Ligand-Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells

Excess lead iodide (PbI₂), as a defect passivation material in perovskite films, contributes to the longer carrier lifetime and reduced halide vacancies for high-efficiency perovskite solar cells. However, the random distribution of excess PbI₂ also leads to accelerated degradation of the perovskite layer. Inspired by nanocrystal synthesis, here, a universal ligand-modulation technology is developed to modulate the shape and distribution of excess PbI₂ in perovskite films. By adding certain ligands, perovskite films with vertically distributed PbI₂ nanosheets between the grain boundaries are successfully achieved, which reduces the nonradiative recombination and trap density of the perovskite layer. Thus, the power conversion efficiency of the modulated device increases from 20% to 22% compared to the control device. In addition, benefiting from the vertical distribution of excess PbI₂ and the hydrophobic nature of the surface ligands, the modulated devices exhibit much longer stability, retaining 72% of their initial efficiency after 360 h constant illumination under maximum power point tracking measurement.     

Suppressed Voltage Deficit and Degradation of Perovskite Solar Cells by Regulating the Mineralization of Lead Iodide

Both the uncoordinated Pb²⁺ and excess PbI₂ in perovskite film will create defects and perturb carrier collection, thus leading to the open-circuit voltage (V_OC) loss and inducing rapid performance degradation of perovskite solar cells (PSCs). Herein, an additive of 3-aminothiophene-2-carboxamide (3-AzTca) that contains amide and amino and features a large molecular size is introduced to improve the quality of perovskite film. The interplay of size effect and adequate bonding strength between 3-AzTca and uncoordinated Pb²⁺ regulates the mineralization of PbI₂ and generates low-dimensional PbI₂ phase, thereby boosting the crystallization of perovskite. The decreased defect states result in suppressed nonradiative recombination and reduced V_OC loss. The power conversion efficiency (PCE) of modified PSC is improved to 22.79% with a high V_OC of 1.22 V. Moreover, the decomposition of PbI₂ and perovskite films is also retarded, yielding enhanced device stability. This study provides an effective method to minimize the concentration of uncoordinated Pb²⁺ and improve the PCE and stability of PSCs.     

Synergistic Effect of Elevated Device Temperature and Excess Charge Carriers on the Rapid Light‐Induced Degradation of Perovskite Solar Cells

With power conversion efficiencies now reaching 24.2%, the major factor limiting efficient electricity generation using perovskite solar cells (PSCs) is their long‐term stability. In particular, PSCs have demonstrated rapid degradation under illumination, the driving mechanism of which is yet to be understood. It is shown that elevated device temperature coupled with excess charge carriers due to constant illumination is the dominant force in the rapid degradation of encapsulated perovskite solar cells under illumination. Cooling the device to 20 °C and operating at the maximum power point improves the stability of CH₃NH₃PbI₃ solar cells over 100× compared to operation under open circuit conditions at 60 °C. Light‐induced strain originating from photothermal‐induced expansion is also observed in CH₃NH₃PbI₃, which excludes other light‐induced‐strain mechanisms. However, strain and electric field do not appear to play any role in the initial rapid degradation of CH₃NH₃PbI₃ solar cells under illumination. It is revealed that the formation of additional recombination centers in PSCs facilitated by elevated temperature and excess charge carriers ultimately results in rapid light‐induced degradation. Guidance on the best methods for measuring the stability of PSCs is also given.     

Suppressing Excess Lead Iodide Aggregation and Reducing N-Type Doping at Perovskite/HTL Interface for Efficient Perovskite Solar Cells

Excess lead iodide (PbI₂) aggregation at the charge carrier transport interface leads to energy loss and acts as unstable origins in perovskite solar cells (PSCs). Here, a strategy is reported to modulate the interfacial excess PbI₂ by introducing π-conjugated small-molecule semiconductors 4,4'-cyclohexylbis[N,N-bis(4-methylphenyl)aniline] (TAPC) into perovskite films through an antisolvent addition method. The coordination of TAPC to Pb I units through the electron-donating triphenylamine groups and π-Pb²⁺ interactions allows for a compact perovskite film with reduced excess PbI₂ aggregates. Besides, preferred energy level alignment is achieved due to the suppressed n-type doping effect at the hole transport layer (HTL) interfaces. As a result, the TAPC-modified PSC based on Cs_0.05(FA_0.85MA_0.15)_0.95Pb(I_0.85Br_0.15)₃ triple-cation perovskite achieved an improved PCE from 18.37% to 20.68% and retained ≈90% of the initial efficiency after 30 days of aging under ambient conditions. Moreover, the TAPC-modified device based on FA_0.95MA_0.05PbI_2.85Br_0.15 perovskite produced an improved efficiency of 23.15% compared to the control (21.19%). These results provide an effective strategy for improving the performance of PbI₂-rich PSCs.     

Highly Efficient and Stable Perovskite Solar Cells: Competitive Crystallization Strategy and Synergistic Passivation

Defects of perovskite (PVK) films are one of the main obstacles to achieving high-performance perovskite solar cells (PSCs). Here, the authors fabricated highly efficient and stable PSCs by introducing prolinamide (ProA) into the PbI₂ precursor solution, which improves the performance of PSCs by the competitive crystallization and efficient defect passivation of perovskite. The theoretical and experimental results indicate that ProA forms an adduct with PbI₂, competes with free I⁻ to coordinate with Pb²⁺, leads to the increase of the energy barrier of crystallization, and slows down the crystallization rate. Furthermore, the dual-site synergistic passivation of ProA is revealed by density functional theory (DFT) calculations and experimental results. ProA effectively reduces non-radiative recombination in the resultant films to improve the photovoltaic performance of PSCs. Notably, ProA-assisted PSCs achieve 24.61% power conversion efficiency (PCE) for the champion device and the stability of PSCs devices under ambient and thermal environments is improved.     

Combining Efficiency and Stability in Mixed Tin–Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer

The development of narrow-bandgap (E_g ≈ 1.2 eV) mixed tin–lead (Sn–Pb) halide perovskites enables all-perovskite tandem solar cells. Whereas pure-lead halide perovskite solar cells (PSCs) have advanced simultaneously in efficiency and stability, achieving this crucial combination remains a challenge in Sn–Pb PSCs. Here, Sn–Pb perovskite grains are anchored with ultrathin layered perovskites to overcome the efficiency-stability tradeoff. Defect passivation is achieved both on the perovskite film surface and at grain boundaries, an approach implemented by directly introducing phenethylammonium ligands in the antisolvent. This improves device operational stability and also avoids the excess formation of layered perovskites that would otherwise hinder charge transport. Sn–Pb PSCs with fill factors of 79% and a certified power conversion efficiency (PCE) of 18.95% are reported—among the highest for Sn–Pb PSCs. Using this approach, a 200-fold enhancement in device operating lifetime is achieved relative to the nonpassivated Sn–Pb PSCs under full AM1.5G illumination, and a 200 h diurnal operating time without efficiency drop is achieved under filtered AM1.5G illumination.     

Goethite Quantum Dots as Multifunctional Additives for Highly Efficient and Stable Perovskite Solar Cells

Minimization of defects and ion migration in organic–inorganic lead halide perovskite films is desirable for obtaining photovoltaic devices with high power conversion efficiency (PCE) and long‐term stability. However, achieving this target is still a challenge due to the lack of efficient multifunctional passivators. Herein, to address this issue, n‐type goethite (FeOOH) quantum dots (QDs) are introduced into the perovskite light‐absorption layer for achieving efficient and stable perovskite solar cells (PSCs). It is found that the iron, oxygen, and hydroxyl of FeOOH QDs can interact with iodine, lead, and methylamine, respectively. As a result, the crystallization kinetics process can be retarded, thereby resulting in high quality perovskite films with large grain size. Meanwhile, the trap states of perovskite can be effectively passivated via interaction with the under‐coordinated metal (Pb) cations, halide (I) anions on the perovskite crystal surface. Consequently, the PSCs with FeOOH QDs achieve a high efficiency close to 20% with negligible hysteresis. Most strikingly, the long‐term stability of PSCs is significantly enhanced. Furthermore, compared with the CH₃NH₃PbI₃‐based device, a higher PCE of 21.0% is achieved for the device assembled with a Cs_0.05FA_0.81MA_0.14PbBr_0.45I_2.55 perovskite layer.     

Suppressing Defects-Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

Organic–inorganic hybrid perovskites have attracted considerable attention due to their superior optoelectronic properties. Traditional one-step solution-processed perovskites often suffer from defects-induced nonradiative recombination, which significantly hinders the improvement of device performance. Herein, treatment with green antisolvents for achieving high-quality perovskite films is reported. Compared to defects-filled ones, perovskite films by antisolvent treatment using methylamine bromide (MABr) in ethanol (MABr-Eth) not only enhances the resultant perovskite crystallinity with large grain size, but also passivates the surface defects. In this case, the engineering of MABr-Eth-treated perovskites suppressing defects-induced nonradiative recombination in perovskite solar cells (PSCs) is demonstrated. As a result, the fabricated inverted planar heterojunction device of ITO/PTAA/Cs_0.15FA_0.85PbI₃/PC₆₁BM/Phen-NADPO/Ag exhibits the best power conversion efficiency of 21.53%. Furthermore, the corresponding PSCs possess a better storage and light-soaking stability.     

A Highly Emissive Surface Layer in Mixed‐Halide Multication Perovskites

Mixed‐halide lead perovskites have attracted significant attention in the field of photovoltaics and other optoelectronic applications due to their promising bandgap tunability and device performance. Here, the changes in photoluminescence and photoconductance of solution‐processed triple‐cation mixed‐halide (Cs_0.06MA_0.15FA_0.79)Pb(Br_0.4I_0.6)₃ perovskite films (MA: methylammonium, FA: formamidinium) are studied under solar‐equivalent illumination. It is found that the illumination leads to localized surface sites of iodide‐rich perovskite intermixed with passivating PbI₂ material. Time‐ and spectrally resolved photoluminescence measurements reveal that photoexcited charges efficiently transfer to the passivated iodide‐rich perovskite surface layer, leading to high local carrier densities on these sites. The carriers on this surface layer therefore recombine with a high radiative efficiency, with the photoluminescence quantum efficiency of the film under solar excitation densities increasing from 3% to over 45%. At higher excitation densities, nonradiative Auger recombination starts to dominate due to the extremely high concentration of charges on the surface layer. This work reveals new insight into phase segregation of mixed‐halide mixed‐cation perovskites, as well as routes to highly luminescent films by controlling charge density and transfer in novel device structures.     

Effective Carrier‐Concentration Tuning of SnO2 Quantum Dot Electron‐Selective Layers for High‐Performance Planar Perovskite Solar Cells

The carrier concentration of the electron‐selective layer (ESL) and hole‐selective layer can significantly affect the performance of organic–inorganic lead halide perovskite solar cells (PSCs). Herein, a facile yet effective two‐step method, i.e., room‐temperature colloidal synthesis and low‐temperature removal of additive (thiourea), to control the carrier concentration of SnO₂ quantum dot (QD) ESLs to achieve high‐performance PSCs is developed. By optimizing the electron density of SnO₂ QD ESLs, a champion stabilized power output of 20.32% for the planar PSCs using triple cation perovskite absorber and 19.73% for those using CH₃NH₃PbI₃ absorber is achieved. The superior uniformity of low‐temperature processed SnO₂ QD ESLs also enables the fabrication of ≈19% efficiency PSCs with an aperture area of 1.0 cm² and 16.97% efficiency flexible device. The results demonstrate the promise of carrier‐concentration‐controlled SnO₂ QD ESLs for fabricating stable, efficient, reproducible, large‐scale, and flexible planar PSCs.     

Efficient Perovskite Solar Cells Fabricated Through CsCl‐Enhanced PbI2 Precursor via Sequential Deposition

The fabrication of high‐quality perovskite film highly relies on chemical composition and the synthesis method of perovskite. So far, sequentially deposited MA_0.03FA_0.97Pb(I_0.97Br_0.03)₃ polycrystalline film is adopted to produce high‐performance perovskite solar cells with record power conversion efficiency (PCE). Fewer grain boundaries and incorporation of inorganic cation (e.g., cesium) would further increase device performance via sequential deposition. Here, cesium chloride (CsCl) is introduced into lead iodide (PbI₂) precursor solution that beneficially modulates the property of PbI₂ film, leading to larger grains with cesium incorporation in the resulting perovskite film. The enlarged crystal grains originate from a slower nucleation process for CsCl‐containing PbI₂ film when reacting with formamidine iodide, confirmed by in situ confocal photoluminescence imaging. Photovoltaic devices based on CsCl‐containing PbI₂ film demonstrate a higher averaging efficiency of 21.3% than 20.3% of the devices without CsCl additives for reverse scan. More importantly, the device stability is improved by CsCl additives that retain over 90% of their initial PCE value after 4000 min tracking at maximum power point under 1‐sun illumination. This work paves a way to further improve the photovoltaic performance of mixed‐cation‐halide perovskite solar cells via a sequential deposition method.     

Steric Impediment of Ion Migration Contributes to Improved Operational Stability of Perovskite Solar Cells

The operational instability of perovskite solar cells (PSCs) is known to mainly originate from the migration of ionic species (or charged defects) under a potential gradient. Compositional engineering of the “A” site cation of the ABX₃ perovskite structure has been shown to be an effective route to improve the stability of PSCs. Here, the effect of size-mismatch-induced lattice distortions on the ion migration energetics and operational stability of PSCs is investigated. It is observed that the size mismatch of the mixed “A” site composition films and devices leads to a steric effect to impede the migration pathways of ions to increase the activation energy of ion migration, which is demonstrated through multiple theoretical and experimental evidence. Consequently, the mixed composition devices exhibit significantly improved thermal stability under continuous heating at 85 °C and operational stability under continuous 1 sun illumination, with an extrapolated lifetime of 2011 h, compared to the 222 h of the reference device.     

In Situ Formation of Compact PbI2 Shell Boosts the Efficiency and Thermostability of Perovskite Solar Cells

Judicious tailoring of a robust interlayer is central to maintain the durable operation of optoelectronic devices. In this paper, an ultrathin, compact, and uniform PbI₂ shell on the surface of perovskite via the method of ZnI₂ aided in situ transformation is produced. The resultant PbI₂ interlayer can prolong the excited‐state lifetime of perovskite and attenuate the recombination kinetics of separated charges, leading to an improvement of power conversion efficiency up to 22.5% for perovskite solar cells (PSCs) at the AM 1.5G conditions. Moreover, the PSC with PbI₂ interlayer exhibits an enhanced thermostability, retaining 87% of initial efficiency after aging at 60 °C for 1000 h.     

Iodine Vacancy Redistribution in Organic–Inorganic Halide Perovskite Films and Resistive Switching Effects

Organic–inorganic halide perovskite (OHP) materials, for example, CH₃NH₃PbI₃ (MAPbI₃), have attracted significant interest for applications such as solar cells, photodectors, light‐emitting diodes, and lasers. Previous studies have shown that charged defects can migrate in perovskites under an electric field and/or light illumination, potentially preventing these devices from practical applications. Understanding and control of the defect generation and movement will not only lead to more stable devices but also new device concepts. Here, it is shown that the formation/annihilation of iodine vacancies (V_I's) in MAPbI₃ films, driven by electric fields and light illumination, can induce pronounced resistive switching effects. Due to a low diffusion energy barrier (≈0.17 eV), the V_I's can readily drift under an electric field, and spontaneously diffuse with a concentration gradient. It is shown that the V_I diffusion process can be suppressed by controlling the affinity of the contact electrode material to I^? ions, or by light illumination. An electrical‐write and optical‐erase memory element is further demonstrated by coupling ion migration with electric fields and light illumination. These results provide guidance toward improved stability and performance of perovskite‐based optoelectronic systems, and can lead to the development of solid‐state devices that couple ionics, electronics, and optics.     

Efficient and Stable Inverted Perovskite Solar Cells Incorporating Secondary Amines

Large‐bandgap perovskites offer a route to improve the efficiency of energy capture in photovoltaics when employed in the front cell of perovskite–silicon tandems. Implementing perovskites as the front cell requires an inverted (p–i–n) architecture; this architecture is particularly effective at harnessing high‐energy photons and is compatible with ionic‐dopant‐free transport layers. Here, a power conversion efficiency of 21.6% is reported, the highest among inverted perovskite solar cells (PSCs). Only by introducing a secondary amine into the perovskite structure to form MA_1?xDMA_xPbI₃ (MA is methylamine and DMA is dimethylamine) are defect density and carrier recombination suppressed to enable record performance. It is also found that the controlled inclusion of DMA increases the hydrophobicity and stability of films in ambient operating conditions: encapsulated devices maintain over 80% of their efficiency following 800 h of operation at the maximum power point, 30 times longer than reported in the best prior inverted PSCs. The unencapsulated devices show record operational stability in ambient air among PSCs.     

Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%

Low temperature solution processed planar‐structure perovskite solar cells gain great attention recently, while their power conversions are still lower than that of high temperature mesoporous counterpart. Previous reports are mainly focused on perovskite morphology control and interface engineering to improve performance. Here, this study systematically investigates the effect of precise stoichiometry, especially the PbI₂ contents on device performance including efficiency, hysteresis and stability. This study finds that a moderate residual of PbI₂ can deliver stable and high efficiency of solar cells without hysteresis, while too much residual PbI₂ will lead to serious hysteresis and poor transit stability. Solar cells with the efficiencies of 21.6% in small size (0.0737 cm²) and 20.1% in large size (1 cm²) with moderate residual PbI₂ in perovskite layer are obtained. The certificated efficiency for small size shows the efficiency of 20.9%, which is the highest efficiency ever recorded in planar‐structure perovskite solar cells, showing the planar‐structure perovskite solar cells are very promising.     

Constructing Additives Synergy Strategy to Doctor-Blade Efficient CH3NH3PbI3 Perovskite Solar Cells under a Wide Range of Humidity from 45% to 82%

Perovskite solar cells (PSCs) have emerged as one of the most promising and competitive photovoltaic technologies, and doctor-blading is a facile and robust deposition technique to efficiently fabricate PSCs in large scale, especially matching with roll-to-roll process. Herein, it demonstrates the encouraging results of one-step, antisolvent-free doctor-bladed methylammonium lead iodide (CH₃NH₃PbI_3, MAPbI₃) PSCs under a wide range of humidity from 45% to 82%. A synergy strategy of ionic-liquid methylammonium acetate (MAAc) and molecular phenylurea additives is developed to modulate the morphology and crystallization process of MAPbI₃ perovskite film, leading to high-quality MAPbI₃ perovskite film with large-size crystal, low defect density, and ultrasmooth surface. Impressive power conversion efficiency (PCE) of 20.34% is achieved for doctor-bladed PSCs under the humidity over 80% with a device structure of ITO/SnO₂/MAPbI₃/Spiro-OMeTAD/Ag. It is the highest PCEs for one-step solution-processed MAPbI₃ PSCs without antisolvent assistance. The research provides a facile and robust large-scale deposition technique to fabricate highly efficient and stable PSCs under a wide range of humidity, even with the humidity over 80%.     

High Phase Stability in CsPbI3 Enabled by Pb–I Octahedra Anchors for Efficient Inorganic Perovskite Photovoltaics

CsPbI₃ inorganic perovskite has exhibited some special properties particularly crystal structure distortion and quantum confinement effect, yet the poor phase stability of CsPbI₃ severely hinders its applications. Herein, the nature of the photoactive CsPbI₃ phase transition from the perspective of PbI₆ octahedra is revealed. A facile method is also developed to stabilize the photoactive phase and to reduce the defect density of CsPbI₃. CsPbI₃ is decorated with multifunctional 4-aminobenzoic acid (ABA), and steric neostigmine bromide (NGBr) is subsequently used to further mediate the thin films' surface (NGBr-CsPbI₃(ABA)). The ABA or NG cation adsorbed onto the grain boundaries/surface of CsPbI₃ anchors the PbI₆ octahedra via increasing the energy barriers of octahedral rotation, which maintains the continuous array of corner-sharing PbI₆ octahedra and kinetically stabilizes the photoactive phase CsPbI₃. Moreover, the added ABA and NGBr not only interact with shallow- or deep-level defects in CsPbI₃ to significantly reduce defect density, but also lead to improved energy-level alignment at the interfaces between the CsPbI₃ and the charge transport layers. Finally, the champion NGBr-CsPbI₃(ABA)-based inorganic perovskite solar cell delivers 18.27% efficiency with excellent stability. Overall, this work demonstrates a promising concept to achieve highly phase-stabilized inorganic perovskite with suppressed defect density for promoting its optoelectronic applications.     

Efficient and Stable CsPbI3 Solar Cells via Regulating Lattice Distortion with Surface Organic Terminal Groups

All‐inorganic cesium lead iodide perovskites (CsPbI₃) are promising wide‐bandgap materials for use in the perovskite/silicon tandem solar cells, but they easily undergo a phase transition from a cubic black phase to an orthorhombic yellow phase under ambient conditions. It is shown that this phase transition is triggered by moisture that causes distortion of the corner‐sharing octahedral framework ([PbI₆]^4?). Here, a novel strategy to suppress the octahedral tilting of [PbI₆]^4? units in cubic CsPbI₃ by systematically controlling the steric hindrance of surface organic terminal groups is provided. This steric hindrance effectively prevents the lattice distortion and thus increases the energy barrier for phase transition. This mechanism is verified by X‐ray diffraction measurements and density functional theory calculations. Meanwhile, the formation of an organic capping layer can also passivate the surface electronic trap states of perovskite absorber. These modifications contribute to a stable power conversion efficiency (PCE) of 13.2% for the inverted planar perovskite solar cells (PSCs), which is the highest efficiency achieved by the inverted‐structure inorganic PSCs. More importantly, the optimized devices retained 85% of their initial PCE after aging under ambient conditions for 30 days.     

Controlling Nucleation and Growth of Metal Halide Perovskite Thin Films for High‐Efficiency Perovskite Solar Cells

Metal halide perovskite thin films can be crystallized via a broad range of solution‐based routes. However, the quality of the final films is strongly dependent upon small changes in solution composition and processing parameters. Here, this study demonstrates that a fractional substitution of PbCl₂ with PbI₂ in the 3CH₃NH₃I:PbCl₂ mixed‐halide starting solution has a profound influence upon the ensuing thin‐film crystallization. The presence of PbI₂ in the precursor induces a uniform distribution of regular quadrilateral‐shaped CH₃NH₃PbI₃ perovskite crystals in as‐cast films, which subsequently grow to form pinhole‐free perovskite films with highly crystalline domains. With this new formulation of 3CH₃NH₃I:0.98PbCl₂:0.02PbI₂, this study achieves a 19.1% current–voltage measured power conversion efficiency and a 17.2% stabilized power output in regular planar heterojunction solar cells.