Selective mercury determination after membrane complexation and total reflection X-ray fluorescence analysis

A new method for low mercury concentration analysis in drinking waters is presented. Membranes containing a few micrograms of various complexing reagents were produced on the surface of quartz glasses (reflectors). The reflectors were immersed in water solutions containing various concentrations of inorganic mercury salts at low concentrations (1-40 ng/mL). The membranes were left to equilibrate in 5-500 mL of solution for many hours; when the equilibration stage was finished they were cleaned with ultrapure water and left to dry. Analyses were performed by total reflection X-ray fluorescence (TXRF). The effects of various experimental parameters (complexing agent, equilibrium time, sample volume, etc.) as well as the selectivity of the membranes were studied. The complexing reagent dithizone with a PVC-based membrane gave the best results. The limit of quantitation was 0.8 ng/mL.     

Bromate determination in water after membrane complexation and total reflection X-ray fluorescence analysis

A new method for the determination of trace levels of bromates by selective membrane collection is presented. Various membranes containing a few micrograms of different complexing reagents in a poly(vinyl chloride) matrix were tested. These membranes were produced on the surface of quartz glass (reflectors), and they were immersed in solutions containing bromate and bromide ions. At the first stage the prepared membranes collected both bromate and bromide ions, so different bromide masking agents were put in the analyzed solutions to avoid bromide collection. By the end of the equilibration time, the reflectors were left to dry, and they were analyzed by total reflection X-ray fluorescence (TXRF). The poly(vinyl chloride) with aliquat-336 membrane and o-dianisidin complexing agent gave the best results. The minimum detection limit was equal to 0.9 ng/mL for ultrapure water and 1.0 ng/mL for drinking water.     

Development of a total reflection X-ray fluorescence spectrometer for ultra-trace element analysis

A simple and fairly inexpensive total reflection X-ray fluorescence (TXRF) spectrometer has been designed, constructed and realized. The spectrometer is capable of ultra-trace multielement analysis as well as performs surface characterization of thin films. The TXRF setup comprises of an X-ray generator, a slit-collimator arrangement, a monochromator/cutoff-stage, a sample reflector stage and an X-ray detection system. The glancing angle of incidence on the two reflectors is implemented using a sine-bar mechanism that enables precise angle adjustments. An energy dispersive detector and a GM counter are employed for measuring respectively the fluorescence intensities and the direct X-ray beam intensity. A Cu-target X-ray generator with its line focus window is used as an excitation source. The spectrometer is quite portable with its compact design and use of a peltier cooled solid state detector for energy dispersive detection. Alignment and characterization of the TXRF system has been performed and the minimum detection limits for various elements have been determined to be in the range of 100 pg to 5 ng even at low X-ray generator powers of 30 kV, 5 mA. The capability of the TXRF system developed for thin film characterization is also demonstrated.     

Total reflection X-ray fluorescence analysis: Physical foundations and analytical application (A review)

The current state of the art in one of the most promising techniques of X-ray spectral analysis, namely, total reflection X-ray fluorescence analysis (TXRF), is summarized. The underlying physical processes, including reflection, refraction, total external reflection (TER) of X-rays, and formation of standing waves by TER, are considered. The construction and crucial components of a modern energy-dispersive TXRF spectrometer, involving X-ray tubes, monochromators, detectors, and reflectors, are described. Examples of analytical application of TXRF are given. High efficiency of this technique for qualitative and quantitative chemical analysis of liquids and solids of various natures is demonstrated. The main research trends in surface analysis and investigation of surface layers of solids by TXRF are discussed.     

Determination of trace perchlorate in high-salinity water samples by ion chromatography with on-line preconcentration and preelution

A simple, automated system for the determination of trace perchlorate by ion chromatography (IC) with an online preconcentration technique is reported. The sample is preconcentrated, and less strongly held ions preeluted before the analyte is transferred to the principal separation system. This approach provides low limits of detection (LOD) and is particularly robust toward the effect of high concentrations of common anions, such as those present in groundwater samples. It compares favorably with currently promulgated EPA method 314.0. The LOD (S/N = 3) is 0.77 microg/L for a 2-mL reagent water sample and decreases more-or-less proportionately with increasing sample volume, at least up to 20 mL. Even with a sample of conductivity 14.7 mS/cm (approximately that of 0.1 M Na2SO4), the recovery of added perchlorate at the 25.0 microg/L level was still 92%. The concentration of added perchlorate in the range of 1-400 microg/L was linearly correlated to the peak area, with an r2 value of 0.9997. The recovery of perchlorate from artificial samples with different conductivity by the present method compares favorably with those from the currently recommended EPA Method. The ability of this approach to remove matrix interferences suggests that it would be also promising for perchlorate analysis in other challenging samples.     

Determination of perchlorate at trace levels in drinking water by ion-pair extraction with electrospray ionization mass spectrometry

Perchlorate has been added to the U.S. Environmental Protection Agency's Drinking Water Contaminant Candidate List (CCL). The present work describes the analysis of perchlorate in water by liquid-liquid extraction followed by flow injection electrospray mass spectrometry (ESI/MS). Cationic surfactants, mostly alkyltrimethyl-ammonium salts, are used to ion-pair aqueous perchlorate, forming extractable ion pairs. The cationic surfactant associates with the perchlorate ion to form a complex detectable by ESI/MS. The selectivity of the extraction and the mass spectrometric detection increases confidence in the identification of perchlorate. The method detection limit for perchlorate based on 3.14 sigma n-1 of seven replicate injections was 100 ng L-1 (parts per trillion). Standard addition was used to quantitate perchlorate in a drinking water sample from a contaminated source, and the concentration determined agreed within experimental error with the concentration determined by ion chromatography.     

Cloud-point preconcentration and spectrophotometric determination of trace amounts of molybdenum(VI) in steels and water samples

A cloud-point extraction process using micelle of the cationic surfactant CTAB to extract Mo(VI) from aqueous solutions was investigated. The method is based on the color reaction of molybdenum with bromopyrogallol red in the presence of potassium iodide at pH 1.0 glycine/HCl buffer media and micelle-mediated extraction of complex. The optimal extraction and reaction conditions (e.g., surfactant concentration, reagent concentration and effect of time) were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.3-320.0 ng mL(-1) of molybdenum(VI) ion and the detection limit of the method was 0.1 ng mL(-1). The relative standard deviation (R.S.D.) and relative error for five replicate measurements of 65.0 ng mL(-1) Mo(VI) were 1.1% and 1.9%, respectively. The interference effect of some anions and cations was also tested. The method was applied to the determination of molybdenum(VI) in steels and tap water and well water samples.     

Flame atomic absorption spectrometric determination of trace quantities of cadmium in water samples after cloud point extraction in Triton X-114 without added chelating agents

A new micell-mediated phase separation method for preconcentration of ultra-trace quantities of cadmium as a prior step to its determination by flame atomic absorption spectrometry has been developed. The method is based on the cloud point extraction (CPE) of cadmium in iodide media with Triton X-114 in the absence of any chelating agent. The optimal extraction and reaction conditions (e.g., acid concentration, iodide concentration, effect of time) were studied, and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration, and improvement factors) were obtained. Linearity was obeyed in the range of 3-300 ng mL(-1) of cadmium. The detection limit of the method is 1.0 ng mL(-1) of cadmium. The interference effect of some anions and cations was also tested. The method was applied to the determination of cadmium in tap water, waste water, and sea water samples.     

Spectrophotometric determination of mercury in water samples after cloud point extraction using nonionic surfactant Triton X-114

A cloud point extraction process using the nonionic surfactant Triton X-114 for extracting mercury from aqueous solutions was investigated. The method is based on the complexation reaction of Hg(II) with Thio-Michler's Ketone (TMK) and micelle-mediated extraction of the complex. The optimal extraction and reaction conditions (e.g., pH, reagent concentration, effect of time) were studied, and the analytical characteristics of the method (e.g., limit of detection, linear range) were obtained. Linearity was obeyed in the range of 5.0-80.0 ng mL(-1) of Hg(II) ion. The detection limit of the method was 0.83 ng mL(-1) of Hg(II) ion. The interference effect of some anions and cations was also tested. The method was applied to the determination of mercury in water samples.     

Wavelength-dispersive total-reflection X-ray fluorescence with an efficient Johansson spectrometer and an undulator X-ray source: detection of 10-16 g-level trace metals

The present paper reports significant enhancement of the detection power for total-reflection X-ray fluorescence (TXRF). The employment of an efficient wavelength-dispersive spectrometer rather than a conventional Si(Li) detector, as well as the use of a quasi-monochromatic undulator X-ray source, completely changed the quality of X-ray florescence spectra. The energy resolution is 20 times better, which effectively contributes to reducing the low-energy tail of the scattering background and to separating neighboring X-ray florescence peaks. Another advantage is its capability with respect to high-counting-rate measurements, which ensure the detection of weak signals from trace materials. The absolute and relative detection limit for nickel are 3.1 x 10(-16) g and 3.1 ppt (pg/g) for a 0.1-microL droplet of pure water, respectively, which is nearly 50 times better than the current best data achieved by conventional energy-dispersive TXRF using a Si(Li) detector system.     

Ion channel behavior of supported bilayer lipid membranes on a glassy carbon electrode

A new kind of solid substrate, a glassy carbon (GC) electrode, was selected to support lipid layer membranes. On the surface of the GC electrode, we made layers of didodecyldimethylammonium bromide (a synthetic lipid). From electrochemical impedance experiments, we demonstrated that the lipid layers on the GC electrode were bilayer lipid membranes. We studied the ion channel behavior of the supported bilayer lipid membrane. In the presence of perchlorate anions as the stimulus and ruthenium(II) complex cations as the marker ions, the lipid membrane channel was open and exhibited distinct channel current. The channel was in a closed state in the absence of perchlorate anions.     

Analysis of perchlorate in human urine using ion chromatography and electrospray tandem mass spectrometry

Because of health concerns surrounding widespread exposure to perchlorate, we developed a sensitive and selective method for quantifying perchlorate in human urine using ion chromatography coupled with electrospray ionization tandem mass spectrometry. Perchlorate was quantified using a stable isotope-labeled internal standard ((18)O(4)-perchlorate) with excellent assay precision (coefficient of variation <5% for repetitively analyzed quality control material). Analytical accuracy was established by blind analysis of certified proficiency testing materials prepared in synthetic urine matrix; calculated amounts deviated minimally from true amounts, with percent differences ranging from 2% to 5%. Selective chromatography and tandem mass spectrometry reduced the need for sample cleanup, resulting in a rugged and rapid method capable of routinely analyzing 75 samples/day. The lowest reportable level (0.025 ng/mL) was sufficiently sensitive to detect perchlorate in all human urine samples evaluated to date, with a linear response range from 0.025 to 100 ng/mL. This selective, sensitive, and rapid method will help elucidate any potential associations between human exposure to low levels of perchlorate and adverse health effects.     

Combining drop-to-drop solvent microextraction with gas chromatography/mass spectrometry using electronic ionization and self-ion/molecule reaction method to determine methoxyacetophenone isomers in one drop of water

A novel analytical technique termed drop-to-drop solvent microextraction (DDSME) was developed to determine three methoxyacetophenone isomers in one drop of water, which were then detected by gas chromatography/mass spectrometry using electronic ionization mass spectrometry for quantification analysis and self-ion/molecule reaction/tandem mass spectrometry for isomer differentiation. The best optimum parameters for the DDSME technique were as follows: extraction time, 5 min; using toluene as the extraction solvent; volume of extraction solvent, 0.5 microL and no salt addition. The advantages of this method are rapidity, convenience, ease of operation, simplicity of the device, and extremely little solvent and sample consumption. The limit of detection (LOD) for this technique was 1 ng/mL. The relative standard deviation was less than 2.6% (n = 5). The linear range of the calibration curve of DDSME is from 0.01 to 5 microg/mL with correlation coefficient (r2) of >0.954. In the comparison of the LOD of DDSME with other sample pretreatment methods including liquid/liquid extraction (LLE), single-drop microextraction (SDME), solid-phase microextraction (SPME), and liquid-phase microextraction (LPME) using a dual gauge microsyringe with hollow fiber methods, this method shows much better in sensitivity than the LLE (25 ng/mL) and it is compatible with SDME (0.5 ng/mL), SPME (0.5 ng/mL), and LPME using a dual gauge microsyringe with a hollow fiber (1 ng/mL). However, DDSME was more convenient than the LPME using a dual gauge microsyringe with a hollow fiber method and much lower cost than the SPME technique.     

Analysis of perchlorate in water by reversed-phase LC/ESI-MS/MS using an internal standard technique

A new method was developed for the analysis of perchlorate in water by using reversed-phase liquid chromatograhy/electrospray ionization-mass spectrometry/mass spectrometry (LC/ESI-MS/MS) in the negative ESI mode. Selective and sensitive perchlorate detection was obtained by monitoring the 35ClO4- --> 35ClO3- and 37ClO4- --> 37ClO3- mass transitions. The 35ClO4- --> 35ClO3- transition was quantitated against the internal standard oxygen-labeled sodium perchlorate (NaCl18O4). Sample pretreatment for the removal of major common anions and dissolved metal ions along with internal standard quantitation sufficiently compensated for ion suppression caused by the matrix. The 37ClO4- --> 37ClO3- transition was examined to provide additional specificity. The method sensitivity, accuracy, and precision were investigated by analyzing fortified blank samples, field samples, and performance evaluation samples. The results (1.01-13.5 microg/L) for the proficiency evaluation samples differed from the certified values (1.04-14.1 microg/L) by 3-18%. The developed reversed-phase LC/ESI-MS/MS method was rapid, accurate, and reproducible. The calculated method detection limits were 0.007 microg/L for deionized reagent water and 0.009 microg/L for synthesized reagent water, respectively. The minimum reporting limit was conservatively set to 0.05 microg/L.     

用TXRF技术分析镍基溶液中的痕量元素

本文介绍了应用自制全反射X荧光分析仪,测定了镍基溶液中痕量杂质元素Fe、Co、Cu、Zn、Pb,其中元素最小含量在10~(-1)μg/ml量级。配制的标准样品中Pb的含量最低,0.050μg/ml,分析结果为0.069μg/ml,偏差为±38％。为了减小测量误差,采取用化学方法降低镍含量的措施。降镍稀释处理后的Pb的含量最小,0.015g/ml,还原到原液含量为0.87μg/ml。     

Structure, magnetic and ion-exchange properties of self-assembled triaza-copper(II)-oxalate hybrides having nanoscale one-dimensional channel

The X-ray structure, porous and magnetic property of a self-assembled network 1 is described in detail. The single crystal X-ray analysis provides 1 as a three-dimensional network, which contains two-dimensional permanent ring forming nanoscale one-dimensional channels. The inter-replacement of perchlorate and hexafluorophosphate anions in solid 1 proves its porous structure. There is somewhat strong antiferromagnetic interaction (J = -74.1 cm(-1)) between two copper(II) ions through oxalate bridge and weak antiferromagnetic interaction (J = -5.1 cm(-1) through AEP ligand.     

Determination of metals by total reflection X-ray fluorescence and evaluation of toxicity of a river impacted by coal mining in the south of Brazil

Metal (Fe, Mn, Zn, Ni, Cd, and Pb) concentrations in the region of Criciuma (Brazil), a region impacted by coal mining, were determined in water and sediments using total reflection X-ray fluorescence (TXRF) spectroscopy. Samples were collected from the M?e Luzia River (south Brazil) at five different stations, from the source down to the river mouth (Ararangua estuary). Water and sediment toxicity were also evaluated using bioassays with Daphnia magna as the bioindicator. The metal present in the highest concentrations both in water (1.3-11 mg L(-1)) and in sediments (34-142 mg L(-1)) was iron. Results suggest an influence of coal mining on the aquatic receptors, showing a clear relationship between metal content (mostly Fe) and ecotoxicity.     

Reference-free total reflection X-ray fluorescence analysis of semiconductor surfaces with synchrotron radiation

Total reflection X-ray fluorescence (TXRF) analysis is a well-established method to monitor lowest level contamination on semiconductor surfaces. Even light elements on a wafer surface can be excited effectively when using high-flux synchrotron radiation in the soft X-ray range. To meet current industrial requirements in nondestructive semiconductor analysis, the Physikalisch-Technische Bundesanstalt (PTB) operates dedicated instrumentation for analyzing light element contamination on wafer pieces as well as on 200- and 300-mm silicon wafer surfaces. This instrumentation is also suited for grazing incidence X-ray fluorescence analysis and conventional energy-dispersive X-ray fluorescence analysis of buried and surface nanolayered structures, respectively. The most prominent features are a high-vacuum load-lock combined with an equipment front end module and a UHV irradiation chamber with an electrostatic chuck mounted on an eight-axis manipulator. Here, the entire surface of a 200- or a 300-mm wafer can be scanned by monochromatized radiation provided by the plane grating monochromator beamline for undulator radiation in the PTB laboratory at the electron storage ring BESSY II. This beamline provides high spectral purity and high photon flux in the range of 0.078-1.86 keV. In addition, absolutely calibrated photodiodes and Si(Li) detectors are used to monitor the exciting radiant power respectively the fluorescence radiation. Furthermore, the footprint of the excitation radiation at the wafer surface is well-known due to beam profile recordings by a CCD during special operation conditions at BESSY II that allow for drastically reduced electron beam currents. Thus, all the requirements of completely reference-free quantitation of TXRF analysis are fulfilled and are to be presented in the present work. The perspectives to arrange for reference-free quantitation using X-ray tube-based, table-top TXRF analysis are also addressed.     

Use of solid-phase microextraction for the quantitative determination of herbicides in soil and water samples

An in-depth study of SPME optimization and application has been made, considering not only aqueous (surface water and groundwater samples) but also the more complex soil samples. Seven herbicides widely used in the area of study have been selected including five triazine herbicides (atrazine, simazine, terbumeton, terbuthylazine, terbutryn), molinate, and bromacil. linearity range was between 0.1 and 10 ng/mL and the repeatability below 10% when applying the optimized SPME procedure to water samples. Reproducibility was found to be lower than 20% at the 1 ng/mL level, and the limits of determination in environmental water samples using GC/MS (SIM mode) were well below 0.1 ng/mL (values ranging from 10 to 60 ng/L). Extraction of selected herbicides from soil was carried out by microwave-assisted solvent extraction using methanol in screw-capped vials, leading to recoveries over 80% in spiked soil samples at the 5-200 ng/g level. SPME application over methanolic soil extracts required a 10-fold dilution with distilled water. The recommended procedure was found to be fully applicable for quantitative determination of selected herbicides in soils containing low organic matter content with coefficients of variation below or around 10% and limits of determination ranging from 1 to 10 ng/g. Both procedures were applied to real-world surface water and soil samples where several pesticides were detected including atrazine, simazine, terbuthylazine, and molinate.     

Determination of trace metals in drinking water using solid-phase extraction disks and X-ray fluorescence spectrometry

A convenient method is described for monitoring Cd, Ni, Cu, and Pb at trace levels in drinking water samples. These metals are preconcentrated on a chelating solid-phase extraction disk and then determined by X-ray fluorescence spectrometry. The method tolerates a wide pH range (pH 6-14) and a large amount of alkaline and alkaline earth elements. The preconcentration factor is well over 1600, assuming a 1 L water sample volume. The limits of detection for Cd, Ni, Cu, and Pb are 3.8, 0.6, 0.4, and 0.3 ng/mL, respectively. These are well below the federal maximum contaminant level values, which are 5, 100, 1300, and 15 ng/mL, respectively. The proposed method has many advantages including ease of operation, multielement capability, nondestructiveness, high sensitivity, and relative cost efficiency. The solid-phase extraction step can be conducted in the field and then the disks can be mailed to a laboratory for the analysis, eliminating the cost of transporting large volumes of water samples. Furthermore, the color of the used extraction disk provides an initial estimate of the degree of contamination for some transition metals (for example, Ni and Cu). Thus, the overall cost for analysis of metals in drinking water can be minimized by implementing the method, and small water supply companies with limited budgets will be better able to comply with the Safe Drinking Water Act.