基于RFID技术的四旋翼无人机轨迹跟踪控制系统设计

为促进四旋翼无人机的飞行自主性,增强无人监管情况下飞行器主机所具备的避障行进能力,设计基于RFID技术的四旋翼无人机轨迹跟踪控制系统;采用RFID标签识别技术,调制处理既定控制信号,利用标签识别协议,连接微型四旋翼轨迹控制器与内环姿态控制器,通过数据通信链路,提取轨迹跟踪控制所需的传输电子量,完成轨迹跟踪控制系统硬件设计;利用动力系统中的参数辨识策略,确定与轨迹姿态控制相关的物理规律标注,实现四旋翼无人机轨迹跟踪控制;实验结果表明,与机器视觉型控制系统相比,基于RFID技术的控制系统的SSI避障行进指标数值相对较高,全局最大值达到了 79％,四旋翼无人机滚转角平均值为85°,能够有效抑制四旋翼无人机滚转角的数值上升趋势,增强无人监管情况下飞行器主机避障行进能力.     

Image Based and Hybrid Visual Servo Control of an Unmanned Aerial Vehicle

The use of unmanned aerial vehicles (UAVs) for military, scientific, and civilian sectors are increasing drastically in recent years. This study presents algorithms for the visual-servo control of an UAV, in which a quadrotor helicopter has been stabilized with visual information through the control loop. Unlike previous study that use pose estimation approach which is time consuming and subject to various errors, the visual-servo control is more reliable and fast. The method requires a camera on-board the vehicle, which is already available on various UAV systems. The UAV with a camera behaves like an eye-in-hand visual servoing system. In this study the controller was designed by using two different approaches; image based visual servo control method and hybrid visual servo control method. Various simulations are developed on Matlab, in which the quadrotor aerial vehicle has been visual-servo controlled. In order to show the effectiveness of the algorithms, experiments were performed on a model quadrotor UAV, which suggest successful performance.     

四旋翼无人机飞行过程孪生仿真研究

为了满足无人机在实际飞行过程中的虚实交互、实时响应和精确控制等要求,以四旋翼无人机的飞行过程作为任务需求,提出基于数字孪生技术的四旋翼无人机飞行过程仿真研究。搭建了四旋翼无人机飞行数字孪生系统架构,分析了数字孪生体仿真数据的流向及其作用,并对四旋翼无人机飞行数字孪生系统的功能和意义进行了介绍。从几何、物理、行为和规则等四个方面融合构建了四旋翼无人机的数字孪生体模型。最后进行了四旋翼无人机巡航过程的案例研究,通过仿真案例中的各项参数分析,考察了虚实无人机之间的交互性,证明了数字孪生体模型的精确性,验证了四旋翼无人机飞行数字孪生系统的可行性。     

四旋翼无人机可视化轨迹跟踪仿真系统

为了便于对四旋翼无人机控制算法进行实验仿真和验证,联合Solidworks和Matlab/SimMechanics工具箱设计了一种四旋翼无人机可视化轨迹跟踪仿真系统;利用Solidworks搭建了四旋翼无人机三维实体模型,并通过Solidworks和Matlab转换接口将该实体模型导入到Matlab/SimMechanics中;Matlab/SimMechanics提供了了三维可视化窗口,可以显示无人机的实时仿真状态;仿真平台在Matlab/SimMechanics环境中实现,与Matlab/Simulink通信方便,可方便的将Simulink设计好的控制算法添加到仿真系统中,以进行验证和参数整定,还具有姿态分析和数据分析等功能;轨迹跟踪仿真结果表明,四旋翼无人机可视化轨迹跟踪仿真系统直观可视,准确可靠,能较好地对控制算法进行研究和测试,对四旋翼无人机以及控制算法的研究和开发具有重要价值。     

平面四旋翼无人飞行器运送系统的轨迹规划与跟踪控制器设计

对于四旋翼无人飞行器运送系统而言,需要保证飞行过程中负载的摆幅维持在适当的范围内,并且在飞行器到达目的地后负载无残余摆动.本文针对四旋翼无人飞行器运送系统,提出了一种新颖的轨迹规划与跟踪控制方法.论文首先得到了平面四旋翼无人飞行器的运动特性与负载摆角之间的非线性耦合关系.通过相平面内的几何分析,分别设计了两个轴方向上的分段式加速度轨迹.这种轨迹具有简洁的解析表达式并可获得较高的运送效率,同时满足飞行器的速度,加速度等物理约束.为了使四旋翼无人飞行器准确跟踪规划好的轨迹,本文基于反步法设计了一种非线性跟踪控制器,并通过李雅普诺夫方法对其闭环稳定性进行分析,证明其能使跟踪误差指数收敛于零.论文最后通过仿真结果验证了本文所提出方法的可行性与有效性,及其对外界干扰的鲁棒性.     

基于加速度补偿的无人机吊挂飞行抗摆控制

为了抑制四旋翼无人机(UAV)吊挂飞行中的载荷摆动,研究了一种新的基于加速度补偿的抗摆控制方法.首先,基于拉格朗日法建立了四旋翼UAV吊挂系统的非线性动态特性方程,并构建了能量函数来设计飞行控制系统,使四旋翼UAV跟踪参考轨迹;然后,利用吊挂载荷运动轨迹广义误差设计抗摆控制器,对四旋翼UAV进行加速度补偿以修正UAV的...     

输入饱和与姿态受限的四旋翼无人机反步姿态控制

本文针对四旋翼无人机研究了鲁棒反步姿态控制策略.由于四旋翼无人机结构复杂,其非线性数学模型难以精确建立,因此在控制器设计过程中需要综合考虑模型不确定性、未知外部干扰、输入饱和以及姿态受限等因素.针对模型中的不确定项,使用神经网络进行逼近;对于外部未知干扰,使用非线性干扰观测器进行补偿;使用双曲正切函数逼近饱和函数,解决输入饱和问题;同时使用界限Lyapunov函数设计控制器,确保姿态满足限制条件.最后,设计四旋翼无人机反步姿态控制器,并根据Lyapunov稳定性定理证明了闭环控制系统的有界稳定.仿真结果表明了所研究控制方法的有效性.     

一套完整的基于视觉光流和激光扫描测距的室内无人机导航系统

提出了一套室内四旋翼无人机控制, 导航, 定位和地图构建的完整解决方案. 无人机机载系统包括三个主要传感器, 即惯性测量单元, 下视相机和激光扫描测距仪. 经过处理, 融合这些传感器的测量数据, 无人机能够可靠的估计自己的飞行速度和实时位置, 并且沿着室内的墙壁进行无碰撞飞行. 通过收集一个完整飞行实验的数据, 无人机的飞行路径和在室内的环境也可以被很好地估计出来. 这套系统中的自主导功能不需要任何远程传感信息或脱机计算能力. 这套室内导航方案的性能和可靠性已在实际的飞行实验中被验证.     

用于清洗绝缘子的四旋翼无人机抗回冲力控制

本文主要针对利用四旋翼无人机清洗绝缘子时受到的回冲力干扰及姿态控制问题,提出了一种用于清洗绝缘子的无人机抗回冲力控制方法.对于无人机系统,本文运用非线性控制方法中的反步法来设计姿态控制器,使其达到输入状态稳定,并对外部扰动具有鲁棒性.本文首先根据无人机运动模型建立了其动力学方程.之后,运用动量定理和流体力学中的伯努利方...     

无人机吊挂空运系统的自适应控制设计

针对四旋翼无人机吊挂空运系统存在的模型不确定性及欠驱动性问题,本文提出了一种基于能量耦合的自适应控制设计.首先,基于能量整形控制方法构造了一种新型的能量存储函数以处理状态耦合.然后利用神经网络对系统未建模动态特性进行在线估计,同时设计参数自适应律在线估计模型中的未知参数,并采用基于符号函数的鲁棒控制算法补偿神经网络的估计误差.本文运用李雅普诺夫方法和拉塞尔不变性原理对闭环系统的稳定性进行了证明,并且证明了负载摆动和无人机位置误差的渐近收敛性.最后,在室内实验平台上进行了飞行实验.实验结果表明,本文提出的非线性控制方法能够在有效抑制吊挂负载摆动的同时,实现无人机位置的精确控制.     

Output Feedback Control of a Quadrotor UAV Using Neural Networks

In this paper, a new nonlinear controller for a quadrotor unmanned aerial vehicle (UAV) is proposed using neural networks (NNs) and output feedback. The assumption on the availability of UAV dynamics is not always practical, especially in an outdoor environment. Therefore, in this work, an NN is introduced to learn the complete dynamics of the UAV online, including uncertain nonlinear terms like aerodynamic friction and blade flapping. Although a quadrotor UAV is underactuated, a novel NN virtual control input scheme is proposed which allows all six degrees of freedom (DOF) of the UAV to be controlled using only four control inputs. Furthermore, an NN observer is introduced to estimate the translational and angular velocities of the UAV, and an output feedback control law is developed in which only the position and the attitude of the UAV are considered measurable. It is shown using Lyapunov theory that the position, orientation, and velocity tracking errors, the virtual control and observer estimation errors, and the NN weight estimation errors for each NN are all semiglobally uniformly ultimately bounded (SGUUB) in the presence of bounded disturbances and NN functional reconstruction errors while simultaneously relaxing the separation principle. The effectiveness of proposed output feedback control scheme is then demonstrated in the presence of unknown nonlinear dynamics and disturbances, and simulation results are included to demonstrate the theoretical conjecture.      

四旋翼无人机PDF控制系统设计和抗干扰分析

针对传统的PID控制方法在对四旋翼无人机进行控制时动态响应差,抗干扰能力低等局限性,不能够满足高精度要求的四旋翼无人机应用场合的问题。本文以四旋翼无人机的姿态控制为研究对象,通过采用基于伪微分反馈(PDF)控制策略来设计其飞行控制器,以提高动态响应性能和抗干扰能力。在对四旋翼无人机数学建模的基础上,将PDF控制策略引入到四旋翼姿态控制中,提出基于四旋翼无人机对象的PDF控制设计方法,并分别完成PID、PDF控制器的设计和动态仿真。通过对仿真结果比较、分析表明PDF控制与PID姿态控制器相比,系统超调量小,具有更好的鲁棒性和抗干扰能力。     

Nonlinear Robust Tracking Control of a Quadrotor UAV on SE(3)

This paper provides nonlinear tracking control systems for a quadrotor unmanned aerial vehicle (UAV) that are robust to bounded uncertainties. A mathematical model of a quadrotor UAV is defined on the special Euclidean group, and nonlinear output‐tracking controllers are developed to follow (i) an attitude command, and (ii) a position command for the vehicle center of mass. The controlled system has the desirable properties that the tracking errors are uniformly ultimately bounded, and the size of the ultimate bound can be reduced arbitrarily by control system parameters. Numerical examples illustrating complex maneuvers are provided.     

无人机吊挂飞行的非线性控制方法设计

针对四旋翼无人机吊挂飞行系统,本文设计了一种新型控制策略.本文首先建立了四旋翼无人机吊挂系统的数学模型.其中负载被看作由刚性绳悬挂在四旋翼无人机重心位置的质点.之后本文通过能量分析的方法设计了针对此系统的非线性控制器.本文提出的控制方法可以在抑制吊挂负载摆动的同时将四旋翼无人机移动到目标位置.本文运用李雅普诺夫稳定性分析和拉塞尔不变性原理对闭环系统的稳定性进行了证明.最后,通过数值仿真,分别将本控制器镇定控制和调节控制的控制效果与线性二次调节器(linear-quadratic regulator,LQR)控制器进行了对比.     

饱和输入下四旋翼无人机滑模轨迹跟踪控制

为解决四旋翼无人机在饱和输入下的轨迹跟踪控制问题,同时兼顾系统存在的参数不确定性和外部风力扰动影响,设计了一种改进的抗干扰自适应鲁棒滑模控制方法;基于六自由度架构,设计四旋翼无人机简化的系统模型,进而降低控制器设计的复杂程度;引入带有误差信号的滑模函数,设计带有误差信号的饱和补偿自适应控制律,同时增加鲁棒控制项,降低由于饱和输入问题带来的抖振影响,并减小参数不确定和外部风力扰动对系统稳定性的影响;系统模型与抗干扰自适应控制律相结合,形成了改进的抗干扰自适应鲁棒滑模控制策略,实现四旋翼无人机的位置轨迹和姿态轨迹的稳定跟踪;最后通过数值仿真与传统PD控制算法进行仿真比较,验证控制方法的有效性和优越性。     

四旋翼无人机姿态系统的非线性容错控制设计

本文研究了四旋翼无人机执行器发生部分失效时的姿态控制问题.通过分析其动力学特性,将执行器故障以乘性因子加入系统模型,得到执行器故障情况下四旋翼无人机的姿态动力学模型.在同时存在未知外部扰动和执行器故障的情况下,设计了一种基于自适应滑模控制的容错控制器.利用基于Lyapunov的分析方法证明了所设计控制器的渐近稳定性.在四旋翼无人机实验平台上进行了实验,验证了该算法对存在未知外部扰动和执行器部分失效时四旋翼无人机的姿态控制具有较好的鲁棒性.     

Backstepping Approach for Controlling a Quadrotor Using Lagrange Form Dynamics

The dynamics of a quadrotor are a simplified form of helicopter dynamics that exhibit the same basic problems of underactuation, strong coupling, multi-input/multi-output design, and unknown nonlinearities. Control design for the quadrotor is more tractable yet reveals corresponding approaches for helicopter and UAV control design. In this paper, a backstepping approach is used for quadrotor controller design. In contrast to most other approaches, we apply backstepping on the Lagrangian form of the dynamics, not the state space form. This is complicated by the fact that the Lagrangian form for the position dynamics is bilinear in the controls. We confront this problem by using an inverse kinematics solution akin to that used in robotics. In addition, two neural nets are introduced to estimate the aerodynamic components, one for aerodynamic forces and one for aerodynamic moments. The result is a controller of intuitively appealing structure having an outer kinematics loop for position control and an inner dynamics loop for attitude control. The control approach described in this paper is robust since it explicitly deals with unmodeled state-dependent disturbances and forces without needing any prior knowledge of the same. A simulation study validates the results obtained in the paper.     

Adaptive fractional-order nonsingular fast terminal sliding mode formation control of multiple quadrotor UAVs-based distributed estimator

This paper mainly solves two major problems that are unavoidable in leader–follower formation process of quadrotor UAV group: the existence of external uncertainty disturbance and communication limited between quadrotor unmanned aerial vehicle (UAV) group. To solve the problem that only one of the followers in the leader–follower formation can obtain the leader's information, an improved distributed estimator is proposed in this paper, which can accurately estimate the leader's information for each follower. In addition, in order to eliminate the influence of uncertain external disturbance on the performance of quadrotor UAV, an adaptive estimation law is designed based only on velocity and position variables. For the attitude and position subsystem of the quadrotor UAV, a sliding surface with fractional-order term is designed. Which makes the quadrotor UAV tracking error system obtain good robustness at the stage of reaching the sliding surface and fast convergence and accurate tracking performance in the sliding stage. Based on Lyapunov stability theory, the convergence results are analyzed strictly. The results show that the algorithm can make the position distance between leader and followers converge to the desired offset. Simulation results verify the effectiveness and superiority of the control algorithm.     

四旋翼无人机鲁棒自适应姿态控制

 四旋翼无人机的姿态控制是自主飞行控制的核心,针对四旋翼姿态易受外界环境干扰和内部参数摄动等不确定性影响的问题,设计了一种鲁棒自适应反步控制器,以提高四旋翼的鲁棒性。建立了四旋翼完整的姿态运动模型,并将其转化为含有广义不确定性的多输入多输出非线性系统。根据该系统满足严格反馈的结构特点,设计了反步控制器; 针对系统中存在的外部干扰和内部参数摄动等不确定性,引入了一类鲁棒自适应函数来抵消该不确定性对系统的影响; 采用非线性跟踪微分器估计虚拟控制量的微分信号,减小了反步控制器设计中普遍存在的“计算膨胀”问题; 通过构造Lyapunov 函数证明闭环系统是稳定且指数收敛的。仿真结果表明,所设计控制器具有良好的控制效果和鲁棒性。     

All-round two-wheeled quadrotor helicopters with protect-frames for air–land–sea vehicle (controller design and automatic charging equipment)

This paper presents a new all-round Air–Land–Sea Unmanned Aerial Vehicle (UAV) and the automatic battery charging device. The new UAV is a quadrotor helicopter with two rolling protect-frames, which not only can fly in the air but also can move on the ground, the wall, the ceiling, and the water in all directions. In this paper, firstly, the dynamic equation is derived of the new UAV, which is described by a set of nonlinear equations. Secondly, some tracking problems are considered in both the flight mode and the ground one under uncertain inertia parameters, and useful adaptive control systems based on the input–output linearization are proposed for the position tracking control. The design problem is reduced to that of a linear system, and the design method is simple and straightforward. Finally, a new automatic battery charging device is developed for the UAV. It is the unique point that the connection operation to the charging terminal is carried out by ground rolling motion without precise landing from the air. Consequently, even if in windy outdoor and narrow indoor space, the proposed method can complete the battery charge safely and surely.