Radical Copolymerization of 2-(3′-Acryloxy)propoxythioxanthone and 1-Methyl-4-(3′-acryloxy)propoxythioxanthone with Methyl Methacrylate

Two new monomers based on thioxanthone, 2-(3′-acryloxy)propoxythioxanthone (M-2) and 1-methyl-4-(3′-acryloxy)propoxythioxanthone (M-4), were prepared and their radical copolymerization at 70°C with methyl methacrylate (MMA) was studied. By varying the conversion reached for a fixed feed composition, f_MMA=0·983, and using Jaacks method, the reactivity ratios were determined. Identical values of reactivity ratios were found for both systems, with values of r_MMA=2·46 and r_M-2=r_M-4=0·4. The homopolymerization of MMA in the presence of a model compound, 1-methyl-4-propoxythioxanthone, was also examined and confirmed that the thioxanthone chromophore does not have any influence on the free radical polymerization of MMA. © of SCI.     

Two novel Zn(II) coordination polymers based on trigonal ligand: 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine

Two novel Zn(II) coordination polymers, [Zn₅(pytpy)₈(fum)₄(H₂O)₄(OH)₂]_n · n(CH₃OH) · 2n(H₂O) (1) and [Zn₃(pytpy)₄ (btc)₂]_n · 2n(H₂O) (2) (pytpy = 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine, H₂fum = fumaric acid, H₃btc = 1,3,5-benzenetricarboxylic acid) have been hydrothermally synthesized and structurally characterized. Complex 1 is a 2D layer structure, which is constructed from linear pentanuclear Zn(II) subunits interconnected via bidentate-bridging pytpy ligands and tridentate-bridging fum²⁻ anions. Complex 2 is a 3D network structure, μ₂-pytpy ligands link the layers based on the heart-like hexanuclear subunits to form the 3D network. Both complexes show strong fluorescence emission upon excitation at 310 nm in solid state. Additionally, these two complexes possess great thermal stabilities, especially for 2, the framework is stable up to 350 °C.     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Reversible addition-fragmentation chain transfer polymerization of 7-(4-(acryloyloxy)butoxy)coumarin

The light sensitive vinyl monomer with coumarin unit, 7-(4-(acryloyloxy)butoxy)coumarin (7AC), was synthesized. The reversible addition-fragmentation chain transfer (RAFT) polymerization of 7AC, initiated by 2,2′-azobisisobutyronitrile (AIBN), was carried out using 2-cyanoprop-2-yl dithiobenzoate (CPDB) as a RAFT agent in N,N-dimethylformamide (DMF) solution. The kinetics exhibited first-order relationship with respect to the monomer concentration. The molecular weight of the polymer increased linearly with the monomer conversion. The chain extension of poly(7-(4-(acryloyloxy)butoxy)coumarin) (P7AC) using styrene (St) as the second monomer demonstrated that the obtained polymers were almost “living”. The fluorescence intensity of P7AC increased with the molecular weight of P7AC and was stronger than that of the monomer. The obtained polymer had strong ultraviolet (UV) absorption at 322 nm. The molecular weights of the polymer had no effect on its ultraviolet absorption intensity. The coumarin structure existing in P7AC underwent [2 + 2] cycloaddition reaction (photodimerization) under UV irradiation in tetrahydrofuran (THF) solution, which can be further used to prepare small particles from the single polymer.     

Photopolymerization of Methyl Methacrylate Sensitized by Tris(2,2′-bipyridine)iron(III)

The photopolymerization of methyl methacrylate (MMA) sensitized by tris(2,2′-bipyridine)iron(III ) complex, [Fe(bpy)₃]³⁺, was studied at 35°C in the presence of an electron donor, triethylamine (TEA) with UV radiation of wavelength 254nm. The initial rate of polymerization, R_p, shows a linear dependence on [MMA] with an exponential value of 1·18±0·04. R_p varies linearly with the square root of the photosensitizer concentration up to 2·00×10^-4moll^-1, and above this concentration, R_p decreases with the increase of photosensitizer concentration. The rate of polymerization is not affected by the concentration of the co-initiator, [TEA]. A suitable mechanism for the reaction is proposed to explain the kinetics of the reaction. © 1997 SCI.     

Magnetic behavior within a new Ni(mnt)2-based molecular solid containing 1-(2′-fluorobenzyl)isoquinolinium

A novel molecular solid, [OFBzIQl][Ni(mnt)₂] (1), where [OFBzIQl]⁺ = 1-(2′-fluorobenzyl)isoquinolinium and mnt²⁻ = maleonitriledithiolate, forms 1D column of alternating between cations and anions via ππ stacking interaction between Ni(mnt)₂ plane and isoquinoline ring, and the Ni(mnt)₂ anions between the adjacent columns exist short CN interaction. The extensive hydrogen bonds between anions and cations in the crystal generate a 2D network structure. Magnetic susceptibility measurement for 1 in the temperature range 2.0–300 K shows that 1 exhibits a magnetic constant transition from ferromagnetic to antiferromagnetic around 35 K as the temperature is lowered.     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Synthesis of pyrazolo[4′,3′:5,6]pyrazino[2,3-c]pyrazoles and pyrazolo[4′,3′:5,6]pyrazino[2,3-d]pyrimidines and their application to polyester fibres

4-Nitroso-1-phenyl-3-methyl-5-aminopyrazole ( 1 ) was condensed with ethylcyanoacetate ( 2 ), malononitrile ( 4a ) and 2-cyanomethylbenzimidazole ( 4b ) to yield 6-hydroxy-5-cyano, 6-amino-5-cyano and 6-amino-5-(benzimidazol-2-yl)-3-methylpyrazolo [3,4-b]pyrazines 3, 5a and 5b , respectively. 5-Cyano-6-chloro derivative 6 obtained from 3 was converted to 3-aminopyrazolo[4′,3′:5,6]pyrazino[2,3-c]pyrazoles 8a and 8b by the treatment with hydrazin hydrate ( 7a ) and phenylhydrazine ( 7b ), respectively. Compound 5a was treated with formamide ( 9a ), urea ( 9b ) and thiourea ( 9c ) to give 4-aminopyrazolo[4′,3′:5,6]pyrazino[2′3′-d]pyrimidines 10a–10c. With refluxing acetic anhydride compounds 8a, 8b and 10a gave corresponding acetamido derivatives 8c, 8d and 10d. Compound 5a was treated with ethylorthoformate ( 11 ), acetic anhydride ( 12 ) or benzoylchloride ( 13 ) to give fused benzimidazopyrazolo[4′,3′:5,6]pyrazino[2′,3′-d]pyrimidines, viz., benzimidazol[1,2-c]pyrazolo[4,3-g]pteridines ( 14a–14c ). Some of the compounds 8, 10 and 14 were applied to polyester as disperse dyes and their fastness properties were studied.     

Investigation of the Solubility of 3,4‐Diaminofurazan (DAF) and 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF) at Temperatures Between 293.15 K and 313.15 K

The solubilities of 3,4‐diaminofurazan (DAF) and 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF) were investigated in water, dichloromethane, acetonitrile, ethyl acetate, methanol, and acetone between 293.15 K and 313.15 K. The solubility was determined by high‐pressure liquid chromatography with ultraviolet detection. The solubilities of DAF and DAAF are increased with the increasing of temperature in all solvents studied. The enthalpy of solution in each solvent was calculated according to van't Hoff Equation.     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Synthesis and properties of novel flame‐retardant poly(amide‐imide)s containing phosphine oxide moieties in main chain by microwave irradiation

Eight new flame‐retardant poly(amide‐imide)s with high inherent viscosities containing phosphine oxide moieties in main chain were synthesized from the polycondensation reaction of N,N′‐(3,3′‐diphenylphenylphosphine oxide) bistrimellitimide diacid chloride 7, with eight ;aromatic diamine 8a–h by two different methods such as solution and microwave‐assisted polycondensation. Results showed that the microwave‐assisted polycondensation by using a domestic microwave oven proceeded rapidly, compared with solution polycondensation and were completed within about 10–12 min. The resulting poly(amide‐imide)s 9a–h showed high thermal stability and flame‐retardant properties. All of the obtained polymers were fully characterized by means of elemental analysis, viscosity measurements, solubility test, and FTIR spectroscopy. Thermal properties of the PAIs 9a–h were investigated by using thermal gravimetric analysis (TGA), derivative thermogravimetric analysis (DTG), and differential scanning calorimetry (DSC). Char yield measurements at 600°C demonstrated that incorporating phosphine oxide moieties in polymer backbone markedly improves their flame retardancy. All of the earlier polymers were soluble at room temperature in various organic solvents such as NMP, DMF, DMSO, DMAc, and concentrated sulfuric acid. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4263–4269, 2006     

New photosensitive poly(amid‐imide)s containing chalcone moiety and hydantoin derivatives in the main chain: Synthesis and characterization

Six new poly(amid‐imide)s containing chalchone and hydantoin moieties in the main chain were synthesized through the polycondensation reaction of 1,3‐bis[4,4′‐bis(trimellityimido)phenyl]‐2‐propenone 6 with six hydantoin derivatives 7a‐f in a medium consisting of triphenyl phosphite, calcium chloride, pyridine, and N‐methyl‐2‐pyrrolidone. The polycondensation reaction produced a series of novel poly(amid‐imide)s 8a‐f in high yields with inherent viscosities between 0.26 and 0.42 dL/g. The resulting polymers were characterized by elemental analysis, viscosity measurements, solubility test, thermo gravimetric analysis (TGA and DTG), FTIR, and UV‐Vis spectroscopy. 1,3‐bis[4,4′‐bis(trimellityimido)phenyl]‐2‐propenone 6 was prepared from a three‐step reaction by using 4‐nitro benzaldehyde 1 and 4‐nitro acetophenone 2 as precursors. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Chemical modification of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride polyimides by a catechol‐derived bis(ether amine)

Having previously demonstrated that the polyimide derived from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 1,2‐bis(4‐aminophenoxy)benzene [termed triphenyl ether catechol diamine (TPEC)] exhibited superior tensile properties in addition to good thermal properties, we now provide a preliminary assessment of the properties of the copolyimides prepared from BPDA, TPEC, and another aromatic diamine. The homopolyimides derived from BPDA and many aromatic diamines generally possessed good mechanical properties and thermal properties; however, they were insoluble in available organic solvents. In several cases, organosoluble BPDA copolyimides could be prepared from BPDA and equimolar mixtures of TPEC and another aromatic diamine. All the copolyimides could be formed into tough films with high moduli and strengths and, in most cases, high extensions to break. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 351–358, 2002; DOI 10.1002/app.10342     

Synthesis and properties of organosoluble poly(ether imide)s containing 4,4′(octahydro-4,7-methano-5H-inden-5-ylidene) cardo group

A series of organosoluble aromatic poly(ether imide)s (PEIs) VIIa-k were synthesized from 4,4′-[(octahydro-4,7-methano-5H-inden-5-ylidene)bis(1,4-phenylene)dioxy] diphthalic dianhydride (IV) and various aromatic diamines. PEIs synthesized through two-stage polymerization had inherent viscosities of 0.51–0.64 dL/g. This series of polymers could also be synthesized from IV and diamines in a small amount of refluxing m-cresol in a one-step process and had inherent viscosities of 0.65–0.87 dL/g. For the low melting point diamines (Vj and Vk), polymers could be obtained by bulk polymerization and had inherent viscosities of 0.36 and 0.41 dL/g. Polymers showed good organosolubility and could be cast into transparent, flexible, and tough polyimide films with good tensile properties. These PEIs had glass transition temperatures among 203–281°C. Thermogravimetric analyses established that these polymers were fairly stable up to 430°C, and the 10% weight loss temperatures were recorded in the range of 473–503°C in nitrogen and 481–512°C in air atmosphere. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 987–996, 1999     

Methacrylic polymers containing permanent dipole azobenzene chromophores spaced from the main chain: synthesis and characterization

Three photochromic monomers containing a permanent dipole photochromic azobenzene group separated from the methacryloyl moiety by a polymethylene spacer, namely 4-(4-oxy-4′-cyanoazobenzene)but-1-yl methacrylate, 6-(4-oxy-4′-cyanoazobenzene)hex-1-yl methacrylate, and 8-(4-oxy-4′-cyanoazobenzene)oct-1-yl methacrylate, were synthesized in three steps starting from 4-cyanoaniline. These monomers were homopolymerized and copolymerized with an optically active monomer, (−)-menthyl methacrylate, in the presence of AIBN as a radical initiator. The polymeric materials, having a molar content of photochromic units comprised between 5 and 100% and molecular weights of about 15000, were characterized by an almost random distribution of monomeric units and a glass transition temperature ranging from 35 to 131°C. Polymer samples having a content of aromatic units larger than 75% were characterized by a thermotropic liquid crystalline structure, as evidenced by optical microscopy, X-ray diffraction and DSC measurements. Two-dimensional correlations spectroscopy (COSY) allowed an appreciable contribution by intramolecular charge transfer mesomers to the electronic distribution of the azobenzene chromophore to be highlighted. © 1998 Society of Chemical Industry     

Synthesis and properties of copolyesters of p,p′‐bibenzoic acid,dimer acid,and alkylene glycol

Copolyesters of p,p′‐bibenzoic acid, dimer acid, and an alkylene glycol are prepared by melt polycondensation of of dimethyl p,p′‐bibenzoate, dimer acid, and an alkylene glycol. The copolyesters are characterized by the inherent viscosity, FTIR, proton NMR, DSC, polarized microscopy, and X‐ray diffraction. The polymer composition and sequence distribution of the copolyesters can be seen from the NMR spectra. The copolyesters exhibit a degree of randomness of about 1, indicating that they are random copolymers. The glass‐transition temperature (T_g) and the melting point (T_m) of the copolyesters are found from the DSC heating curves. When the content of the flexible dimer acid unit increases, the T_g of the copolyesters decreases significantly. The copolymerization effect decreases the crystallinity and the T_m of the copolyesters. It can be seen from the DSC, polarized microscopy, and X‐ray diffraction data that some copolyesters derived from 1,6‐hexanediol and 1,5‐pentanediol exhibit a monotropic smectic phase. As the molar content of the dimer acid unit increases, the isotropic–mectic transition temperature and the smectic order decreases significantly. The liquid crystallinity is completely destroyed at certain molar contents of the dimer acid unit. The smectic order of the copolyesters derived from 1,6‐hexanediol is significantly higher than that of the copolyesters derived from 1,5‐pentanediol, and it is described as an odd–even effect. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 750–758, 2003     

The synthesis and characterization of 2-(2′-pyridyl)benzimidazole heteroleptic ruthenium complex: Efficient sensitizer for molecular photovoltaics

The novel ligand 1-(2,4,6-trimethylbenzyl)-2-(2′-pyridyl)benzimidazole and its heteroleptic ruthenium (II) complex were synthesized. The complex was characterized using spectroscopic methods and cyclic voltammetry. Charge-separation was investigated within nanoporous titanium dioxide employing surface photovoltage spectroscopy. The performance of the ruthenium complex as a charge transfer photosensitizer in nanocrystalline, titanium dioxide-based, dye sensitized solar cells was studied under standard AM 1.5 sunlight using an electrolyte consisting of 0.6 M 1-butyl-3-methyl-imidazolium iodide, 0.1 M lithium iodide, 0.05 M iodine and 0.5 M 4-tert-butyl pyridine in 3-methoxy propyonitrile. The novel complex had a photocurrent density of 9.47 mA cm⁻², 600 mV open circuit potential and 0.60 fill factor yielding an efficiency of 3.4%. The photovoltaic performance of the colorant was compared with that of cis-bis(isothiocyanato)(2,2'-bipyridyl-4,4'-dicarboxylato) (2,2’-bipyridyl-4,4’-di-nonyl) ruthenium(II); both compounds exhibited similar efficiency, while the fill factor value was higher for the novel dye.