High-Temperature Structural Phase Transition in Ca0.7Ti0.7La0.3Al0.3O3: Investigation by Synchrotron X-Ray Diffraction

Mixed-oxide prepared Ca_0.7Ti_0.7La_0.3Al_0.3O₃ (CTLA) ceramics (≈96% dense), grain size 6–7 μm, with dielectric properties (at 4 GHz) of ɛ_r≈46, Q × f ≈38 000 GHz, and τ_f+13 ppm/°C, were studied at 25°–1300°C using synchrotron X-ray powder diffraction. At room temperature, CTLA exhibits a distorted orthorhombic structure, with two tilt systems: a =5.40383 (4) Å, b =5.41106 (6) Å, and c =7.64114 (7) Å with space group Pbnm . At 1050°±25°C, there is a transition from orthorhombic ( Pbnm ) to tetragonal ( I 4/ mcm ), with a simpler tilt arrangement. The lattice parameters at 1100°C were: a =5.44285 (4) Å and c =7.68913 (8) Å.     

Determination of Precise Unit-Cell Parameters of the α-Tricalcium Phosphate Ca3(PO4)2 Through High-Resolution Synchrotron Powder Diffraction

Unit-cell parameters of the α-tricalcium phosphate [TCP; Ca₃(PO₄)₂] were investigated using high-resolution synchrotron powder diffraction and the Rietveld method. The diffraction experiment was conducted at 29°C at the BL-15XU experimental station of SPring-8, Japan. Precise unit-cell parameters of the α-TCP were obtained; a =12.87271 (9), b =27.28034(8), c =15.21275(12) Å, α=γ=90°, and β=126.2078(4)°. The calculated density of α-TCP (2.8677 g/cm³) is smaller than that of β-TCP, indicating the "looser" structure of α-TCP.     

A New Low-Loss Microwave Dielectric Ceramic Sr4LaTiNb3O15

A high dielectric constant and low-loss ceramic with composition Sr₄LaTiNb₃O₁₅ has been prepared by the conventional solid-state ceramic route. This compound adopts an A₅B₄O₁₅ cation-deficient hexagonal perovskite structure and crystallizes in the trigonal system with unit cell parameters a =5.6307(2), c =11.3692(3) Å, V =312.16(2) ų, and Z =1. The dielectric properties of dense ceramics sintered in air at 1460°C have been characterized at microwave frequencies. The results show that the material affords a relatively high dielectric constant ɛ_r∼43, a high quality factor Q × f ∼44 718 GHz, and a low temperature coefficient of resonant frequency TC_f∼13 ppm/°C.     

The Role of Cerium Orthosilicate in the Densification of Si3N4

The existence of compounds between Si₃N₄-CeO₂ and Si₃N₄-Ce₂O₃ was investigated for firing temperatures of 1600° to 1700°C. The two new monoclinic compounds found were Ce₂O₃·2Si₃N₄ with lattice parameters a = 16.288, b = 4.848, and c =7.853 Å and β=91.54° and Ce₄Si₂O₇N₂ with lattice parameters a = 10.360, b = 10.865, and c =3.974 Å and β=90.33°. Cerium orthosilicate (Ce 4.67 (SiO₄)₃O) is present during firing as a glassy intermediate phase which promotes sintering and densification and then reacts with silicon nitride to form cerium silicon oxynitrde (CeSiO₂N).     

Alkoxide Route to La0.5Sr0.5CoO3 Films and Powders

An all-alkoxide route to films and nano-phase powders of the La_0.5Sr_0.5CoO₃ perovskite is described. To our knowledge, this is the first purely alkoxide-based route to (La_{1− x} Sr _x )CoO₃, and it yields phase-pure and elementally homogeneous perovskite at 700°C by heating at 2°C/min. At 700°C, a cubic unit cell was obtained with a _c=3.853Å, and after further heating to 1000°C, a rhombohedral cell could be indexed: a _r=5.417 Å, α_r=59.94°. Ninety to 130 nm thick films of La_0.5Sr_0.5CoO₃ were obtained by spin coating. The gel-to-oxide conversion was studied in some detail, using thermo-gravimetric analysis, differential scanning calorimetry, powder X-ray diffraction, IR spectroscopy, and transmission electron microscope equipped with an energy-dispersive X-ray spectrometer.     

Subsolidus Phase Equilibria of the CaO-B2O3-BaO System

The "subsolidus" phase relations at room temperature in the system CaO-B₂O₃-BaO are investigated. Specimens of various compositions were prepared from appropriate ratios of CaCO₃, B₂O₃, and BaCO₃, and fired from 780° to 1040°C according to their melting points. There are three ternary compounds in this system. The crystal structures of these compounds were determined by X-ray diffraction (XRD). CaBa₂(BO₃)₂ and Ca₅Ba₂B₁₀O₂₂ are monoclinic structures. The lattice constants a = 14.221 Å, b = 4.569 Å, c = 11.926 A, β= 99.947°, and V = 763.4 å³ for CaBa₂(BO₃)₂ and a = 15.714 å, b = 6.184 å, c = 10.204 å, β= 93.954°, and V = 989.29 å₃ for Ca₅Ba₂B₁₀O₂₂ are obtained. The third compound, CaBa₂(B₃O₆)₂, is isostructural with the high form of BaB₂O₄ with lattice constants a = 7.167 å and c = 35.298 å. Powder second harmonic generation efficiencies of these ternary compounds were measured using a homemade apparatus.     

Ba8ZnTa6O24: A New High Q Dielectric Perovskite

The hexagonal perovskite, Ba₈ZnTa₆O₂₄, was prepared in single-phase form and was found to be a stable secondary phase, formed as a result of the loss of ZnO from Ba(Zn_1/3Ta_2/3)O₃ microwave dielectrics. The experimental and calculated X-ray patterns of Ba₈ZnTa₆O₂₄ indicate it is isostructural with Ba₈Ta₆NiO₂₄ with an 8H (cchc)₂ close-packed BaO₃ stacking sequence and the lattice parameters, a =10.0825(14), c =19.0587(38)Å. High-density ceramics of Ba₈ZnTa₆O₂₄ could be prepared at temperatures considerably lower (1400°C) than those used to sinter pure Ba(Zn_1/3Ta_2/3)O₃, and exhibit very good microwave dielectric properties with ɛ=30.5, Q _f=62 300, and τ_f=+36 ppm/°C at 8.9 GHz.     

Phase Diagram of the System KF–AlF3

The system KF–AlF₃ was reinvestigated precisely by differential thermal analysis, X-ray diffractometry, and visual observation. All of the samples for the present investigation were prepared by solution synthesis. The results verified the existence of 2KF·AlF₃ (K₂AlF₅) and KF·4AlF₃ in the phase diagram; both compounds were orthorhombic. The cell parameters of the compounds were, respectively, a = 10.87 ± 0.03 Å, b = 10.36 ± 0.01 Å, c = 7.83 ± 0.03 Å, and a = 7.89 ± 0.01 Å, b = 7.57 ± 0.01 Å, c = 6.94 ± 0.01 Å. KAlF₄ was confirmed to melt congruently at 575°± 2°C by careful examination.     

CrO2-Cr2O3 Phase Boundary Under High O2 Pressures

The phase boundary between CrO₂ and Cr₂O₃ was reinvestigated under high O₂ pressures by using a new type of gas compressor. The boundary curve can be represented as log Po₂= 7.16-(3579/ T ). Using the observed data, Δ G °, Δ H °, and Δ S ° for the reaction 2CrO₂⇋Cr₂O₃+½O₂ were calculated to be: Δ G °= -(1.55/100) T +7.60 kcal/mol, Δ H °= -8.19 kcal/mol, and Δ S °= (-15.8/ T )+0.0155 kcal/mol.     

Synthesis, Rietveld Analysis, and Solid State Nuclear Magnetic Resonance of X2-Sc2SiO5

Compounds containing rare earths are of increasing technological interest especially because of their unique mechanical, magnetic, electrical, and optical properties. Among them, rare earth oxyorthosilicates are attractive scintillators for γ- and X-ray spectroscopy and detection. However, there are many structural aspects of those compounds that are not clear. In this research, the structure parameters for Sc₂Si₂O₅, X₂-polymorph, have been refined from powder X-ray diffraction (XRD) data and the ²⁹Si MAS NMR spectrum is reported for the first time. X₂-Sc₂SiO₅ polymorph was synthesized by the sol–gel method and characterized by XRD and ²⁹Si MAS NMR. The XRD pattern was indexed in a monoclinic unit cell with space group I 2/ c ; the resulting unit cell parameters were a =9.9674(2) Å, b =6.4264(9) Å, c =12.0636(2) Å, and β=103.938(1)°. The ²⁹Si MAS NMR spectrum showed a unique signal at −79.5 ppm, compatible with the unique Si crystallographic site in the unit cell. Finally, the band valence method has been applied to the calculation of a "shift parameter," which is correlated with the NMR chemical shift.     

Phase Relations in the System Bi2O3-WO3

Phase relations in the system Bi₂O₃-WO₃ were studied from 500° to 1100°C. Four intermediate phases, 7Bi₂O₃· WO₃, 7Bi₂O₃· 2WO₃, Bi₂O₃· WO₃, and Bi₂O₃· 2WO₃, were found. The 7B₂O · WO₃ phase is tetragonal with a ₀= 5.52 Å and c ₀= 17.39 Å and transforms to the fcc structure at 784°C; 7Bi₂O₃· 2WO₃ has the fcc structure and forms an extensive range of solid solutions in the system. Both Bi₂O₃· WO₃ and Bi₂O₃· 2WO₃ are orthorhombic with (in Å) a ₀= 5.45, b ₀=5.46, c ₀= 16.42 and a ₀= 5.42, b ₀= 5.41, c ₀= 23.7, respectively. Two eutectic points and one peritectic exist in the system at, respectively, 905°± 3°C and 64 mol% WO₃, 907°± 3°C and 70 mol% WO₃, and 965°± 5°C and 10 mol% WO₃.     

Syntheses and Unit-Cell Determination of Ba3V4O13 and Low-and High-Temperature Ba3P4O13

The syntheses and the results of unit-cell determinations ofBa₃V₄O₁₃ and the two forms (low- and high-temperature) of Ba₃P₄O₁₃ are presented. Ba₃V₄O₁₃ crystallizes in the monoclinic system, space group Cc or C2/c with unit-cell dimensions a=16.087, b=8.948, c=10.159 (x10nm), β=114.52° Low-Ba₃P₄O₁₃ crystallizes in the triclinic system, space group P1 or P1 with unit-cell dimensions a=5.757, b=7.243, c=8.104 (x10 nm) α=82.75°, β=73.94°, γ=70.71°. Low-Ba₃P₄O₁₃ transforms at 870°C into high-Ba₃P₄O₁₃ which crystallizes in the orthorhombic system, space group Pbcm (No. 57) (or Pbc2, No. 29) with unit-cell dimensions a =7.107, b=13.883, c=19.219 (x10 nm). No relations have been found between the structures of the tribarium tetravanadate and the tribarium tetraphosphate.     

Crystal Structure and Dielectric Properties of LaYbO3

The crystal structure and dielectric properties of LaYbO₃ ceramics prepared by the mixed-oxide route have been investigated. Rietveld refinements performed on X-ray and neutron diffraction data show the room-temperature structure to be best described by the orthorhombic Pnma space group [ a =6.02628(9) Å, b =8.39857(11) Å, and c =5.82717(7) Å; Z =4, and theoretical density, D _x =8.1 g/cm³] in agreement with electron diffraction experiments. LaYbO₃ ceramics fired at 1600°C for 4 h attain ∼97% of D _x and their microstructures consist of randomly distributed equiaxed grains with an average size of ∼8 μm. Conventional transmission electron microscopy shows densification to occur in the absence of a liquid phase and reveals domain-free grains. The relative permittivity, ɛ_r, of LaYbO₃ ceramics at radio frequencies is ∼26 in the range ∼10–300 K; however, a small dielectric anomaly is detected at ∼15 K. At room temperature and microwave frequencies, LaYbO₃ ceramics exhibit ɛ_r∼26, Q × f _r∼20 613 GHz (at 7 GHz), and τ_f∼−22 ppm/K. Q × f _r show complex subambient behavior, decreasing from a plateau value of ∼20 000 GHz between ∼300 and 200 K to a second plateau value of ∼6000 GHz at ∼90 K before decreasing to <1000 GHz at ∼10 K. The large decrease in Q × f _r at low temperature may be related to the onset of antiferromagnetism at ∼2.7 K. ¹     

Crystal Structure of Lu4Si2O7N2 Analyzed by the Rietveld Method Using the Time-of-Flight Neutron Powder Diffraction Pattern

The crystal structure of a lutetium silicon oxynitride (Lu₄Si₂O₇N₂) was analyzed by the Rietveld method using time-of-flight (TOF) neutron powder diffraction data. The compound crystallizes in a monoclinic cell, space group P 2₁/ c (No. 14-1) with a = 7.4243(1), b = 10.2728(1), c = 10.6628(1) Å, and β= 109.773(1)° at 297 K. One nitrogen atom in Lu₄Si₂O₇N₂ occupies the bridging site between the two Si atoms, and the other one is statistically situated at the terminal sites of Si₂O₅N₂ ditetrahedra. In the local structure, Si₂O₅N₂ ditetrahedra consist of SiO₃N and SiO₂N₂ tetrahedral units sharing the N atom. Lu atoms are in sixfold, sevenfold (×2) and eightfold coordinations of O/N atoms. X-ray powder diffraction data were also analyzed with the model obtained by the neutron diffraction.     

Crystal Structure of the Microwave Dielectric Resonator Ba2Ti9O20

A single-crystal X-ray study of dibarium nonatitanate, Ba₂Ti₉O₂₀, yielded the triclinic space group P 1 with a =0.7471(1), b= 1.4081(2), c= 1.4344(2) nm, α=89.94(2)°, β= 79.43(2)°, γ= 84.45(2)°, V = 1.476 nm³ Z = 4, and D_x= 4.61 Mg/m³. A refinement of atomic coordinates and isotropic thermal parameters led to a residual of 0.03. The structure consists of hexagonally closest-packed layers of Ba and O atoms in the sequence (hch)₃. All Ti atoms reside in octahedral interstices of this closest packing. The various Ti coordination octahedra share only edges and corners with each other. One-half of the Ba atoms is twelve-coordinated by oxygen atoms, the other half is eleven-coordinated.     

Low-Loss Microwave Dielectric Ceramics Using (Mg1−xMnx)2TiO4 (x=0.02–0.1) Solid Solution

Composite ceramics in a solid solution of (Mg_{1− x} Mn _x )₂TiO₄ ( x =0.02–0.1) have been prepared by the mixed oxide route. Formation of the solid solution was confirmed by the X-ray diffraction, the EDX analysis, and the measured lattice parameters, which varied linearly from Mg₂TiO₄ ( a = b = c =8.4410 Å) to (Mg_0.9 Mn_0.1)₂TiO₄ ( a = b = c =8.4445 Å). The XRD analysis also confirmed the co-existence of a cubic-structured (Mg_{1− x} Mn _x )₂TiO₄ and an ilmenite-structured second phase (Mg_{1− x} Mn _x )TiO₃. The composition expected to have a maximum Q × f (276 200 GHz at 10.5 GHz) is (Mg_0.95Mn_0.05)₂TiO₄ with ɛ_r∼15.69 and τ_f∼−52.6 ppm/°C. The existence of the second phase, however, would lead to no significant variation in the dielectric properties of the specimen because it possesses compatible properties compared with that of the main phase.     

Effect of Bi2O3 Addition on the Sintering Temperature and Microwave Dielectric Properties of Zn2SiO4 Ceramics

Bi₂O₃ was added to a nominal composition of Zn_1.8SiO_3.8 (ZS) ceramics to decrease their sintering temperature. When the Bi₂O₃ content was <8.0 mol%, a porous microstructure with Bi₄(SiO₄)₃ and SiO₂ second phases was developed in the specimen sintered at 885°C. However, when the Bi₂O₃ content exceeded 8.0 mol%, a liquid phase, which formed during sintering at temperatures below 900°C, assisted the densification of the ZS ceramics. Good microwave dielectric properties of Q × f =12,600 GHz, ɛ_r=7.6, and τ_f=−22 ppm/°C were obtained from the specimen with 8.0 mol% Bi₂O₃ sintered at 885°C for 2 h.     

Tailoring the Microwave Dielectric Properties of MgNb2O6 and Mg4Nb2O9 Ceramics

The columbites MgNb₂O₆, MgTa₂O₆, and corundum-type Mg₄Nb₂O₉ ceramics were prepared by the conventional solid-state ceramic route. The structure and microstructure of the sintered samples were investigated by X-ray diffraction and scanning electron microscopic techniques. The microwave dielectric properties of the samples were measured by the resonance method in the frequency range 4–6 GHz. The dielectric properties have been tailored by forming a solid solution between MgNb₂O₆ and MgTa₂O₆ and by the substitution of TiO₂ for Nb₂O₅ in both MgNb₂O₆ and Mg₄Nb₂O₉ ceramics. The Mg(Nb_0.7Ta_1.3)O₆ has ɛ_r=29, Q _u× f =67 800 GHz, and τ_f=0.8 ppm/°C and the MgO–(0.4)Nb₂O₅–(1.5)TiO₂ composition has ɛ_r=34.5, Q _u× f =81 300 GHz, and τ_f=−2 ppm/°C.     

Low-Temperature Synthesis of Nanocrystalline α-Si3N4 Powders by the Reaction of Mg2Si with NH4Cl

Nanocrystalline α-Si₃N₄ powders have been prepared with a yield of 93% by the reaction of Mg₂Si with NH₄Cl in the temperature range of 450° to 600°C in an autoclave. X-ray diffraction patterns of the products can be indexed as the α-Si₃N₄ with the lattice constants a = 7.770 and c = 5.627 Å. X-ray photoelectron spectroscopy analysis indicates that the composition of the α-Si₃N₄ samples has a Si:N ratio of 0.756. Transmission electron microscopy images show that the α-Si₃N₄ crystallites prepared at 450°, 500°, and 550°C are particles of about 20, 40, and 70 nm in average, respectively.     

Microstructures and Microwave Dielectric Characteristics of CaRAlO4 (R = Nd, Sm, Y) Ceramics with Tetragonal K2NiF4 Structure

CaRAlO₄ (R = Nd, Sm, Y) ceramics with a K₂NiF₄ structure were prepared by a solid-state reaction approach, and their microwave dielectric characteristics were evaluated, along with their microstructures. Dense CaNdAlO₄, CaSmAlO₄, and CaYAlO₄ ceramics were obtained by sintering at 1425°–1500°C in air for 3 h, and good microwave dielectric characteristics were achieved: (1) ɛ= 18.2, Qf = 17 980 GHz, τ_f=−52 ppm/°C for CaNdAlO₄; (2) ɛ= 18.2, Qf = 51 060 GHz, τ_f=−3 ppm/°C for CaSmAlO₄; and (3) ɛ= 18.9, Qf = 39 960 GHz, τ_f= 6 ppm/°C for CaYAlO₄.