Preparation and properties of organo‐soluble polyimides based on 4,4′‐diamino‐3,3‐dimethyldiphenylmethane and conventional dianhydrides

4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999     

Chemical modification of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride polyimides by a catechol‐derived bis(ether amine)

Having previously demonstrated that the polyimide derived from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 1,2‐bis(4‐aminophenoxy)benzene [termed triphenyl ether catechol diamine (TPEC)] exhibited superior tensile properties in addition to good thermal properties, we now provide a preliminary assessment of the properties of the copolyimides prepared from BPDA, TPEC, and another aromatic diamine. The homopolyimides derived from BPDA and many aromatic diamines generally possessed good mechanical properties and thermal properties; however, they were insoluble in available organic solvents. In several cases, organosoluble BPDA copolyimides could be prepared from BPDA and equimolar mixtures of TPEC and another aromatic diamine. All the copolyimides could be formed into tough films with high moduli and strengths and, in most cases, high extensions to break. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 351–358, 2002; DOI 10.1002/app.10342     

Preparation and properties of novel fluorinated polyimides based on 2,2′,6,6′-tetrafluorobenzidine

Fluorinated polyimides were prepared from 2,2′,6,6′-tetrafluorobenzidine and four conventional dianhydride monomers by a solution polycondensation reaction followed by a chemical imidization. Polyimide based on 2,2′,6,6′-tetrafluorobenzidine and hexafluoroisopropylidene bis(3,4-phthalic anhydride) (6FDA) is soluble in organic solvents such as NMP, DMA, DMF, THF, chloroform, and acetone while those based on 2,2′,6,6′-tetrafluorobenzidine and pyromellitic dianhydride (PMDA), benzophenone-3,3′,4,4′-tetracarboxylic acid dianhydride (BTDA), diphenylether-3,3′,4,4′-tetracarboxylic acid dianhydride (ETDA) are not. Polyimide from 2,2′,6,6′-tetrafluorobenzidine and 6FDA possesses high optical transparency at 350–700 nm and has a in-plane refractive index of 1.558 at 632.8 nm. All polyimides exhibit glass transition temperatures above 350°C. They also possess very high thermal stability. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 1605–1609, 1998     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Insensitive High Explosives II: 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF)

This paper reviews the synthesis, properties, performance, and safety of the insensitive explosive 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF, C₄H₄N₈O₃), CAS‐No. [78644‐89‐0], and 18 formulations based on it. Though having a moderate crystal density only, DAAF offers high positive heat of formation and hence superior performance when compared with TATB. It is friction and impact insensitive but is more sensitive to shock than TATB and has an exceptionally small critical diameter and performs very well at low temperatures unlike other insensitive explosives. 39 references to the public domain are given. For Part I see Ref. [1].     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Investigation of the Solubility of 3,4‐Diaminofurazan (DAF) and 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF) at Temperatures Between 293.15 K and 313.15 K

The solubilities of 3,4‐diaminofurazan (DAF) and 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF) were investigated in water, dichloromethane, acetonitrile, ethyl acetate, methanol, and acetone between 293.15 K and 313.15 K. The solubility was determined by high‐pressure liquid chromatography with ultraviolet detection. The solubilities of DAF and DAAF are increased with the increasing of temperature in all solvents studied. The enthalpy of solution in each solvent was calculated according to van't Hoff Equation.     

A solid-state NMR study of aromatic polyimides based on 4,4′-diaminotriphenylmethane

The effect of different synthesis routes on the chemical and molecular order of polyimides based on 4,4′-diaminotripenylmethane (DA-TPM) and various aromatic dianhydrides (PI-TPM) was studied by solid-state carbon-13 nuclear magnetic resonance (¹³C-NMR). Polyimides were prepared by three different methods including a two-step procedure with either thermal or chemical imidization of precursor poly(amic acid)s (PAA) and one-step high-temperature polycondensation in phenolic solvents. Model compounds were also obtained and used in the assignment of the NMR signals. The NMR spectra for PI-TPMs obtained by one-step high-temperature polycondensation and—to a lesser extent—by thermal imidization of PAA, show sharper lines than those observed in the spectra of polymers prepared from PAA via chemical imidization. These differences are due mainly to the lower degree of ordering of the latter polyimides. WAXD patterns of polyimide films also indicated a less-ordered structure of the polymers resulting from the chemical imidization of PAA. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1053–1064, 1998     

Synthesis and properties of new aromatic polyimides based on 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride

New polyimides with enhanced thermal stability and high solubility were synthesized in common organic solvents from a new dianhydride, 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride (DBBTDA). DBBTDA was used as monomer to synthesize polyimides by using various aromatic diamines. The polymers were characterized by IR and NMR spectroscopy and elemental analysis. These polyimides had good inherent viscosities in N‐methyl‐2‐pyrrolidinone (NMP) and also high solubility and excellent thermo‐oxidative stability, with 5 % weight loss in the range 433 to 597 °C. Copyright © 2004 Society of Chemical Industry     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

The pyrolysis behaviors of polyimide foam derived from 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride/4,4′‐oxydianiline

The thermal stability and pyrolysis behaviors of polyimide (PI) foam derived from 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA)/4,4′‐oxydianiline (4,4′‐ODA) in air and in nitrogen were studied. The decomposition products of PI foam were analyzed by thermogravimetry‐Fourier transform infrared spectroscopy (TG‐FTIR). Several integral and differential methods reported in the literatures were used in decomposition kinetics analysis of PI foam. The results indicated that the PI foam was easier to decompose in air than in nitrogen, with ～ 55% residue remaining in nitrogen versus zero in air at 800^oC. The main pyrolysis products were CO₂, CO, and H₂O in air and CO₂, CO, H₂O, and small organic molecules in nitrogen. The different dynamic methods gave similar results that the apparent activation energies, pre‐exponential factors, and reaction orders were higher in nitrogen than those in air. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The use of 3,3′,4′,5‐tetrachlorosalicylanilide as a chemical uncoupler to reduce activated sludge yield

To determine whether chemical additions can be used to reduce sludge production in biological wastewater treatment, 3,3′,4′,5‐tetrachlorosalicylanilide (TCS) was added to activated sludge cultures as a metabolic uncoupler. Batch tests confirmed that TCS is an effective chemical uncoupler in reducing the sludge yield at concentrations greater than 1.0 mg dm^?3; a TCS concentration of 1.0 mg dm^?3 reduced sludge yield by approximately 50%. Substrate removal capability and effluent nitrogen concentration were not affected adversely by the presence of TCS when dosed every other day in a range of 2.0–3.6 mg dm^?3 during the 40‐day operation of activated sludge batch cultures. Such sludge growth reduction was associated with the enhancement of microbial activities in terms of the specific oxygen uptake rate and dehydrogenase activity. Sludge settleability of the treated and control samples was qualitatively comparable and not significantly different. Filamentous bacteria continued to grow in sludge flocs only in the control reactor at the end of the 40‐day trial. These results suggest that TCS treatment of activated sludge systems may reduce excess sludge yield. Copyright © 2003 Society of Chemical Industry     

Copolycondensation of IPA/TPA,BPA, and 4,4′‐dihydroxydipehnylsulfone and 4,4′‐dicarboxydiphenylsulfone

Copolycondensations of IPA, TPA, bisphenol A (BPA), and several cimonomers were carried out to improve thermal properties, such as, the glass transition temperature (T_g) of the IPA/TPA (50/50)–BPA polyester. Among the comonomers examined, 4,4′‐Dihydroxydiphenylsulfone (BPS) and 4,4′‐Dicarboxydiphenylsulfone (DCDPS) having a strongly dipolar sulfonyl group in the chain were significantly effective. The favorable effect upon the T_gs was studied by varying the amounts of BPS and DCDPS incorporated into the copolymers. In the copolycondensation with BPS, two‐stage copolycondensation of BPA first and then BPS, the reverse order of reaction, and their spontaneous addition were examined to investigate the effect of distribution of the BPS unit segments in the copolymer upon the T_gs of the resulted copolymers. The distribution was briefly studied from distribution of the IPA/TPA‐BPA oligomers in the initial reaction using GPC. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 875–879, 2000     

Preparation and properties of flame-retardant polyphosphate esters: Low-temperature solution polycondensation of 3,3,′5,5′-tetrabromobisphenol AF and aryl phosphorodichloridates

This article describes the syntheses of aromatic polyphosphates from the reaction of various aryl phosphorodichloridates with 3,3′,5,5′-tetrabromobisphenol AF (TBPAF) in a chlorinated hydrocarbon solvent under low-temperature conditions. The new polyphosphates obtained were characterized by infrared, ¹³C and ³¹P nuclear magnetic resonance spectra, elemental analysis, inherent viscosity, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, limiting oxygen index, contact angle, and molar mass measurement. All of the polyphosphates obtained had high yields, and the inherent viscosities were in the range 0.12 - 0.15 dL g⁻¹. All of the polymers start degrading between 210 and 267°C and had 14 - 26% residual mass at 700°C in nitrogen. Polymer E, having a methoxy group in the side chain phenyl ring, showed better thermal stability than the other polymers. The X-ray diffraction patterns revealed that all of the polyphosphates were amorphous. These polyphosphates had glass transition temperatures between 140 and 154°C. Polymers obtained from TBPAF had excellent flame retardency, as indicated by high limiting oxygen index values in the range of 63 - 68. The water contact angles (θ_w) of all of the polyphosphates were in the range of 74 - 87°. The contact angles of polymers A and B were larger than those of other polyphosphates that contain more oxygen (polymers C and E) or bromine atoms (polymer D). © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 59–65, 1997     

Comprehensive utilization of acidic wastewater from 3,3′‐dichlorobenzidine hydrochloride manufacture

In the commercial manufacture of 3,3′‐dichlorobenzidine hydrochloride, substantial quantities of acidic industrial effluents were generated. A combination of ultrafiltration and evaporation processes was investigated for the recovery of products and dilute hydrochloric acid. In a novel purification method, waste sulfuric acid is purified and reused four or five times in the hydrazobenzene–benzidine transformation step, resulting in a 75% reduction in the consumption of sulfuric acid, minimization of wastewater discharge and environmental hazards risk and significant economic, environmental and social benefits. © 2001 Society of Chemical Industry     

长链聚酰亚胺的制备与表征

以长链二胺4,4' 二(4 氨基苯氧基)二苯砜(BAPS)为单体,采用两步法分别与二酐PMDA、ODPA、BPADA合成了3种链长的聚酰亚胺。实验利用GPC监测0 05mol/L聚酰胺酸(PAA)的数均聚合度(Xn)及相对分子质量分布随缩聚时间的变化关系,结果表明该反应为一逐步缩聚反应,缩聚速率随二酐电子亲和性(EA)的递增而增加;与预聚体聚酰胺酸相比,热处理环化得到聚酰亚胺其数均分子质量( Mn)和特性粘度[η]均有所下降,而分布指数(D)增大。此外还利用红外光谱(FTIR)、差分扫描量热法(DSC)、热重分析(TGA)等对聚酰亚胺进行了表征,结果表明聚酰亚胺(PI)的玻璃化温度(tg)和热分解温度(td)随着聚合单元长度的增加而降低。     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Ditopic, flexible hydrazone-based building blocks with pendant 2,2′:6′,2′′-terpyridine metal-binding domains

The synthesis and characterization of three new bis(2,2′:6′,2′-terpyridine) (tpy) ligands containing different hydrazone spacers between the metal-binding domains are described. Treatment of 1,4-benzenedicarbaldehyde bis(2,2′:6′,2′′-terpyridin-4′-ylhydrazone) (1) with [(tpy)RuCl₃] in the presence of N-ethylmorpholine results in the formation of [(tpy)Ru(μ-1)Ru(tpy)]⁴⁺. Single crystal X-ray diffraction data for [(tpy)Ru(μ-1)Ru(tpy)][PF₆]₄·8MeCN confirm the ability of the hydrazone-based ligand to bridge two ruthenium(II) centres, providing proof-of-principle for the application of this class of flexible ligand in the design of coordination polymers.     

A novel stair-like lithium coordination polymer constructed from 4,4′-bipyridine

A novel stair-like lithium coordination polymer Li₂(4,4′-bpy)₂(NO₃)₂, 1, has been synthesized by using standard Schlenk techniques. X-ray diffraction shows the 2D stair-like framework contains an approximately perpendicular 1D “Z” type Li-4,4′-bpy chain and an unprecedented Li–NO₃ chain.     

3,3′‐Diindolylmethane imprinted polymers: synthesis,characterization and analytical procedure for template isolation from biological matrix

A novel sorbent for the separation of 3,3′‐diindolylmethane (DIM) has been developed. DIM was used as a template molecule to prepare twelve imprinted polymers from seven different functional monomers in six various porogens in the presence of ethylene glycol dimethacrylate as a crosslinker. The binding capacity showed that the highest binding specificity was achieved when allylamine as the monomer and carbon tetrachloride as the porogen were used to form bulk polymers. Binding capacities were 130.4 ± 2.8 µg g^?1 for imprinted MIP7_a polymer versus 49.03 ± 0.44 µg g^?1 for non‐imprinted NIP7_a polymer. An imprinting factor of 3.12 reflected the high specificity of MIP7_a. A solid‐phase extraction protocol was fully optimized. Two methanol–water systems were selected as the most effective for loading and washing steps, while acetonitrile was chosen as the most efficient eluent suitable for recovery of 91.7 ± 3.8% of DIM. Optimal concentration of DIM and volume of loaded sample were also examined. A loaded volume of 2.5 mL was the most appropriate for 0.625 and 1.25 mg L^?1. The use of MIP7_a for the separations of DIM from spiked bovine serum albumin was evaluated, showing a total recovery of 87.7 ± 3.5%. The commercial sorbent C18 was not suitable for such an application. © 2013 Society of Chemical Industry