共查询到20条相似文献,搜索用时 578 毫秒
1.
以工业废弃物粉煤灰为主要原料,通过改变配料中的硅铝比来制备不同硅铝比的粉煤灰基多孔陶瓷基体.在基体表面负载稀土La,制得La负载粉煤灰基多孔陶瓷.研究了不同硅铝比对多孔陶瓷的物相、形貌、气孔率、酸溶率、体积密度、碎裂应力和La负载的影响.结果表明:钠钙斜长石含量越高,稀土La负载量越高;当硅铝比为1.55时,多孔陶瓷中钠钙斜长石含量为82%,负载La后Cr(Ⅵ)吸附量为0.7845 mg/g. 相似文献
2.
3.
聚硼硅氮烷先驱体的合成及其目标陶瓷SiBNC的性能 总被引:1,自引:0,他引:1
以三氯化硼、甲基氢二氯硅烷、六甲基二硅氮烷为起始原料,通过共缩合路径合成了SiBNC陶瓷先驱体-聚硼硅氮烷(PBSZ),将PBSZ在氨气气氛中高温热解可得SiBNC陶瓷.对先驱体及其陶瓷产物的组成、结构和高温结晶性能进行了研究.结果表明,先驱体的骨架结构为-Si-N-B-,其中,B、N以硼氮六环形式存在.1000℃的陶瓷产率为61%,陶瓷中碳含量低于0.5%,具有较好的热稳定性能,能够在1700℃以上保持非晶,在1850℃部分结晶,主要由Si3N4、BN和少量SiC组成,1500℃-1850℃间质量损失约为10%. 相似文献
4.
5.
6.
7.
8.
原位反应烧结法制备SiC多孔木材陶瓷 总被引:1,自引:0,他引:1
以香杉木粉、硅粉和环氧树脂为原料,先低温制成木材陶瓷,然后利用高温原位反应烧结工艺制成了具有原木微观结构的SiC多孔木材陶瓷。TGA研究了木粉和环氧树脂的热分解行为,用XRD和SEM研究SiC多孔木材陶瓷的物相组成和微观结构,用阿基米德法测定SiC多孔木材陶瓷的显气孔率,系统研究了烧结温度和成分配比对SiC多孔木材陶瓷的摩擦学性能的影响。结果显示:SiC多孔木材陶瓷具有类似于原始木材的微观管胞结构;显气孔率随着烧结温度的升高而降低,但随着Si含量的升高而升高;在1600℃下制备的SiC多孔木材陶瓷具有良好的摩擦学性能,后期析出的碳颗粒可以有效降低磨损量。 相似文献
9.
10.
以节约粘土资源及开发新型节能建筑材料为目的,利用长江沿岸低品位石英砂开发研制多孔陶瓷.研究了烧成工艺对石英砂基多孔陶瓷孔结构及性能的影响,为新型隔热保温材料的开发提供了工艺参考依据.研究结果表明,利用长江沿岸低品位石英砂成功地研制出多孔陶瓷,其密度随烧结温度的升高或保温时间的延长而增大,气孔率则随烧结温度的升高或保温时间的延长而降低.从能耗、成本与性能3方面考虑,石英砂基多孔陶瓷较合理的制备工艺参数为烧结温度1100℃、保温时间60min. 相似文献
11.
网络陶瓷/金属复合材料的研究进展 总被引:1,自引:0,他引:1
介绍了网络陶瓷/金属复合材料近年来的发展.从网络陶瓷/金属复合材料体系出发,介绍了当前主要制备网络陶瓷的多种制备工艺和方法以及各种方法的优缺点;在制备复合材料的工艺中,介绍了无压浸渗和压力浸渗制备网络陶瓷/金属复合材料两种主要的材料复合方法,比较了无压和压力浸渗制备网络陶瓷/金属复合材料各自的优点和弊端;介绍了陶瓷/金属相的润湿类型以及通过添加元素、包覆及热处理等方法来改善金属对陶瓷的润湿;同时也介绍了复合材料中陶瓷与金属结合处的界面结构类型.总结了目前制备的网络陶瓷的不足之处,提出为了满足抗冲击材料的使用,制备网络陶瓷必须要解决的几个关键问题. 相似文献
12.
Transparent ceramics for high-energy laser systems 总被引:1,自引:0,他引:1
Jas Sanghera Shyam BayyaGuillermo Villalobos Woohong KimJesse Frantz Brandon ShawBryan Sadowski R. MiklosColin Baker Michael HuntIshwar Aggarwal Fred KungDavid Reicher Stan PeplinskiAl Ogloza Peter LangstonChuck Lamar Peter VarmetteMark Dubinskiy Lewis DeSandre 《Optical Materials》2011,33(3):511-518
We demonstrate that transparent magnesium aluminate spinel ceramic possesses excellent thermo-optical properties, a record low absorption loss of 6 ppm/cm, and superior ruggedness which position it as a prime candidate for an exit window aperture for high energy laser systems, especially in hostile environments. We also demonstrate lasing with an efficiency of about 45% in transparent Yb3+:Y2O3 ceramic made by hot pressing high purity submicron co-precipitated powder. This paves the way forward for high power solid state lasers exploiting hosts with higher thermal conductivity than YAG. 相似文献
13.
14.
以(Mg0.8Zn0.2)TiO,(MZT)为原料,采用加入高电介质材料Ba4Nd28/3T18O54zBi2O3(BNT)制备微波电介质陶瓷0.7(Mg08Zn02)T103·0.3{Ba4Nd2Ⅳ3Ti18054·zBi203I(z=0.15,0.18,0.2),以提高MZT的介电性能。掺入Bi3+可以降低烧结温度,从而可以在低烧结温度((1200-1230%)下制取MZT和BNT的合成材料。通过对介电性能、密度、XRD和SEM测试所获得的陶瓷可以发现,掺入Bi3+数量的多少和结烧温度的高低会影响到陶瓷的结构和性能,结果说明,当z=0.18,0.7(Mgn8znn2)Ti03·0.3{Ba4NdzsnTil8054·zBi203}的结烧温度为1230℃时,可以获得很好的介电性能:εr=35.56,Qf=5811GHz,TF=-3.225ppm/℃。 相似文献
15.
Victor A. Greenhut 《Advanced Performance Materials》1994,1(1):9-34
Conclusion Advanced performance ceramics have shown dramatic accomplishments during the past ten to fifteen years. Many new exciting properties and applications have developed. Fundamentally new material properties and behaviors have resulted with a number of exciting new applications. Expectations exceeded realistic evaluations of progress during the past decade although many of the target properties of elevated temperature performance, strength, toughness and non-catastrophic failure have been realized. The commercialization of advanced structural ceramics leads the general rate of economic growth, and appears to have a bright future as current stress on commercialization drives not just further materials development, but also standards of design and material selection. 相似文献
16.
中国先进陶瓷研究及其展望 总被引:26,自引:0,他引:26
本文综述了中国在先进陶瓷,包括结构陶闪必功能陶瓷的研究概况及其展望。从本世纪五十年代以来,我国即开展先进陶瓷的基础研究和应用研究。在此基础上,逐步形成了在这一领域听研究趋向,即多相复合陶瓷,纳米陶瓷和陶瓷材料的剪裁与设计。 相似文献
17.
对 BN—AlN—TiB_2导电复相陶瓷(BAT 瓷)在真空镀铝过程中的熔铝腐蚀机理进行了初步探讨。认为熔铝对 BAT 瓷的腐蚀主要通过 BN 相按抟如下反应进行:Al+BN→AlN+B。TiB_2的作用是提供材料合适的电阻率;AlN 的作用是提高材料的耐熔铝腐蚀性,其含量的提高对蒸发舟的耐熔铝腐蚀性有益;BN 的作用是保证材料具有足够高的耐热震性和可机械加工性,但其耐熔铝腐蚀性最差,其含量应尽量降低。BAT 瓷的显微结构完整、各相晶体发育充整、结晶较为粗大对提高其耐熔铝腐蚀性可能有重大的作用。 相似文献
18.
19.
Bin Liu Dai-Ning Fang Ai Kah Soh Keh-Chih Hwang 《International Journal of Fracture》2001,111(4):395-407
In this paper, the influence of dielectric medium inside a crack on crack growth, in an infinite poled or depolarized ceramic, has been studied by employing an electric boundary condition derived from the exact boundary conditions proposed by Sosa (1996). The effect of remanent polarization has also been examined. The results obtained show that electric displacement on crack surfaces is not always zero. Hence, for studying fracture problems of piezoelectric ceramics with cracks accurately, the exact boundary conditions should be implemented. In addition, the results indicate that the effect of remanent polarization is equivalent to that of a positive electric field and it cannot be neglected. It is also found that a positive electric field always has a tendency to open a crack, and a negative electric field tends to close a crack. 相似文献