基于两段排样方式的矩形件优化下料算法

针对矩形件下料问题,提出一种基于两段排样方式的优化下料算法。首先构造一 种约束排样算法,生成矩形件在板材上的两段排样方式。然后采用列生成算法依据矩形件剩余 需求量迭代调用上述约束排样算法生成一个虚拟下料方案,按照不产生多余矩形件原则选取虚 拟下料方案中的部分排样方式加入到实际下料方案中,更新矩形件剩余需求量;重复上述步骤 直到矩形件剩余需求量为零。采用文献中基准例题将该算法与2 种文献算法进行比较,数值实 验结果表明该算法下料利用率比2 种文献算法分别高1.61%和0.78%。     

矩形毛坯最优三块排样的新算法

针对矩形毛坯二维下料问题,提出采用三块排样的下料算法,以达到最小化板材消耗量和简化切割工艺的目标。该算法将列生成法和排样方式生成算法相结合,生成一个含多个排样方式(排样图)的集合,然后通过解整数规划问题获得各个排样方式的使用次数。排样方式生成算法通过构造并求解整数规划模型,求出最优三块排样。采用的三块排样,切割工艺简单,能有效提高切割效率。实验结果表明,该算法可以明显减少板材消耗。     

基于两阶段的分段单一矩形优化排样

为有效解决分段单一矩形优化排样问题,给出一个求解分段单一矩形优化排样问题的两阶段方法。第一阶段完成标准子段最佳排样方式求解,并将二维排样问题转化为一维下料问题,第二阶段使用适合于一维下料问题求解的算法完成板材最佳排样方式求解。使用该方法开发了一个单一矩形优化排样系统,该系统既可以解决分段单一矩形排样问题也可以解决其他类型的单一矩形优化排样问题。企业应用实例表明该方法是求解分段单一矩形优化排样问题的一个较为有效的方法。     

面向可加工性的矩形件优化下料算法

针对目前矩形件优化下料算法侧重追求高材料利用率,而对实际切割成本考虑不足的现状,提出一种既维持高材料利用率,又使下料方案具有较低切割成本的矩形件优化下料算法。算法采用SVC框架和同质条带多级规范方式求解矩形件下料问题。利用条带共边排样的路径优化设计进行切割路径长度的计算,以生产成本（材料成本与切割成本之和）为优化目标得到高材料利用率、低切割成本的下料方案,最后通过实验证实该算法的可行性与有效性。     

基于蚁群优化算法求解矩形件排样问题

布局问题来源于生产实际,优秀的布局可以提高原料利用率,降低成本,提高经济效益,对许多行业有重要意义。矩形件优化排样是一类具有NP完全难度的组合优化问题。人工蚁群算法是对蚂蚁群体行为的模拟抽象,该算法具有分布计算、信息正反馈和启发式搜索等特点。本文将蚁群算法和剩余矩形法结合用于解决矩形排样问题,首先用蚁群算法将矩形件排样问题转化为一个排列问题;然后通过剩余矩形排样算法排出每一个排列所对应的排样图;最后用算法对文献[9]中的两个算例进行了验证,表明了其有效性。     

一种快速的有约束矩形件优化排样模型

为了有效地解决有约束的矩形件优化排样问题,提出一种快速的求解算法;通过比较待排样矩形件的不同排样模式,选择最优排样方案。算法完全基于解析计算,虽不能寻找理论最优解,但相比于各种启发式算法大大提高了排样速度。实验结果表明,算法能够在较短的计算时间内获得满意的排样效果,是一种效率较高的有约束矩形件排样算法。     

二维板材切割下料问题的一种确定性算法

研究二维板材切割下料问题,即使用最少板材切割出一定数量的若干种矩形件。 提出一种结合背包算法和线性规划算法的确定性求解算法。首先构造生成均匀条带四块排样方 式的背包算法;然后采用线性规划算法迭代调用上述背包算法,每次均根据生产成本最小原则 改善目标函数并修正各种矩形件的当前价值,按照当前价值生成新的排样方式;最后选择最优 的一组排样方式组成排样方案。采用基准测题,将该算法与著名的T 型下料算法进行比较,实 验结果表明,该算法比T 型下料算法更能节省板材,计算时间能够满足实际应用需要。     

矩形件优化排样的混合启发式方法

提出一种启发式递归与遗传算法相结合的混合启发式算法求解矩形件优化排样问题。首先给出一种启发式递归算法,利用该算法逐个从待排矩形件中生成局部利用率高的条料,直到所有待排矩形件均生成条料;利用遗传算法全局搜索能力强的特点,对这些条料序进行搜索重组,使其所用的板材数最少;最后再次利用遗传算法,对条料生成之前的矩形件种类序进行全局最优搜索,使总的板材利用率达到了最大。对两个典型实际算例进行计算,并与相关文献比较,结果表明了该算法的有效性。     

冲裁件条料最优四块剪切下料方案的生成算法

讨论冲裁件条料剪切下料方案的设计问题。下料方案由一组排样方式组成。首先构造一种生成条料最优四块排样方式的背包算法,然后采用基于列生成的线性规划算法迭代调用上述背包算法,每次都根据生产成本最小的原则改善目标函数并确定各种冲裁件的当前价值,按照当前价值生成一个新的排样方式,最后选择最优的一组排样方式组成下料方案。采用例题将该排样方式生成算法和文献中多段排样方式生成算法进行比较,实验计算结果表明,该算法得到的排样方式排样价值较高。最后通过文献中实例的下料方案求解,可以看出该算法解决实际下料问题是有效的。     

基于自适应遗传模拟退火算法的矩形件排样

研究一种自适应遗传模拟退火算法,应用于矩形件优化排样问题。以整数编码矩形件的排样序列,采用经验选择与随机生成相结合的策略构造初始种群。运用自适应交叉和变异概率动态地控制遗传算法的收敛速度,通过模拟退火算法引导全局最优搜索,采用启发式最低水平线择优算法对排样序列进行解码,形成排样方式。多组对比实验结果表明,自适应遗传模拟退火算法求解速度较快,可以有效提高板材的利用率。     

Developing a multi-objective,multi-item inventory model and three algorithms for its solution

We develop a multi-objective model in a multi-product inventory system.The proposed model is a joint replenishment problem(JRP) that has two objective functions.The first one is minimization of total ordering and inventory holding costs,which is the same objective function as the classic JRP.To increase the applicability of the proposed model,we suppose that transportation cost is independent of time,is not a part of holding cost,and is calculated based on the maximum of stored inventory,as is the case in many real inventory problems.Thus,the second objective function is minimization of total transportation cost.To solve this problem three efficient algorithms are proposed.First,the RAND algorithm,called the best heuristic algorithm for solving the JRP,is modified to be applicable for the proposed problem.A multi-objective genetic algorithm(MOGA) is developed as the second algorithm to solve the problem.Finally,the model is solved by a new algorithm that is a combination of the RAND algorithm and MOGA.The performances of these algorithms are then compared with those of the previous approaches and with each other,and the findings imply their ability in finding Pareto optimal solutions to 3200 randomly produced problems.     

Applying modified NSGA-II for bi-objective supply chain problem

This paper minimizes the value of total cost and bullwhip effect in a supply chain. The objectives have been achieved through developing a new multi-objective formulation for minimizing the total cost and minimizing the bullwhip effect of a two-echelon serial supply chain. A new crossover algorithm for a fuzzy variable and a new mutation algorithm have also been proposed while applying Non-dominated Sorting Genetic Algorithm-II (NSGA-II) to the proposed problem. The formulated problem has been simulated by Matlab software and the results of the modified NSGA-II have been compared with those of original NSGA-II. It is found from the results that the modified NSGA-II algorithm performs better than the original NSGA-II algorithm since the minimum values for both total cost and the bullwhip effect are obtained in case of the modified NSGA-II. The formulated bi-objective problem is new to the research community. The minimization of bullwhip effect has never been considered in a multi-objective optimization before. Besides crossover operator applied to the fuzzy variable and the mutation operator are newly introduced operators.     

数字微流控生物芯片布局的拟人遗传组合算法

数字微流控生物芯片布局问题是芯片设计的关键问题,它是在二维微流控阵列上为每个操作布局一个合适的物理位置,以达到完成所有操作的微流控阵列总面积最小和总时间最短两个目标。构建了拟人遗传组合算法,应用拟人启发式算法来控制数字微流控模块的布局过程,用遗传算法对布局结果进行多目标优化,以多元体液检测为实例,模拟了数字微流控生物芯片的布局优化过程。实验结果表明该算法不仅达到了优化目标,且优于并行混合模拟退火算法。     

一种多目标不等面积设施布局问题的启发式算法

多目标不等面积设施布局问题（UA-FLP）是将一些不等面积设施放置在车间内进行布局,要求优化多个目标并满足一定的限制条件。以物料搬运成本最小和非物流关系强度最大来建立生产车间的多目标优化模型,并提出一种启发式算法进行求解。算法采用启发式布局更新策略更新构型,通过结合基于自适应步长梯度法的局部搜索机制和启发式设施变形策略来处理设施之间的干涉性约束。为了得到问题的Pareto最优解集,提出了基于Pareto优化的局部搜索和基于小生境技术的全局优化方法。通过两个典型算例对算法性能进行测试,实验结果表明,所提出的启发式算法是求解多目标UA-FLP的有效方法。     

矩形件优化排样的一种启发式算法

对大规模矩形件正交排样问题,提出了一种快速高效的启发式排放算法。对当前的可排放位置（水平线）,用贪婪算法从未排矩形件中选择可排放于该水平线的最优矩形件组合块;根据各个排放位置与其对应的矩形件组合块的匹配程度,选择最优的可排放位置（最优水平线）优先排放。在排放时,为了便于后续排放,先将待排放位置对应的矩形件组合块从低到高进行排序,再排放。对E.Hopper提供的规模最大的一类实例进行计算,排样率都在99%以上,平均排样率达到了99.38%,平均计算时间只用了1.12秒。与相关文献最好结果进行了比较,结果表明该文算法解决大规模的矩形件排样具有高效性。     

Solving fuzzy capacitated location routing problem using hybrid variable neighborhood search and evolutionary local search

A fuzzy capacitated location routing problem (FCLRP) is solved by using a heuristic method that combines variable neighborhood search (VNS) and evolutionary local search (ELS). Demands of the customer and travel times between customers and depots are considered as fuzzy and deterministic variables, respectively in FCLRP. Heterogeneous and homogeneous fleet sizes are performed together to reach the least multi-objective cost in a case study. The multi-objective cost consists of transportation cost, additional cost, vehicle waiting cost and delay cost. A fuzzy chance constrained programming model is added by using credibility theory. The proposed method reaches the solution by performing four stages. In the first stage, initial solutions are obtained by using a greedy heuristic method, and then VNS heuristic, which consists of seven different neighborhood structures, is performed to improve the solution quality in the second stage. In the third stage, a perturbation procedure is applied to the improved solution using ELS algorithm, and then VNS heuristic is applied again in the last stage. The combination of VNS and ELS is called VNSxELS algorithm and applied to a case study, which has fifty-seven customers and five distributing points, effectively in a reasonable time.     

基于禁忌搜索的启发式算法求解球体Packing问题*

为求解具有NP难度的球体Packing问题,通过将禁忌搜索方法与基于自适应步长的梯度下降法和二分法相结合,提出了一个启发式算法。对50个等球算例进行了实例测试,算法改进了其中44个算例的目前最优结果。大量的实例计算结果表明,该启发式算法是求解球体Packing问题的一个有效算法。     

Self-adaptive metaheuristics for solving a multi-objective 2-dimensional vector packing problem

In this paper, a multi-objective 2-dimensional vector packing problem is presented. It consists in packing a set of items, each having two sizes in two independent dimensions, say, a weight and a length into a finite number of bins, while concurrently optimizing three cost functions. The first objective is the minimization of the number of used bins. The second one is the minimization of the maximum length of a bin. The third objective consists in balancing the load overall the bins by minimizing the difference between the maximum length and the minimum length of a bin. Two population-based metaheuristics are performed to tackle this problem. These metaheuristics use different indirect encoding approaches in order to find good permutations of items which are then packed by a separate decoder routine whose parameters are embedded in the solution encoding. It leads to a self-adaptive metaheuristic where the parameters are adjusted during the search process. The performance of these strategies is assessed and compared against benchmarks inspired from the literature.     

Extended guided tabu search and a new packing algorithm for the two-dimensional loading vehicle routing problem

In this paper, we develop an extended guided tabu search (EGTS) and a new heuristic packing algorithm for the two-dimensional loading vehicle routing problem (2L-CVRP). The 2L-CVRP is a combination of two well-known NP-hard problems, the capacitated vehicle routing problem, and the two-dimensional bin packing problem. It is very difficult to get a good performance solution in practice for these problems. We propose a meta-heuristic methodology EGTS which incorporates theories of tabu search and extended guided local search (EGLS). It has been proved that tabu search is a very good approach for the CVRP, and the guiding mechanism of the EGLS can help tabu search to escape effectively from local optimum. Furthermore, we have modified a collection of packing heuristics by adding a new packing heuristic to solve the loading constraints in 2L-CVRP, in order to improve the cost function significantly. The effectiveness of the proposed algorithm is tested, and proven by extensive computational experiments on benchmark instances.     

QPSO算法求解无约束多目标优化问题

在分析了用基于目标加权的PSO算法(WAPSO)的基础上,研究了利用基于量子行为的微粒群优化算法(QPSO)来解决多目标优化问题.提出了基于目标加权的QPSO算法(WAQPSO),利用WAQPSO算法解决无约束的多目标优化问题,通过典型的多目标测试函数实验,验证了该算法解决无约束多目标问题的有效性.