共查询到18条相似文献,搜索用时 93 毫秒
1.
本文介绍了在F18高精密电桥基础上,利用Visual Basic6.0,Access2000、Microsoft Excel及水晶报表为主要开发工具,以Windows为开发平台设计了一套完善的温度计自动测量检定系统。实验验证该系统提高了测量准确度及温度计检定的工作效率。 相似文献
2.
通过对数字温度计的构成及工作原理的阐述,从检定条件、检定设备、检定项目、检定方法以及数字温度计示值误差测量不确定度评定等方面,对测量范围为-80~ 300℃,温度传感器外置且具有100 mm以上信号传输线缆(或测量杆),以数字形式显示被测介质温度值的数字温度计首次检定、后续检定和使用中检验的方法进行了探讨. 相似文献
3.
4.
双金属温度计是一种测量中低温度的现场检测仪表,根据JJG226-2001《双金属温度计》检定规程和JJF1059-1999《测量不确定度评定与表示》的要求,对双金属温度计测量结果的不确定度进行有效评定,为双金属温度计的检定证书出具相关测量不确定度数据提供理论依据。 相似文献
5.
介绍了由标准铂电阻温度计与电阻测温仪组成的工作用温度计检定标准装置的组成、特点及与标准水银温度计装置的比较、测量温度的测量不确定度分析。 相似文献
6.
一等铂电阻温度计标准装置主要用于检定二等标准铂电阻温度计,检定程序繁琐、计算量大,迫切需要改进目前的装置,实现标准铂电阻温度计的智能检定。本文系统是对传统一等铂电阻温度计标准装置的智能升级,优化了标准铂电阻温度计的检定过程,能自动采集数据、自动处理数据,能生成证书内页及分度表。 相似文献
7.
《标准水银温度计检定规程》于2010年09月06日分布,规程将原有的一等标准水银温度计、二等标准水银温度计合并为标准水银温度计,检定它们的标准器为二等标准钔电阻温度计,本文从不确定度来源人手,评定标准水银温度计示值测量结果不确定度。 相似文献
8.
本文主要介绍温度自动检定校准系统的基本组成,功能和基本原理特点。提出的综合自动检定系统的特点是二等标准水银温度计与工业用热电偶热电阻温度计的检定装置合二为一,一套测量系统可面对多个恒温场输送过来的信号进行测试,体现信息时代特征的高科技产品开发方向。一机多用和计管合一是自动检定系统的核心思路。 相似文献
9.
提出了一种检定红外温度计的新方法。应用此方法 ,检定温度计是直接对准被测对象而不是黑体。此外 ,它回避了光谱发射率的测量和温度计光谱响应度的数据。 相似文献
10.
以标准水银温度计为研究对象,论述了标准水银温度计检定结果的误差来源及其测量不确定度的分析。 相似文献
11.
12.
本简要介绍了所研制的红外辐射式体温计的构成及标定实验方法;研究了环境温度对体温计的影响;并在实验基础上提出了采用分段标定及对环境温度补结果进行修正的方法,提出了测量精度。 相似文献
13.
14.
15.
16.
为了对冲击发电机的轴套温度进行监测,设计并研制了一种新型的红外光纤辐射温度计.温度计主要由红外空芯玻璃光纤、红外探测器、放大电路及80C552单片机组成.在分析各部分实现功能的基础上,重点研究了环境温度变化对探测器的影响,并实现了数学建模.温度计的工作波长是8~14μm,测量温度范围是60~400℃,测试环境温度范围是25~60℃.利用可精确控温的实物标定炉和环境模拟箱对温度计进行了标定,测量误差小于2%.经过几个月的在线监测,取得了较好的测量结果. 相似文献
17.
18.
B. Gutschwager J. Hollandt T. Jankowski R. Gärtner 《International Journal of Thermophysics》2008,29(1):330-340
A thermal infrared radiation thermometer was jointly developed by the Physikalisch-Technische Bundesanstalt and Raytek GmbH
for temperature measurements from − 150°C to 170°C under vacuum. The radiation thermometer is a purpose-built instrument to
be operated with the PTB reduced-background infrared calibration facility. The instrument is a stand-alone system with an
airtight housing that allows operation inside a vacuum chamber, attached to a vacuum chamber, and in air. The radiation thermometer
will serve to calibrate thermal radiation sources, i.e., blackbody radiators, by comparing their radiance temperature to that
of a variable-temperature reference blackbody inside the reduced-background calibration facility. Furthermore, since it can
be operated under vacuum and in air, the instrument also allows the water- and ammonia-heat-pipe reference blackbodies of
the PTB low-temperature calibration facility operated in air to be compared with the variable-temperature blackbody operated
under vacuum. Finally, provided that sufficient long-term stability is achieved, the instrument shall be used as a transfer
radiation thermometer to carry and compare the temperature scale of PTB by means of radiation thermometry to remote-sensing
calibration facilities outside PTB. The mechanical, optical, and electrical designs of the instrument are reported. Results
of investigations on the temperature resolution, size-of-source effect, and the reference function are given. The heat-pipe
blackbodies operating in air are compared to the variable-temperature blackbody operated under vacuum by using the vacuum
radiation thermometer.
References to commercial products are provided for identification purposes only and constitute neither endorsement nor representation
that the item identified is the best available for the stated purpose. 相似文献