聚乳酸/聚(已二酸-对苯二甲酸丁二酯)共混物的非等温结晶动力学

采用熔融挤出法制备了聚乳酸/聚(已二酸-对苯二甲酸丁二酯)共混物。利用差示扫描量热仪研究了聚乳酸及其共混体系的非等温结晶过程。用经Jeziorny修正的Avrami方程和Mo法对其非等温结晶动力学进行了分析。结果表明:Avrami方程和Mo法都适用于处理聚乳酸及其共混体系的非等温结晶过程,共混物的结晶速率大于聚乳酸的结晶速率。此外,用Huffman-Lauritzen理论计算了非等温结晶的结晶活化能,发现共混体系的结晶活化能绝对值小于聚乳酸。     

Isothermal crystallization of PLA: Nucleation density and growth rates of α and α' phases

From a technological point of view, poly(lactic acid) (PLA) is one of the most important polymers produced from renewable sources, due to its versatility, relatively acceptable processability, and low cost. However, a significant limitation exists in its slow crystallization kinetics, which results in amorphous products having low mechanical properties and thermal resistance. For this reason, quantitative knowledge of the phenomenon of crystallization kinetics is fundamental. In this work, the crystallization kinetics in quiescent conditions of a commercial grade of PLA was analyzed in terms of nucleation and growth rates by direct morphological observations at different crystallization temperatures (T_c) and by calorimetric analysis in isothermal and non-isothermal conditions. The optical analysis showed a spherulitic morphology with radial growth of the lamellae. The analysis of the growth rate evidenced the α/α'-crystals polymorphism with a transition temperature of ~120°C. Based on experimental observation, the crystallization kinetics of the two crystalline phases were assessed.     

Structure,Performance and Crystallization Behavior of Poly (Lactic Acid)/Humic Acid Amide Composites

Humic acid amide (HA-amide) was prepared by amidation of HA and dodecylamine (DDA) with carbonyl diimidazole (CDI) as coupling reagent. Furthermore, HA-amide was added to poly (lactic acid) (PLA) as a nucleating agent to prepare poly (lactic acid)/humic acid amide composites (PLA/HA-amide) by melt blending. The structure and performance of PLA/HA-amide composites were investigated by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), polarized optical microscopy (POM), and rheological analysis. Non-isothermal crystallization kinetics showed the HA-amide enhanced the crystallization rate of PLA. The results of crystallization behavior of PLA/HA-amide composites showed that HA-amide was an efficient nucleating agent of PLA.     

New insight into the mechanism of enhanced crystallization of PLA in PLLA/PDLA mixture

Poly(lactic acid) (PLA) is a bio‐based and compostable polymer that has quickly developed into a competitive material, but the control of crystallinity is a bottleneck in extended utilization. The crystallization of PLA has been a rich topic because of the existence of two enantiomeric forms of poly(L‐lactic acid) (PLLA) and poly(d ‐lactic acid) (PDLA) can form stereocomplex (SC) crystal with high melting point that can be used to control the crystallization behaviors. The SC crystal was regarded as an effective nucleating agent for promoting the crystallization rate and crystallinity of PLA. We investigated cold crystallization of PLLA/PDLA (1:1) mixture with in situ WAXS measurements and found that the homo‐crystal of PLA formed earlier than the SC‐crystal in the mixture within the measured temperature range, which is different from the melting crystallization. The final crystalline structures are in correspondence with the melting and cold crystallization temperature, and the transition of homo‐PLA (δ to α) is not altered by the crystallization procedure. The SC‐crystal can be detected in both cold and melting crystallization of the mixture at the temperatures lower than 150 °C, which is conflict with the reported results. A new crystallization mechanism of the mixture was proposed to understand the crystallization behaviors in PLLA/PDLA mixtures. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45663.     

Mechanical properties and crystallization behavior of poly(lactic acid) blended with dendritic hyperbranched polymer

Mechanical properties of poly(lactic acid) (PLA) blended with a small amount of dendritic hyperbranched polymer (DHP) were investigated. Effects of DHP and starch on mechanical properties of PLA were compared. DHP significantly improved tensile strength and elongation at break of PLA. A small amount of starch in PLA slightly improved PLA's elongation, but had no effect on tensile strength. Isothermal crystallization kinetics of PLA blended with DHP and starch were also studied. Both DHP and starch acted as nucleation agents and significantly increased crystallization rate and crystallinity of PLA. Copyright © 2004 Society of Chemical Industry     

Effect of molding conditions on crystallization kinetics and mechanical properties of poly(lactic acid)

Although Poly(lactic acid) (PLA) possesses many desirable properties, above all biodegradability, its heat deflection temperature is too low for many desirable applications. Similarly, to any other polymers, also for PLA the physical and mechanical properties in the solid state depend on the morphology and crystallinity degree, which in their turn are determined by the thermomechanical history experienced during solidification. A large crystallinity degree is highly desirable to increase the heat resistance of PLA but is rather difficult to reach during injection molding due to the very slow crystallization kinetics of this material. In this work, the crystallization kinetics of an injection molded PLA grade was assessed in function of the thermal history by using calorimetric analysis. The cold crystallization kinetics (starting from the amorphous glassy sample) turned out to be faster than melt crystallization kinetics. Following the indications gained from crystallization kinetics, some samples were injection molded imposing different thermal histories. The effect of molding conditions on crystallinity was determined. This finding was adopted to develop a post‐molding stage which allows obtaining crystalline samples in times much shorter (of a factor about two) with respect to samples injection molded in a hot mold kept at temperatures close to the maximum crystallization rate. POLYM. ENG. SCI., 57:306–311, 2017. © 2016 Society of Plastics Engineers     

Isothermal crystallization kinetics and spherulite morphologies of poly(lactic acid)/ethylene acrylate copolymer blends

Isothermal crystallization kinetics and spherulite morphologies of partially immiscible blends of poly(lactic acid) (PLA) and ethylene acrylate copolymer (EAC) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. The DSC data obtained was analyzed using the Avrami equation. Crystallization kinetics of PLA from the melt was strongly influenced by the blend composition and the crystallization temperature. At a given crystallization temperature, the overall crystallization rate value was greater in the blends than in PLA suggesting that the presence of EAC enhanced crystallization of PLA. Polarized optical micrographs showed that the crystallization of PLA initially took place at the PLA/EAC interface. At high EAC content (>1 wt %), EAC domains acted as hindrance to crystallization reducing the overall crystallization rate of PLA in the blends. Based on the DSC analysis, the crystallization rate was maximum when PLA blend with 1 wt % EAC was isothermally crystallized at 103 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45487.     

The synthesis of poly (lactic acid)-fulvic acid graft polymer and its effect on the crystallization and performance of poly (lactic acid)

ABSTRACT

The poly (lactic acid)-fulvic acid graft polymer (PLA-FA) was synthesized with lactic acid and fulvic acid (FA). The optimum parameters were determined by orthogonal experiment. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy exhibited that FA was successfully grafted onto PLA. Then, PLA/PLA-FA composites were prepared with PLA-FA as fillers by melt blending. The structure characterization and performance tests demonstrated that PLA-FA effectively enhanced the comprehensive performance of PLA composites. The rheological analysis demonstrated that PLA-FA had plasticization effect. The non-isothermal crystallization kinetics demonstrated that PLA-FA promoted the crystallization rate of PLA composites, improving toughness of PLA composites.     

Effect of biobased and biodegradable nucleating agent on the isothermal crystallization of poly(lactic acid)

The effect of chemically modified thermoplastic starch (CMPS) on the thermal properties and isothermal crystallization kinetics of poly(lactic acid) (PLA) was studied by differential scanning calorimetry (DSC) and compared to that of granular starch and an inorganic nucleating agent, talc. Nucleated PLA showed an additional crystallization of PLA, which affected the melting temperature. The crystallinity and crystallization rate of PLA were considerably enhanced by addition of CMPS, even at 0.1% content, and the amount of the CMPS had little effect on the thermal properties and isothermal crystallization kinetics of PLA. The effect of CMPS as a nucleating agent was comparable to that of granular starch but slightly less than that of talc. However, CMPS can offer a fully biodegradable nucleating agent with no residues remaining for the biobased and biodegradable polymers.     

Crystallization kinetics of chain extended poly(lactic acid)/clay nanocomposites

The poly(lactic acid)/clay nanocomposites (PLACNs) were prepared by melt mixing method, then multiepoxide chain extender (CE) was added into PLACNs to induce the branched structure of poly(lactic acid) (PLA) chains. The nonisothermal cold crystallization and isothermal melting crystallization of PLA, PLACNs, and chain extended PLACNs (CEPLACNs) were characterized by DSC and studied by Avrami analysis. The results showed that the inducing of clay and CE affected the crystallization behavior of PLA in different way. Adding CE increased the overall crystallinity of PLA at cooling process, but clay had an opposite effect. Besides that, the addition of CE and clay increased the crystal nuclei number due to the heterogeneous nucleation mechanism. According to the crystallization kinetics study, the inducing of clay almost no effect on the crystal growth rate of PLA, but the branched structure had a pronounced effect for improving crystal growth rate of PLA. POLYM. COMPOS., 36:2123–2134, 2015. © 2014 Society of Plastics Engineer     

Nonisothermal crystallization kinetics and morphology of poly(ethylene terephthalate) modified with poly(lactic acid)

The nonisothermal crystallization kinetics of poly(ethylene terephthalate) (PET) copolymers modified with poly(lactic acid) (PLA) were investigated with differential scanning calorimetry, and a crystal morphology of the samples was observed with scanning electron microscopy. Waste PET (P100) obtained from postconsumer water bottles was modified with a low‐molecular‐weight PLA. The PET/PLA weight ratio was 90/10 (P90) or 50/50 (P50) in the modified samples. The nonisothermal melt‐crystallization kinetics of the modified samples were compared with those of P100. The segmented block copolymer structure (PET‐b‐PLA‐b‐PET) of the modified samples formed by a transesterification reaction between the PLA and PET units in solution and the length of the aliphatic and aromatic blocks were found to have a great effect on the nucleation mechanism and overall crystallization rate. On the basis of the results of the crystallization kinetics determined by several models (Ozawa, Avrami, Jeziorny, and Liu–Mo) and morphological observations, the crystallization rate of the samples decreased in the order of P50 > P90 > P100, depending on the amount of PLA in the copolymer structure. However, the apparent crystallization activation energies of the samples decreased in the order of P90 > P100 > P50. It was concluded that the nucleation rate and mechanism were affected significantly by the incorporation of PLA into the copolymer structure and that these also had an effect on the overall crystallization energy barrier. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Crystallization of poly(lactic acid) accelerated by cyclodextrin complex as nucleating agent

Poly(lactic acid) (PLA) is a well-known biodegradable and biocompatible polyester with intrinsically slow crystallization rate. To extend its applications to the field where heat resistance is required, increasing the crystallization rate of the material becomes critical. In this note, the nucleation effect of supramolecular inclusion complex (IC), organized by non-covalent interactions through threading α-cyclodextrin molecules onto PLA chains, on the crystallization of PLA was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. The formation of IC was confirmed by wide-angle X-ray diffraction and DSC measurements. It was found that the presence of PLA-IC significantly promoted the crystallization of PLA from both the non-isothermal and isothermal crystallization experiments. The nucleation mechanism was also discussed to some extent.     

成核剂TMC-328及TMC-300对聚乳酸结晶性能的影响

通过考察市售的成核剂品种TMC-328与TMC-300对聚乳酸结晶的影响发现,这两种成核剂对聚乳酸结晶均有促进作用,对聚乳酸的抗冲击性也均有提高。     

Improving mechanical performance of injection molded PLA by controlling crystallinity

Currently, use of poly(lactic acid) (PLA) for injection molded articles is limited for commercial applications because PLA has a slow crystallization rate when compared with many other thermoplastics as well as standard injection molding cycle times. The overall crystallization rate and final crystallinity of PLA were controlled by the addition of physical nucleating agents as well as optimization of injection molding processing conditions. Talc and ethylene bis‐stearamide (EBS) nucleating agents both showed dramatic increases in crystallization rate and final crystalline content as indicated by isothermal and nonisothermal crystallization measurements. Isothermal crystallization half‐times were found to decrease nearly 65‐fold by the addition of only 2% talc. Process changes also had a significant effect on the final crystallinity of molded neat PLA, which was shown to increase from 5 to 42%. The combination of nucleating agents and process optimization not only resulted in an increase in final injection molded crystallinity level, but also allowed for a decreased processing time. An increase of over 30°C in the heat distortion temperature and improved strength and modulus by upwards of 25% were achieved through these material and process changes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Crystallization of poly(lactic acid) enhanced by phthalhydrazide as nucleating agent

The effect of phthalhydrazide compound on the nonisothermal and isothermal crystallization behavior of bio-based and biodegradable poly(lactic acid) (PLA) was investigated by differential scanning calorimetry and polarized optical microscopy. The nonisothermal melt crystallization of PLA started much earlier in the presence of phthalhydrazide even at a phthalhydrazide content as low as 0.1 wt%. The isothermal crystallization kinetics was analyzed by the Avrami model. It was found that the Avrami exponent of the PLA crystallization was not significantly influenced by the addition of phthalhydrazide, indicating that the crystallization mechanism almost did not change in the composites. The crystallization half-time of PLA/phthalhydrazide composites decreased significantly with increase in phthalhydrazide loading. The observation from optical microscopy showed that the presence of phthalhydrazide increased the number of nucleation sites. The above observations indicate that phthalhydrazide is an efficient nucleating agent of PLA.     

苯基磷酸锌对聚乳酸结晶行为影响的研究

采用DSC,POM研究了成核剂苯基磷酸锌（PPZn）对聚乳酸结晶行为的影响。结果表明：PPZn可以作为聚乳酸的高效成核剂,PPZn的加入显著提高了聚乳酸的结晶速率和结晶度。当PPZn的质量分数为5％0时TCs（起始结晶温度）降低了约24℃,TCe（终止结晶温度）降低了约29℃。PPZn的加入使聚乳酸的半结晶时间大大缩短。当PPZn的质量分数为2％时,结晶速率常数增大约5个数量级。     

Non-isothermal crystallization kinetics of poly (lactic acid)/modified carbon black composite

A novel method was employed to modify the surface of carbon black (CB) by an organic small molecule in a Haake Rheomix mixer. Jeziorny equation, the Ozawa model and Mo equation were employed to describe the non-isothermal crystallization process of poly (lactic acid) (PLA), PLA/CB and PLA/modified carbon black (MCB) composites. It is found that the Ozawa model fail to describe the non-isothermal crystallization process for PLA and its composites, while Jeziorny equation and Mo’s theory provide a good fitting. The comparison of crystallization kinetics between PLA/MCB and PLA through Lauritzen–Hoffman model indicates that there appears a transition from regimes II to III in PLA and PLA/MCB. The fold surface free energy σ _e of PLA/MCB composite is higher than that of neat PLA, implying that the existence of nucleating agent is unfavorable for the regular folding of the molecule chain.     

氨基酯类弹性体对聚乳酸结晶性能的影响

研究了聚乳酸（PLA）与氨基酯类弹性体共混材料的冷结晶性能,探讨了氨基酯类弹性体含量及升温速率对PLA结晶速率和结晶度的影响。结果表明,氨基酯类弹性体可诱导PLA的结晶,加快其结晶过程。随着氨基酯类弹性体含量的增加,PLA的结晶速率降低,结晶度下降;且升温速率越快,PLA越难结晶。     

Crystallization morphology and crystallization kinetics of poly(lactic acid): effect of <Emphasis Type="Italic">N</Emphasis>-Aminophthalimide as nucleating agent

The effect of N-Aminophthalimide compound (NA-S) as nucleating agent on crystallization behavior and morphology of poly(lactic acid) was studied. With polarized optical microscope (POM), the unique phenomena of nucleation and epitaxial crystallization of PLA/NA-S system were observed. Dynamic morphology of crystallization was also studied by POM to investigate the relationship between growth behavior of PLA and nucleating agent. Isothermal and non-isothermal crystallization behavior of PLA were studied by differential scan calorimeter (DSC). When nucleating agent was added, a new peak appeared in wide angle X-ray diffraction (WAXD) compared with pure PLA, indicating the nucleating effect of NA-S on crystallization of PLA. All the results indicate that the nucleating agent of NA-S shows obvious nucleating effect on isothermal crystallization above 120 °C and in non-isothermal crystallization after it is added in PLA, that is, the induction crystallization time is reduced, the crystallization rate and nucleation density of PLA are increased.