The influence of finite conductor thickness and conductivity onfundamental and higher-order modes in miniature hybrid MIC's (MHMIC's)and MMIC's

The effect of finite metallization thickness and finite conductivity on the propagation characteristics of conductor-backed CPW on thin substrate is rigorously analyzed. A self-consistent approach is used together with the method of lines (MoL) to determine the propagation constant, losses and field distribution of the fundamental and first two higher-order modes in coplanar waveguides (CPWs) with finite metallization thickness and lossy backmetallization. The method used is general and can be applied to miniature MHMICs and MMICs including lossy semiconductor substrate. It is shown that the onset of higher-order modes limits the usable frequency range of conductor-backed CPWs. The analysis also includes microstrip transmission lines on thin substrate material. It is demonstrated that a resistive strip embedded into the microstrip ground plane may potentially be useful in the design of integrated planar attenuators     

Electromagnetic coupling of coplanar waveguides and microstriplines to highly lossy dielectric media

The spectral-domain technique is utilized to analyze the coupling characteristics of coplanar waveguides and microstrip lines coupled with multilayer lossy dielectric media. Numerical results illustrating the dispersion characteristics of coplanar and microstrip lines, as well as the various electric field components coupled to highly lossy dielectric media, are presented. It is shown that the presence of a superstrate of lossless dielectric between the coplanar waveguide and the lossy medium plays a key role in setting up an axial electric field component that facilitates leaky-wave-type coupling to the lossy medium. The thickness of the superstrate relative to the gap width in the coplanar waveguide is important in controlling the magnitude of this axial electric field component. The coupling characteristics of the microstrip and coplanar lines are compared, and results generally show improved coupling if coplanar waveguides are utilized. Values of the attenuation constant α are higher for coplanar waveguide than for microstrip line, and for both structures α decreases with frequency     

新型混联输送机构的机电耦合动力学模型研究

针对一种新型混联式汽车电泳涂装输送机构,基于机构结构特点,采用解析法对其进行运动学逆解分析,在此基础上,采用Lagrange方法首先建立机构的笛卡尔空间动力学模型。然后,利用矢量控制技术,建立交流永磁同步伺服电机的动力学模型。根据力矩匹配的原则,联立机构和交流伺服电机的动力学模型,得到整个系统的机电耦合动力学模型。最后利用MATLAB软件对所建立动力学模型进行仿真分析,并同时利用ADAMS建模进行对比验证得到主动关节驱动力和驱动力矩变化曲线,验证了所建立动力学模型的可靠性及考虑机电耦合的必要性,为进一步实现该电泳涂装输送机构的高性能控制及实际工程应用奠定了基础。     

A new self-align technology for GaAs analog MMIC's

A new self-align technology suitable for fabrication of GaAs low-noise FET's and MMIC's is demonstrated. The present technology, which is based upon sidewall technology and pattern inversion technology, provides a negligible short-channel effect, a low-parasitic resistance and a well-controlled breakdown voltage, all of which are essentially required for high microwave performance. An experimental 0.5-µm gate FET fabricated using the new process exhibits a high transconductance such as 220 mS/mm and a low-noise figure such as 1.6 dB at 12 GHz.     

A Proposal of a New Dielectric Resonator Construction for MIC's

A compact and high-temperature-stable dielectric resonator having no shielding metal walls nor a conventional frequency tuning screw is described. This resonator consists of a high epsilon/sub r/ dielectric resonator element mounted on a low-loss dielectric mount, a dielectric disk with thin metal film fixed on the resonator element, and a microstrip line substrate on which to mount the constituents. The resonant frequency tuning is made by trimming the metal film on the disk. The TE/sub 01delta/ -mode resonant frequencies are analyzed through dielectric waveguide model application. Less than 1-percent analytical error is presented in comparison with the experimental data for a practical resonator. The frequency tuning limit by metal film trimming is about 7 percent. The unfoaded Q value of 2700 at 8.8 GHz and a 4.4-ppm/deg frequency temperature coefficient are obtained.     

A novel method of language modeling for automatic captioning in TC video teleconferencing.

We are developing an automatic captioning system for teleconsultation video teleconferencing (TC-VTC) in telemedicine, based on large vocabulary conversational speech recognition. In TC-VTC, doctors' speech contains a large number of infrequently used medical terms in spontaneous styles. Due to insufficiency of data, we adopted mixture language modeling, with models trained from several datasets of medical and nonmedical domains. This paper proposes novel modeling and estimation methods for the mixture language model (LM). Component LMs are trained from individual datasets, with class n-gram LMs trained from in-domain datasets and word n-gram LMs trained from out-of-domain datasets, and they are interpolated into a mixture LM. For class LMs, semantic categories are used for class definition on medical terms, names, and digits. The interpolation weights of a mixture LM are estimated by a greedy algorithm of forward weight adjustment (FWA). The proposed mixing of in-domain class LMs and out-of-domain word LMs, the semantic definitions of word classes, as well as the weight-estimation algorithm of FWA are effective on the TC-VTC task. As compared with using mixtures of word LMs with weights estimated by the conventional expectation-maximization algorithm, the proposed methods led to a 21% reduction of perplexity on test sets of five doctors, which translated into improvements of captioning accuracy.     

A new digital phase shifter architecture suitable for MMIC's

A new architecture is proposed for digital phase shifters that is suitable for monolithic integration (MMIC's). It consists of an arrangement of a standard building block which is a vector summer and limiter repeated many times over the circuit. Examples of phase shifters up to 6 b are given. Other arrangements of these blocks are mentioned, which give rise to new possibilities     

Dielectric ring-gap resonator for application in MMIC's

A dielectric resonator, the dielectric ring-gap resonator, is introduced and analyzed. The dielectric ring-gap resonator is obtained by sawing a narrow gap into a dielectric resonator. Resonant frequencies and unloaded Q-factors of quasi-TE_0pq mode in the ring-gap resonator have been calculated by an appropriate equivalent circuit starting from the resonant frequencies and the field distributions of the TE_0pq modes in the ring resonator. The calculated resonant frequencies of the fundamental quasi-TE₀₁₁ mode show an accuracy of <1% compared with the experimental results. Coupling techniques to couple the ring-gap resonator to a microstrip line on a thin substrate, using the electric fringing field near the gap, have been experimentally investigated. A rigorous method for determining resonant frequencies and field distributions of TE modes in a multicomposite multilayered cylindrical resonator is presented. This resonator consists of numbers of cylinders that are arbitrarily layered in the axial direction     

Reduced-size branch-line and rat-race hybrids for uniplanar MMIC's

A method of miniaturizing branch-line 90° hybrids and 180° rat-race hybrids is proposed. The method utilizes combinations of short high-impedance transmission lines and shunt lumped capacitors. The hybrids were fabricated on GaAs substrates and the validity and effectiveness of the method were confirmed through experiments at 25 GHz and 11 GHz. The fabricated hybrids demonstrate excellent design accuracy at high frequencies, with a circuit size that is more than 80% smaller than that of conventional hybrids. These hybrids are particularly suitable for uniplanar MMICs where necessary shunt connections are easily made     

Open and short circuits in coplanar MMIC's

Coplanar MMIC stub configurations are investigated by means of the finite-difference method in the frequency domain. The open end, the short end, and a capacitively loaded short end (MIM-short) are analyzed. Their parasitic effects are described in terms of the effective length extension l_ext. The influence of the different line parameters is discussed and simple design rules are given     

New approach for equalising phase velocities in coupled microstriplines

A new method for correcting the difference between the phase velocities of even and odd modes in coupled microstrip lines is suggested. The method is based on use of a biisotropic substrate with an appropriate value of the parameter ξ²/εμ     

A novel bidirectional optical coupling module for subscribers

To overcome drawbacks and limitations of planar lightwave circuit based modules for bidirectional communications, such as the demand for several chips and in consequence more packaging efforts, we have recently developed a novel optical coupling technique using our unique 155 Mbps bidirectional laser chip. Since the chip is structured with a pin-photodiode monolithically integrated on a laser diode's waveguide, the optical coupling requires only the alignment of the chip with a fiber. To optically couple the laser diode and photodiode simultaneously with a single fiber, we have designed an unusual coupling structure using a fiber having a cleaved surface whose normal is 35/spl deg/ angled to the fiber core axis, and using an index-controlling medium with a refractive index of /spl sim/1.3. The bidirectional chip is flip-chip bonded and the fiber is passively aligned using a V-groove on the same substrate of 2.5/spl times/1.3 mm/sup 2/ in size. Even with this extremely small and simple scheme for bidirectional optical coupling, we could obtain an optical output power of -7/spl sim/-10 dBm and a responsivity of <-30 dBm, which are satisfactory to the STM-1 level telecommunications specifications.     

A method for modeling noise in medical images

We have developed a method to study the statistical properties of the noise found in various medical images. The method is specifically designed for types of noise with uncorrelated fluctuations. Such signal fluctuations generally originate in the physical processes of imaging rather than in the tissue textures. Various types of noise (e.g., photon, electronics, and quantization) often contribute to degrade medical images; the overall noise is generally assumed to be additive with a zero-mean, constant-variance Gaussian distribution. However, statistical analysis suggests that the noise variance could be better modeled by a nonlinear function of the image intensity depending on external parameters related to the image acquisition protocol. We present a method to extract the relationship between an image intensity and the noise variance and to evaluate the corresponding parameters. The method was applied successfully to magnetic resonance images with different acquisition sequences and to several types of X-ray images.     

A small signal coupling model for predicting the coupling between LNAs

A small signal coupling model is developed to analyze the coupling between two LNAs. The mutual inductance between the adjacent on-chip inductors is considered responsible for this coupling. A set of formulas have been derived to quantitatively predict the coupling effects. Based on our analysis, a quick estimation can be made to see which pair of inductors plays a key role in evaluating the coupling between the LNAs. Source inductors of two LNAs are placed closely while the load inductors are far apart according to the analysis. To validate the proposed theory, two 2 GHz LNAs are fabricated. The LNAs have a peak gain of 18 dB and NF of 1.4 dB. The coupling between the LNAs is -30 dB.     

A direct method to compute the coupling between nonidentical microwave cavities

A new technique to compute the coupling, as a function of frequency, between nonidentical resonators is presented in this paper. The structure is separated by introducing electric and magnetic wall boundary conditions on the plane of separation, and coupling coefficient is computed directly from the eigenvalues of the four individual structures. The proposed technique has been used to compute the coupling between coaxial combline resonators. It is found to be computationally much faster than the iterative technique. The computed results are in good agreement with the measured results.     

A multicomposite, multilayered cylindrical dielectric resonator forapplication in MMIC's

A method, based on the mode matching technique, to study various resonant modes of a multicomposite, multilayered cylindrical dielectric resonator is presented. Dielectric sphere and cone resonators placed in practical environments are investigated. The calculated resonant frequencies show very good agreement compared with the numerical results of the finite difference method for the spherical resonator and with the measured values for the conical resonator, respectively. Experimental investigations show that the conical resonator can be coupled to a circular microstrip line, which has small size at high frequencies and may be integrated together with an oscillator     

耦合微带线设计的一种实用方法

本文根据耦合微带线的某些特性,提出了耦合微带线设计的一种实用方法.     

A hybrid modeling method for mechanical systems

In this paper, a system identification method for hybrid systems switched by the magnitude of velocity and displacement is proposed. First, it is shown that the regression vector space of a mechanical system switched by the magnitude of velocity cannot be separated by a hyperplane. Then a method based on support vector machines with a polynomial kernel is proposed. The effectiveness of the proposed method is shown by simulations and experiments.     

A simple method for modeling VLSI yields

Data show that simplistic models of yield as a function of chip area are not realistic. Yield of ROS ($\text{R}$ead $\text{O}$nly $\text{S}$tore) chips as a function of the number of bits results, however, in a smooth relationship. This observation appeared to hold for three manufacturing lines. The authors therefore propose that yields should be modeled by the number of circuits rather than by chip area.     

A novel method for detection of the transition between atrial fibrillation and sinus rhythm

Automatic detection of atrial fibrillation (AF) for AF diagnosis, especially for AF monitoring, is necessarily desirable for clinical therapy. In this study, we proposed a novel method for detection of the transition between AF and sinus rhythm based on RR intervals. First, we obtained the delta RR interval distribution difference curve from the density histogram of delta RR intervals, and then detected its peaks, which represented the AF events. Once an AF event was detected, four successive steps were used to classify its type, and thus, determine the boundary of AF: 1) histogram analysis; 2) standard deviation analysis; 3) numbering aberrant rhythms recognition; and 4) Kolmogorov-Smirnov (K-S) test. A dataset of 24-h Holter ECG recordings (n = 433) and two MIT-BIH databases (MIT-BIH AF database and MIT-BIH normal sinus rhythm (NSR) database) were used for development and evaluation. Using the receiver operating characteristic curves for determining the threshold of the K-S test, we have achieved the highest performance of sensitivity and specificity (SP) (96.1% and 98.1%, respectively) for the MIT-BIH AF database, compared with other previously published algorithms. The SP was 97.9% for the MIT-BIH NSR database.