based on an amino‐functionalized zeolitic imidazolate framework ZIF‐7 (ZIF‐7‐NH₂) and crosslinked poly(ethylene oxide) rubbery polymer are successfully fabricated with filler loadings up to 36 wt%. The ZIF‐7‐NH₂ materials synthesized from in situ substitution of 2‐aminobenzimidazole into the ZIF‐7 structure exhibit enlarged aperture size compared with monoligand ZIF‐7. The intrinsic separation ability for CO₂/CH₄ on ZIF‐7‐NH₂ is remarkably enhanced as a result of improved CO₂ uptake capacity and diffusion selectivity. The incorporation of ZIF‐7‐NH₂ fillers simultaneously makes the neat polymer more permeable and more selective, surpassing the state‐of‐the‐art 2008 Robeson upper bound. The chelating effect between metal (zinc) nodes of fillers and ester groups of a polymer provides good bonding, enhancing the mechanical strength and plasticization resistance of the neat polymer membrane. The developed novel ZIF‐7 structure with amino‐function and the resulting nanocomposite membranes are very attractive for applications like natural‐gas sweetening or biogas purification.     

CO2‐Philic Separation Membrane: Deep Eutectic Solvent Filled Graphene Oxide Nanoslits

CO₂ capture and sequestration is an energy‐intensive industry to deal with the global greenhouse effect. Membrane separation is considered a cost‐effective method to mitigate the emission of CO₂. Though good separation performance and stability have been reported, supported ionic liquid membranes are still not widely applied for CO₂ separation due to the high cost. As a novel analogous solvent to ionic liquid, deep eutectic solvent retains the excellent merits of ionic liquid and is cheap with facile preparation. Herein, a highly CO₂‐philic separation membrane is constructed by nanoconfining choline chloride/ethylene glycol (ChCl/EG) deep eutectic solvent into graphene oxide nanoslits. Molecular dynamic simulation results indicate that the confinement makes a difference to the structure of the nanoconfined ChCl/EG liquid from their bulk, which remarkably facilitates CO₂ transport. By tuning the molar ratio of ChCl/EG and thickness of the membrane, the resultant membrane exhibits outstanding separation performance for CO₂ with excellent selectivity over other light gases, good long‐term durability, and thermal stability. This makes it a promising membrane for selective CO₂ separation.     

Surface‐Halogenation‐Induced Atomic‐Site Activation and Local Charge Separation for Superb CO2 Photoreduction

Solar‐energy‐driven CO₂ conversion into value‐added chemical fuels holds great potential in renewable energy generation. However, the rapid recombination of charge carriers and deficient reactive sites, as two major obstacles, severely hampers the photocatalytic CO₂ reduction activity. Herein, a desirable surface halogenation strategy to address the aforementioned concerns over a Sillén‐related layer‐structured photocatalyst Bi₂O₂(OH)(NO₃) (BON) is demonstrated. The surface halogen ions that are anchored on the Bi atoms by replacing surface hydroxyls on the one hand facilitate the local charge separation, and, on the other hand, activate the hydroxyls that profoundly boost the adsorption of CO₂ molecules and protons and facilitate the CO₂ conversion process, as evidenced by experimental and theoretical results collectively. Among the three series of BON‐X (X = Cl, Br, and I) catalysts, BON‐Br shows the most substantially enhanced CO production rate (8.12 µmol g^?1 h^?1) without any sacrificial agents or cocatalysts, ≈73 times higher than that of pristine Bi₂O₂(OH)(NO₃), also exceeding that of the state‐of‐the‐art photocatalysts reported to date. This work presents a surface polarization protocol for engineering charge behavior and reactive sites to promote photocatalysis, which shows great promise to the future design of high‐performance materials for clean energy production.     

A Robust Molecular Porous Material for C2H2/CO2 Separation

A molecular porous material, MPM-2, comprised of cationic [Ni₂(AlF₆)(pzH)₈(H₂O)₂] and anionic [Ni₂Al₂F₁₁(pzH)₈(H₂O)₂] complexes that generate a charge-assisted hydrogen-bonded network with pcu topology is reported. The packing in MPM-2 is sustained by multiple interionic hydrogen bonding interactions that afford ultramicroporous channels between dense layers of anionic units. MPM-2 is found to exhibit excellent stability in water (>1 year). Unlike most hydrogen-bonded organic frameworks which typically show poor stability in organic solvents, MPM-2 exhibited excellent stability with respect to various organic solvents for at least two days. MPM-2 is found to be permanently porous with gas sorption isotherms at 298 K revealing a strong affinity for C₂H₂ over CO₂ thanks to a high (ΔQ_st)_AC [Q_st (C₂H₂) − Q_st (CO₂)] of 13.7 kJ mol⁻¹ at low coverage. Dynamic column breakthrough experiments on MPM-2 demonstrated the separation of C₂H₂ from a 1:1 C₂H₂/CO₂ mixture at 298 K with effluent CO₂ purity of 99.995% and C₂H₂ purity of >95% after temperature-programmed desorption. C-H···F interactions between C₂H₂ molecules and F atoms of AlF₆³⁻ are found to enable high selectivity toward C₂H₂, as determined by density functional theory simulations.     

In Situ Grown Monolayer N‐Doped Graphene on CdS Hollow Spheres with Seamless Contact for Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is an effective way to simultaneously mitigate the greenhouse effect and the energy crisis. Herein, CdS hollow spheres, on which monolayer nitrogen‐doped graphene is in situ grown by chemical vapor deposition, are applied for realizing effective photocatalytic CO₂ reduction. The constructed photocatalyst possesses a hollow interior for strengthening light absorption, a thin shell for shortening the electron migration distance, tight adhesion for facilitating separation and transfer of carriers, and a monolayer nitrogen‐doped graphene surface for adsorbing and activating CO₂ molecules. Achieving seamless contact between a photocatalyst and a cocatalyst, which provides a pollution‐free and large‐area transport interface for carriers, is an effective strategy for improving the photocatalytic CO₂ reduction performance. Therefore, the yield of CO and CH₄, as dominating products, can be increased by four and five times than that of pristine CdS hollow spheres, respectively. This work emphasizes the importance of contact interface regulation between the photocatalyst and the cocatalyst and provides new ideas for the seamless and large‐area contact of heterojunctions.     

Single Ni Atoms Anchored on Porous Few‐Layer g‐C3N4 for Photocatalytic CO2 Reduction: The Role of Edge Confinement

It is greatly intriguing yet remains challenging to construct single‐atomic photocatalysts with stable surface free energy, favorable for well‐defined atomic coordination and photocatalytic carrier mobility during the photoredox process. Herein, an unsaturated edge confinement strategy is defined by coordinating single‐atomic‐site Ni on the bottom‐up synthesized porous few‐layer g‐C₃N₄ (namely, Ni₅‐CN) via a self‐limiting method. This Ni₅‐CN system with a few isolated Ni clusters distributed on the edge of g‐C₃N₄ is beneficial to immobilize the nonedged single‐atomic‐site Ni species, thus achieving a high single‐atomic active site density. Remarkably, the Ni₅‐CN system exhibits comparably high photocatalytic activity for CO₂ reduction, giving the CO generation rate of 8.6 µmol g^?1 h^?1 under visible‐light illumination, which is 7.8 times that of pure porous few‐layer g‐C₃N₄ (namely, CN, 1.1 µmol g^?1 h^?1). X‐ray absorption spectrometric analysis unveils that the cationic coordination environment of single‐atomic‐site Ni center, which is formed by Ni‐N doping‐intercalation the first coordination shell, motivates the superiority in synergistic N–Ni–N connection and interfacial carrier transfer. The photocatalytic mechanistic prediction confirms that the introduced unsaturated Ni‐N coordination favorably binds with CO₂, and enhances the rate‐determining step of intermediates for CO generation.     

Surface Immobilization of Transition Metal Ions on Nitrogen‐Doped Graphene Realizing High‐Efficient and Selective CO2 Reduction

Electrochemical conversion of CO₂ to value‐added chemicals using renewable electricity provides a promising way to mitigate both global warming and the energy crisis. Here, a facile ion‐adsorption strategy is reported to construct highly active graphene‐based catalysts for CO₂ reduction to CO. The isolated transition metal cyclam‐like moieties formed upon ion adsorption are found to contribute to the observed improvements. Free from the conventional harsh pyrolysis and acid‐leaching procedures, this solution‐chemistry strategy is easy to scale up and of general applicability, thus paving a rational avenue for the design of high‐efficiency catalysts for CO₂ reduction and beyond.     

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated,Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Sodium‐ion batteries (SIBs) are considered promising next‐generation energy storage devices. However, a lack of appropriate high‐performance anode materials has prevented further improvements. Here, a hierarchical porous hybrid nanosheet composed of interconnected uniform TiO₂ nanoparticles and nitrogen‐doped graphene layer networks (TiO₂@NFG HPHNSs) that are synthesized using dual‐functional C₃N₄ nanosheets as both the self‐sacrificing template and hybrid carbon source is reported. These HPHNSs deliver high reversible capacities of 146 mA h g^?1 at 5 C for 8000 cycles, 129 mA h g^?1 at 10 C for 20 000 cycles, and 116 mA h g^?1 at 20 C for 10 000 cycles, as well as an ultrahigh rate capability up to 60 C with a capacity of 101 mA h g^?1. These results demonstrate the longest cyclabilities and best rate capability ever reported for TiO₂‐based anode materials for SIBs. The unprecedented sodium storage performance of the TiO₂@NFG HPHNSs is due to their unique composition and hierarchical porous 2D structure.     

N‐Doped C@Zn3B2O6 as a Low Cost and Environmentally Friendly Anode Material for Na‐Ion Batteries: High Performance and New Reaction Mechanism

Na‐ion batteries (NIBs) are ideal candidates for solving the problem of large‐scale energy storage, due to the worldwide sodium resource, but the efforts in exploring and synthesizing low‐cost and eco‐friendly anode materials with convenient technologies and low‐cost raw materials are still insufficient. Herein, with the assistance of a simple calcination method and common raw materials, the environmentally friendly and nontoxic N‐doped C@Zn₃B₂O₆ composite is directly synthesized and proved to be a potential anode material for NIBs. The composite demonstrates a high reversible charge capacity of 446.2 mAh g^?1 and a safe and suitable average voltage of 0.69 V, together with application potential in full cells (discharge capacity of 98.4 mAh g^?1 and long cycle performance of 300 cycles at 1000 mA g^?1). In addition, the sodium‐ion storage mechanism of N‐doped C@Zn₃B₂O₆ is subsequently studied through air‐insulated ex situ characterizations of X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform infrared (FT‐IR) spectroscopy, and is found to be rather different from previous reports on borate anode materials for NIBs and lithium‐ion batteries. The reaction mechanism is deduced and proposed as: Zn₃B₂O₆ + 6Na⁺ + 6e^? ? 3Zn + B₂O₃ ? 3Na₂O, which indicates that the generated boracic phase is electrochemically active and participates in the later discharge/charge progress.     

Synthetic Two‐Dimensional Materials: A New Paradigm of Membranes for Ultimate Separation

Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two‐dimensional materials (2DMs), with a thickness of one to a few atoms or monomer units are ideal candidates for developing separation membranes. Here, groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination are presented. This report describes the syntheses, structures, and mechanical properties of 2DMs. The established methods for processing 2DMs into selective permeation membranes are also discussed and the separation mechanism and their performances addressed. Current challenges and emerging research directions, which need to be addressed for developing next‐generation separation membranes, are summarized.     

Self‐Assembly of Thiourea‐Crosslinked Graphene Oxide Framework Membranes toward Separation of Small Molecules

The poor mechanical strength of graphene oxide (GO) membranes, caused by the weak interlamellar interactions, poses a critical challenge for any practical application. In addition, intrinsic but large‐sized 2D channels of stacked GO membranes lead to low selectivity for small molecules. To address the mechanical strength and 2D channel size control, thiourea covalent‐linked graphene oxide framework (TU‐GOF) membranes on porous ceramics are developed through a facile hydrothermal self‐assembly synthesis. With this strategy, thiourea‐bridged GO laminates periodically through the dehydration condensation reactions via ? NH₂ and/or ? SH with ? O?C? OH as well as the nucleophilic addition reactions of ? NH₂ to C? O? C, leading to narrowed and structurally well‐defined 2D channels due to the small dimension of the covalent TU‐link and the deoxygenated processes. The resultant TU‐GOF/ceramic composite membranes feature excellent sieving capabilities for small species, leading to high hydrogen permselectivities and nearly complete rejections for methanol and small ions in gas, solvent, and saline water separations. Moreover, the covalent bonding formed at the GO/support and GO/GO interfaces endows the composite membrane with significantly enhanced stability.     

Efficient Metal‐Free Electrocatalysts from N‐Doped Carbon Nanomaterials: Mono‐Doping and Co‐Doping

N‐doped carbon nanomaterials have rapidly grown as the most important metal‐free catalysts in a wide range of chemical and electrochemical reactions. This current report summarizes the latest advances in N‐doped carbon electrocatalysts prepared by N mono‐doping and co‐doping with other heteroatoms. The structure–performance relationship of these materials is subsequently rationalized and perspectives on developing more efficient and sustainable electrocatalysts from carbon nanomaterials are also suggested.     

Electrospun N‐Doped Porous Carbon Nanofibers Incorporated with NiO Nanoparticles as Free‐Standing Film Electrodes for High‐Performance Supercapacitors and CO2 Capture

Carbon nanofibers (CNF) with a 1D porous structure offer promising support to encapsulate transition‐metal oxides in energy storage/conversion relying on their high specific surface area and pore volume. Here, the preparation of NiO nanoparticle‐dispersed electrospun N‐doped porous CNF (NiO/PCNF) and as free‐standing film electrode for high‐performance electrochemical supercapacitors is reported. Polyacrylonitrile and nickel acetylacetone are selected as precursors of CNF and Ni sources, respectively. Dicyandiamide not only improves the specific surface area and pore volume, but also increases the N‐doping level of PCNF. Benefiting from the synergistic effect between NiO nanoparticles (NPs) and PCNF, the prepared free‐standing NiO/PCNF electrodes show a high specific capacitance of 850 F g^?1 at a current density of 1 A g^?1 in 6 m KOH aqueous solution, good rate capability, as well as excellent long‐term cycling stability. Moreover, NiO NPs dispersed in PCNF and large specific surface area provide many electroactive sites, leading to high CO₂ uptake, and high‐efficiency CO₂ electroreduction. The synthesis strategy in this study provides a new insight into the design and fabrication of promising multifunctional materials for high‐performance supercapacitors and CO₂ electroreduction.