Subsolidus Phase Relationships in the System Fe2O3–Al2O3–TiO2 between 1000° and 1300°C

Subsolidus phase equilibria in the system Fe₂O₃–Al₂O₃–TiO₂ were investigated between 1000° and 1300°C. Quenched samples were examined using powder X-ray diffraction and electron probe microanalytical methods. The main features of the phase relations were: (a) the presence of an M₃O₅ solid solution series between end members Fe₂TiO₅ and Al₂TiO₅, (b) a miscibility gap along the Fe₂O₃–Al₂O₃ binary, (c) an α-M₂O₃( ss ) ternary solid-solution region based on mutual solubility between Fe₂O₃, Al₂O₃, and TiO₂, and (d) an extensive three-phase region characterized by the assemblage M₃O₅+α-M₂O₃( ss ) + Cor( ss ). A comparison of results with previously established phase relations for the Fe₂O₃–Al₂O₃–TiO₂ system shows considerable discrepancy.     

Influence of V2O5 Additions to 5Li2O–1Nb2O5–5TiO2 Ceramics on Sintering Temperature and Microwave Dielectric Properties

The effects of the addition of V₂O₅ on the sintering behavior, microstructure, and microwave dielectric properties of 5Li₂O–1Nb₂O₅–5TiO₂ (LNT) ceramics have been investigated. With low-level doping of V₂O₅ (≤3 wt%), the microstructure of the LNT ceramic changed from a special two-level intergrowth structure into a two-phase composite structure with separate grains. And the sintering temperature of the LNT ceramics could be lowered to around 900°C by adding a small amount of V₂O₅ without much degradation in microwave dielectric properties. Typically, better microwave dielectric properties of ɛ_r=41.7, Q × f =7820 GHz, and τ _f =45 ppm/°C could be obtained for the 1 wt% V₂O₅-doped ceramics sintered at 900°C.     

Microwave Dielectric Properties of 5Li2O–0.583Nb2O5–3.248TiO2 Ceramics with V2O5

The effects of V₂O₅ addition on the sintering behavior, microstructure, and the microwave dielectric properties of 5Li₂O–0.583Nb₂O₅–3.248TiO₂ (LNT) ceramics have been investigated. With addition of low-level doping of V₂O₅ (≤2 wt%), the sintering temperature of the LNT ceramics could be lowered down to around 920°C due to the liquid phase effect. A secondary phase was observed at the level of 2 wt% V₂O₅ addition. The addition of V₂O₅ does not induce much degradation in the microwave dielectric properties but lowers the τ_f value to near zero. Typically, the excellent microwave dielectric properties of ɛ_r=21.5, Q × f =32 938 GHz, and τ_f=6.1 ppm/°C could be obtained for the 1 wt% V₂O₅-doped sample sintered at 920°C, which is promising for application of the multilayer microwave devices using Ag as an internal electrode.     

Thermodynamic Modeling of the Isomorphous Phase Diagrams in the Al2O3–Cr2O3 and V2O3–Cr2O3 Systems

The phase diagrams in the Al₂O₃–Cr₂O₃ and V₂O₃–Cr₂O₃ systems have been assessed by thermodynamic modeling with existing data from the literature. While the regular and subregular solution models were used in the Al₂O₃–Cr₂O₃ system to represent the Gibbs free energies of the liquid and solid phases, respectively, the regular solution model was applied to both phases in the V₂O₃–Cr₂O₃ system. By using the liquidus, solidus, and/or miscibility gap data, the interaction parameters of the liquid and solid phases were optimized through a multiple linear regression method. The phase diagrams calculated from these models are in good agreement with experimental data. Also, the solid miscibility gap and chemical spinodal in the V₂O₃–Cr₂O₃ system were estimated.     

Effect of Alkali Metal Oxide Addition on the Sinterability of MgO–B2O3–Al2O3 Glass–Al2O3 Filler Composites

The sintering of a composite of MgO–B₂O₃–Al₂O₃ glass and Al₂O₃ filler is terminated due to the crystallization of Al₄B₂O₉ in the glass. The densification of a composite of MgO–B₂O₃–Al₂O₃ glass and Al₂O₃ filler using pressureless sintering was accomplished by lowering the sintering temperature of the composite. The sintering temperature was lowered by the addition of small amounts of alkali metal oxides to the MgO–B₂O₃–Al₂O₃ glass system. The resultant composite has a four-point bending strength of 280 MPa, a coefficient of thermal expansion (RT—200°C) of 4.4 × 10⁻⁶ K⁻¹, a dielectric constant of 6.0 at 1 MHz, porosity of approximately 1%, and moisture resistance.     

Synthesis of V2O3 Powder by Evaporative Decomposition of Solutions and H2 Reduction

The evaporative decomposition of solutions method was used to form V₂O₅. Spraying above the congruent melting temperature of V₂O₅ (690°C) resulted in dense spherical particles with a smooth surface. Spraying below the V₂O₅ melting temperature yielded porous V₂O₅ powder with a rough surface. Reduction of the V₂O₅ to V₂O₃ was done in a H₂ atmosphere. Spherical V₂O₃ powder was attained when the reduction temperature was low enough to reduce the V₂O₅ surface before partial sintering (necking) between V₂O₅ particles occurred. The resulting V₂O₃ particle size was smaller than the precursor V₂O₅ powder as expected by the differences in densities between V₂O₅ ( p = 3.36 g/cm³) and V₂O₃ ( p = 4.87 g/cm³).     

Structure and Properties of Low Phonon Antimony Glasses in the K2O–B2O3–Sb2O3–ZnO System

The monolithic glass-forming region of the low phonon and low softening point antimony glasses containing high Sb₂O₃ (40–75 mol%) in the novel quaternary K₂O–B₂O₃–Sb₂O₃–ZnO system has been found with the help of X-ray diffraction (XRD) analysis. The structure of a series of glasses with the general composition of (mol%) 15K₂O–15B₂O₃–(70− x )Sb₂O₃– x ZnO (where x =5–25) has been evaluated by infrared reflection spectral (FT-IRRS) analyses. All the glasses are found to possess a low phonon energy of around 600 cm⁻¹, as revealed by FT-IRRS. Their softening point ( T _s), glass transition temperature ( T _g), and coefficient of thermal expansion (CTE) have been found to vary in the ranges of 351°–379°C, 252°–273°C, and 195–218 × 10⁻⁷ K⁻¹, respectively. These properties are found to be controlled by their fundamental property, like the covalent character of the glasses, which is found to increase with an increase in Sb₂O₃ content. In addition, the devitrified glasses have been characterized by XRD and field emission scanning electron microscopy, which manifests the presence of nanozinc antimony oxide crystals with sizes of 21–43 nm. The exhibited properties have revealed that they are a new class of versatile materials.     

Electroconductive Al2O3–NbN Composites

Electroconductive Al₂O₃–NbN ceramic composites were prepared by hot pressing. Dense sintered bodies of ball-milled Al₂O₃–NbN composite powders were obtained at 1550°C and 30 MPa for 1 h under a nitrogen atmosphere. The bending strength and fracture toughness of the composites were enhanced by incorporating niobium nitride (NbN) particles into the Al₂O₃ matrix. The electrical resistivity of the composites decreased with increasing amount of NbN phase. For a 25 vol% NbN–Al₂O₃ composite, the values of bending strength, fracture toughness, Vickers hardness, and electrical resistivity were 444.2 MPa, 4.59 MPa·m^1/2, 16.62 GPa, and 1.72 × 10⁻²Ω·cm, respectively, making the composite suitable for electrical discharge machining.     

Effect of V2O5 Doping on the Sintering and Dielectric Properties of M-Phase Li1+x−yNb1−x−3yTix+4yO3 Ceramics

The effect of the addition of V₂O₅ on the structure, sintering and dielectric properties of M -phase (Li_{1+ x − y} Nb_{1− x −3 y} Ti _x +4 _y )O₃ ceramics has been investigated. Homogeneous substitution of V⁵⁺ for Nb⁵⁺ was obtained in LiNb_{0.6(1− x )}V_{0.6 x} Ti_0.5O₃ for x ≤ 0.02. The addition of V₂O₅ led to a large reduction in the sintering temperature and samples with x = 0.02 could be fully densified at 900°C. The substitution of vanadia had a relatively minor adverse effect on the microwave dielectric properties of the M -phase system and the x = 0.02 ceramics had [alt epsilon]_r= 66, Q × f = 3800 at 5.6 GHz, and τ_f= 11 ppm/°C. Preliminary investigations suggest that silver metallization does not diffuse into the V₂O₅-doped M -phase ceramics at 900°C, making these materials potential candidates for low-temperature cofired ceramic (LTCC) applications.     

Phase Equilibria in the Spinel Region of the System FeO-Fe2O3-Al2O3

Phase relations in the spinel region of the system FeO-Fe₂O₃-Al₂O₃ were determined in CO₂ at 1300°, 1400°, and 15000°C and for partial oxygen pressures of 4 × 10⁻⁷ and 7 × 10⁻¹⁰ atmospheres at 15OO°C. The spinel field extends continuously from Fe₃O_4-x to FeAl₂O_4+z.     

Stability Domains of TiO2–Ti3O5–Ti2O3–TiC/Ti(CN) Systems During Reduction Process

The phase domain of Ti₃O₅–Ti₂O₃–Ti(CO) at 1580 K was determined from the formation energies of Ti(C _x O _y ), as calculated via the Gibbs–Duhem equation. An extensive Ti(CO) domain is attributed to the high affinity between TiC and TiO. The phase domain of Ti₃O₅–Ti₂O₃–Ti(CN) was obtained at 1673 K using the formation energies of Ti(C _x N _y ). This study shows that the stable region for Ti₂O₃ is significantly small in the Ti₃O₅–Ti₂O₃–Ti(CN) phase domain. It demonstrates the absence of TiO and Ti₂O₃ in the normal syntheses of TiC and Ti(CN) from TiO₂, respectively.     

Oxidation State of Chromium in CaO–Al2O3–CrOx–SiO2 Melts under Strongly Reducing Conditions at 1500°C

Equilibrium ratios Cr²⁺/Cr³⁺ of chromium oxide dissolved in CaO–chromium oxide–Al₂O₃–SiO₂ melts have been determined by analysis of samples equilibrated at 1500°C under strongly reducing conditions ( p _o2= 10^−9.56 to 10^−12.50 atm). The majority of the chromium is divalent (Cr²⁺) under these conditions and Cr²⁺/Cr³⁺ ratios at given constant oxygen pressures decrease with increasing basicity of the melts, expressed as CaO/SiO₂ ratios. In addition, Cr²⁺/Cr³⁺ ratios, at a given CaO/SiO₂ ratio, are relatively unaffected by the amount of Al₂O₃ present.     

High-Temperature Thermal Expansion and Stability of V2AlC Up To 950°C

Herein, we report on the thermal expansion and stability of V₂AlC in the 25°–950°C temperature range. The sample was heated in an Argon atmosphere in a quartz capillary and the thermal expansion was measured using a X-ray synchrotron radiation source. Up to the maximum temperature explored, there were no signs of decomposition or phase transitions. The temperature variation of volumetric thermal expansion is given by α_v=2.53(5) × 10⁻⁵+5.75(3) × 10⁻⁹ T °C⁻¹. At ≈9.40 × 10⁻⁶°C⁻¹, the thermal expansions along both the a and c lattice directions are quite comparable; in other words, there is little thermal expansion anisotropy in V₂AlC.     

Determination of CaO–SiO2–MgO–Al2O3–CrOx Liquidus

In this work, the liquidus of synthetic CaO–SiO₂–MgO–Al₂O₃–CrO _x slags is evaluated in the industrially relevant compositional domain. Equilibrium experiments are carried out at 1500°C and partial oxygen pressure ( p _O2) 10^−11.04 atm, and at 1600°C and p _O2=10^−10.16 and 10^−9.36 atm. The studied basicities (CaO/SiO₂) are 1.2 and 0.5. Al₂O₃ levels range from 0 to 30 wt%. Oversaturated liquid is sampled and phase relations are measured with quantitative electron probe microanalysis–wavelength dispersive spectroscopy (EPMA–WDS). The results are compared with the commercially available FactSage thermodynamic databases. Qualitative agreement is always obtained. Also a good quantitative agreement is found at the higher basicity, especially for the spinel liquidus. A minor but systematic deviation can be observed for the eskolaite liquidus. At the lower basicity, the calculated phase diagram deviates strongly from the experimental results, probably due to missing ternary interactions in the database.     

Novel Fabrication Route to Al2O3–TiN Nanocomposites Via Spark Plasma Sintering

A novel method for the preparation of Al₂O₃–TiN nanocomposites was developed. A mixture of TiO₂, AlN, and Ti powder was used as the starting material to synthesize the Al₂O₃–TiN nanocomposite under 60 MPa at 1400°C for 6 min using spark plasma sintering. X-ray diffractometry, scanning electron microscopy, and transmission electron microscopy were used for detailed microstructural analysis. Dense (up to 99%) nanostructured Al₂O₃–TiN composites were successfully fabricated, the average grain size being less than 400 nm. The fracture toughness ( K _{I C} ) and bending strength (σ_b) of the nanostructured Al₂O₃–TiN composites reached 4.22±0.20 MPa·m^1/2 and 746±28 MPa, respectively.     

Effects of the Addition of Different Types of Fillers on the Properties of BaO–ZnO–B2O3–SiO2 Glass Composites for Application to Barrier Ribs of Plasma Display Panels

Various types of crystalline ceramic fillers (TiO₂, ZrO₂, Al₂O₃, MgO, and cordierite) were added to BaO–ZnO–B₂O₃–SiO₂ (BZBS) glass (5–20 wt%), and the resultant dielectric constant, coefficient of thermal expansion (CTE), and optical reflectance were investigated for the application of the composites to the barrier ribs in plasma display panels. All the investigated fillers were partially dissolved into the glass at the fabrication temperature (575°C), and the residual fillers were aligned along the boundaries of sintered glass frits. By considering all aspects of the properties, the addition of TiO₂ fillers of about 10 wt% to BZBS glass was the most desirable of the types of fillers investigated. The addition of TiO₂ filler (10 wt%) yielded 61% in optical reflectance, 8.3 × 10⁻⁶ K^–1 in coefficient of thermal expansion, and 15.5 in dielectric constant, which were properties comparable with the currently used Pb-based barrier ribs.     

Synchrotron Radiation Ti-k XANES Study of TiO2─Y2O3-Stabilized Tetragonal Zirconia Polycrystals

Valence state and site symmetry of Ti ions in TiO₂–Y₂O₃–ZrO₂ powders with 2 mol% Y₂O₃ and 5, 10, 15, and 20 mol% TiO₂, respectively, are studied by X-ray absorption near-edge spectroscopy (XANES). Tetravalent Zr⁴⁺ ions are replaced predominantly by Ti⁴⁺ ions. Within the solubility region of Ti ions, a subsequent displacement of Ti ions from the center of symmetry is observed with increasing TiO₂ content in TiO₂–Y₂O₃-stabilized tetragonal ZrO₂ polycrystals (Ti-Y-TZP) under investigation. This behavior cannot be interpreted with a random substitution of Ti⁴⁺ ions on Zr⁴⁺ lattice sites. On the contrary, this correlation between the TiO₂ content in Ti-Y-TZP and the shift of Ti ions indicates an increasing interaction between the Ti ions with growing TiO₂ content, caused by a subsequent clustering of Ti ions.     

Densification and Microstructural Development of SrTiO3 Sintered with V2O5

Precipitation of TiO₂ occurs during the sintering of SrTiO₃ with V₂O₅ added as a liquid-phase sintering agent. Satisfactory densification can be obtained at 1250°C when using a high content of V₂O₅ during sintering. However, a microstructure of fine grains and large pores results along with the precipitation of TiO₂. The precipitation of TiO₂ can be repressed by the addition of excess SrO. A well-sintered microstructure with superior densification can thus be obtained at 125O°C from specimens sintered with a low content of V₂O₅ and an appropriate amount of excess SrO.     

Formation of Frozen α-Agl in Twin-Roller-Quenched Agl─Ag2 O─MxOy (MxOy= WO3, V2O5) Glasses at Ambient Temperature

Superionic conductor α-AgI, which is stable only above 147°C, was successfully frozen at ambient temperature in AgI─Ag₂O─M_xO_y (M_xO_y= WO₃, V₂O₅) glass matrices by a twin-roller-quenching technique. The system with WO₃, provided the larger composition regions where α-AgI was frozen at ambient temperature, compared to the system with V₂O₅. The matrix glasses with higher glass-transition temperatures had a stronger effect in depressing the α–β transformation of AgI. The α-AgI-frozen samples exhibited extremely large conductivities of 3 × 10⁻²-5 × 10⁻²S.cm⁻¹at 25°C.