Metal–Organic Framework Materials for the Separation and Purification of Light Hydrocarbons

The separation and purification of light hydrocarbons (LHs) mixtures is one of the most significantly important but energy demanding processes in the petrochemical industry. As an alternative technology to energy intensive traditional separation methods, such as distillation, absorption, extraction, etc., adsorptive separation using selective solid adsorbents could potentially not only lower energy cost but also offer higher efficiency. The need to develop solid materials for the efficiently selective adsorption of LHs molecules, under mild conditions, is therefore of paramount importance and urgency. Metal–organic frameworks (MOFs), emerging as a relatively new class of porous organic–inorganic hybrid materials, have shown promise for addressing this challenging task due to their unparalleled features. Herein, recent advances of using MOFs as separating agents for the separation and purification of LHs, including the purification of CH₄, and the separations of alkynes/alkenes, alkanes/alkenes, C₅–C₆–C₇ normal/isoalkanes, and C₈ alkylaromatics, are summarized. The relationships among the structural and compositional features of the newly synthesized MOF materials and their separation properties and mechanisms are highlighted. Finally, the existing challenges and possible research directions related to the further exploration of porous MOFs in this very active field are also discussed.     

Metal–Organic Framework-Based Sulfur-Loaded Materials

Lithium-sulfur batteries(LSBs) are considered promising new energy storage systems given their outstanding theoretical energy densities. Nevertheless,issues such as low electrical conductivity and severe volume expansion, along with the formation of polysulfides during cycling, restrict their practical applications. To overcome these issues, it is necessary to find suitable and effective sulfur host materials. Metal–organic frameworks(MOFs), which are porous crystalline materials in the bourgeon...     

Metal–Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal–organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.     

Sintering Metal–Organic Framework Gels for Application as Structural Adhesives

Metal–organic frameworks (MOFs)/coordination polymers are promising materials for gas separation, fuel storage, catalysis, and biopharmaceuticals. However, most applied research on MOFs is limited to these functional materials thus far. This study focuses on the potential of MOFs as structural adhesives. A sintering technique is applied to a zeolitic imidazolate framework-67 (ZIF-67) gel that enables the joining of Cu substrates, resulting in a shear strength of over 30 MPa, which is comparable to that of conventional structural adhesives. Additionally, systematic experiments are performed to evaluate the effects of temperature and pressure on adhesion, indicating that the removal of excess 2-methylimidazole and the by-product (acetic acid) from the sintered material by vaporization results in a microstructure composed of large spherical ZIF-67 crystals that are densely aggregated, which is essential for achieving a high shear strength.     

Demonstration of a Broadband Photodetector Based on a Two-Dimensional Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging as an appealing class of highly tailorable electrically conducting materials with potential applications in optoelectronics. Yet, the realization of their proof-of-concept devices remains a daunting challenge, attributed to their poor electrical properties. Following recent work on a semiconducting Fe₃(THT)₂(NH₄)₃ (THT: 2,3,6,7,10,11-triphenylenehexathiol) 2D MOF with record-high mobility and band-like charge transport, here, an Fe₃(THT)₂(NH₄)₃ MOF-based photodetector operating in photoconductive mode capable of detecting a broad wavelength range from UV to NIR (400–1575 nm) is demonstrated. The narrow IR bandgap of the active layer (≈0.45 eV) constrains the performance of the photodetector at room temperature by band-to-band thermal excitation of charge carriers. At 77 K, the device performance is significantly improved; two orders of magnitude higher voltage responsivity, lower noise equivalent power, and higher specific detectivity of 7 × 10⁸ cm Hz^1/2 W⁻¹ are achieved under 785 nm excitation. These figures of merit are retained over the analyzed spectral region (400–1575 nm) and are commensurate to those obtained with the first demonstrations of graphene- and black-phosphorus-based photodetectors. This work demonstrates the feasibility of integrating conjugated MOFs as an active element into broadband photodetectors, thus bridging the gap between materials' synthesis and technological applications.     

A Self-Templated Design Approach toward Multivariate Metal–Organic Frameworks for Enhanced Oxygen Evolution

Multivariate metal–organic framework (MOF) is an ideal electrocatalytic material due to the synergistic effect of multiple metal active sites. In this study, a series of ternary M-NiMOF (M = Co, Cu) through a simple self-templated strategy that the Co/Cu MOF isomorphically grows in situ on the surface of NiMOF is designed. Owing to the electron rearrange of adjacent metals, the ternary CoCu-NiMOFs demonstrate the improved intrinsic electrocatalytic activity. At optimized conditions, the ternary Co₃Cu-Ni₂MOFs nanosheets give the excellent oxygen evolution reaction (OER) performance of current density of 10 mA cm⁻² at low overpotential of 288 mV with a Tafel slope of 87 mV dec⁻¹, which is superior to that of bimetallic nanosheet and ternary microflowers. The low free energy change of potential-determining step identifies that the OER process is favorable at Cu–Co concerted sites along with strong synergistic effect of Ni nodes. Partially oxidized metal sites also reduce the electron density, thus accelerating the OER catalytic rate. The self-templated strategy provides a universal tool to design multivariate MOF electrocatalysts for highly efficient energy transduction.     

Decoupled Solar Energy Storage and Dark Photocatalysis in a 3D Metal–Organic Framework

Materials enabling solar energy conversion and long-term storage for readily available electrical and chemical energy are key for off-grid energy distribution. Herein, the specific confinement of a rhenium coordination complex in a metal–organic framework (MOF) unlocks a unique electron accumulating property under visible-light irradiation. About 15 C g_MOF⁻¹ of electric charges can be concentrated and stored for over four weeks without loss. Decoupled, on-demand discharge for electrochemical reactions and H₂ evolution catalysis is shown and light-driven recharging can be conducted for >10 cycles with ≈90% of the initial charging capacity retained. Experimental investigations and theoretical calculations link electron trapping to MOF-induced geometry constraints as well as the coordination environment of the Re-center, highlighting the key role of MOF confinement on molecular guests. This study serves as the seminal report on 3D porous colloids achieving photoaccumulation of long-lived electrons, unlocking dark photocatalysis, and a path toward solar capacitor and solar battery systems.     

A Metal–Organic Framework as a Multifunctional Ionic Sieve Membrane for Long-Life Aqueous Zinc–Iodide Batteries

The introduction of the redox couple of triiodide/iodide (I₃⁻/I⁻) into aqueous rechargeable zinc batteries is a promising energy-storage resource owing to its safety and cost-effectiveness. Nevertheless, the limited lifespan of zinc–iodine (Zn–I₂) batteries is currently far from satisfactory owing to the uncontrolled shuttling of triiodide and unfavorable side-reactions on the Zn anode. Herein, space-resolution Raman and micro-IR spectroscopies reveal that the Zn anode suffers from corrosion induced by both water and iodine species. Then, a metal–organic framework (MOF) is exploited as an ionic sieve membrane to simultaneously resolve these problems for Zn–I₂ batteries. The multifunctional MOF membrane, first, suppresses the shuttling of I₃⁻ and restrains related parasitic side-reaction on the Zn anode. Furthermore, by regulating the electrolyte solvation structure, the MOF channels construct a unique electrolyte structure (more aggregative ion associations than in saturated electrolyte). With the concurrent improvement on both the iodine cathode and the Zn anode, Zn–I₂ batteries achieve an ultralong lifespan (>6000 cycles), high capacity retention (84.6%), and high reversibility (Coulombic efficiency: 99.65%). This work not only systematically reveals the parasitic influence of free water and iodine species to the Zn anode, but also provides an efficient strategy to develop long-life aqueous Zn–I₂ batteries.     

Heterojunction Incorporating Perovskite and Microporous Metal–Organic Framework Nanocrystals for Efficient and Stable Solar Cells

In this paper,we present a facile approach to enhance the efficiency and stability of perovskite solar cells(PSCs)by incorporating perovskite with microporous indium-based metal–organic framework[In12O(OH)16(H2O)5(btc)6]n(In-BTC)nanocrystals and forming heterojunction light-harvesting layer.The interconnected micropores and terminal oxygen sites of In-BTC allow the preferential crystallization of perovskite inside the regular cavities,endowing the derived films with improved morphology/crystallinity and reduced grain boundaries/defects.Consequently,the In-BTC-modified PSC yields enhanced fill factor of 0.79 and power conversion efficiency(PCE)of 20.87%,surpassing the pristine device(0.76 and 19.52%,respectively).More importantly,over 80%of the original PCE is retained after 12 days of exposure to ambient environment(25°C and relative humidity of^65%)without encapsulation,while only about 35%is left to the pristine device.     

Switchable Xe/Kr Selectivity in a Hofmann-Type Metal–Organic Framework via Temperature-Responsive Rotational Dynamics

The development of adsorbents for Kr and Xe separation is essential to meet industrial demands and for energy conservation. Although a number of previous studies have focused on Xe-selective adsorbents, stimuli-responsive Xe/Kr-selective adsorbents still remain underdeveloped. Herein, a Hofmann-type framework Co(DABCO)[Ni(CN)₄] (referred to as CoNi-DAB ; DABCO = 1,4-diazabicyclo[2,2,2]octane) that provides a temperature-dependent switchable Xe/Kr separation performance is reported. CoNi-DAB showed high Kr/Xe (0.8/0.2) selectivity with significant Kr adsorption at 195 K as well as high Xe/Kr (0.2/0.8) selectivity with superior Xe adsorption at 298 K. Such adsorption features are associated with the temperature-dependent rotational configuration of the DABCO ligand, which affects the kinetic gate-opening temperature of Xe and Kr. The packing densities of Xe (2.886 g cm⁻³ at 298 K) and Kr (2.399 g  cm⁻³ at 195 K) inside the framework are remarkable and comparable with those of liquid Xe (3.057 g cm⁻³) and liquid Kr (2.413 g cm⁻³), respectively. Breakthrough experiments confirm the temperature-dependent reverse separation performance of CoNi-DAB at 298 K under dry and wet (88% relative humidity) conditions and at 195 K under dry conditions. The unique adsorption behavior is also verified through van der Waals (vdW)-corrected density functional theory (DFT) calculations and nudged elastic band (NEB) simulations.     

Regulating Crystallization and Lead Leakage of Perovskite Solar Cell Via Novel Polyoxometalate-Based Metal–Organic Framework

Despite the unprecedented progress in lead-based perovskite solar cells (PSCs), the toxicity and leakage of lead from degraded PSCs triggered by deep-level defects and poor crystallization quality increase environmental risk and become a critical challenge for eco-friendly PSCs. Here, a novel 2D polyoxometalate (POM)-based metal–organic framework (MOF) (C₅NH₅)₄(C₃N₂H₅)₂Zn₃(H₈P₄Mo₆O₃₁)₂·2H₂O (POMOF) is ingeniously devised to address these issues. Note that the integration of POM endows POMOF with great advantages of electrical conductivity and charge mobility. Ordered POMOF induces the crystallization of high-quality perovskite film and eliminates lead-based defects to improve internal stability. The resultant PSCs achieve a superior power conversion efficiency (23.3%) accompanied by improved stability that maintains ≈90% of its original efficiency after 1600 h. Meanwhile, POMOF with phosphate groups effectively prevents lead leakage through in situ chemical anchoring and adsorption methods to reduce environmental risk. This work provides an effective strategy to minimize lead-based defects and leakage in sustainable PSCs through multi-functional POM-based MOF material.     

Structure Engineering of a Lanthanide-Based Metal–Organic Framework for the Regulation of Dynamic Ranges and Sensitivities for Pheochromocytoma Diagnosis

Exploring innovative technologies to precisely quantify biomolecules is crucial but remains a great challenge for disease diagnosis. Unfortunately, the humoral concentrations of most biotargets generally vary within rather limited scopes between normal and pathological states, while most literature-reported biosensors can detect large spans of targets concentrations, but are less sensitive to small concentration changes, which consequently make them mostly unsatisfactory or even unreliable in distinguishing positives from negatives. Herein, a novel strategy of precisely quantifying the small concentration changes of a certain biotarget by editing the dynamic ranges and sensitivities of a lanthanide-based metal–organic framework (Eu-ZnMOF) biosensor is reported. By elaborately tailoring the biosensor's structure and surface areas, the tunable Eu-ZnMOF is developed with remarkably enhanced response slope within the “optimized useful detection window,” enabling it to serve as a powerful signal amplifier (87.2-fold increase) for discriminating the small concentration variation of urinary vanillylmandelic acid (an early pathological signature of pheochromocytoma) within only three times between healthy and diseased subjects. This study provides a facile approach to edit the biosensors' performances through structure engineering, and exhibits promising perspectives for future clinical application in the non-invasive and accurate diagnosis of severe diseases.     

Fundamental Perspectives on the Electrochemical Water Applications of Metal–Organic Frameworks

Metal–organic frameworks(MOFs), a family of highly porous materials possessing huge surface areas and feasible chemical tunability, are emerging as critical functional materials to solve the growing challenges associated with energy–water systems, such as water scarcity issues. In this contribution, the roles of MOFs are highlighted in electrochemical-based water applications(i.e., reactions, sensing, and separations), where MOF-based functional materials exhibit outstanding performances in dete...     

Metal–Organic Frameworks-Based Nanoplatforms for the Theranostic Applications of Neurological Diseases

Neurological diseases are the foremost cause of disability and the second leading cause of death worldwide. Owing to the special microenvironment of neural tissues and biological characteristics of neural cells, a considerable number of neurological disorders are currently incurable. In the past few years, the development of nanoplatforms based on metal–organic frameworks (MOFs) has broadened opportunities for offering sensitive diagnosis/monitoring and effective therapy of neurology-related diseases. In this article, the obstacles for neurotherapeutics, including delayed diagnosis and misdiagnosis, the existence of blood brain barrier (BBB), off-target treatment, irrepressible inflammatory storm/oxidative stress, and irreversible nerve cell death are summarized. Correspondingly, MOFs-based diagnostic/monitoring strategies such as neuroimaging and biosensors (electrochemistry, fluorometry, colorimetry, electrochemiluminescence, etc.) and MOFs-based therapeutic strategies including higher BBB permeability, targeting specific lesion sites, attenuation of neuroinflammation/oxidative stress as well as regeneration of nerve cells, are extensively highlighted for the management of neurological diseases. Finally, the challenges of the present research from perspective of clinical translation are discussed, hoping to facilitate interdisciplinary studies at the intersections between MOFs-based nanoplatforms and neurotheranostics.     

Multicenter Metal–Organic Framework-Based Ratiometric Fluorescent Sensors

Metal–organic frameworks (MOFs) with multiple emission centers are newly emerging as ratiometric sensors owing to their high sensitivity and high selectivity toward a wide range of targeted functional species. Energy transfer between the light-absorbing group and emission centers and between different emission centers is the key to rationally design and synthesize MOF-based ratiometric sensors. A good match between the energy levels of the light-absorbing groups and emission centers is the prerequisite for MOF-based sensors to exhibit multiple emissions, and a good match of the MOF-based sensors and those of the targeted species can increase the sensitivity and selectivity, but this match is highly challenging to obtain via synthesis. MOFs with multiple emission centers can be produced by functionalizing MOFs with multiple lanthanide centers, organic luminophores, dyes, carbon dots, and other such emissive groups. In this progress report, recent advances in the strategies for synthesizing MOFs with multiple emission centers and their applications for ratiometric sensing of solution conditions, including the pH value, and ion, organic molecule, and biomolecule concentrations, are summarized, as are the related sensing mechanisms.     

Photoactive and Intrinsically Fuel Sensing Metal–Organic Framework Motors for Tailoring Collective Behaviors of Active-Passive Colloids

Microorganisms display nonequilibrium predator–prey behaviors, such as chasing–escaping and schooling via chemotactic interactions. Even though artificial systems have revealed such biomimetic behaviors, switching between them by control over chemotactic interactions is rare. Here, a spindle-like iron-based metal–organic framework (MOF) colloidal motor which self-propels in glucose and H₂O₂, triggered by UV light is reported. These motors display intrinsic UV light-triggered fuel-dependent chemotactic interactions, which are used to tailor the collective dynamics of active-passive colloidal mixtures. In particular, the mixtures of active MOF motors with passive colloids exhibit distinctive “chasing–escaping” or “schooling” behaviors, depending on glucose or hydrogen peroxide being used as the fuel. The transition in the collective behaviors is attributed to an alteration in the sign of ionic diffusiophoretic interactions, resulting from a change in the ionic clouds produced. This study offers a new strategy on tuning the communication between active and passive colloids, which holds substantial potentials for fundamental research in active matter and practical applications in cargo delivery, chemical sensing, and particle segregation.     

Two-Dimensional Interlayer Space Induced Horizontal Transformation of Metal–Organic Framework Nanosheets for Highly Permeable Nanofiltration Membranes

Laminar membranes comprising graphene oxide (GO) and metal–organic framework (MOF) nanosheets benefit from the regular in-plane pores of MOF nanosheets and thus can support rapid water transport. However, the restacking and agglomeration of MOF nanosheets during typical vacuum filtration disturb the stacking of GO sheets, thus deteriorating the membrane selectivity. Therefore, to fabricate highly permeable MOF nanosheets/reduced GO (rGO) membranes, a two-step method is applied. First, using a facile solvothermal method, ZnO nanoparticles are introduced into the rGO laminate to stabilize and enlarge the interlayer spacing. Subsequently, the ZnO/rGO membrane is immersed in a solution of tetrakis(4-carboxyphenyl)porphyrin (H₂TCPP) to realize in situ transformation of ZnO into Zn-TCPP in the confined interlayer space of rGO. By optimizing the transformation time and mass loading of ZnO, the obtained Zn-TCPP/rGO laminar membrane exhibits preferential orientation of Zn-TCPP, which reduces the pathway tortuosity for small molecules. As a result, the composite membrane achieves a high water permeance of 19.0 L m⁻² h⁻¹ bar⁻¹ and high anionic dye rejection (>99% for methyl blue).     

Armoring Black Phosphorus Anode with Stable Metal–Organic‑Framework Layer for Hybrid K‑Ion Capacitors

Potassium-ion capacitors(KICs)are promising for sustainable and eco-friendly energy storage technologies,yet their slow reaction kinetics and poor cyclability induced by large K-ion size are a major obstacle toward practical applications.Herein,by employing black phosphorus nanosheets(BPNSs)as a typical high-capacity anode material,we report that BPNS anodes armored with an ultrathin oriented-grown metal–organic-framework(MOF)interphase layer(BPNS@MOF)exhibit regulated potassium storage behavior for highperformance KICs.The MOF interphase layers as protective layer with ordered pores and high chemical/mechanical stability facilitate K ion diffusion and accommodate the volume change of electrode,beneficial for improved reaction kinetics and enhanced cyclability,as evidenced by substantial characterizations,kinetics analysis and DFT calculations.Consequently,the BPNS@MOF electrode as KIC anodes exhibits outstanding cycle performance outperforming most of the reported state-of-art KICs so far.