A frequency-domain approach for modelling transient elastodynamics using scaled boundary finite element method

This study develops a frequency-domain method for modelling general transient linear-elastic dynamic problems using the semi-analytical scaled boundary finite element method (SBFEM). This approach first uses the newly-developed analytical Frobenius solution to the governing equilibrium equation system in the frequency domain to calculate complex frequency-response functions (CFRFs). This is followed by a fast Fourier transform (FFT) of the transient load and a subsequent inverse FFT of the CFRFs to obtain time histories of structural responses. A set of wave propagation and structural dynamics problems, subjected to various load forms such as Heaviside step load, triangular blast load and ramped wind load, are modelled using the new approach. Due to the semi-analytical nature of the SBFEM, each problem is successfully modelled using a very small number of degrees of freedom. The numerical results agree very well with the analytical solutions and the results from detailed finite element analyses.     

Modelling dynamic crack propagation using the scaled boundary finite element method

This study presents a novel application of the scaled boundary finite element method (SBFEM) to model dynamic crack propagation problems. Accurate dynamic stress intensity factors are extracted directly from the semi‐analytical solutions of SBFEM. They are then used in the dynamic fracture criteria to determine the crack‐tip position, velocity and propagation direction. A simple, yet flexible remeshing algorithm is used to accommodate crack propagation. Three dynamic crack propagation problems that include mode‐I and mix‐mode fracture are modelled. The results show good agreement with experimental and numerical results available in the literature. It is found that the developed method offers some advantages over conventional FEM in terms of accuracy, efficiency and ease of implementation. Copyright © 2011 John Wiley & Sons, Ltd.     

Polygon scaled boundary finite elements for crack propagation modelling

An automatic crack propagation modelling technique using polygon elements is presented. A simple algorithm to generate a polygon mesh from a Delaunay triangulated mesh is implemented. The polygon element formulation is constructed from the scaled boundary finite element method (SBFEM), treating each polygon as a SBFEM subdomain and is very efficient in modelling singular stress fields in the vicinity of cracks. Stress intensity factors are computed directly from their definitions without any nodal enrichment functions. An automatic remeshing algorithm capable of handling any n‐sided polygon is developed to accommodate crack propagation. The algorithm is simple yet flexible because remeshing involves minimal changes to the global mesh and is limited to only polygons on the crack paths. The efficiency of the polygon SBFEM in computing accurate stress intensity factors is first demonstrated for a problem with a stationary crack. Four crack propagation benchmarks are then modelled to validate the developed technique and demonstrate its salient features. The predicted crack paths show good agreement with experimental observations and numerical simulations reported in the literature. Copyright © 2012 John Wiley & Sons, Ltd.     

A scaled boundary finite element formulation for dynamic elastoplastic analysis

This study presents the development of the scaled boundary finite element method (SBFEM) to simulate elastoplastic stress wave propagation problems subjected to transient dynamic loadings. Material nonlinearity is considered by first reformulating the SBFEM to obtain an explicit form of shape functions for polygons with an arbitrary number of sides. The material constitutive matrix and the residual stress fields are then determined as analytical polynomial functions in the scaled boundary coordinates through a local least squares fit to evaluate the elastoplastic stiffness matrix and the residual load vector semianalytically. The treatment of the inertial force within the solution of the nonlinear system of equations is also presented within the SBFEM framework. The nonlinear equation system is solved using the unconditionally stable Newmark time integration algorithm. The proposed formulation is validated using several benchmark numerical examples.     

Use of higher‐order shape functions in the scaled boundary finite element method

The scaled boundary finite element method is a novel semi‐analytical technique, whose versatility, accuracy and efficiency are not only equal to, but potentially better than the finite element method and the boundary element method for certain problems. This paper investigates the possibility of using higher‐order polynomial functions for the shape functions. Two techniques for generating the higher‐order shape functions are investigated. In the first, the spectral element approach is used with Lagrange interpolation functions. In the second, hierarchical polynomial shape functions are employed to add new degrees of freedom into the domain without changing the existing ones, as in the p‐version of the finite element method. To check the accuracy of the proposed procedures, a plane strain problem for which an exact solution is available is employed. A more complex example involving three scaled boundary subdomains is also addressed. The rates of convergence of these examples under p‐refinement are compared with the corresponding rates of convergence achieved when uniform h‐refinement is used, allowing direct comparison of the computational cost of the two approaches. The results show that it is advantageous to use higher‐order elements, and that higher rates of convergence can be obtained using p‐refinement instead of h‐refinement. Copyright © 2005 John Wiley & Sons, Ltd.     

A continued‐fraction‐based high‐order transmitting boundary for wave propagation in unbounded domains of arbitrary geometry

A high‐order local transmitting boundary is developed to model the propagation of elastic waves in unbounded domains. This transmitting boundary is applicable to scalar and vector waves, to unbounded domains of arbitrary geometry and to anisotropic materials. The formulation is based on a continued‐fraction solution of the dynamic‐stiffness matrix of an unbounded domain. The coefficient matrices of the continued fraction are determined recursively from the scaled boundary finite element equation in dynamic stiffness. The solution converges rapidly over the whole frequency range as the order of the continued fraction increases. Using the continued‐fraction solution and introducing auxiliary variables, a high‐order local transmitting boundary is formulated as an equation of motion with symmetric and frequency‐independent coefficient matrices. It can be coupled seamlessly with finite elements. Standard procedures in structural dynamics are directly applicable for evaluating the response in the frequency and time domains. Analytical and numerical examples demonstrate the high rate of convergence and efficiency of this high‐order local transmitting boundary. Copyright © 2007 John Wiley & Sons, Ltd.     

A semi‐analytical curved element for linear elasticity based on the scaled boundary finite element method

This work introduces a semi‐analytical formulation for the simulation and modeling of curved structures based on the scaled boundary finite element method (SBFEM). This approach adapts the fundamental idea of the SBFEM concept to scale a boundary to describe a geometry. Until now, scaling in SBFEM has exclusively been performed along a straight coordinate that enlarges, shrinks, or shifts a given boundary. In this novel approach, scaling is based on a polar or cylindrical coordinate system such that a boundary is shifted along a curved scaling direction. The derived formulations are used to compute the static and dynamic stiffness matrices of homogeneous curved structures. The resulting elements can be coupled to general SBFEM or FEM domains. For elastodynamic problems, computations are performed in the frequency domain. Results of this work are validated using the global matrix method and standard finite element analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

The scaled boundary finite element method in structural dynamics

The scaled boundary finite element method is extended to solve problems of structural dynamics. The dynamic stiffness matrix of a bounded (finite) domain is obtained as a continued fraction solution for the scaled boundary finite element equation. The inertial effect at high frequencies is modeled by high‐order terms of the continued fraction without introducing an internal mesh. By using this solution and introducing auxiliary variables, the equation of motion of the bounded domain is expressed in high‐order static stiffness and mass matrices. Standard procedures in structural dynamics can be applied to perform modal analyses and transient response analyses directly in the time domain. Numerical examples for modal and direct time‐domain analyses are presented. Rapid convergence is observed as the order of continued fraction increases. A guideline for selecting the order of continued fraction is proposed and validated. High computational efficiency is demonstrated for problems with stress singularity. Copyright © 2008 John Wiley & Sons, Ltd.     

A unified 3D‐based technique for plate bending analysis using scaled boundary finite element method

This paper presents a unified technique for solving the plate bending problems by extending the scaled boundary finite element method. The formulation is based on the three‐dimensional governing equation without enforcing the kinematics of plate theory. Only the in‐plane dimensions are discretised into finite elements. Any two‐dimensional displacement‐based elements can be employed. The solution along the thickness is expressed analytically by using a matrix function. The proposed technique is consistent with the three‐dimensional theory and applicable to both thick and thin plates without exhibiting the numerical locking phenomenon. Moreover, the use of higher order spectral elements allows the proposed technique to better represent curved boundaries and to achieve high accuracy and fast convergence. Numerical examples of various plate structures with different thickness‐to‐length ratios demonstrate the applicability and accuracy of the proposed technique. Copyright © 2012 John Wiley & Sons, Ltd.     

An improved continued‐fraction‐based high‐order transmitting boundary for time‐domain analyses in unbounded domains

A high‐order local transmitting boundary to model the propagation of acoustic or elastic, scalar or vector‐valued waves in unbounded domains of arbitrary geometry is proposed. It is based on an improved continued‐fraction solution of the dynamic stiffness matrix of an unbounded medium. The coefficient matrices of the continued‐fraction expansion are determined recursively from the scaled boundary finite element equation in dynamic stiffness. They are normalised using a matrix‐valued scaling factor, which is chosen such that the robustness of the numerical procedure is improved. The resulting continued‐fraction solution is suitable for systems with many DOFs. It converges over the whole frequency range with increasing order of expansion and leads to numerically more robust formulations in the frequency domain and time domain for arbitrarily high orders of approximation and large‐scale systems. Introducing auxiliary variables, the continued‐fraction solution is expressed as a system of linear equations in iω in the frequency domain. In the time domain, this corresponds to an equation of motion with symmetric, banded and frequency‐independent coefficient matrices. It can be coupled seamlessly with finite elements. Standard procedures in structural dynamics are directly applicable in the frequency and time domains. Analytical and numerical examples demonstrate the superiority of the proposed method to an existing approach and its suitability for time‐domain simulations of large‐scale systems. Copyright © 2011 John Wiley & Sons, Ltd.     

Fully automatic modelling of mixed-mode crack propagation using scaled boundary finite element method

The newly-developed scaled boundary finite element method (SBFEM) is able to calculate stress intensity factors directly because the singularity in stress solutions at crack tips is analytically represented. By taking this advantage, a mixed-mode crack propagation model based on linear elastic fracture mechanics (LEFM) was developed in this study. A domain is first divided into a few subdomains. Because the dimensions and shapes of subdomains can be flexibly varied and only the domain boundaries or common edges between subdomains are discretised in the SBFEM, a remeshing procedure as simple as in boundary element methods was developed with minimum mesh changes whereas the generality and flexibility of the FEM is well maintained. Fully-automatic modelling of mixed-mode crack propagation is then achieved by combining the remeshing procedure with a propagation criterion. Three mixed-mode examples were modelled. Comparisons of the numerical results with those from available publications show that the developed model is capable of predicting crack trajectories and load-displacement relations accurately and efficiently.     

A scaled boundary finite element formulation for poroelasticity

This paper develops the scaled boundary finite element formulation for applications in coupled field problems, in particular, to poroelasticity. The salient feature of this formulation is that it can be applied over arbitrary polygons and/or quadtree decomposition, which is widely employed to traverse between small and large scales. Moreover, the formulation can treat singularities of any order. Within this framework, 2 sets of semianalytical, scaled boundary shape functions are used to interpolate the displacement and the pore fluid pressure. These shape functions are obtained from the solution of vector and scalar Laplacian, respectively, which are then used to discretise the unknown field variables similar to that of the finite element method. The resulting system of equations are similar in form as that obtained using standard procedures such as the finite element method and, hence, solved using the standard procedures. The formulation is validated using several numerical benchmarks to demonstrate its accuracy and convergence properties.     

Modelling crack propagation in reinforced concrete using a hybrid finite element–scaled boundary finite element method

A previously developed hybrid finite element–scaled boundary finite element method (FEM–SBFEM) is extended to model multiple cohesive crack propagation in reinforced concrete. This hybrid method can efficiently extract accurate stress intensity factors from the semi-analytical solutions of SBFEM and is also flexible in remeshing multiple cracks. Crack propagation in the concrete bulk is modelled by automatically inserted cohesive interface elements with nonlinear softening laws. The concrete–reinforcement interaction is also modelled by cohesive interface elements. The bond shear stress–slip relation of CEB-FIP Model Code 90 and an empirical confining stress–crack opening relation are used to characterise slip and split failure at the concrete–reinforcement interface, respectively. Three RC beams were simulated. The numerical results agreed well with both experimental and numerical results available in the literature. Parametric studies demonstrated the importance of modelling both slip and split failure mechanisms at the concrete–reinforcement interface.     

A p‐hierarchical adaptive procedure for the scaled boundary finite element method

This paper describes a p‐hierarchical adaptive procedure based on minimizing the classical energy norm for the scaled boundary finite element method. The reference solution, which is the solution of the fine mesh formed by uniformly refining the current mesh element‐wise one order higher, is used to represent the unknown exact solution. The optimum mesh is assumed to be obtained when each element contributes equally to the global error. The refinement criteria and the energy norm‐based error estimator are described and formulated for the scaled boundary finite element method. The effectivity index is derived and used to examine quality of the proposed error estimator. An algorithm for implementing the proposed p‐hierarchical adaptive procedure is developed. Numerical studies are performed on various bounded domain and unbounded domain problems. The results reflect a number of key points. Higher‐order elements are shown to be highly efficient. The effectivity index indicates that the proposed error estimator based on the classical energy norm works effectively and that the reference solution employed is a high‐quality approximation of the exact solution. The proposed p‐hierarchical adaptive strategy works efficiently. Copyright © 2007 John Wiley & Sons, Ltd.     

Automatic image‐based stress analysis by the scaled boundary finite element method

Digital imaging technologies such as X‐ray scans and ultrasound provide a convenient and non‐invasive way to capture high‐resolution images. The colour intensity of digital images provides information on the geometrical features and material distribution which can be utilised for stress analysis. The proposed approach employs an automatic and robust algorithm to generate quadtree (2D) or octree (3D) meshes from digital images. The use of polygonal elements (2D) or polyhedral elements (3D) constructed by the scaled boundary finite element method avoids the issue of hanging nodes (mesh incompatibility) commonly encountered by finite elements on quadtree or octree meshes. The computational effort is reduced by considering the small number of cell patterns occurring in a quadtree or an octree mesh. Examples with analytical solutions in 2D and 3D are provided to show the validity of the approach. Other examples including the analysis of 2D and 3D microstructures of concrete specimens as well as of a domain containing multiple spherical holes are presented to demonstrate the versatility and the simplicity of the proposed technique. Copyright © 2016 John Wiley & Sons, Ltd.     

A modified scaled boundary finite element method for three‐dimensional dynamic soil‐structure interaction in layered soil

This paper is devoted to the analysis of elastodynamic problems in 3D‐layered systems which are unbounded in the horizontal direction. For this purpose, a finite element model of the near field is coupled to a scaled boundary finite element model (SBFEM) of the far field. The SBFEM is originally based on describing the geometry of a half‐space or full‐space domain by scaling the geometry of the near field / far field interface using a radial coordinate. A modified form of the SBFEM for waves in a 2D layer is also available. None of these existing formulations can be used to describe a 3D‐layered medium. In this paper, a modified SBFEM for the analysis of 3D‐layered continua is derived. Based on the use of a scaling line instead of a scaling centre, a suitable scaled boundary transformation is proposed. The derivation of the corresponding scaled boundary finite element (SBFE) equations in displacement and stiffness is presented in detail. The latter is a nonlinear differential equation with respect to the radial coordinate, which has to be solved numerically for each excitation frequency considered in the analysis. Various numerical examples demonstrate the accuracy of the new method and its correct implementation. These include rigid circular and square foundations embedded in or resting on the surface of layered homogeneous or inhomogeneous 3D soil deposits over rigid bedrock. Hysteretic damping is assumed in some cases. The dynamic stiffness coefficients calculated using the proposed method are compared with analytical solutions or existing highly accurate numerical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of high‐order finite elements for convected wave propagation

In this paper, we examine the performance of high‐order finite element methods (FEM) for aeroacoustic propagation, based on the convected Helmholtz equation. A methodology is presented to measure the dispersion and amplitude errors of the p‐FEM, including non‐interpolating shape functions, such as ‘bubble’ shape functions. A series of simple test cases are also presented to support the results of the dispersion analysis. The main conclusion is that the properties of p‐FEM that make its strength for standard acoustics (e.g., exponential p‐convergence, low dispersion error) remain present for flow acoustics as well. However, the flow has a noticeable effect on the accuracy of the numerical solution, even when the change in wavelength due to the mean flow is accounted for, and an approximation of the dispersion error is proposed to describe the influence of the mean flow. Also discussed is the so‐called aliasing effect, which can reduce the accuracy of the solution in the case of downstream propagation. This can be avoided by an appropriate choice of mesh resolution. Copyright © 2013 John Wiley & Sons, Ltd.     

An optimal high‐order non‐reflecting finite element scheme for wave scattering problems

A new finite element scheme is proposed for the numerical solution of time‐harmonic wave scattering problems in unbounded domains. The infinite domain in truncated via an artificial boundary ?? which encloses a finite computational domain Ω. On ?? a local high‐order non‐reflecting boundary condition (NRBC) is applied which is constructed to be optimal in a certain sense. This NRBC is implemented in a special way, by using auxiliary variables along the boundary ??, so that it involves no high‐order derivatives regardless of its order. The order of the scheme is simply an input parameter, and it may be arbitrarily high. This leads to a symmetric finite element formulation where standard C⁰ finite elements are used in Ω. The performance of the method is demonstrated via numerical examples, and it is compared to other NRBC‐based schemes. The method is shown to be highly accurate and stable, and to lead to a well‐conditioned matrix problem. Copyright © 2002 John Wiley & Sons, Ltd.     

A scaled boundary finite element based explicit topology optimization approach for three-dimensional structures

This article proposes an efficient approach for solving three-dimensional (3D) topology optimization problem. In this approach, the number of design variables in optimization as well as the number of degrees of freedom in structural response analysis can be reduced significantly. This is accomplished through the use of scaled boundary finite element method (SBFEM) for structural analysis under the moving morphable component (MMC)-based topology optimization framework. In the proposed method, accurate response analysis in the boundary region dictates the accuracy of the entire analysis. In this regard, an adaptive refinement scheme is developed where the refined mesh is only used in the boundary region while relating coarse mesh is used away from the boundary. Numerical examples demonstrate that the computational efficiency of 3D topology optimization can be improved effectively by the proposed approach.