Free‐Standing Polyurethane Nanofiber/Nets Air Filters for Effective PM Capture

The filtration performance and light transmittance of nanofiber air filters are restricted by their thick fiber diameter, large pore size, and substrate dependence, which can be solved by constructing substrate‐free fibrous membranes with true nanoscale diameters and ultrathin thicknesses, however, it has proven to be extremely challenging. Herein, a roust approach is presented to create free‐standing polyurethane (PU) nanofiber/nets air filters composed of bonded nanofibers and 2D nanonets for particular matter (PM) capture via combining electrospinning/netting technique and facile peel off process from designed substrates. This strategy causes widely distributed Steiner‐tree structured nanonets with diameters of ≈20 nm and bonded scaffold nanofibers to assemble into ultrathin membranes with small pore size, high porosity, and robust mechanical strength on a large scale based on ionic liquid inspiration and surface structure optimization of receiver substrates. As a consequence, the resulting free‐standing PU nanofiber/nets filters exhibit high PM_1–0.5 removal efficiency of >99.00% and PM_2.5–1 removal efficiency of >99.73%, maintaining high light transmittance of ≈70% and low pressure drop of 28 Pa; even achieve >99.97% removal efficiency with ≈40% transmittance for PM_0.3 filtration, and robust purification capacity for real smoke PM_2.5, making them promising high‐efficiency and transparent filtration materials for various filtration and separation applications.     

“Quasi‐freestanding” Graphene‐on‐Single Walled Carbon Nanotube Electrode for Applications in Organic Light‐emitting Diode

An air‐stable transparent conductive film with “quasi‐freestanding” graphene supported on horizontal single walled carbon nanotubes (SWCNTs) arrays is fabricated. The sheet resistance of graphene films stacked via layer‐by‐layer transfer (LBL) on quartz, and modified by 1‐Pyrenebutyric acid N‐hydroxysuccinimide ester (PBASE), is reduced from 273 Ω/sq to about 76 Ω/sq. The electrical properties are stable to heat treatment (up to 200 ºC) and ambient exposure. Organic light‐emitting diodes (OLEDs) constructed of this carbon anode (T ≈ 89.13% at 550 nm) exhibit ≈88% power efficiency of OLEDs fabricated on an ITO anode (low turn on voltage ≈3.1 eV, high luminance up to ≈29 490 cd/m², current efficiency ≈14.7 cd/A). Most importantly, the entire graphene‐on‐SWCNT hybrid electrodes can be transferred onto plastic (PET) forming a highly‐flexible OLED device, which continues to function without degradation in performance at bending angles >60°.     

Near‐Infrared Photodetectors Based on MoTe2/Graphene Heterostructure with High Responsivity and Flexibility

2D transition metal dichalcogenides (TMDCs) have attracted considerable attention due to their impressively high performance in optoelectronic devices. However, efficient infrared (IR) photodetection has been significantly hampered because the absorption wavelength range of most TMDCs lies in the visible spectrum. In this regard, semiconducting 2D MoTe₂ can be an alternative choice owing to its smaller band gap ≈1 eV from bulk to monolayer and high carrier mobility. Here, a MoTe₂/graphene heterostructure photodetector is demonstrated for efficient near‐infrared (NIR) light detection. The devices achieve a high responsivity of ≈970.82 A W^?1 (at 1064 nm) and broadband photodetection (visible‐1064 nm). Because of the effective photogating effect induced by electrons trapped in the localized states of MoTe₂, the devices demonstrate an extremely high photoconductive gain of 4.69 × 10⁸ and detectivity of 1.55 × 10¹¹ cm Hz^1/2 W^?1. Moreover, flexible devices based on the MoTe₂/graphene heterostructure on flexible substrate also retains a good photodetection ability after thousands of times bending test (1.2% tensile strain), with a high responsivity of ≈60 A W^?1 at 1064 nm at V _DS = 1 V, which provides a promising platform for highly efficient, flexible, and low cost broadband NIR photodetectors.     

A Novel Design of Multi‐Mechanoresponsive and Mechanically Strong Hydrogels

A newly developed polyacrylamide‐co ‐methyl acrylate/spiropyran (SP) hydrogel crosslinked by SP mechanophore demonstrates multi‐stimuli‐responsive and mechanically strong properties. The hydrogels not only exhibit thermo‐, photo‐, and mechano‐induced color changes, but also achieve super‐strong mechanical properties (tensile stress of 1.45 MPa, tensile strain of ≈600%, and fracture energy of 7300 J m^?2). Due to a reversible structural transformation between spiropyran (a ring‐close) and merocyanine (a ring‐open) states, simple exposure of the hydrogels to white light can reverse color changes and restore mechanical properties. The new design approach for a new mechanoresponsive hydrogel is easily transformative to the development of other mechanophore‐based hydrogels for sensing, imaging, and display applications.     

Charged Layered Boron Nitride‐Nanoflake Membranes for Efficient Ion Separation and Water Purification

2D layered nanomaterials have attracted considerable attention for their potential for highly efficient separations, among other applications. Here, a 2D lamellar membrane synthesized using hexagonal boron nitride nanoflakes (h‐BNF) for highly efficient ion separation is reported. The ion‐rejection performance and the water permeance of the membrane as a function of the ionic radius, ion valance, and solution pH are investigated. The nonfunctionalized h‐BNF membranes show excellent ion rejection for small sized salt ions as well as for anionic dyes (>97%) while maintaining a high water permeability, ≈1.0 × 10^?3 L m m^?2 h^?1 bar^?1). Experiments show that the ion‐rejection performance of the membrane can be tuned by changing the solution pH. The results also suggest that the rejection is influenced by the ionic size and the electrostatic repulsion between fixed negative charges on the BN surface and the mobile ions, and is consistent with the Donnan equilibrium model. These simple‐to‐fabricate h‐BNF membranes show a unique combination of excellent ion selectivity and high permeability compared to other 2D membranes.     

Quantum-Confinement-Enhanced Thermoelectric Properties in Modulation-Doped GaAs–AlGaAs Core–Shell Nanowires

Nanowires (NWs) hold great potential in advanced thermoelectrics due to their reduced dimensions and low-dimensional electronic character. However, unfavorable links between electrical and thermal conductivity in state-of-the-art unpassivated NWs have, so far, prevented the full exploitation of their distinct advantages. A promising model system for a surface-passivated one-dimensional (1D)-quantum confined NW thermoelectric is developed that enables simultaneously the observation of enhanced thermopower via quantum oscillations in the thermoelectric transport and a strong reduction in thermal conductivity induced by the core–shell heterostructure. High-mobility modulation-doped GaAs/AlGaAs core–shell NWs with thin (sub-40 nm) GaAs NW core channel are employed, where the electrical and thermoelectric transport is characterized on the same exact 1D-channel. 1D-sub-band transport at low temperature is verified by a discrete stepwise increase in the conductance, which coincided with strong oscillations in the corresponding Seebeck voltage that decay with increasing sub-band number. Peak Seebeck coefficients as high as ≈65–85 µV K⁻¹ are observed for the lowest sub-bands, resulting in equivalent thermopower of S²σ ≈ 60 µW m⁻¹ K⁻² and S²G ≈ 0.06 pW K⁻² within a single sub-band. Remarkably, these core–shell NW heterostructures also exhibit thermal conductivities as low as ≈3 W m⁻¹ K⁻¹, about one order of magnitude lower than state-of-the-art unpassivated GaAs NWs.     

Self‐Healing Proton‐Exchange Membranes Composed of Nafion–Poly(vinyl alcohol) Complexes for Durable Direct Methanol Fuel Cells

Proton‐exchange membranes (PEMs) that can heal mechanical damage to restore original functions are important for the fabrication of durable and reliable direct methanol fuel cells (DMFCs). The fabrication of healable PEMs that exhibit satisfactory mechanical stability, enhanced proton conductivity, and suppressed methanol permeability via hydrogen‐bonding complexation between Nafion and poly(vinyl alcohol) (PVA) followed by postmodification with 4‐carboxybenzaldehyde (CBA) molecules is presented. Compared with pure Nafion, the CBA/Nafion–PVA membranes exhibit enhanced mechanical properties with an ultimate tensile strength of ≈20.3 MPa and strain of ≈380%. The CBA/Nafion–PVA membrane shows a proton conductivity of 0.11 S cm^?1 at 80 °C, which is 1.2‐fold higher than that of a Nafion membrane. The incorporated PVA gives the CBA/Nafion–PVA membranes excellent proton conductivity and methanol resistance. The resulting CBA/Nafion–PVA membranes are capable of healing mechanical damage of several tens of micrometers in size and restoring their original proton conductivity and methanol resistance under the working conditions of DMFCs. The healing property originates from the reversibility of hydrogen‐bonding interactions between Nafion and CBA‐modified PVA and the high chain mobility of Nafion and CBA‐modified PVA.     

Ultrahigh Responsivity UV Photodetector Based on Cu Nanostructure/ZnO QD Hybrid Architectures

Strong near‐surface electromagnetic field formed by collective oscillation of electrons on Cu nanostructure a shows a strong dependence on geometry, offering a promising approach to boost the light absorption of ZnO photoactive layers with enhanced plasmon scattering. Here, a facile way to fabricate UV photodetectors with tunable configuration of the self‐assembled Cu nanostructures on ZnO thin films is reported. The incident lights are effectively confined in ZnO photoactive layers with the existence of the uplayer Cu nanostructures, and the interdiffusion of Cu atoms during fabrication of the Cu nanostructures can improve the carrier transfer in ZnO thin films. The optical properties of the hybrid architectures are successfully tailored over a control of the geometric evolution of the Cu nanostructures, resulting in significantly enhanced photocurrent and responsivity of 2.26 mA and 234 A W^?1 under a UV light illumination of 0.62 mW cm^?2 at 10 V, respectively. The photodetectors also exhibit excellent reproducibility, stability, and UV–visible rejection ratio (R_{370 nm}/R_{500 nm}) of ≈370, offering an approach of high‐performance UV photodetectors for practical applications.     

Simultaneous Piezoelectrocatalytic Hydrogen-Evolution and Degradation of Water Pollutants by Quartz Microrods@Few-Layered MoS2 Hierarchical Heterostructures

Intense light attenuation in water/wastewater results in photocatalysts exhibiting a low quantum efficiency. This study develops a novel piezoelectrocatalysis system, which involves quartz microrods (MRs) abundantly decorated with active-edge-site MoS₂ nanosheets to form a quartz microrods@few-layered MoS₂ hierarchical heterostructure (QMSH). Through theoretical calculations, it is found that the quartz MRs serve as a parallel-plate capacitor, which is self-powered to provide an internal electric field to the few-layered MoS₂ nanosheets surrounding the quartz MR surfaces, and the piezoelectric potential (piezopotential) effectively facilitates redox reactions with the free carriers in MoS₂. The self-powered quartz MRs in the QMSH present an internal bias to the MoS₂ nanosheets, thus yielding a piezoelectrocatalysis system. An efficient piezoelectrocatalytic hydrogen evolution reaction and decomposition of wastewater without light irradiation can be achieved simultaneously. The second-order rate constant of the QMSH is ≈0.631 L mg⁻¹ min⁻¹, which is 650-fold that of quartz MRs, indicating that the piezoelectric heterostructural catalysts display exceptionally high efficiency on piezoelectrocatalytic redox reactions rather than in the piezocatalytic process. The H₂-production rate of QMSH catalysts approaches ≈6456 µmo1 g⁻¹ h⁻¹ and peaks at ≈16.8 mmol g⁻¹ in 8 h. The piezoelectrocatalytic process may be a promising method for treating industrial wastewater and producing clean energy.     

Roll‐to‐Roll Production of Layer‐Controlled Molybdenum Disulfide: A Platform for 2D Semiconductor‐Based Industrial Applications

A facile methodology for the large‐scale production of layer‐controlled MoS₂ layers on an inexpensive substrate involving a simple coating of single source precursor with subsequent roll‐to‐roll‐based thermal decomposition is developed. The resulting 50 cm long MoS₂ layers synthesized on Ni foils possess excellent long‐range uniformity and optimum stoichiometry. Moreover, this methodology is promising because it enables simple control of the number of MoS₂ layers by simply adjusting the concentration of (NH₄)₂MoS₄. Additionally, the capability of the MoS₂ for practical applications in electronic/optoelectronic devices and catalysts for hydrogen evolution reaction is verified. The MoS₂‐based field effect transistors exhibit unipolar n‐channel transistor behavior with electron mobility of 0.6 cm² V^?1 s^?1 and an on‐off ratio of ≈10³. The MoS₂‐based visible‐light photodetectors are fabricated in order to evaluate their photoelectrical properties, obtaining an 100% yield for active devices with significant photocurrents and extracted photoresponsivity of ≈22 mA W^?1. Moreover, the MoS₂ layers on Ni foils exhibit applicable catalytic activity with observed overpotential of ≈165 mV and a Tafel slope of 133 mV dec^?1. Based on these results, it is envisaged that the cost‐effective methodology will trigger actual industrial applications, as well as novel research related to 2D semiconductor‐based multifaceted applications.     

Highly Oriented Thin Films of 2D Ruddlesden‐Popper Hybrid Perovskite toward Superfast Response Photodetectors

2D hybrid perovskites have shown great promise in the photodetection field, due to their intriguing attributes stemming from unique structural architectures. However, the great majority of detectors based on this 2D system possess a relatively low response speed (≈ms), making it extremely urgent to develop new candidates for superfast photodetection. Here, a new organic–inorganic hybrid perovskite, (PA)₂(FA)Pb₂I₇ (EFA, where PA is n‐pentylaminium and FA is formamidine), which features the 2D Ruddlesden–Popper type perovskite framework that is composed of the corner‐sharing PbI₆ octahedra is reported. Significantly, photodetectors fabricated on highly oriented thin films, which exhibit a perfect orientation parallel to 2D inorganic perovskite layers, exhibit a superfast response time up to ≈2.54 ns. To the best of the knowledge, this figure‐of‐merit catches up with that of the top‐ranking commercial materials, and sets a new record for 2D hybrid perovskite photodetectors. Moreover, extremely high photodetectivity (≈1.73 × 10¹⁴ Jones, under an incident power intensity of ≈46 µW cm^?2), considerable switching ratios (>10³), and low dark current (≈10 pA) are also achieved in the detector, indicating its great potential for high‐efficiency photodetection. These results shed light on the possibilities to explore new 2D candidates for assembling future high‐performance optoelectronic devices.     

A Simple Route to Reduced Graphene Oxide‐Draped Nanocomposites with Markedly Enhanced Visible‐Light Photocatalytic Performance

Nanocomposites (denoted RGO/ZnONRA) comprising reduced graphene oxide (RGO) draped over the surface of zinc oxide nanorod array (ZnONRA) were produced via a simple low‐temperature route, dispensing with the need for hydrothermal growth, electrochemical deposition or other complex treatments. The amount of deposited RGO can be readily tuned by controlling the concentration of graphene oxide (GO). Interestingly, the addition of Sn²⁺ not only enables the reduction of GO, but also functions as a bridge that connects the resulting RGO and ZnONRA. Remarkably, the incorporation of RGO improves the visible‐light absorption and reduces the bandgap of ZnO, thereby leading to the markedly improved visible‐light photocatalytic performance. Moreover, RGO/ZnONRA nanocomposites exhibit a superior stability as a result of the surface protection of ZnONRA by RGO. The mechanism on the improved photocatalytic performance based on the cophotosensitizations under the visible‐light irradiation has been proposed. This simple yet effective route to the RGO‐decorated semiconductor nanocomposites renders the better visible‐light utilization, which may offer great potential for use in photocatalytic degradation of organic pollutants, solar cells, and optoelectronic materials and devices.     

Novel UV–Visible Photodetector in Photovoltaic Mode with Fast Response and Ultrahigh Photosensitivity Employing Se/TiO2 Nanotubes Heterojunction

A feasible strategy for hybrid photodetector by integrating an array of self‐ordered TiO₂ nanotubes (NTs) and selenium is demonstrated to break the compromise between the responsivity and response speed. Novel heterojunction between the TiO₂ NTs and Se in combination with the surface trap states at TiO₂ help regulate the electron transport and facilitate the separation of photogenerated electron–hole pairs under photovoltaic mode (at zero bias), leading to a high responsivity of ≈100 mA W^?1 at 620 nm light illumination and the ultrashort rise/decay time (1.4/7.8 ms). The implanting of intrinsic p‐type Se into TiO₂ NTs broadens the detection range to UV–visible (280–700 nm) with a large detectivity of over 10¹² Jones and a high linear dynamic range of over 80 dB. In addition, a maximum photocurrent of ≈10⁷ A is achieved at 450 nm light illumination and an ultrahigh photosensitivity (on/off ratio up to 10⁴) under zero bias upon UV and visible light illumination is readily achieved. The concept of employing novel heterojunction geometry holds great potential to pave a new way to realize high performance and energy‐efficient optoelectronic devices for practical applications.     

New intelligent multifunctional SiO2/VO2 composite films with enhanced infrared light regulation performance,solar modulation capability,and superhydrophobicity

Abstract

Highly transparent, energy-saving, and superhydrophobic nanostructured SiO₂/VO₂ composite films have been fabricated using a sol–gel method. These composite films are composed of an underlying infrared (IR)-regulating VO₂ layer and a top protective layer that consists of SiO₂ nanoparticles. Experimental results showed that the composite structure could enhance the IR light regulation performance, solar modulation capability, and hydrophobicity of the pristine VO₂ layer. The transmittance of the composite films in visible region (T_lum) was higher than 60%, which was sufficient to meet the requirements of glass lighting. Compared with pristine VO₂ films and tungsten-doped VO₂ film, the near IR control capability of the composite films was enhanced by 13.9% and 22.1%, respectively, whereas their solar modulation capability was enhanced by 10.9% and 22.9%, respectively. The water contact angles of the SiO₂/VO₂ composite films were over 150°, indicating superhydrophobicity. The transparent superhydrophobic surface exhibited a high stability toward illumination as all the films retained their initial superhydrophobicity even after exposure to 365 nm light with an intensity of 160 mW^.cm^?2 for 10 h. In addition, the films possessed anti-oxidation and anti-acid properties. These characteristics are highly advantageous for intelligent windows or solar cell applications, given that they can provide surfaces with anti-fogging, rainproofing, and self-cleaning effects. Our technique offers a simple and low-cost solution to the development of stable and visible light transparent superhydrophobic surfaces for industrial applications.     

Photoresponsive Smart Coloration Electrochromic Supercapacitor

Electrochromic devices have been widely adopted in energy saving applications by taking advantage of the electrode coloration, but it is critical to develop a new electrochromic device that can undergo smart coloration and can have a wide spectrum in transmittance in response to input light intensity while also functioning as a rechargeable energy storage system. In this study, a photoresponsive electrochromic supercapacitor based on cellulose‐nanofiber/Ag‐nanowire/reduced‐graphene‐oxide/WO₃‐composite electrode that is capable of undergoing “smart” reversible coloration while simultaneously functioning as a reliable energy‐storage device is developed. The fabricated device exhibits a high coloration efficiency of 64.8 cm² C^?1 and electrochemical performance with specific capacitance of 406.0 F g^?1, energy/power densities of 40.6–47.8 Wh kg^?1 and 6.8–16.9 kW kg^?1. The electrochromic supercapacitor exhibits excellent cycle reliability, where 75.0% and 94.1% of its coloration efficiency and electrochemical performance is retained, respectively, beyond 10 000 charge–discharge cycles. Cyclic fatigue tests show that the developed device is mechanically durable and suitable for wearable electronics applications. The smart electrochromic supercapacitor system is then integrated with a solar sensor to enable photoresponsive coloration where the transmittance changes in response to varying light intensity.     

Solution Processable 1D Fullerene C60 Crystals for Visible Spectrum Photodetectors

Visible spectrum photodetector devices fabricated using molecular crystals of carbon C₆₀ are reported. The devices operate efficiently, extending over and beyond the full visible light spectrum (300–710 nm) with a bias voltage tunable responsivity of 4 mA–0.5 mA W^?1. Across this range of wavelengths, the noise equivalent power of these devices remains below 10² nW Hz^?1/2, providing a detectivity of 10⁷ Jones. The noise current in these devices is found to have a strong dependence on both bias voltage and frequency, varying by 4 orders of magnitude from 1 nA Hz^?1/2 to 0.1 pA Hz^?1/2. The devices also display a near‐linear dependence of photocurrent on light intensity over 4 orders of magnitude, providing a dynamic range approaching 80 dB. The 3 dB bandwidth of the devices is found to be above 10² Hz, while the 18 dB bandwidth exceeds 1 kHz. The transient photocurrents of the devices have a rise time of ≈50 µs and a long fall time of ≈4 ms. The spectral photocurrent of the devices is found to quench gradually with a reduction in temperature from ≈300 K and is fully quenched at temperatures below T ≈ 100 K. Upon reheating, the device performance is fully recovered.     

One-step fabrication of soot particle-embedded fibrous membranes for solar distillation using candle burning-assisted electrospinning

Solar distillation, a promising technique for water purification and desalination, requires photothermal materials to efficiently convert solar energy into heat. In this study, a novel method is proposed wherein fresh carbonaceous (soot) particles, as a photothermal material, are embedded into electrospun fibrous membranes by burning candles (to produce soot) and electrospinning of polymer material simultaneously. The proposed method can produce several types of membranes with various particle positions (interior or exterior) in the polymer fiber. The particle positions were adjusted by changing the introduction points of particles using a polymer jet. Polymer fibers with diameters of several hundred nanometers were fabricated. Experiments revealed that the soot particle position did not influence the photothermal conversion performance of the membranes. The fabricated membrane could improve the heat localization up to 194.5% and exhibited water distillation and desalination rates as high as 1.60 and 1.55 kg m⁻²h⁻¹, respectively, under 1-sun solar light irradiation. The proposed method opens a new route for the functionalization of polymer membranes.     

Graphdiyne-hybridized N-doped TiO<Subscript>2</Subscript> nanosheets for enhanced visible light photocatalytic activity

In this study, graphdiyne (GD)-hybridized nitrogen-doped TiO₂ nanosheets with exposed (001) facets (GD-NTNS) have been prepared via a hydrothermal reaction and utilized as photocatalyst for the photodegradation of rhodamine B (RhB) under visible light illumination. The resultant GD-NTNS composites exhibit superior visible light photocatalytic activity than that of the bare TiO₂ nanosheets (TNS) and nitrogen-doped TiO₂ nanosheets (NTNS). The enhanced photoactivity can be attributed to the synergistic effects of GD and nitrogen doping with efficient electron transfer and strong visible light absorption. It has been revealed that ^·O^2? and h⁺ are the major species for the enhanced photoactivity under visible light. Our work will facilitate the potential for future design of hybrid materials for practical applications beyond photocatalysts.     

Thermal Conductivity Measurement of Anisotropic Biological Tissue In Vitro

The accurate determination of the thermal conductivity of biological tissues has implications on the success of cryosurgical/hyperthermia treatments. In light of the evident anisotropy in some biological tissues, a new modified stepwise transient method was proposed to simultaneously measure the transverse and longitudinal thermal conductivities of anisotropic biological tissues. The physical and mathematical models were established, and the analytical solution was derived. Sensitivity analysis and experimental simulation were performed to determine the feasibility and measurement accuracy of simultaneously measuring the transverse and longitudinal thermal conductivities. The experimental system was set up, and its measurement accuracy was verified by measuring the thermal conductivity of a reference standard material. The thermal conductivities of the pork tenderloin and bovine muscles were measured using the traditional 1D and proposed methods, respectively, at different temperatures. Results indicate that the thermal conductivities of the bovine muscle are lower than those of the pork tenderloin muscle, whereas the bovine muscle was determined to exhibit stronger anisotropy than the pork tenderloin muscle. Moreover, the longitudinal thermal conductivity is larger than the transverse thermal conductivity for the two tissues and all thermal conductivities increase with the increase in temperature. Compared with the traditional 1D method, results obtained by the proposed method are slightly higher although the relative deviation is below 5 %.     

Efficient Red Perovskite Light‐Emitting Diodes Based on Solution‐Processed Multiple Quantum Wells

This paper reports a facile and scalable process to achieve high performance red perovskite light‐emitting diodes (LEDs) by introducing inorganic Cs into multiple quantum well (MQW) perovskites. The MQW structure facilitates the formation of cubic CsPbI₃ perovskites at low temperature, enabling the Cs‐based QWs to provide pure and stable red electroluminescence. The versatile synthesis of MQW perovskites provides freedom to control the crystallinity and morphology of the emission layer. It is demonstrated that the inclusion of chloride can further improve the crystallization and consequently the optical properties of the Cs‐based MQW perovskites, inducing a low turn‐on voltage of 2.0 V, a maximum external quantum efficiency of 3.7%, a luminance of ≈440 cd m^?2 at 4.0 V. These results suggest that the Cs‐based MQW LED is among the best performing red perovskite LEDs. Moreover, the LED device demonstrates a record lifetime of over 5 h under a constant current density of 10 mA cm^?2. This work suggests that the MQW perovskites is a promising platform for achieving high performance visible‐range electroluminescence emission through high‐throughput processing methods, which is attractive for low‐cost lighting and display applications.