反向泵浦光纤拉曼放大器的实现与传输实验

文章设计并实现了C L波段4泵浦光纤拉曼放大器(FRA),讨论了泵浦驱动电路的设计及掺铒光纤放大器(EDFA)与FRA 150 km混合传输的传输性能.实验结果表明,驱动电路可以稳定可靠地工作,当拉曼放大器的增益＜5 dB时,信号的误码性能不会得到显著提高.实验结果可为EDFA与FRA混合传输系统中增益的配置提供参考.     

宽带混合放大器设计及其性能分析

为了获得具有高增益、低噪声和增益平坦度良好等特性的宽带混合放大器,分别采用EDFA(掺铒光纤放大器)与FRA(光纤拉曼放大器)理论模型,设计了EDFA+FRA HFA(混合放大器)的结构,搭建了HFA系统,优化了HFA性能参数,研究了HFA的增益、带宽、平坦度和噪声指数等重要性能。通过FRA增益斜率与EDFA增益斜率进行互补,HFA的各项性能指标集中了EDFA和FRA的优点,弥补了各自的不足,这对高速率、大容量和宽带宽的长距离光纤通信具有重要意义。     

基于EDFA和级联RFA的混合光纤放大器的设计

基于EDFA的理论模型和受激拉曼散射效应的分析理论,利用EDFA和RFA的增益谱互补特性,对拉曼光纤放大器(RFA)采用两根光纤级联方式,研究并设计了EDFA与级联光纤的RFA相结合的混合放大器结构.仿真结果表明:在不使用增益均衡器的条件下,所设计的混合光纤放大器在输出端得到了近似相等的输出光功率,得到了增益平坦度为0.62 dB、波长带宽为70 nm(1 550～1 620 nm)的结果,在密集波分复用光通信系统中有重要的应用价值.     

运用长周期光纤光栅实现EDFA的增益平坦化

针对Perilli公司生产的OP 980型掺铒光纤放大器 (EDFA)的增益谱不平坦特性 ,运用紫外写入的方法研制成使其增益平坦化的长周期光纤光栅增益平坦化器件 ,实现了该掺铒光纤放大器在 30nm范围内的增益谱波动小于± 0 4dB。     

混合(FRA-EDFA)光纤放大器的设计研究

基于拉曼光纤放大器(FRA)与掺饵光纤放大器(EDFA)的原理、模型,分析了由分布式拉曼光纤放大器和掺饵光纤放大器组成的混合光纤放大器,提出了设计因素的考虑和优化.     

一种新的优化喇曼掺Er混合光纤放大器结构

对于给定的非线性损伤，对喇曼／掺Er混合光纤放大器(HFA)结构进行优化，即优化光纤喇曼放大器(FRA)与掺Er光纤放大器(EDFA)的增益比和色散补偿光纤(DCF)长度比，得到一种最优HFA结构。分别比较了最优HFA、一般HFA、全FRA和全EDFA用作接收机前置放大器的噪声性能，以及用于多级链路在线放大器时系统所能到达的最大可传输距离。结果表明，最优HFA能提高系统性能。     

基于光纤环形镜的掺铒光纤放大器增益平坦化

理论和实验上简要分析研究了由两段保偏光纤组成的光纤环形镜的反射谱特性,提出了利用保偏光纤环形镜进行掺铒光纤放大器(EDFA)增益平坦化的方法。应用该方法,在1527～1562nm范围内,EDFA自发辐射谱的不平坦度为±1dB。     

前途光明的宽带混合光纤放大器

由掺铒光纤放大器（EDFA）和光纤嗽曼放大器（FRA）构成的宽带混合光纤放大器（Wideband Hybrid Fiber Amplidfier)具有高增益,宽带宽,低噪声,高输出功率等优点,是今后光纤放大器的发展方向,本文概括院落带混合光纤放大器的典型结构。综合报道了近年来的研究进展和最新发展动态,最后展望了这种混合放大器的应用前景。     

基于级联光纤环形镜的增益平坦掺铒光纤放大器

基于光纤环形镜的滤波原理,提出利用级联结构光纤环形镜(FLM)实现掺铒光纤放大器(EDFA)增益平坦滤波的方案,并进行了相关实验研究.实验结果显示,使用级联FLM取得了明显的增益平坦效果,其1535-1557nm波长范围内的增益不平坦度由±5dB减小到±1dB.     

基于光纤环形镜的L-波段掺铒光纤放大器增益的提高

提出了一种基于光纤环形镜作为反射器的反射式L-波段掺铒光纤放大器(EDFA)结构。光纤环形镜不但可以反射后向放大自发辐射(ASE)作为二次抽运源，而且还可以反射信号，使信号得到二次放大。当抽运功率为115mW时。在1570～1605nm波长范围内，反射式L-波段掺铒光纤放大器的平坦小信号增益达到29．14dB，与前向抽运方式L-波段掺铒光纤放大器相比(保持平坦性不变)。增益提高了5．33dB。分别输入波长为1580nm和1600nm的信号，反射式L-波段掺铒光纤放大器的饱和输出功率为7．63和7．6dBm．与前向抽运方式L-波段掺铒光纤放大器相比分别提高了2．98和3dB。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.