Mechanical,Structural and Thermal Properties of Transparent Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–TeO<Subscript>2</Subscript> Glass System

Oxide based optical glass materials has important potential material in many applications from fiber optic to sensor due to the high transparency and amourphous structures. The objective of this study is to synthesize the novel optical glass materials based on the bismuth and aluminum contents to be able to determine the physical, chemical and mechanical properties by considering the systematic experimental steps. In this study, Bi₂O₃–Al₂O₃ based tellurite optical glasses have been prepared by using conventional melt quenching method as a function of the both Bi₂O₃ and Al₂O₃ compositions. There is a strong interactions between the glass former and modifier ions that might effect on the structure and mechanical properties. During the experimental steps, thermal, structural and mechanical properties of the prepared glass materials have been determined considering the DTA/DSC, FT-IR spectroscopy, SEM and Vicker’s hardness techniques, respectively. Thermal parameters, like glass transition, T_g, onset, T_x, crystallization, T_p, and melting, T_m, temperatures were obtained by using DTA scan.     

Comparative Study of Powders Based on the ZrO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–СeO<Subscript>2</Subscript> System Obtained by Various Liquid Phase Methods of Synthesis

Using the liquid-phase methods of synthesis—the coprecipitation of hydroxides and the hydrothermal method—mesoporous xerogels are obtained based on the ZrО₂–Y₂О₃–CeО₂ system with 5–8-nm particles and powders (after the heat treatment of xerogels at 600°C) with a coherent scattering region (CSR) size of 9 to 10 nm and S_sp = 96–156 m²/g. After calcination at 1400°C, the powders are transformed into tetragonal solid solutions with a CSR size of 65 nm in the synthesis by the coprecipitation method, and they are transformed into solid solutions with a CSR size of 84 nm with a high degree of tetragonality of c/a = 1.438–1.431 in the synthesis by the hydrothermal method.     

Synthesis of the study of solid solutions based on the ZrO<Subscript>2</Subscript>–HfO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript>(CeO<Subscript>2</Subscript>) system

The results of the studies of the conditions of the liquid-phase synthesis of highly dispersed xerogels with a low degree of agglomeration and precursor nanopowders (~10–12 nm) based on zirconium dioxide in the ZrO₂–HfO₂–Y₂O₃(CeO₂) system are presented. The thermal decomposition of xerogels and formation of crystalline solid solutions with the structure of fluorite are investigated. The optimal conditions for the solidification of nanodispersed powders for fabricating compact ceramics based on solid solutions of ZrO₂ and the physical–chemical properties of these ceramics are studied.     

Vitreous region and properties of glasses of the Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>–GeS<Subscript>2</Subscript>–PbF<Subscript>2</Subscript> system

Vitrification in the Ga₂S₃–GeS₂–PbF₂ system is considered. The physicochemical properties of glasses, such as density, microhardness, electroconductivity, refraction index, and transmission percentage of specimens in visible and IR ranges of spectrum are studied; differential thermal analysis is carried out; and Raman and electron paramagnetic resonance spectra are investigated.     

Physicochemical Properties of Nanosized Powders of the LaPO<Subscript>4</Subscript>–DyPO<Subscript>4</Subscript>–H<Subscript>2</Subscript>O System

Nanosized La_1–xDy_xPO₄ · nH₂O powders are synthesized by the sol-gel method using direct and reverse precipitation. The formation of a continuous series of hexagonal solid solutions based on LaPO₄ · nH₂O is confirmed by the XRD and DSC/TG methods. A continuous series of monoclinic solid solutions based on LaPO4 is formed at temperatures higher than 600°C. A reflex corresponding to a tetragonal form of DyPO₄ is formed during the calcination of DyPO₄ powder at 850°C. Two types of solid solutions are observed at temperatures of 1000–1200°C, namely, monoclinic solutions based on LaPO₄ (to x ≈ 0.7) and tetragonal solutions based on DyPO₄ (0.90 ≤ x ≤ 1.0). The results are compared depending on the methods of nanopowder synthesis.     

Monte Carlo Design and Experiments on the Neutron Shielding Performances of B<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass System

Neutron shielding properties of (90 – x)B₂O₃–10ZnO–xBi₂O₃ glass systems (where x = 15, 20, 25 and 30 mol %) were investigated by Monte Carlo simulations (FLUKA and GEANT4) and experiments. Neutron mass removal cross sections, number of inelastic scattering, elastic scattering, and capture interactions were estimated by simulations. ²⁴¹Am/Be neutron source was used for the neutron equivalent dose rate measurements. As a result, produced glass samples have fine neutron shielding capacity.     

Migration processes in the glass forming melts of the Na<Subscript>2</Subscript>O–BaO–Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The specific conductivity and tracer of diffusion of sodium and barium ions have been determined and the values of the transport numbers and correlation factor for diffusion have been calculated in two melts of the Na₂O–BaO–Ga₂O₃–SiO₂ system.     

Effect of the relative volume of the conducting phase on the electroconductivity of glasses in the Na<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effect of the relative volume of the conducting phase on the electroconductivity of phase-separated glasses in the ternary system Na₂O–B₂O₃–SiO₂, whose compositions are on the same glass transition isotherm at 550°C, is investigated. It is demonstrated that the electroconductivity of phase-separated sodium borosilicate glasses does not depend on the relative volume of the conducting phase (within the limits from 0.3 to 0.9) under the condition that its composition invariable.     

Structural heterogeneity of SiO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>O–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> glass

It is shown that the phase heterogeneity of SiO₂–Na₂O–Al₂O₃ glass has a liquation and crystallization nature, the balance between which is determined by the conditions of their synthesis. An increase in the aluminum oxide content decreases the number of liquation and crystallization sites, and also the linear sizes of the crystalline formations without eliminating the phase separation due to the liquation. The area of metastable immiscibility in the SiO₂–Na₂O–Al₂O₃ system, which is determined by scanning electron microscopy, is probably wider than the area detected by the optical methods.     

Synthesis of low-melting eutectic of the CaO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system in a solid phase

Results are provided for a physicochemical study of processes that occur during synthesis of eutectic composition of the CaO–B₂O₃–SiO₂ system in a solid phase, and the possibility of their activation by using starting calcium-containing components with different chemical and thermal prehistory. It is established that independent of the form of starting components, in all cases there is formation of a crystalline eutectic phase, and the sequence of physicochemical processes that occur is determined by the reaction capacity of the calcium compound introduced.     

Enhancement of the Activities of γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Methane-SCR of NO by Treatment with NH<Subscript>3</Subscript>

Abstract  

The precursor particles for γ-Ga₂O₃–Al₂O₃ solid solutions were prepared by the coprecipitation method from aqueous solutions of Ga(NO₃)₃ and Al(NO₃)₃ with (NH₄)₂CO₃ as a precipitant. The γ-Ga₂O₃–Al₂O₃ solid solutions were obtained by calcination of the precursor at 700 °C. In this paper, the performance of the catalysts treated with NH₃ was investigated for the selective catalytic reduction (SCR) of NO with methane as a reducing agent, and it was found that γ-Ga₂O₃–Al₂O₃ catalysts treated with NH₃ and subsequently annealed in air showed higher activities than the γ-Ga₂O₃–Al₂O₃ catalysts without NH₃ treatment. NH₃ treatment of the catalyst caused partial rearrangement of Ga³⁺ and Al³⁺ ions and increased the population of tetrahedral Ga³⁺ ions in the defective spinel structure.     

Kinetics of Hydrolytic Polycondensation of Silicon Dioxide in the SrO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> Systems

The kinetics of polycondensation in solutions during the liquid-phase synthesis of ceramic material precursors based on a SrO–B₂O₃–SiO₂ system are studied by spectrophotometry. The ratio between the quantitative content of tetraethoxysilane and the reaction rate of the formation of polymer forms is proved.     

Effects of the geometry and operating temperature on the stability of Ti/IrO<Subscript>2</Subscript>–SnO<Subscript>2</Subscript>–Sb<Subscript>2</Subscript>O<Subscript>5</Subscript> electrodes for O<Subscript>2</Subscript> evolution

Ternary IrO₂–Sb₂O₅–SnO₂ anode has shown its superiorities over IrO₂ and many other electrocatalysts for O₂ evolution, in terms of electrochemical stability, activity and cost. The performance of IrO₂–Sb₂O₅–SnO₂ anodes is affected by its electrochemical properties and operating conditions. In this paper, the electrochemical stability and activity of the Ti/IrO₂–Sb₂O₅–SnO₂ anodes prepared with three different geometries were investigated under different operating conditions. It was found that anodes with large mean curvature have high electrochemical stability. Although increasing temperature results in a decrease in the stability of Ti/IrO₂–Sb₂O₅–SnO₂, the anode with a mean curvature of 200 m⁻¹ still shows acceptable service life even at 70 °C. This tolerance of high temperature was attributed to the thermal expansion difference between the substrate and the coating layer, the redox window for Ir(V)/Ir(IV) conversion, and the redox reversibility of Sb and Sn species in the coating layer.     

Hydroisomerization of Benzene-Containing Gasoline Fraction on Pt/B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Pt/WO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

The effect of the hydroisomerization conditions of the benzene-containing fraction of catalytic reforming gasoline on the yield and composition of products is studied on Pt/B₂O₃–Al₂O₃ and Pt/WO₃–Al₂O₃ catalysts. These catalysts allow benzene to be completely removed from the raw material. At the same time, the greatest yields of liquid products are obtained with minimal losses of the octane number at 2 MPa, a mass feedstock hourly space velocity (MFHSV) of 2 h^?1, and 325°C: 96.3 and 95.4 wt % on Pt/B₂O₃–Al₂O₃ and Pt/WO₃–Al₂O₃ catalysts, respectively. The activity of the catalysts is maintained for 100 h during their operation.