A novel ligand for atom transfer radical polymerization

A ligand is a crucial element for atom transfer radical polymerization (ATRP). A new nitrogen-containing compound, 1,1’-(2,2’-(ethane-1,2-diylbis(butyl azanediyl)) -bis(ethane-2,1-diyl)) dipyrrolidin-2-one (DBBD), was synthesized and utilized as the ligand of copper halide for ATRP of methyl methacrylate (MMA) and methyl acrylate (MA). It was found that the CuBr/DBBD and Ethyl 2-bromoisobutyrate (EBIB) system could mediate the polymerization of MMA and the reaction was first-order kinetics, although the control of molecular weights was not perfect. When CuCl was used to replace CuBr, the molecular weights of obtained polymers were well controlled, which indicated the halide exchange could improve the controllability. In the polymerization of MA using Methyl 2-bromopropronate (MBP) or EBIB as initiator and CuCl/DBBD as catalyst, good control of the polymerization could be achieved and the molecular weights were very close to the predicted value.     

Alkylation of polyethyleneimine for homogeneous ligands in ATRP

Ethylated and butylated polyethyleneimine ligands were synthesized and employed in copper catalyzed atom transfer radical polymerization of styrene and methyl methacrylate with suitable initiators in order to obtain homogeneous polymerizations, resulting in well defined polymers with low polydispersities. Linear curves drawn from kinetics and conversion-molecular weight plots indicate that all the polymerizations were successfully controlled. In ATRP reactions of S and MMA, the apparent rate of polymerization, k_p^app, exhibits a plateau at [Ligand]/[CuBr] ≥ 0.5 ratio for both ligands. The apparent rate constant also decreases by increasing the alkyl chain length of the alkylated polyethyleneimine ligand. Ethylated and butylated polyethyleneimine ligands in ATRP of S and MMA were found to be faster than the existing ATRP ligands.     

Urotropine as a highly effective and versatile promoter for atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a transition metal complex‐catalyzed controlled/‘living’ radical process. Recently, there has been a lot of interest focused on decreasing the catalyst loading and reducing the cost of post‐polymerization purification for ATRP. In this work, urotropine was found to significantly enhance the ATRP of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St) catalyzed by CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) and CuBr/tris(2‐(dimethylamino)ethylamine) (Me₆TREN). With the addition of 25 times the amount of urotropine relative to CuBr, well‐controlled polymerizations of MA, MMA and St were obtained at catalyst‐to‐initiator ratios of 0.01, 0.05 and 0.05, respectively, producing the corresponding polymers with molecular weights close to theoretical values and low polydispersities. The catalyst concentration could even be reduced to ppm level at a catalyst‐to‐initiator ratio as low as 0.001 in the polymerization of MA. These results indicate that urotropine is a very effective and versatile promoter for both CuBr/PMDETA and CuBr/Me₆TREN. In the presence of urotropine, the catalyst loading could be reduced by as much as 1000 times. As PMDETA is one of the cheapest ATRP ligands, the combination of urotropine with CuBr/PMDETA could substantially reduce the catalyst loading and the cost of post‐polymerization purification at the industrial scale and thus is promising for potential industrial applications. © 2014 Society of Chemical Industry     

Reverse atom transfer radical polymerization of styrene in the presence of tetraethylthiuram disulfide

Reverse atom transfer radical polymerization (ATRP) of styrene initiated with tetraethylthiuram disulfide (TD)/cuprous bromide (CuBr)/2,2′-bipyridine (bpy) has been successfully carried out at 120 °C. The kinetic plot was first order in monomer. The measured number-average molecular weight was in good accordance with the theoretical one. Radical scavenger 1,1-diphenyl-2-picrylhydrazyl (DPPH) immediately terminated the reaction, which supported the radical essence of this polymerization. ¹H NMR and UV spectra analyses revealed α-S₂CNEt₂ and ω-Br end groups on the polystyrene chain. Conventional ATRP of methyl methacrylate could progress with the obtained polymer acting as the macroinitiator and CuBr/bpy or CuCl/bpy as the catalyst.     

甲基丙烯酸甲酯的原子转移自由基沉淀聚合

以乙醇为溶剂,溴化亚铜(CuBr)为催化剂,溴乙酸乙酯为引发剂,1,10菲罗啉和N,N,N',N',N'-五甲基二乙烯基三胺(PMDETA)分别为配体的催化体系,进行了甲基丙烯酸甲酯的原子转移自由基沉淀聚合,通过GPC和称重量法对聚合物进行表征。结果表明,两种催化体系下MMA的转化速率较快,甲基丙烯酸甲酯的原子转移自由基沉淀聚合得到了较好的实现,得到了分子量分布较窄的聚合物。     

The beneficial effect of small amount of water in the ambient temperature atom transfer radical homo and block co-polymerization of methacrylates

ATRP of several methacrylates viz. methyl methacrylate (MMA), ethyl methacrylate (EMA), n-butyl methacrylate (nBMA), t-butyl methacrylate (tBMA), benzyl methacrylate (BzMA) and (N,N-dimethylamino)ethyl methacrylate (DMAEMA) has been studied in neat as well as aqueous (up to 12 vol% water) acetone at 35 °C using CuCl/bipyridine (bpy) catalyst and ethyl 2-bromoisobutyrate as the initiator. Addition of water significantly enhances the rate of polymerization without losing control. Unlike CuCl/bpy the CuBr/bpy catalyst gives poor control which is attributed to the lower solubility and consequent heterogeneity in the latter case. Of the other ligands used with the CuCl catalyst viz. o-phenanthroline (o-phen), 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA), 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA), Me₆TREN only o-phen offers reasonably good control. The CuCl/bpy catalyst system has been used also in preparing some di- and tri-block copolymers with reasonably low polydispersity index (PDI) at ambient temperature (35 °C) using aqueous acetone as the solvent. The following block copolymers have been prepared PMMA-tBMA, PMMA-b-tBMA-b-MMA, PMMA-DMAEMA, by this method.     

Atom transfer radical polymerizations of methyl methacrylate and styrene with an iniferter reagent as the initiator

Three novel iniferter reagents were synthesized and used as initiators for the polymerizations of methyl methacrylate (MMA) and styrene (St) in the presence of copper(I) bromide and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 90 and 115°C, respectively. All the polymerizations were well controlled, with a linear increase in the number‐average molecular weights during increased monomer conversions and relatively narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.36) throughout the polymerization processes. The polymerization rate of MMA was faster in bulk than that in solution and was influenced by the different polarities of the solvents. A slight change in the chemical structures of the initiators had no obvious effect on the polymerization rates of MMA and St. The initiator efficiency toward MMA was lower than that toward St. The results of ¹H‐NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum analysis, and chain‐extension experiments demonstrated that well‐defined poly(methyl methacrylate) and polystyrene bearing photolabile groups could be obtained via atom transfer radical polymerization (ATRP) with three iniferter reagents as initiators. The polymerization mechanism for this novel initiation system was a common ATRP process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of binary mixed homopolymer brushes by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization

This communication describes a novel strategy to synthesize binary mixed homopolymer brushes from mixed self-assembled monolayers (SAMs) on silica substrates by combining atom transfer radical polymerization (ATRP) and nitroxide-mediated radical polymerization (NMRP). Mixed SAMs terminated by ATRP and NMRP initiators were prepared by coadsorption of two corresponding organotrichlorosilanes from toluene solutions. Mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes were synthesized by ATRP of MMA at 80 °C followed by NMRP of styrene at 115 °C. Corresponding ‘free’ initiators were added into the solutions to control the polymerizations. We have found that the brush thickness increases with molecular weight in a nearly linear fashion. For a series of binary brushes consisting of PMMA of molecular weight of 26,200 and PS of various molecular weights, we have observed a transition in water contact angles with increasing PS molecular weight after CH₂Cl₂ treatment. Moreover, binary mixed polymer brushes with comparable molecular weights for two grafted polymers undergo reorganization in response to environmental changes, exhibiting different wettabilities.     

Atom transfer radical polymerization of methyl methacrylate initiated with a macroinitiator of poly(vinyl acetate)

Well‐defined poly(vinyl acetate‐b‐methyl methacrylate) block copolymers were successfully synthesized by the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in p‐xylene with CuBr as a catalyst, 2,2′‐bipyridine as a ligand, and trichloromethyl‐end‐grouped poly(vinyl acetate) (PVAc–CCl₃) as a macroinitiator that was prepared via the telomerization of vinyl acetate with chloroform as a telogen. The block copolymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H‐NMR. The effects of the solvent and temperature on ATRP of MMA were studied. The control over a large range of molecular weights was investigated with a high [MMA]/[PVAc–CCl₃] ratio for potential industry applications. In addition, the mechanism of the polymerization was discussed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1089–1094, 2006     

Atom transfer radical suspension polymerization of methyl methacrylate catalyzed by CuCl/bpy

Atom transfer radical suspension polymerization (suspension ATRP) of methyl methacrylate (MMA) was carried out using 1-chloro-1-phenylethane (1-PECl) as initiator, copper chloride/bipyridine (CuCl/bpy) as catalyst. The polymerization was accomplished with a mechanical agitator under the protection of nitrogen atmosphere. Apart from the dispersing agent (1% PVA), NaCl was also used in the water phase to decrease the diffusion of CuCl/bpy to water and the influence of the concentration of NaCl was investigated. Subsequently, the kinetic behavior of the suspension ATRP of MMA at different temperatures was studied. At 90 and 95 °C, the polymerization showed first order with respect to monomer concentration until high conversion. The molecular weight (M_n) of the polymer increased with monomer conversion. However, at lower temperatures, different levels of autoacceleration was observed. The polymerization deviated from first order with respect to monomer concentration when the conversion was up to some degree. The lower the temperature was, the more the deviation displayed. On comparison with bulk ATRP of MMA, the rate of suspension ATRP was much faster.     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

Synthesis of diblock and triblock copolymers containing dendrons via ‘living’ controlled radical polymerization

The dendritic Fréchet‐type polyarylether 2‐bromoisobutyrates (Gn‐Br, n = 1–3) as macroinitiators for the ‘living’/controlled radical polymerization of styrene (St) and methyl methacrylate (MMA) were investigated. The atom transfer radical polymerization of St and MMA carried out with CuBr/bpy (2,2′‐bipyridine) catalyst in bulk yielded well‐defined dendritic–linear diblock copolymers (Gn–PSt and Gn–PMMA). The use of G3–PSt for the block copolymerization of MMA and G3–PMMA for the chain extension polymerization of MMA in the presence of CuBr/bpy catalyst is also described. The triblock copolymers obtained were of predetermined molecular weights and relatively low polydispersities, which indicates the living nature of the reaction system. © 2002 Society of Chemical Industry     

Synthesis of polyacrylonitrile via reverse ATRP initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/CuCl2/2,2′‐bipyridine

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living‐radical polymerization of acrylonitrile (AN). 1,1,2,2‐Tetraphenyl‐1,2‐ethanediol (TPED) was first used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 53.2 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3529–3533, 2007     

The synthesis of (N1E,N4E)-N1,N4-bis(pyridine-2-YL) ethylene benzene-1,4-diamine and investigation of its efficiency as new binuclear catalyst complex in copper-based ATRP

(N¹E,N⁴E)-N¹,N⁴-bis(pyridin-2-yl) ethylene benzene-1,4-diamine (BPEBD) was synthesized by condensation of 2-acetyl pyridine and 1,4-diaminobenzene and its efficiency as a catalyst in Cu-based atom transfer radical polymerizations (ATRP) of methyl methacrylate (MMA) and styrene (S) was investigated. Linear first-order kinetic plots were obtained. However, there were induction periods. The apparent rate constant values of ATRP of MMA with CuCl/BPEBD catalyst system in toluene were found to be between 2.10 × 10^?5 and 9.83 × 10^?5 s^?1, while they were between 6.67 × 10^?6 and 3.30 × 10^?5 s^?1 in the case of acetonitrile, indicating the presence of a low radical concentration throughout the polymerizations. Low apparent rate constant values denote a good control over ATRP in general. Apparent rate constant vs [ligand]/[catalyst] ratio plots showed a maximum at the [ligand]/[catalyst] ratio of 1. In the ATRP of MMA in toluene, M _n,GPC values increased linearly with conversion and these molecular weight values were close to M _n,th in comparison to that of in acetonitrile. In the polymerization of S, the control of molecular weights was not good, although the reactions were first-order kinetics. Cyclic voltammetry measurements confirmed that CuCl/BPEBD complex in acetonitrile gives quasi-reversible redox couples, and copper (I) centers in CuCl/BPEBD binuclear catalyst complexes are readily oxidized and it potentially suits to facile ATRP.     

Pyridylphosphine ligands for iron-based atom transfer radical polymerization of methyl methacrylate and styrene

Two pyridylphosphine ligands, 2-(diphenylphosphino)pyridine (DPPP) and 2-[(diphenylphosphino)methyl]pyridine (DPPMP), were investigated as complexing ligands in the iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and styrene with various initiators and solvents. In studies of their ATRP behavior, the FeBr₂/DPPP catalytic system was a more efficient ATRP catalyst for the MMA polymerization than the other complexes studied in this paper. Most of these systems were well controlled with a linear increase in the number-average molecular weights (M_n) vs. conversion and relatively low molecular weight distributions (M_w/M_n = 1.15-1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values with the DPPP ligand. The polymerization rate of MMA attained a maximum at a ratio of ligand to metal of 2:1 in p-xylene at 80 °C. The polymerization was faster in polar solvents than in p-xylene. The 2-bromopropionitrile (BPN) initiated ATRP of MMA with the FeX₂/DPPP catalytic system (X = Cl, Br) was able to be controlled in p-xylene at 80 °C. The polymerization of styrene was able to be controlled using the PECl/FeCl₂/DPPP system in DMF at 110 °C.     

Synthesis of telechelic C60 end‐capped polymers under microwave irradiation

Bromo‐Double‐Terminated polystyrene (Br‐PSt‐Br) and poly(methyl methacrylate) (Br‐PMMA‐Br) with predesigned molecular weight and narrow polydispersity were prepared by atom transfer radical polymerization (ATRP) using the initiating system aa′‐dibromo‐p‐xylene(DBX) / CuBr/2,2′‐bipyridine(bipy). The precursor bromo‐terminated polymers were subsequently functionalized with fullerene C₆₀ using CuBr/bipy as the catalyst system under microwave irradiation (MI). The telechelic C₆₀ end‐capped products were characterized by gel permeation chromatography (GPC), UV‐vis, FT‐IR, TGA, DSC, ¹H NMR, and ¹³C NMR. The results showed that microwave irradiation could significantly increase the rate of fullerenation reaction, and the physical properties and structure of the C₆₀ end‐capped polymers are not modified by the use of the microwave. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 828–834, 2006     

Atom transfer radical polymerization and copolymerization of vinyl acetate catalyzed by copper halide/terpyridine

Copper‐mediated atom transfer radical polymerization (ATRP) is versatile for living polymerizations of a wide range of monomers, but ATRP of vinyl acetate (VAc) remains challenging due to the low homolytic cleavage activity of the carbon‐halide bond of the dormant poly(vinyl acetate) (PVAc) chains and the high reactivity of growing PVAc radicals. Therefore, all the reported highly active copper‐based catalysts are inactive in ATRP of VAc. Herein, we report the first copper‐catalyst mediated ATRP of VAc using CuBr/2,2′:6′,2″‐terpyridine (tPy) or CuCl/tPy as catalysts. The polymerization was a first order reaction with respect to the monomer concentration. The molecular weights of the resulting PVAc linearly increased with the VAc conversion. The living character was further proven by self‐chain extension of PVAc. Using polystyrene (PS) as a macroinitiator, a well‐defined diblock copolymer PS‐b‐PVAc was prepared. Hydrolysis of the PS‐b‐PVAc produced a PS‐b‐poly(vinyl alcohol) amphiphilic diblock copolymer. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Photo‐Induced atom transfer radical polymerization with nanosized α‐Fe2O3 as photoinitiator

Photo‐induced atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was achieved in poly(ethylene glycol)‐400 with nanosized α‐Fe₂O₃ as photoinitiator. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in conjunction with ethyl 2‐bromoisobutyrate (EBiB) as ATRP initiator and FeCl₃·6H₂O/Triphenylphosphine (PPh₃) as complex catalyst. The photo‐induced polymerization of MMA proceeded in a controlled/living fashion. The polymerization followed first‐order kinetics. The obtained PMMA had moderately controlled number‐average molecular weights in accordance with the theoretical number‐average molecular weights, as well as narrow molecular weight distributions (M_w/M_n). In addition, the polymerization could be well controlled by periodic light‐on–off processes. The resulting PMMA was characterized by ¹H nuclear magnetic resonance and gel permeation chromatography. The brominated PMMA was used further as macroinitiator in the chain‐extension with MMA to verify the living nature of photo‐induced ATRP of MMA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42389.     

Effect of ferrocene moieties on the copper‐based atom transfer radical polymerization of methyl methacrylate

The atom transfer radical polymerization (ATRP) of methyl methacrylate catalyzed by copper–tripodal complexes with ferrocene moieties (CuX/TRENFcImine, where X is Br or Cl, and TRENFcImine is tris‐[2‐(ferrocenylmethyleneimino)ethyl]amine) was investigated to understand the effect of redox active moieties on the performance of ATRP catalysts. The CuBr/TRENFcImine system was highly active, with 82% conversion in 2 h. However, the polymerization became slower at higher molar ratios of monomer to catalyst. The polydispersity index was broad, and the initiation efficiency was relatively low. On the basis of the conformational analysis, the highly active and less controlled polymerization was probably caused by the electronic effect rather than the steric effect on the ferrocene moieties, which led to the higher and lower values in the activation and deactivation steps, respectively. The polydispersity index was improved by the addition of CuBr₂, but this led to slower rates of polymerization. The effect of halide groups on ATRP caused a faster rate in the CuBr/TRENFcImine polymerization system than in the CuCl/TRENFcImine system. The higher molar ratio of monomer to catalyst had no significant effect on the CuCl/TRENFcImine system. Nonetheless, the trace of water in the CuCl₂·2H₂O system accelerated the rate of propagation, which led to a higher molecular weight. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Rapid ambient temperature living radical polymerization of methyl methacrylate and styrene utilizing sodium hypophosphite as reducing agent

A facile, safe, and inexpensive reducing agent, sodium hypophosphite (NaH₂PO₂·H₂O), has been successfully used to perform ambient temperature living radical polymerizations of methyl methacrylate (MMA) and styrene (St). The rapid radical polymerizations were readily obtained at 25°C, i.e., MMA reached a conversion of ca 90% after 2.5 h, and St reached a conversion of ca 80% after 40 h. The polymerizations of MMA and St exhibited excellent living/controlled nature, as evidenced by pseudo first‐order kinetics of polymerization, linear evolution of molecular weights with increasing monomer conversions, and narrow molecular weight distributions. The various experimental parameters—ligand, solvent, and molar ratio of NaH₂PO₂·H₂O to CuSO₄·5H₂O—were varied to improve the control of polymerization, molecular weight, and molecular weight distribution. ¹H NMR analyses and chain‐extension reactions confirm the high chain‐end functionality of the resultant poly(methyl methacrylate) and polystyrene. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42123.