Flexible Porous Organic Polymer Membranes for Protonic Field-Effect Transistors

Artificial transistors represent an ideal means for meeting the requirements in interfacing with biological systems. It is pivotal to develop new proton-conductive materials for the transduction between biochemical events and electronic signals. Herein, the first demonstration of a porous organic polymer membrane (POPM) as a proton-conductive material for protonic field-effect transistors is presented. The POPM is readily prepared through a thiourea-formation condensation reaction. Under hydrated conditions and at room temperature, the POPM delivers a proton mobility of 5.7 × 10⁻³ cm² V⁻¹ s⁻¹; the charge carrier densities are successfully modulated from 4.3 × 10¹⁷ to 14.1 × 10¹⁷ cm⁻³ by the gate voltage. This study provides a type of promising modular proton-conductive materials for bioelectronics application.     

Relieving the Photosensitivity of Organic Field-Effect Transistors

It is generally believed that the photoresponse behavior of organic field-effect transistors (OFETs) reflects the intrinsic property of organic semiconductors. However, this photoresponse hinders the application of OFETs in transparent displays as driven circuits due to the current instability resulting from the threshold voltage shift under light illumination. It is necessary to relieve the photosensitivity of OFETs to keep the devices stable. 2,6-diphenyl anthracene thin-film and single-crystal OFETs are fabricated on different substrates, and it is found that the degree of molecular order in the conducting channels and the defects at the dielectric/semiconductor interface play important roles in determining the phototransistor performance. When highly ordered single-crystal OFETs are fabricated on polymeric substrates with low defects, the photosensitivity (P) decreases by more than 10⁵ times and the threshold voltage shift (ΔV_T) is almost eliminated compared with the corresponding thin-film OFETs. This phenomenon is further verified by using another three organic semiconductors for similar characterizations. The decreased P and ΔV_T of OFETs ensure a good current stability for OFETs to drive organic light-emitting diodes efficiently, which is essential to the application of OFETs in flexible and transparent displays.     

Flexible Electronics Based on Organic Semiconductors: from Patterned Assembly to Integrated Applications

Organic flexible electronic devices are at the forefront of the electronics as they possess the potential to bring about a major lifestyle revolution owing to outstanding properties of organic semiconductors, including solution processability, lightweight and flexibility. For the integration of organic flexible electronics, the precise patterning and ordered assembly of organic semiconductors have attracted wide attention and gained rapid developments, which not only reduces the charge crosstalk between adjacent devices, but also enhances device uniformity and reproducibility. This review focuses on recent advances in the design, patterned assembly of organic semiconductors, and flexible electronic devices, especially for flexible organic field-effect transistors (FOFETs) and their multifunctional applications. First, typical organic semiconductor materials and material design methods are introduced. Based on these organic materials with not only superior mechanical properties but also high carrier mobility, patterned assembly strategies on flexible substrates, including one-step and two-step approaches are discussed. Advanced applications of flexible electronic devices based on organic semiconductor patterns are then highlighted. Finally, future challenges and possible directions in the field to motivate the development of the next generation of flexible electronics are proposed.     

Impact of Narrowing Density of States in Semiconducting Polymers on Performance of Organic Field-Effect Transistors

To improve the performance of organic field-effect transistors (OFETs) employing π-conjugated polymers, a basic understanding of the relationships between the material properties and device characteristics is crucial. Although the density of states (DOS) distribution is one of the essential material properties of semiconducting polymers, insights into how the DOS shape affects the mobility (µ), subthreshold swing (S), and contact resistance (R_C) in OFETs remain lacking. In this study, by combining sensitive DOS measurements and multilayered OFET structures, it is experimentally demonstrated that narrower DOS widths in the polymer channels lead to higher µ, smaller S, and lower R_C. By contrast, variation of the DOS in the bulk layer does not affect the performance. These results demonstrate a direct relationship between the polymer properties and OFET performance and highlight the importance of controlling the DOS width in π-conjugated polymers.     

Meniscus-Guided Deposition of Organic Semiconductor Thin Films: Materials,Mechanism, and Application in Organic Field-Effect Transistors

Solution-processable organic semiconductors are one of the promising materials for the next generation of organic electronic products, which call for high-performance materials and mature processing technologies. Among many solution processing methods, meniscus-guided coating (MGC) techniques have the advantages of large-area, low-cost, adjustable film aggregation, and good compatibility with the roll-to-roll process, showing good research results in the preparation of high-performance organic field-effect transistors. In this review, the types of MGC techniques are first listed and the relevant mechanisms (wetting mechanism, fluid mechanism, and deposition mechanism) are introduced. The MGC processes are focused and the effect of the key coating parameters on the thin film morphology and performance with examples is illustrated. Then, the performance of transistors based on small molecule semiconductors and polymer semiconductor thin films prepared by various MGC techniques is summarized. In the third section, various recent thin film morphology control strategies combined with the MGCs are introduced. Finally, the advanced progress of large-area transistor arrays and the challenges for roll-to-roll processes are presented using MGCs. Nowadays, the application of MGCs is still in the exploration stage, its mechanism is still unclear, and the precise control of film deposition still needs experience accumulation.     

Operational Stability of Organic Field-Effect Transistors

Organic field-effect transistors (OFETs) are considered in technological applications for which low cost or mechanical flexibility are crucial factors. The environmental stability of the organic semiconductors used in OFETs has improved to a level that is now sufficient for commercialization. However, serious problems remain with the stability of OFETs under operation. The causes for this have remained elusive for many years. Surface potentiometry together with theoretical modeling provide new insights into the mechanisms limiting the operational stability. These indicate that redox reactions involving water are involved in an exchange of mobile charges in the semiconductor with protons in the gate dielectric. This mechanism elucidates the established key role of water and leads in a natural way to a universal “stress function”, describing the stretched exponential-like time dependence ubiquitously observed. Further study is needed to determine the generality of the mechanism and the role of other mechanisms.     

Research Progress of Organic Field-Effect Transistor Based Chemical Sensors

Due to their high sensitivity and selectivity, chemical sensors have gained significant attention in various fields, including drug security, environmental testing, food safety, and biological medicine. Among them, organic field-effect transistor (OFET) based chemical sensors have emerged as a promising alternative to traditional sensors, exhibiting several advantages such as multi-parameter detection, room temperature operation, miniaturization, flexibility, and portability. This review paper presents recent research progress on OFET-based chemical sensors, highlighting the enhancement of sensor performance, including sensitivity, selectivity, stability, etc. The main improvement programs are improving the internal and external structures of the device, as well as the organic semiconductor layer and dielectric structure. Finally, an outlook on the prospects and challenges of OFET-based chemical sensors is presented.     

Organic Light‐Emitting Transistors: Materials,Device Configurations,and Operations

Organic light‐emitting transistors (OLETs) represent an emerging class of organic optoelectronic devices, wherein the electrical switching capability of organic field‐effect transistors (OFETs) and the light‐generation capability of organic light‐emitting diodes (OLEDs) are inherently incorporated in a single device. In contrast to conventional OFETs and OLEDs, the planar device geometry and the versatile multifunctional nature of OLETs not only endow them with numerous technological opportunities in the frontier fields of highly integrated organic electronics, but also render them ideal scientific scaffolds to address the fundamental physical events of organic semiconductors and devices. This review article summarizes the recent advancements on OLETs in light of materials, device configurations, operation conditions, etc. Diverse state‐of‐the‐art protocols, including bulk heterojunction, layered heterojunction and laterally arranged heterojunction structures, as well as asymmetric source‐drain electrodes, and innovative dielectric layers, which have been developed for the construction of qualified OLETs and for shedding new and deep light on the working principles of OLETs, are highlighted by addressing representative paradigms. This review intends to provide readers with a deeper understanding of the design of future OLETs.