Preparation and kinetic characterization of attapulgite grafted with poly(methyl methacrylate) via R-supported RAFT polymerization

Poly(methyl methacrylate) brushes grafted from attapulgite nanoparticles (ATP@PMMA) were prepared by R-Supported reversible addition-fragmentation chain transfer polymerization (RAFT). ATP was firstly activated, and allowed to react with γ-aminopropyltriethoxysilane (APTES), 4,4′-azobis(4-cyanovaleric acid) (ACVA) and bis(thiobenzoyl) disulfide stepwise to afford 4-cyanopentanoic acid dithiobenzoate functionalized ATP (ATP-CPADB). Then, RAFT polymerizations of MMA mediated by the different systems were conducted and compared systemically. The grafting process was verified by FTIR, XRD, XPS, TGA and TEM data. Kinetic behavior indicated that the anchored CPADB is more effective before diffusing into the bulk phase. The grafting ratio (G _r), while M _n of grafted and free polymer increased linearly with increasing monomer conversion in presence of free CPADB, giving the hybrid particles with more homogeneous distribution of grafted polymer layer.     

Novel jute yarns grafted with methyl methacrylate

This research work involves graft copolymerization of jute fibers with methyl methacrylate (MMA), initiated by cerric ions, and optimization of the grafting parameters as a function of different polymerization conditions. It was considered to produce a hydrophobic jute fiber with enhanced properties. To achieve this, the effects of monomer concentration and grafting percentage on FTIR spectra, mechanical properties, moisture regain, oil‐adsorption capacity, and surface morphology were investigated, and optimum percentage of MMA with reasonable properties was suggested. The results indicated that cerric ions initiated graft copolymerization of MMA onto jute with 30% of weight of monomers at optimum conditions of acid concentration and temperature. The FTIR studies proposed grafting of MMA onto jute at hydroxyl groups. The results showed that mechanical properties and moisture regain (%) of samples decrease with increasing of graft percentage. The most remarkable features of this investigation include reducing oil‐adsorption capacity with increasing of lipophilic monomer percentages after one limitation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of copolymers from methyl methacrylate and cardanyl methacrylate

Copolymers of methyl methacrylate (MMA) and cardanyl methacrylate (CMA) were synthesized, characterized and their physico-mechanical properties were investigated. The benzoyl peroxide-initiated copolymerization was carried out by using different mole fractions of CMA (0.02–0.10) in the initial feed at 80°C. Structural characterization of copolymers was done using FTIR and ¹H NMR spectroscopic techniques. The thermal stability of the copolymers was evaluated using dynamic thermogravimetry. Incorporation of CMA in the MMA backbone leads to an improvement in thermal stability.     

Preparation and characterization of poly(methyl methacrylate)–lead silicate composites

Poly(methyl methacrylate)–lead silicate composites were prepared with different amounts of crystalline or amorphous PbO–SiO₂ binary composition (70 mole % PbO). The polymerization reaction was carried out in aqueous medium and in methanol–water mixture at 40°C using sodium bisulfite as initiator. The presence of lead silicate was found to increase the molecular weight of the poly(methyl methacrylate). The prepared composites were characterized by studying their shielding properties to γ radiation, mechanical hardness, dielectric constant, and thermal stability. It was found that lead silicate increases the absorbing power of the composites to γ radiation. This behavior was found to be dependent on the amount and the type of lead silicate (amorphous or crystalline). Gamma irradiation of the composites was found to cause chemical degradation of the poly(methyl methacrylate) leading to a decrease in mechanical hardness. Molecular weights of the poly(methyl methacrylate) for some of the composites were determined before and after irradiation viscosimetrically. Dielectric constants for some of the composites were determined at two different temperatures. The thermal stability of the composites was studied by means of an automatic thermogravimetric analyzer.     

Behavior of cellulose grafted with poly(methyl methacrylate) and polyacrylonitrile toward some direct and reactive dyes

Viscose rayon fibers modified with polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) were dyed with some direct and reactive dyes. Exhaustion rate of the dye onto fibers was governed by the amount and nature of the polymer grafted. In general, the dye affinity for cellulose and dye exhaustion onto fibers decreased as the graft yield increased. Dye affinity for the PAN–cellulose graft copolymers was greater than that found with PMMA–cellulose graft copolymers. Except in a few cases, the tendency of cellulose graft copolymers of ca. 13% graft to accept direct dyes was more than that of the untreated cellulose, whereas the affinity of reactive dyes for cellulose graft copolymers of up to ca. 43% polymer was more than that of untreated cellulose. The dye fixation, based on the weight of cellulose component, increased as the graft yield increased. The dyeability of cellulose oxidized with ceric ammonium nitrate was also examined. Oxidation of cellulose prior to dyeing reduced the affinity of the dye for cellulose.     

Preparation and characterization of poly(methyl methacrylate) grafted sago starch using potassium persulfate as redox initiator

In this article, the graft copolymerization of methyl methacrylate (MMA) onto sago starch (AGU) was carried out in aqueous medium using potassium persulfate (PPS) under nitrogen gas atmosphere. The maximum percentage of grafting achieved was 90% under optimized conditions of reaction temperature, monomer, PPS, AGU, and reaction period corresponding to 50°C, 47 mmol, 1.82 mmol, 6.17 × 10^?3 mol L^?1, and 1.5 h, respectively. The grafting of MMA onto sago starch was confirmed by the differences in infrared spectroscopy. The viscosity measurement and the average molecular weight determination were estimated using Huggin's and Mark Houwink's equations, respectively. This material may have application as a biodegradable plastic. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1891–1897, 2004     

Preparation and characterization of cellulose fiber/chitosan composites

Cellulose fiber/chitosan biodegradable rod (CF/CS rod) with layer‐by‐layer structure, good mechanical properties, and excellent X‐ray developing capability was successfully constructed via in‐situ precipitated method. As the ratio of CF to CS was 0.2/20 (wt/wt), the bending strength and bending modulus arrived at 124.1 MPa and 4.3 GPa, respectively, were significantly improved compared with pure CS rod. TGA indicated that the thermal stability of CS rod could be enhanced by mixing with CF, but fiber and matrix are partially compatible. SEM made clear that fibers were randomly dispersed in the CS matrix to connect layers of CS rod that can endure stress. FTIR spectra illuminated that small amount of Schiff base was formed due to the chemical reaction between fibers and CS matrix, which could enhance the mechanical combining stress of the interface. Thus, CF/CS rod has great potential to be used as internal fixation of bone fracture. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

表面引发原子转移自由基聚合制备甲基丙烯酸甲酯接枝废胶粉及其表征

采用原子转移自由基聚合法研究了废胶粉(GTR)的表面化学接枝改性,包括2-溴异丁酰溴(BIBB)与GTR表面羟基的反应,以及形成的大分子引发剂引发甲基丙烯酸甲酯(MMA)的接枝聚合反应;用红外光谱和X射线光电子能谱仪、热重分析和扫描电子显微镜对接枝改性反应前后的GTR表面进行了表征.结果表明,GTR表面含有一定量羟基,...     

Preparation and characterization of poly(methyl methacrylate) beads

The phase behavior of Poly(ethylene terephthalate)/Poly(ethylene‐2,6‐naphthalate)/Poly(ethylene terephthalate‐co‐ethylene‐2,6‐naphthalate) (PET/PEN/P(ET‐co‐EN)) ternary blends in molten state was evaluated from differential scanning calorimetry (DSC) and NMR results as well as optical microscopic observations. Copolymer of ethylene terephthalate and ethylene‐2,6‐naphthalate was prepared by a condensation polymerization, which was a random copolymer with an intrinsic viscosity (IV) of 0.3 dL/g. The phase diagram of the ternary blends revealed that the miscibility of ternary blends in molten state was dependent on the fraction of P(ET‐co‐EN) in the blends and holding time of the blends at high temperatures above 280°C. With increase in the holding time, the fraction of copolymer in the blends necessary to induce the immiscible to miscible transition decreased. For the blends with longer holding time at 280°C, the phase diagram in molten state was irreversible against the temperature, although a reversibility was found for the blends with short holding time of 1 min at 280°C. The irreversibility of phase behavior was not explained simply by the increase of copolymer content produced during heat treatment. Complex irreversible physical and chemical interactions between components and change of phase structure of the blend in the molten state might influence on the irreversibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of highly syndiotactic block copolymers of methyl methacrylate and lauryl methacrylate and their characterization

Summary Highly syndiotactic diblock and triblock copolymers comprising lauryl methacrylate (LMA) and methyl methacrylate (MMA) with narrow molecular weight distributions were prepared by the living anionic polymerization with t-C₄H₉Li/(C₂H₅)₃Al in toluene at low temperature. The block copolymers were soluble in acetone which is a non-solvent for poly(lauryl methacrylate) (PLMA). ¹HNMR and vapor pressure osmometric analyses of the block copolymers indicated the aggregation of the copolymer in acetone through the interaction between PLMA blocks. Stereocomplex formation between the triblock copolymer and isotactic poly(methyl methacrylate) (PMMA) took place more effectively in solution than in the solid state.     

Synthesis and characterization of poly(methyl methacrylate)‐grafted silica microparticles

A procedure to synthesize poly(methyl methacrylate)‐grafted silica microparticles was developed by using radical photopolymerization of methyl methacrylate (MMA) initiated from N,N‐diethyldithiocarbamate (DEDT) groups previously bound to the silica surface (grafting “from”). The functionalization of silica microparticles with DEDT groups was performed in two steps: introduction of chlorinated functions onto the surface of silica particles, and then nucleophilic substitution of chlorines by DEDT functions via a S_N2 mechanism. The study was performed with a Kieselgel® S silica which was initially chlorinated in surface, either by direct chlorination of silanols with thionyl chloride, or by using a condensation reaction between silanols and a chlorofunctional trialkoxysilane reagent, 4‐(chloromethyl)phenyltrimethoxysilane and chloromethyltriethoxysilane, respectively. Three types of DEDT‐functionalized silica microparticles were prepared with a good control of the reactions, and then characterized by solid‐state ¹³C and ²⁹Si CP/MAS NMR. Their ability to initiate MMA photopolymerization was studied. The kinetics of MMA photopolymerization was followed by HPLC and ¹H‐NMR. Whatever the silica used the grafting progresses very slowly. On the other hand, the conversion of MMA in PMMA grafts is depending on the structure of the DEDT‐functionalized Kieselgel® S used. Poly(methyl methacrylate)‐grafted silica microparticles bearing high length grafts ( about 100) were synthesized. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of bamboo fiber‐graft‐lauryl methacrylate and its composites with polypropylene

In this study, lauryl methacrylate grafted onto bamboo fibers (BF‐g‐LM) was prepared to improve the interfacial compatibility between hydrophilic bamboo fibers (BFs) and hydrophobic plastic. The lauryl methacrylate (LM) was initiated by benzoxyl peroxide (BPO) and grafted onto BFs via a free‐radical chain‐transfer reaction. LM was grafted onto BFs with ether bonds, and differential scanning calorimetry indicated that the ether pyrolysis of BF‐g‐LM occurred at 280°C. The optimum preparation conditions were obtained as follows: 0.30 g of pretreated bamboo flour was immersed in 0.225 mol/L LM. The reaction was then initiated by 0.025 mol/L BPO, and this reaction was sustained for 4 h at 80°C. BF‐g‐LM served as coupling agent between the BFs and the polypropylene (PP) matrix, as shown by scanning electron microscopy analysis. The elongation at break of the BF/PP composites with BF‐g‐LM increased to two times compared to that of the BF/PP composites without BF‐g‐LM. The impact strength and maximum deflection also increased to 75 and 580%, respectively. In conclusion, BF‐g‐LM is a promising coupling agent that can be used in BF‐reinforced thermoplastic composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2377–2382, 2013     

Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Mechanical and thermal properties of glycidyl methacrylate grafted cotton cellulose

UV-radiation-induced graft-copolymerization of cotton cellulose was carried out with glycidyl methacrylate (GMA) using ceric ammonium nitrate (CAN) as a photoinitiator as well as a chemical initiator. With increase in the graft add-on, breaking load and moisture regain of cotton decreased, so also its thermal stability. The fiber surface changes due to grafting were ascertained by X-ray diffraction and scanning electron microscopy. © 1995 John Wiley & Sons, Inc.     

Alkaline hydrolysis of methyl acrylate grafted cellulose fibers

In this work, methyl acrylate grafted cellulose fibers were hydrolyzed in an aqueous NaOH solution to obtain a superabsorbent hydrogel. The effect of process variables, such as the hydrolysis reaction time, temperature, and NaOH concentration, during alkaline hydrolysis were carefully determined and optimized. The degree of hydrolysis was estimated on the basis of the determination of the carboxylate group contents. The material loss during hydrolysis followed a first‐order reaction mechanism. The differences in the behavior of the grafted fibers during hydrolysis could be explained by their structural differences. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dyeing properties of Bombyx mori silks grafted with methyl methacrylate and methacrylamide

To improve their dyeing and colorfastness properties, degummed Bombyx mori silks were chemically modified by a grafting technique with either methyl methacrylate (MMA) monomer or methacrylamide (MAA) monomer. Both commercial synthetic dyes, that is, acid and basic dyes, and natural dyes extracted from turmeric, without and with potassium aluminum sulfate mordant, were used in this study. Percentage dye uptake increased with the presence of poly(methyl methacrylate) or polymethacrylamide in the silk fibroin structure regardless of the types of the dyestuffs. Furthermore, compared to the degummed silk, the colorfastness to washing of the MMA‐grafted and MAA‐grafted silks dyed with acid, basic, and curcumin dyestuffs were greatly improved. Colorfastness to both acid and basic perspirations with acid and basic dyestuffs was slightly improved, whereas perspiration fastness remained unchanged for curcumin dyeing without and with the presence of the mordant. Also, the low‐light resistances of the degummed and grafted silks dyed by curcumin dyestuff were notably improved by the MMA and MAA grafting technique. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:1169–1175, 2006     

Preparation,characterization, and thermal properties of poly (methyl methacrylate)/boron nitride composites by bulk polymerization

Poly (methyl methacrylate)/boron nitride (PMMA/BN) composites were prepared by dispersing BN particles into methyl methacrylate monomer phase by bulk polymerization method. BN particles modified with silane coupling agent, γ‐methacryloxypropyl trimethoxy silane, were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. Effects of modified BN particle content on thermal conductivity were investigated, and the experimental values were compared with those of theoretical and empirical models. With 16 wt% of BN particles, the thermal conductivity of the composite was 0.53 W/(m·K), 1.8 times higher than that of pure PMMA. The microstructures of the PMMA/BN composites were examined by scanning electron microscopy, energy‐dispersive X‐ray analysis, and transmission electron microscopy. Dynamic mechanical analysis and thermogravimetric analysis traces also corroborated the confinement of the polymer in an inorganic layer by exhibiting an increase in glass‐transition temperatures and weight loss temperatures in the thermogram. Mechanical properties and electrical insulation property of the PMMA/BN composites were also determined. These results showed that PMMA/BN composites may offer new technology and business opportunities. POLYM. COMPOS., 36:1675–1684, 2015. © 2014 Society of Plastics Engineers     

Mechanical and thermal behavior of cotton cellulose grafted with hydroxyethyl methacrylate using photoinitiation

The textile properties of tensile strength and thermal decomposition of cotton cellulose grafted by photoinitiation technique using 2-hydroxyethyl methacrylate monomer were studied. The photoinitiators, namely, uranyl nitrate (UN) and ceric ammonium nitrate (CAN), were used during grafting of unswollen and swollen cotton samples. The tensile strength decreased with increase in graft add-on, whereas, the thermal stability was imparted to the grafted cotton according to the level of graft add-on.     

Preparation and characterization of poly(methyl methacrylate)/reactive montmorillonite nanocomposites

The poly(methyl methacrylate) (PMMA)/reactive montmorillonite nanocomposites were prepared by emulsion polymerization. The double bonds were introduced to both the surfaces and interlayers of the montmorillonites to obtain the reactive montmorillonites. The structure of the nanocomposites measured by wide angle X‐ray diffraction (WAXD) indicated that the montmorillonites were exfoliated. The average molecular weight of the nanocomposites revealed by gel permeation chromatography (GPC) was larger than that of pure PMMA. The results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) indicated that the thermal properties of the nanocomposites were enhanced and could be affected by the amount of the reactive montmorillonites. In addition, the tensile properties of the nanocomposites measured by an Instron testing machine improved and the nanocomposites including 3 wt% reactive montmorillonites showed the best tensile strength. The Young's modulus increased with the addition of the reactive montmorillonites. The aging properties of the nanocomposites had an improvement compared with pure PMMA. The optical properties assessed by UV‐Visible spectroscopy revealed that the transmittance decreased as the amount of the reactive montmorillonites increased. Finally, the mechanism to prepare PMMA/reactive montmorillonite nanocomposites was proposed. POLYM. COMPOS., 37:2396–2403, 2016. © 2015 Society of Plastics Engineers