具有2D-EDAPbI4薄覆盖层的环境稳定的FAPbI3基钙钛矿太阳能电池（英文）

二维(2D)卤化铅钙钛矿材料是钙钛矿太阳能电池(PSC)中最有前途的吸光材料之一,具有优异的稳定性和缺陷钝化作用.然而,这些稳定的二维PSC的转换效率仍远远落后于三维钙钛矿电池.在本文中我们通过原位生长的方法将2D EDAPbI4层成功制备在3D FAPbI3层表面。这种合理设计的2D-3D钙钛矿薄膜分层结构可以明显提高电池的效率.另外,由于EDAPbI4层的高抗湿性和抑制迁移, 2D-3D电池器件显示出明显增强的长期稳定性,在200 h内一直保持初始转换效率,甚至在500 h后仍能保持其初始转化效率的90%.     

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

Almost all highly efficient perovskite solar cells (PVSCs) with power conversion efficiencies (PCEs) of greater than 22% currently contain the thermally unstable methylammonium (MA) molecule. MA-free perovskites are an intrinsically more stable optoelectronic material for use in solar cells but compromise the performance of PVSCs with relatively large energy loss. Here, the open-circuit voltage (V_oc) deficit is circumvented by the incorporation of β-guanidinopropionic acid (β-GUA) molecules into an MA-free bulk perovskite, which facilitates the formation of quasi-2D structure with face-on orientation. The 2D/3D hybrid perovskites embed at the grain boundaries of the 3D bulk perovskites and are distributed through half the thickness of the film, which effectively passivates defects and minimizes energy loss of the PVSCs through reduced charge recombination rates and enhanced charge extraction efficiencies. A PCE of 22.2% (certified efficiency of 21.5%) is achieved and the operational stability of the MA-free PVSCs is improved.     

基于对氯苄胺的2D/3D钙钛矿太阳能电池

三维(3D)有机–无机金属卤化物钙钛矿薄膜的表面和晶界处存在大量缺陷,容易导致载流子的非辐射复合并加快3D钙钛矿分解,进而影响钙钛矿太阳能电池(PSCs)能量转换效率(PCE)及稳定性.本研究通过引入对氯苄胺阳离子,与3D钙钛矿薄膜及其表面过剩的碘化铅反应后原位形成了二维(2D)钙钛矿,实现了对3D钙钛矿薄膜表面和晶界...     

Amide‐Catalyzed Phase‐Selective Crystallization Reduces Defect Density in Wide‐Bandgap Perovskites

Wide‐bandgap (WBG) formamidinium–cesium (FA‐Cs) lead iodide–bromide mixed perovskites are promising materials for front cells well‐matched with crystalline silicon to form tandem solar cells. They offer avenues to augment the performance of widely deployed commercial solar cells. However, phase instability, high open‐circuit voltage (V_oc) deficit, and large hysteresis limit this otherwise promising technology. Here, by controlling the crystallization of FA‐Cs WBG perovskite with the aid of a formamide cosolvent, light‐induced phase segregation and hysteresis in perovskite solar cells are suppressed. The highly polar solvent additive formamide induces direct formation of the black perovskite phase, bypassing the yellow phases, thereby reducing the density of defects in films. As a result, the optimized WBG perovskite solar cells (PSCs) (E_g ≈ 1.75 eV) exhibit a high V_oc of 1.23 V, reduced hysteresis, and a power conversion efficiency (PCE) of 17.8%. A PCE of 15.2% on 1.1 cm² solar cells, the highest among the reported efficiencies for large‐area PSCs having this bandgap is also demonstrated. These perovskites show excellent phase stability and thermal stability, as well as long‐term air stability. They maintain ≈95% of their initial PCE after 1300 h of storage in dry air without encapsulation.     

Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy

Even though the power conversion efficiency (PCE) of rigid perovskite solar cells is increased to 22.7%, the PCE of flexible perovskite solar cells (F‐PSCs) is still lower. Here, a novel dimethyl sulfide (DS) additive is developed to effectively improve the performance of the F‐PSCs. Fourier transform infrared spectroscopy reveals that the DS additive reacts with Pb²⁺ to form a chelated intermediate, which significantly slows down the crystallization rate, leading to large grain size and good crystallinity for the resultant perovskite film. In fact, the trap density of the perovskite film prepared using the DS additive is reduced by an order of magnitude compared to the one without it, demonstrating that the additive effectively retards transformation kinetics during the thin film formation process. As a result, the PCE of the flexible devices increases to 18.40%, with good mechanical tolerance, the highest reported so far for the F‐PSCs. Meanwhile, the environmental stability of the F‐PSCs significantly enhances by 1.72 times compared to the device without the additive, likely due to the large grain size that suppresses perovskite degradation at grain boundaries. The present strategy will help guide development of high efficiency F‐PSCs for practical applications.     

Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells

Chemical interaction at a heterojunction interface induced by an appropriate chemical linker is of crucial importance for high efficiency, hysteresis‐less, and stable perovskite solar cells (PSCs). Effective interface engineering in PSCs is reported via a multifunctional chemical linker of 4‐imidazoleacetic acid hydrochloride (ImAcHCl) that can provide a chemical bridge between SnO₂ and perovskite through an ester bond with SnO₂ via esterification reaction and an electrostatic interaction with perovskite via imidazolium cation in ImAcHCl and iodide anion in perovskite. In addition, the chloride anion in ImAcHCl plays a role in the improvement of crystallinity of perovskite film crystallinity. The introduction of ImAcHCl onto SnO₂ realigns the positions of the conduction and valence bands upwards, reduces nonradiative recombination, and improves carrier life time. As a consequence, average power conversion efficiency (PCE) is increased from 18.60% ± 0.50% to 20.22% ± 0.34% before and after surface modification, respectively, which mainly results from an enhanced voltage from 1.084 ± 0.012 V to 1.143 ± 0.009 V. The best PCE of 21% is achieved by 0.1 mg mL^?1 ImAcHCl treatment, along with negligible hysteresis. Moreover, an unencapsulated device with ImAcHCl‐modified SnO₂ shows much better thermal and moisture stability than unmodified SnO₂.     

Bidirectional Anions Gathering Strategy Afford Efficient Mixed Pb?Sn Perovskite Solar Cells

Mixed lead-tin (Pb Sn) perovskite solar cells (PSCs) possess low toxicity and adjustable bandgap for both single-junction and all-perovskite tandem solar cells. However, the performance of mixed Pb Sn PSCs still lags behind the theoretical efficiency. The uncontrollable crystallization and the resulting structural defect are important reasons. Here, the bidirectional anions gathering strategy (BAG) is reported by using Methylammonium acetate (MAAc) and Methylammonium thiocyanate (MASCN) as perovskite bulk additives, which Ac⁻ escapes from the perovskite film top surface while SCN⁻ gathers at the perovskite film bottom in the crystallization process. After the optoelectronic techniques, the bidirectional anions movement caused by the top-down gradient crystallization is demonstrated. The layer-by-layer crystallization can collect anions in the next layer and gather at the broader, enabling a controllable crystallization process, thus getting a high-quality perovskite film with better phase crystallinity and lower defect concentration. As a result, PSCs treated by the BAG strategy exhibit outstanding photovoltaic and electroluminescent performance with a champion efficiency of 22.14%. Additionally, it demonstrates excellent long-term stability, which retains ≈92.8% of its initial efficiency after 4000 h aging test in the N₂ glove box.     

Extrinsic Ion Distribution Induced Field Effect in CsPbIBr2 Perovskite Solar Cells

Excellent power conversion efficiency (PCE) and stability are the primary forces that propel the all‐inorganic cesium‐based halide perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high density of trap state and internal nonradiative recombination of CsPbIBr₂ perovskite film are the barriers that limit its development. In the present study, a facile additive strategy is introduced to fabricate highly efficient CsPbIBr₂ PSCs by incorporating sulfamic acid sodium salt (SAS) into the perovskite layer. The additive can control the crystallization behaviors and optimize morphology, as well as effectively passivate defects in the bulk perovskite film, thereby resulting in a high‐quality perovskite. In addition, SAS in perovskite has possibly introduced an additional internal electric field effect that favors electron transport and injection due to inhomogeneous ion distribution. A champion PCE of 10.57% (steady‐output efficiency is 9.99%) is achieved under 1 Sun illumination, which surpasses that of the contrast sample by 16.84%. The modified perovskite film also exhibits improved moisture stability. The unencapsulated device maintains over 80% initial PCE after aging for 198 h in air. The results provide a suitable additive for inorganic perovskite and introduce a new conjecture to explain the function of additives in PSCs more rationally.     

Blading Phase-Pure Formamidinium-Alloyed Perovskites for High-Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Currently, blade-coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), that is, greater than 20%, normally employ methylammonium lead tri-iodide with a sub-optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA-alloyed perovskites show low phase stability and high moisture sensitivity. Here, it is reported that incorporating 0.83 molar percent organic halide salts (OHs) into perovskite inks enables phase-pure, highly crystalline FA-alloyed perovskites with extraordinary optoelectronic properties. The OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. A high efficiency of 22.0% under 1 sun illumination for blade-coated PSCs is demonstrated with an open-circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 h.     

Highly Efficient and Stable GABr-Modified Ideal-Bandgap (1.35 eV) Sn/Pb Perovskite Solar Cells Achieve 20.63% Efficiency with a Record Small Voc Deficit of 0.33 V

1.5–1.6 eV bandgap Pb-based perovskite solar cells (PSCs) with 30–31% theoretical efficiency limit by the Shockley–Queisser model achieve 21–24% power conversion efficiencies (PCEs). However, the best PCEs of reported ideal-bandgap (1.3–1.4 eV) Sn–Pb PSCs with a higher 33% theoretical efficiency limit are <18%, mainly because of their large open-circuit voltage (V_oc) deficits (>0.4 V). Herein, it is found that the addition of guanidinium bromide (GABr) can significantly improve the structural and photoelectric characteristics of ideal-bandgap (≈1.34 eV) Sn–Pb perovskite films. GABr introduced in the perovskite films can efficiently reduce the high defect density caused by Sn²⁺ oxidation in the perovskite, which is favorable for facilitating hole transport, decreasing charge-carrier recombination, and reducing the V_oc deficit. Therefore, the best PCE of 20.63% with a certificated efficiency of 19.8% is achieved in 1.35 eV PSCs, along with a record small V_oc deficit of 0.33 V, which is the highest PCE among all values reported to date for ideal-bandgap Sn–Pb PSCs. Moreover, the GABr-modified PSCs exhibit significantly improved environmental and thermal stability. This work represents a noteworthy step toward the fabrication of efficient and stable ideal-bandgap PSCs.     

Co-Solvent Engineering Contributing to Achieve High-Performance Perovskite Solar Cells and Modules Based on Anti-Solvent Free Technology

The pinhole-free and defect-less perovskite film is crucial for achieving high efficiency and stable perovskite solar cells (PSCs), which can be prepared by widely used anti-solvent crystallization strategies. However, the involvement of anti-solvent requires precise control and inevitably brings toxicity in fabrication procedures, which limits its large-scale industrial application. In this work, a facile and effective co-solvent engineering strategy is introduced to obtain high- quality perovskite film while avoiding the usage of anti-solvent. The uniform and compact perovskite polycrystalline films have been fabricated through the addition of co-solvent that owns strong coordination capacity with perovskite components , meanwhile possessing the weaker interaction with main solvent . With those strategies, a champion power conversion efficiency (PCE) of 22% has been achieved with the optimal co-solvent, N-methylpyrrolidone (NMP) and without usage of anti-solvent. Subsequently, PSCs based on NMP show high repeatability and good shelf stability (80% PCE remains after storing in ambient condition for 30 days). Finally, the perovskite solar module (5 × 5 cm) with 7 subcells connects in series yielding champion PCE of 16.54%. This strategy provides a general guidance of co-solvent selection for PSCs based on anti-solvent free technology and promotes commercial application of PSCs.     

Organic-Salt-Assisted Crystal Growth and Orientation of Quasi-2D Ruddlesden–Popper Perovskites for Solar Cells with Efficiency over 19%

Quasi-2D Ruddlesden–Popper (RP) perovskite solar cells (PSCs) have drawn significant attention due to their appealing environmental stability compared to their 3D counterparts. However, the relatively low power conversion efficiency (PCE) greatly limits their applications. Here, high photovoltaic performance is demonstrated for quasi-2D RP PSCs using 2-thiophenemethylammonium as spacer with nominal n-value of 5, which is based on the stoichiometry of the precursors. The incorporation of formamidinium (FA) in quasi-2D RP perovskites reduces the bandgap and improves the light absorption ability, resulting in enlarged photocurrent and an increased PCE of 16.18%, which is higher than that of reported analogous methylammonium (MA)-based quasi-2D PSC (≈15%). A record high PCE of 19.06% is further demonstrated by using an organic salt, namely, 4-(trifluoromethyl)benzylammonium iodide, assisted crystal growth (OACG) technique, which can induce the crystal growth and orientation, tune the surface energy levels, and suppress the charge recombination losses. More importantly, the devices based on OACG-processed quasi-2D RP perovskites show remarkable environmental stability and thermal stability, for example, the PCE retaining ≈96% of its initial value after storage at 80 °C for 576 h, while only ≈37% of the original efficiency left for FAPbI₃-based 3D PSCs.     

Highly Efficient and Stable Perovskite Solar Cells: Competitive Crystallization Strategy and Synergistic Passivation

Defects of perovskite (PVK) films are one of the main obstacles to achieving high-performance perovskite solar cells (PSCs). Here, the authors fabricated highly efficient and stable PSCs by introducing prolinamide (ProA) into the PbI₂ precursor solution, which improves the performance of PSCs by the competitive crystallization and efficient defect passivation of perovskite. The theoretical and experimental results indicate that ProA forms an adduct with PbI₂, competes with free I⁻ to coordinate with Pb²⁺, leads to the increase of the energy barrier of crystallization, and slows down the crystallization rate. Furthermore, the dual-site synergistic passivation of ProA is revealed by density functional theory (DFT) calculations and experimental results. ProA effectively reduces non-radiative recombination in the resultant films to improve the photovoltaic performance of PSCs. Notably, ProA-assisted PSCs achieve 24.61% power conversion efficiency (PCE) for the champion device and the stability of PSCs devices under ambient and thermal environments is improved.     

Dual function of a high-contrast hydrophobic-hydrophilic coating for enhanced stability of perovskite solar cells in extremely humid environments

In spite of a continuous increase in their power conversion efficiency (PCE) and an economically viable fabrication process,organic-inorganic perovskite solar cells (PSCs) pose a significant problem when used in practical applications:They show fast degradation of the PCE when exposed to very humid environments.In this study,the stability of PSCs under very humid conditions is greatly enhanced by coating the surface of the PSC devices with a multi-layer film consisting of ultrahydrophobic and relatively hydrophilic layers.A hydrophobic composite of poly(methyl methacrylate) (PMMA),polyurethane (PU),and SiO2 nanoparticles successfully retards the water molecules from very humid surroundings.Also,the hydrophilic layer with moderately PMMA captures the residual moisture within the perovskite layer;subsequently,the perovskite layer recovers.This dual function of the coating film keeps the PCE of PSCs at 17.3％ for 180 min when exposed to over 95％ humidity.     

Suppressed Voltage Deficit and Degradation of Perovskite Solar Cells by Regulating the Mineralization of Lead Iodide

Both the uncoordinated Pb²⁺ and excess PbI₂ in perovskite film will create defects and perturb carrier collection, thus leading to the open-circuit voltage (V_OC) loss and inducing rapid performance degradation of perovskite solar cells (PSCs). Herein, an additive of 3-aminothiophene-2-carboxamide (3-AzTca) that contains amide and amino and features a large molecular size is introduced to improve the quality of perovskite film. The interplay of size effect and adequate bonding strength between 3-AzTca and uncoordinated Pb²⁺ regulates the mineralization of PbI₂ and generates low-dimensional PbI₂ phase, thereby boosting the crystallization of perovskite. The decreased defect states result in suppressed nonradiative recombination and reduced V_OC loss. The power conversion efficiency (PCE) of modified PSC is improved to 22.79% with a high V_OC of 1.22 V. Moreover, the decomposition of PbI₂ and perovskite films is also retarded, yielding enhanced device stability. This study provides an effective method to minimize the concentration of uncoordinated Pb²⁺ and improve the PCE and stability of PSCs.     

Efficient Perovskite Solar Cells Fabricated Through CsCl‐Enhanced PbI2 Precursor via Sequential Deposition

The fabrication of high‐quality perovskite film highly relies on chemical composition and the synthesis method of perovskite. So far, sequentially deposited MA_0.03FA_0.97Pb(I_0.97Br_0.03)₃ polycrystalline film is adopted to produce high‐performance perovskite solar cells with record power conversion efficiency (PCE). Fewer grain boundaries and incorporation of inorganic cation (e.g., cesium) would further increase device performance via sequential deposition. Here, cesium chloride (CsCl) is introduced into lead iodide (PbI₂) precursor solution that beneficially modulates the property of PbI₂ film, leading to larger grains with cesium incorporation in the resulting perovskite film. The enlarged crystal grains originate from a slower nucleation process for CsCl‐containing PbI₂ film when reacting with formamidine iodide, confirmed by in situ confocal photoluminescence imaging. Photovoltaic devices based on CsCl‐containing PbI₂ film demonstrate a higher averaging efficiency of 21.3% than 20.3% of the devices without CsCl additives for reverse scan. More importantly, the device stability is improved by CsCl additives that retain over 90% of their initial PCE value after 4000 min tracking at maximum power point under 1‐sun illumination. This work paves a way to further improve the photovoltaic performance of mixed‐cation‐halide perovskite solar cells via a sequential deposition method.     

Synergistic Ionic Liquid in Hole Transport Layers for Highly Stable and Efficient Perovskite Solar Cells

Perovskite solar cells (PSCs) with n-i-p structures often utilize an organic 2,2′,7,7′-tetrakis (N, N-di-p-methoxyphenyl-amine) 9,9′-spirobifluorene (spiro-OMeTAD) along with additives of lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI) and tert-butylpyridine as the hole transporting layer (HTL). However, the HTL lacks stability in ambient air, and numerous defects are often present on the perovskite surface, which is not conducive to a stable and efficient PSC. Therefore, constructive strategies that simultaneously stabilize spiro-OMeTAD and passivate the perovskite surface are required. In this work, it is demonstrated that a novel ionic liquid of dimethylammonium bis(trifluoromethanesulfonyl)imide (DMATFSI) could act as a bifunctional HTL modulator in n-i-p PSCs. The addition of DMATFSI into spiro-OMeTAD can effectively stabilize the oxidized spiro-OMeTAD⁺ cation radicals through the formation of spiro-OMeTAD⁺TFSI⁻ because of the excellent charge delocalization of the conjugated CF₃SO₂⁻ moiety within TFSI⁻. In addition, DMA⁺ cations could move toward the perovskite from the HTL, resulting in the passivation of defects at the perovskite surface. Accordingly, a power conversion efficiency of 23.22% is achieved for PSCs with DMATFSI and LiTFSI co-doped spiro-OMeTAD. Moreover, benefiting from the improved ion migration barrier and hydrophobicity of the HTL, still retained nearly 80% of their initial power conversion efficiency after 36 days of exposure to ambient air.     

Symmetry-Breaking Induced Dipole Enhancement for Efficient Spiro-Type Hole Transporting Materials: Easy Synthesis with High Stability

Spiral cores are crucial for designing efficient hole transporting materials (HTMs) for perovskite solar cells (PSCs), owing to their no-planar 3D architecture, high thermal stability, good solubility, and beneficial solid-state morphology. A lack of facile synthetic procedures for the spiral core limited the development of novel and stable spiral HTMs. In this regard, a one-step reaction is adopted to produce several novel acceptor-embedded spiral cores containing electron-withdrawing carbonyl group embedded orthogonal spiral conformation. After coupling with triphenylamine donors, symmetry-breaking spiral HTMs with uneven charge distribution can be obtained, bearing the advantages of adjustable dipole moment and enhanced structural stability. A combined theoretical and experimental study shows that the HTM with a stronger dipole moment can easily adsorb on the surface of perovskite via electrostatic potential, and the closer distance promoted facile hole transfer from perovskite to HTMs. In the end, PSCs based on strongly polarized spiro-BC-OMe achieved efficient hole extraction and thus an improved fill factor, promoting a power conversion efficiency (PCE) of 22.15%, and a module-based PCE of 18.61% with an active area of 16.38 cm². This study provides a new avenue for designing HTMs with strong dipole moments for efficient PSCs.     

Methodologies toward Highly Efficient Perovskite Solar Cells

A perovskite solar cell (PSC) employing an organic–inorganic lead halide perovskite light harvester, seeded in 2009 with power conversion efficiency (PCE) of 3.8% and grown in 2011 with PCE of 6.5% in dye‐sensitized solar cell structure, has received great attention since the breakthrough reports ≈10% efficient solid‐state PCSs demonstrating 500 h stability. Developments of device layout and high‐quality perovskite film eventually lead to a PCE over 22%. As of October 31, 2017, the highest PCE of 22.7% is listed in an efficiency chart provided by NREL. In this Review, the methodologies to obtain highly efficient PSCs are described in detail. In order to achieve a PCE of over 20% reproducibly, key technologies are disclosed from the viewpoint of precursor solution chemistry, processing for defect‐free perovskite films, and passivation of grain boundaries. Understanding chemical species in precursor solution, crystal growth kinetics, light–matter interaction, and controlling defects is expected to give important insights into not only reproducible production of high PCE over 20% but also further enhancement of the PCE of PCSs.     

Advances in cesium lead iodide perovskite solar cells: Processing science matters

The prevailing perovskite solar cells (PSCs) employ hybrid organic–inorganic halide perovskites as light absorbers, but these materials exhibit relatively poor environmental stability, which potentially hinders the practical deployment of PSCs. One important strategy to address this issue is replacing the volatile and hygroscopic organic cations with inorganic cesium cations in the crystal structure, forming all-inorganic halide perovskites. In this context, CsPbI₃ perovskite is drawing phenomenal attention, primarily because it exhibits an ideal bandgap of 1.7 eV for the use in tandem solar cells, and it shows significantly enhanced thermal stability that is the key to the long-term device operation. Within only half a decade, the power conversion efficiency (PCE) of CsPbI₃ PSCs has ramped beyond 20%, which has been driven by inventions of numerous processing methods for high-quality CsPbI₃ perovskite thin films. These methods are broadly classified into three categories: vapor deposition, nanocrystals assembly, and solution deposition. Herein we present a systematic review on these methods and related materials sciences. In particular, we comprehensively discuss the dimethylammonium-additive-based solution deposition, which has resulted into the best-performing CsPbI₃ PSCs. We also present the challenges and prospects on future research towards the realization of the full potential of CsPbI₃ PSCs.