Paclitaxel-loaded nanoparticles of star-shaped cholic acid-core PLA-TPGS copolymer for breast cancer treatment

A system of novel nanoparticles of star-shaped cholic acid-core polylactide-d-α-tocopheryl polyethylene glycol 1000 succinate (CA-PLA-TPGS) block copolymer was developed for paclitaxel delivery for breast cancer treatment, which demonstrated superior in vitro and in vivo performance in comparison with paclitaxel-loaded poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles and linear PLA-TPGS nanoparticles. The paclitaxel- or couramin 6-loaded nanoparticles were fabricated by a modified nanoprecipitation method and then characterized in terms of size, surface charge, surface morphology, drug encapsulation efficiency, and in vitro drug release. The CA-PLA-TPGS nanoparticles were found to be spherical in shape with an average size of around 120 nm. The nanoparticles were found to be stable, showing no change in the particle size and surface charge during 90-day storage of the aqueous solution. The release profiles of the paclitaxel-loaded nanoparticles exhibited typically biphasic release patterns. The results also showed that the CA-PLA-TPGS nanoparticles have higher antitumor efficacy than the PLA-TPGS nanoparticles and PLGA nanoparticles in vitro and in vivo. In conclusion, such nanoparticles of star-shaped cholic acid-core PLA-TPGS block copolymer could be considered as a potentially promising and effective strategy for breast cancer treatment.     

Synthesis and characterization of N‐methyl‐2‐nitrodiphenylamine‐4‐diazonium salt and its diazoresin

A new substituted diphenylamine diazonium salt, N‐methyl‐2‐nitrodiphenylamine‐4‐diazonium salt (MNDDS) and its diazoresin (MNDDS‐resin) were synthesized and their thermostability as well as photosensitivity were investigated. The results show that MNDDS and resin exhibit much higher thermostability than that of the parent compound, diphenylamine‐4‐diazonium salt (DDS) and resin (DDS resin) in solid state or in coating but the photosensitivities of them are confirmed to be in same level. The excellent thermostability of MNDDS and its diazoresin is very important because the storage life of a negative presensitized plate is mainly dependent on it. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 189–193, 1999     

Dual responsive polymeric bionanocomposite gel beads for controlled drug release systems

Scientists are searching potential solutions for cancer treatments as well as ways to avoid the side effects of anti‐cancer agents, via targeted drug delivery. The aim of this research is to propose dual responsive beads based on sodium alginate (SA), methylcellulose (MC), and magnetic iron oxide nanoparticles (MIONs) for controlled release of 5‐Fluorouracil (5‐FU) as model drug. The beads were prepared by the dual crosslinking of SA and MC in the presence of MIONs. The structural, thermal, morphological, magnetic characteristics as well as the release profile of 5‐FU were studied. The characterization results showed that the drug molecules and MIONs were well dispersed in the polymeric matrix. The cumulative release percentage was ca. 80% at pH = 4.2 and 40% at pH = 7.2 after 6 h. Thus, the sensitivity of beads on the pH value was verified. Moreover, the release profile exhibited reduction with an increase in the concentration of MIONs under an external magnetic field. The obtained results confirmed the dual sensitive release of 5‐FU (i.e., PH/magnetic) that can be used for the targeted and controlled drug delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45143.     

Application of magnetic iron oxide nanoparticles prepared from microemulsions for protein purification

BACKGROUND: Magnetic nanoparticles are of immense interest for their applications in biotechnology. This paper reports the synthesis of magnetic iron oxide nanoparticles from two different water‐in‐oil microemulsion systems (ME‐MIONs), their characterization and also their use in purification of coagulant protein. RESULTS: ME‐MIONs have demonstrated to be an efficient binder in the purification of Moringa oleifera protein when compared with the superparamagnetic iron oxide nanoparticles prepared from coprecipitation in aqueous media. The size and morphology of the ME‐MIONs were studied by transmission electron microscopy (TEM) while the structural characteristics were studied by X‐ray diffraction (XRD). The microemulsion magnetic iron oxide nanoparticles (ME 1‐MION and ME 2‐MION) obtained have a size range 7–10 nm. The protein and ME‐MIONs interaction was investigated by Fourier transform infrared spectroscopy (FT‐IR); the presence of three peaks at 2970, 2910 and 2870 cm^?1 respectively, confirms the binding of the protein. The purification and molecular weight of the coagulant protein was 6.5 kDa as analyzed by SDS‐PAGE. CONCLUSION: The ME‐MIONs have the advantage of being easily tailored in size, are highly efficient as well as magnetic, cost effective and versatile; they are, thus, very suitable for use in a novel purification technique for protein or biomolecules that possess similar characteristics to the Moringa oleifera coagulant protein. Copyright © 2011 Society of Chemical Industry     

Synthesis of biomimetic hyperbranched zwitterionic polymers as targeting drug delivery carriers

Novel biomimetic hyperbranched copolymers that synthesized by polymerization of zwitterionic monomer (CBB) on the surface of a hyperbranched poly(3‐ethyl‐3‐(hydroxymethyl)oxetane) (HBPO) core and used as a drug delivery carrier have been investigated by analysis of protein‐adsorption‐resistance, cytotoxicity and cell type‐specific targeting properties. The as‐synthesized biomimetic hyperbranched copolymers showed low toxicity, favorable protein resistant properties and were ultrastable in 100% fetal bovine serum. Folic acid and rodiamin‐B were conjugated to the surface of synthesized micelles to endow it with target drug delivery and fluorescence activity, respectively. Intracellular uptake and in vitro cytotoxicity of HBPO‐poly(carboxybetaine) micelles were investigated. Doxorubicin was used as a model drug for Hela cells during the experiment. All results show that the biomimetic hyperbranched copolymer is a candidate carrier for target drug delivery. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Hollow poly(N‐isopropylacrylamide)‐co‐poly(acrylic acid) microgels with high loading capacity for drugs

A convenient approach has been developed for the preparation of microsize hydrogels composed of crosslinked poly(acrylic acid) (PAA) and poly(N‐isopropylacrylamide) (PNIPAm). First, semi‐interpenetration polymer networks of hydropropylcellulose (HPC) and PNIPAm‐co‐PAA copolymer are formed through the copolymerization and crosslinking of monomer acrylic acid and N‐isopropylacrylamide in HPC aqueous solution. After the selective removal of HPC from networks due to ionization of PAA units and disruption of hydrogen bonding with increasing pH, PNIPAm‐co‐PAA microgels are obtained, whose volume is confirmed to be responsive to both temperature and pH. Doxorubicin hydrochloride (Dox) can be encapsulated in PNIPAm‐co‐PAA microgels with high drug loading driven by the electrostatic interaction, and a sustained‐release characteristic of Dox from the microgels is observed under physiological pH value and temperature. In vitro cell experiments, the drug‐loaded microgels can be taken up by LoVo cells and release their payload in cell cytoplasm without loss of drug efficacy. This indicates that PNIPAm‐co‐PAA microgels might be a potential drug delivery carriers especially for water‐soluble or polypeptide drugs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of chitosan‐graft‐β‐cyclodextrin for improving the loading and release of doxorubicin in the nanopaticles

Chitosan‐graft‐β‐cyclodextrin (CS‐g‐β‐CD) copolymer was synthesized by conjugating β‐cyclodextrins to chitosan molecules through click chemistry. The copolymer structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). CS‐g‐β‐CD/CMC nanoparticles were prepared by a polyelectrolyte complexation process in aqueous solution between CS‐g‐β‐CD copolymer and carboxymethyl chitosan (CMC), which was used to load anticancer drug (Doxorubicin hydrochloride, DOX·HCl) with hydrophobic group. The particle size, surface charge, zeta potential, and morphology of the nanoparticles were characterized with dynamic light scattering. The drug loading efficiency and in vitro release of DOX·HCl of the nanoparticles were measured by ultraviolet spectrophotometer. The results demonstrated that the size, surface charge and drug loading efficiency of the nanoparticles could be modulated by the fabrication conditions. The drug loading efficiency of CS‐g‐β‐CD/CMC nanoparticles was improved from 52.7% to 88.1% because of the presence of β‐CD moieties with hydrophobic cavities, which can form inclusion complexes with the drug molecules. The in vitro release results showed that the CS‐g‐β‐CD/CMC nanoparticles released DOX·HCl in a controlled manner, importantly overcoming the initial burst effect. These nanoparticles possess much potential to be developed as anticancer drug delivery systems, especially those drugs with hydrophobic group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41034.     

枝化-环化结构共聚物用于酸响应载药体系

将溴代聚乙二醇(PEG2000Br)和缩醛化物二(2-丙烯酰氧基乙氧基)-(4-甲氧基苯基)甲烷(ACD)分别作为引发剂和单体,采用逆向增强原子转移自由基聚合(DE-ATRP)法得到嵌段共聚物聚乙二醇-b-聚[二(2-丙烯酰氧基乙氧基)-(4-甲氧基苯基)甲烷](PEG-b-PACDs)。通过核磁共振氢谱和凝胶渗透色谱表征了该聚合物的结构;用动态光散射和透射电镜表征了胶束的尺寸和形貌。结果表明,聚合物呈现枝化-环化结构,空白胶束的尺寸在70 nm左右,载药胶束尺寸在90 nm左右,胶束的药物包封率为48.7%。在pH为7.4时透析48 h后,药物释放率只有32.5%,在pH为5.4时透析48 h后,药物释放率为68.3%,表明共聚物在酸性条件下具有良好的药物缓释性。     

Dual stimuli-responsive poly(succinyloxyethylmethacrylate-b-N-isopropylacrylamide) block copolymers as nanocarriers and respective application in doxorubicin delivery

Stimuli-responsive nanostructures were developed as anticancer drug delivery carriers. To this end, poly(2-hydroxyethylmethacrylate)-b-(N-isopropylacrylamide) (poly(HEMA-b-NIPAAm)) diblock copolymers were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with two ratios remarked with (1) and (2). Based on gel permeation chromatography, the molecular weights of synthesized diblock copolymers were 17802 (1) and 13090 (2) g?mol^?1. The pH- and thermoresponsive poly(succinyloxyethylmethacrylate-b-N-isopropylacrylamide) (poly)SEMA-b-NIPAAm)) diblock copolymers were obtained by reacting poly(HEMA-b-NIPAAm) with excess succinic anhydride in pyridine under mild conditions. Developed micelles with poly(SEMA-b-NIPAAm) (1) and poly(SEMA-b-NIPAAm) (2) diblock copolymers around pH of 3–4 at 25°C demonstrated the critical micelles concentrations (CMCs) of 0.026 and 0.019?g?L^?1, respectively. The average sizes of poly)SEMA-b-NIPAAm) micelles using dynamic light scattering (DLS) measurements at pH 3.0, 6.0, and 9.0 were 240, 190, and 150?nm, respectively. The core-shell poly(SEMA-b-NIPAAm) micelles at pH 3 and 9 were 100–200?nm. The lower critical solution temperature (LCST) of poly)SEMA-b-NIPAAm) sample was determined to be 40°C by ultraviolet-visible (UV-vis) spectroscopy. The micelles of diblock copolymers were formed to enhance the drug solubility in aqueous solutions. Doxorubicin hydrochloride (DOX)-loading capacity was 99.1%. The release of DOX acted better at 42°C compared to 40°C. The results confirmed that pH- and temperature-dependent release of this drug carrier was particularly useful and important for the anticancer drug delivery at the tumor-like environment. Therefore, the biocompatibility of diblock copolymer was confirmed by assessing survival rate of breast cancer cell line (MCF7) using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The synthesized nanoparticles would have an excellent potential as anticancer drug delivery.     

Reversible addition fragmentation chain transfer-mediated bioconjugated amphiphilic graft-block copolymer using dextran,poly (N-isopropylacrylamide), and poly (vinyl acetate)

RAFT polymerization is a well-known approach to develop amphiphilic copolymer with less heterogeneity and narrow dispersity. Herein, an amphiphilic bioconjugated graft-block copolymer (Dextran-g-(PNIPAAm-b-PVAc)) using dextran, N-isopropyl acrylamide and vinyl acetate has been developed through RAFT polymerization. The chain length of the PVAc block has been varied to obtain the copolymers with different hydrophobic segments. The lower critical solution temperature, critical micelle concentration, and micellar stability of the synthesized copolymers have been studied in details. in-vitro cytotoxicity, as well as the in vitro release of a hydrophobic drug have been carried out to explore its suitability in the field of biomedical science. The synthesized copolymer has been found to have controlled molecular weight with narrow dispersity. It is cytocompatible toward Human cervical cancer cell line cell lines, can efficiently load a hydrophobic drug-norfloxacin, and subsequently, release in the sustained manner as manifested from in vitro release study.     

Drug Release Kinetics and Mechanism from PLGA Formulations

The release kinetics of indomethacin (IND) and hydrochlorothiazide (HCT) from drug/PLGA formulations with different copolymer composition and molecular weight of PLGA were measured in vitro by using a rotating disk system (USP II). The release mechanism of IND and HCT from their PLGA formulations was analyzed using a chemical‐potential‐gradient model combined with the Perturbed‐Chain Statistical Associating Fluid Theory (PC‐SAFT). Furthermore, the release kinetics of IND and HCT from the PLGA formulations with different copolymer composition and molecular weight of PLGA were correlated and predicted in good accordance with the experimental data. It was found that the chemical‐potential‐gradient model combined with the PC‐SAFT helped to understand the drug release mechanism from the drug/PLGA formulations. It also well correlated and predicted the drug release kinetics as function of copolymer composition and molecular weight of PLGA as well as of drug type. It helps to save time and costs for determination of the long‐term drug release kinetics, especially for sustained drug release as obtained from the drug/PLGA formulations in this work. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4055–4065, 2016     

Synthesis and characterization of butyl acrylate/methyl methacrylate/glycidyl methacrylate latexes

The butyl acrylate (BA)/methyl methacrylate (MMA), and glycidyl methacrylate (GMA) composite copolymer latex was synthesized by seeded emulsion polymerization technique taking poly(methyl methacrylate) (PMMA) latex as the seed. Four series of experiments were carried out by varying the ratio of BA : MMA (w/w) (i.e. 3.1 : 1, 2.3 : 1, 1.8 : 1, and 1.5 : 1) and in each series GMA content was varied from 1 to 5% (w/w). The structural properties of the copolymer were analyzed by FTIR, ¹H‐, and ¹³C‐NMR. Morphological characterization was carried out using transmission electron microscopy (TEM). In all the experiments, monomer conversion was ～99% and final copolymer composition was similar to that of feed composition. The incorporation of GMA into the copolymer chain was confirmed by ¹³C‐NMR. The glass transition temperature (T_g) of the copolymer latex obtained from the differential scanning calorimetry (DSC) curve was comparable to the values calculated theoretically. With increase in GMA content, particles having core‐shell morphology were obtained, and there was a decrease in the particle size as we go from 2–5% (w/w) of GMA. The adhesive strength of the latexes was found to be dependent on the monomer composition. With increase in BA : MMA ratio, the tackiness of the film increased while with its decrease the hardness of the film increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of N‐methyl‐2,6‐dinitrodiphenylamine‐4‐diazonium salt and its diazoresin

A new photosensitive agent, dinitro derivatives of diphenylamine diazonium salt (N‐methyl‐2,6‐dinitrodiphenylamine‐4‐diazonium salt, MDNDDS), and its diazoresin were synthesized. Their photoreactivities and thermostabilities were investigated. Our results revealed that MDNDDS and MDNDDS‐resin exhibited greatly improved thermostability both in solid state and in coating film comparing with the conventional unsubstituted and mononitro substituted diphenylamine diazonium salts (DDS and MNDDS, respectively) and their diazoresins. The photosensitivity of MDNDDS was found to be slightly lower than DDS but still comparable with MNDDS. As a result of its improved thermostability, both MDNDDS‐resin as a photosensitive agent and lithographic printing plate prepared by MDNDDS‐resin will have a long shelf‐life, which is very important to reduce waste and factory running‐cost. MDNDDS also has a maximum absorption wavelength (λ_max) at 425 nm, which means that an iodine gallium lamp (main emission wavelength λ_em = 420 nm), is better than conventional mercury lamp (λ_em = 360 nm), to be used as the irradiation source in the photoimaging process. Compared with the mercury lamp, iodine gallium lamp is cheaper and greener. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Transferrin-Decorated Niosomes with Integrated InP/ZnS Quantum Dots and Magnetic Iron Oxide Nanoparticles: Dual Targeting and Imaging of Glioma

The development of multifunctional nanoscale systems that can mediate efficient tumor targeting, together with high cellular internalization, is crucial for the diagnosis of glioma. The combination of imaging agents into one platform provides dual imaging and allows further surface modification with targeting ligands for specific glioma detection. Herein, transferrin (Tf)-decorated niosomes with integrated magnetic iron oxide nanoparticles (MIONs) and quantum dots (QDs) were formulated (PEGNIO/QDs/MIONs/Tf) for efficient imaging of glioma, supported by magnetic and active targeting. Transmission electron microscopy confirmed the complete co-encapsulation of MIONs and QDs in the niosomes. Flow cytometry analysis demonstrated enhanced cellular uptake of the niosomal formulation by glioma cells. In vitro imaging studies showed that PEGNIO/QDs/MIONs/Tf produces an obvious negative-contrast enhancement effect on glioma cells by magnetic resonance imaging (MRI) and also improved fluorescence intensity under fluorescence microscopy. This novel platform represents the first niosome-based system which combines magnetic nanoparticles and QDs, and has application potential in dual-targeted imaging of glioma.     

Macromolecular sorbent materials for urea capture

Three types of chitosan–glutaraldehyde (Chi–Glu) crosslinked copolymer materials were prepared at various Chi–Glu weight ratios (i.e., 1 : 0.0835, 1 : 0.334, and 1 : 0.585) and variable reaction times. The corresponding Chi–Glu copolymer materials were imbibed in CuSO₄ solution to yield impregnated materials in the form of copolymer/Cu(II) complexes. The copolymer materials were characterized using FTIR spectroscopy and thermogravimetry analysis. Urea sorption isotherms were obtained in aqueous solution at 295 K and pH 7 with pristine chitosan, Chi–Glu copolymers (i.e., 1 : 0.0835 and 1 : 0.585), and the corresponding Chi–Glu/Cu(II) complexes. The concentration of unbound urea was monitored indirectly using a colorimetric method with p‐dimethylaminobenzaldehyde. The equilibrium adsorption data were analyzed using the Sips isotherm model. The uptake of urea with pristine chitosan was 4.7% w/w, whereas Chi–Glu copolymers display increased sorption (Q_m = 10.6–17.1% w/w) with increasing glutaraldehyde content. Urea sorption is further enhanced (Q_m = 16.3–26.4% w/w) for copolymer Chi–Glu/Cu(II) complexes. The preparation of Chi–Glu copolymers at various conditions illustrates that the sorption capacity and molecular recognition of urea can be systematically tuned via crosslinking and the formation of copolymer/Cu(II) complexes, and these results are related to a previously reported study (Shimizu and Fujishige, J. Biomed. Mater. Res. 1983, 17, 597). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Biodegradable vesicular nanocarriers based on poly(?-caprolactone)-block-poly(ethyl ethylene phosphate) for drug delivery

Biodegradable polymer vesicle for drug delivery is reported. Poly(?-caprolactone)-block-poly(ethyl ethylene phosphate) with well-defined structure (PCL₁₅₀-b-PEEP₃₀) has been prepared by ring-opening polymerization. It forms vesicles in aqueous solution using the thin-film hydration method and further exclusion of the as-formed vesicles results in vesicles at nano-size, demonstrated by confocal laser scanning microscope (CLSM) and transmission electron microscopy observations. Doxorubicin (DOX) has been loaded into the vesicles with a loading content of 4.38% using an acid gradient method. The release of DOX from the vesicles is accelerated in the presence of an enzyme phosphodiesterase I that is known to catalyze the degradation of polyphosphoester, achieving 83.8% release of total loaded DOX in 140 h. The DOX-loaded vesicles can be successfully internalized by A549 cells, and it results in enhanced inhibition to A549 cell proliferation, likely owning to the sustained intracellular release of DOX as observed by CLSM. With these properties, the vesicles based on the block copolymer of PCL and PEEP are attractive as drug carriers for pharmaceutical application.     

In vitro and in vivo antitumor study of folic acid-conjugated carboxymethyl chitosan and phenylboronic acid–based nanoparticles

Folic acid-modified carboxymethyl chitosan was polymerized with N-3-acrylamidophenylboronic acid monomer to prepare tumor-targeting nanoparticles (NPs). Nanoparticles’ size was characterized by dynamic light scattering, while the micromorphology was observed through transmission electron microscopy (TEM) and scanning electronic microscope (SEM). Doxorubicin was then loaded into prepared nanoparticles. The cellular uptake of these NPs was investigated in monolayer cell model and multicellular spheroids. The results revealed that FA-modified nanoparticles possess excellent ability of accumulation and penetration in 2D and 3D cell models. It was also found that these nanoparticles enhanced drug accumulation in tumor, which finally increased antitumor efficiency in H22 tumor-bearing mice.     

Synthesis and characterization of an amphiphilic graft polymer and its potential as a pH-sensitive drug carrier

The synthesis and properties of a new pH-sensitive polymer Poly(?-caprolactone) Grafted Poly(ethylene glycol) Based Poly(ß-amino ester) (PEGAE-g-PCL) are described here. The successful synthesis of the graft copolymer was confirmed by ¹H NMR. The self-assemble behavior of the amphiphilic polymer was investigated using pyrene as a probe. Dynamic light scattering (DLS) showed that the polymeric micelles had a size of 60 nm at physiological pH and were responsive to pH. A spherical morphology was observed for the micelles using transmission electron microscopy (TEM). Zeta-potential measurement at different pH showed that the micelles were neutral at pH 7.4 and positively charged at lower pH. Doxorubicin (DOX) was used as a model drug and loaded in the micelles. The drug loaded micelles showed a slow and pH-dependant drug release behavior. The remaining hydroxyl groups on the main chain made it possible the further conjugation of imaging agents or targeting groups.     

TAT‐modified mixed micelles as biodegradable targeting and delivering system for cancer therapeutics

A mixed micellar system of novel function was designed and synthesized by co‐assembling TAT (cell penetrating peptide)‐modified poly (ethylene glycol)‐poly(l ‐lactide) (PEG‐PLA) copolymer with the drug‐conjugated poly(ethylene glycol)‐b‐poly(l‐ lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate) (mPEG‐b‐P(LA‐co‐MCC)) copolymer. UV‐Vis, Matrix‐assisted laser desorption/ionization time‐of‐flight, and XPS were used to ensure the successful modification of the copolymers with TAT and anti‐tumor drugs. The size of spherical nanomicelles increased from 50 to 60 nm as of empty polymeric micelles to 100–150 nm as of drug‐loaded ones, determined by dynamic light scattering and TEM. Daunorubicin was selected as model drug for in vitro evaluations on different cell lines. 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay clearly indicated an improved cell growth inhibition of the TAT‐modified mixed micelles. While green fluorescent protein was used as a marker for the mixed micelle, small amount of DMSO was necessary to enhance the accumulation of the mixed micelles in cell lines Caski. Mediated by TAT, mixed micelles containing Apoptin (a tumor‐specific apoptosis drug) showed higher level of tumor cell internalization and growth inhibition than that of mixed micelles without TAT modification. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4598–4607, 2013     

Enhanced loading of doxorubicin into polymeric micelles by a combination of ionic bonding and hydrophobic effect,and the pH-sensitive and ligand-mediated delivery of loaded drug

Folate-conjugated micelles were fabricated from amphiphilic diblock copolymers with poly(ethylene glycol) as the hydrophilic block and a random copolymer of n-butyl methacrylate and methacrylic acid as the hydrophobic block. Doxorubicin (DOX), a model drug that contains an amine group and hydrophobic moiety, was loaded with a high loading capacity into micelles by a combination of ionic bonding and hydrophobic effect. The combined interactions imparted a pH-sensitive delivery property to the system. The release rate of loaded DOX was slow at pH 7.4 (i.e., mimicking the plasma environment) but increased significantly at acidic pH (i.e., mimicking endosome/lysosome conditions). Acid-triggered drug release resulted from the carboxylate protonation of poly(methacrylic acid), which dissociated the ionic bonding between the micelles and DOX. Cellular uptake by folate receptor-overexpressing HeLa cells of the DOX-loaded folate-conjugated micelles was higher than that of micelles without folate conjugation. Thus, the DOX-loaded folate-conjugated micelles displayed higher cytotoxicity to HeLa cells.