基于鲁棒滑模观测器的两关节柔性机械手控制

柔性机械手系统为非最小相位系统, 当控制有界时, 该特性阻碍其端点位移渐近跟踪期望轨迹. 本文首先重新定义柔性机械手系统的输出, 通过输入输出线性化, 将系统分解为输入输出子系统和零动态子系统; 然后提出一种用于观测柔性模态导数的鲁棒滑模观测器, 使状态估计达到预期的指标, 解决了柔性模态导数难以获得的问题; 设计积分滑模控制策略, 使输入输出子系统在有限时间收敛到零; 选择适当的控制器参数, 使零动态子系统在 平衡点附近渐近稳定, 从而保证整个系统的渐近稳定. 本文提出的方法设计过程简单, 易于实现. 仿真结果证明了设计的有效性.     

考虑柔性关节的机械臂自适应运动控制策略研究

具有柔性关节的轻型机械臂因其自重轻、响应迅速、操作灵活等优点,取得了广泛应用;针对具有柔性关节的机械臂系统的关节空间轨迹跟踪控制系统动力学参数不精确的问题,提出一种结合滑模变结构设计的自适应控制器算法;通过自适应控制的思想对系统动力学参数进行在线辨识,并采用Lyapunov方法证明了闭环系统的稳定性;仿真结果表明,该控制策略保证了机械臂系统对期望轨迹的快速跟踪,具有良好的跟踪精度,系统具有稳定性。     

SLIDING-MODE ADAPTIVE CONTROL FOR FLEXIBLE-LINK MANIPULATORS USING A COMPOSITE DESIGN

ABSTRACT

A robust adaptive control scheme for flexible link robotic manipulators is presented. The design is based on considering the flexible mechanical structure as a singular perturbed system, which allows us to assume the existence of slow (rigid) and fast (flexible) modes that separately can be controlled. The rigid dynamics are controlled by means of a robust sliding adaptive approach with well-established stability properties. The flexible dynamics can be controlled using H _∞ or optimal designs, which successfully handle the actual interaction between the slow and fast subsystems. This composite approach achieves good closed-loop tracking properties, both in simulation and experimental results on a laboratory-flexible arm.     

Stability analysis and robust composite controller synthesis for flexible joint robots

In this paper the control of flexible joint manipulators is studied in detail. The model of N-axis flexible joint manipulators is derived and reformulated in the form of singular perturbation theory and an integral manifold is used to separate fast dynamics from slow dynamics. A composite control algorithm is proposed for the flexible joint robots, which consists of two main parts. Fast control, u _f, guarantees that the fast dynamics remains asymptotically stable and the corresponding integral manifold remains invariant. Slow control, u _s, consists of a robust PID designed based on the rigid model and a corrective term designed based on the reduced flexible model. The stability of the fast dynamics and robust stability of the PID scheme are analyzed separately, and finally, the closed-loop system is proved to be uniformly ultimately bounded (UUB) stable by Lyapunov stability analysis. Finally, the effectiveness of the proposed control law is verified through simulations. The simulation results of single- and two-link flexible joint manipulators are compared with the literature. It is shown that the proposed control law ensures robust stability and performance despite the modeling uncertainties.     

A composite adaptive control with flexible quantity feedback for flexible-link manipulators

This article presents a mixture of joint subsystem-based adaptive control and simple flexible quantity feedback for flexible-link manipulators. The complex full flexible-arm system is composed of two severely coupling subsystems called the joint subsystem and flexible subsystem. Linear parametrization is first used to design an adaptive law for identifying the unknown parameters of a flexible manipulator based only on the joint subsystem. Joint-angle trajectory tracking can thus be achieved using the derived stable nonlinear adaptive control with the estimates of unknown parameters. To stabilize the flexible subsystem, we can simply add the feedback of transversal acceleration or deflection at the end point and/or along the flexible beam. The suggested approach is much simpler than those based on the full dynamics model of a flexible arm in required computations. Computer simulations on a single-link and a two-link flexible arm are tested to illustrate the validity of the strategy for both trajectory tracking and active damping. © 1996 John Wiley & Sons, Inc.     

神经网络自适应滑模控制的不确定机器人轨迹跟踪控制

提出一种针对机器人跟踪控制的神经网络自适应滑模控制策略。该控制方案将神经网络的非线性映射能力与滑模变结构和自适应控制相结合。对于机器人中不确定项,通过RBF网络分别进行自适应补偿,并通过滑模变结构控制器和自适应控制器消除逼近误差。同时基于Lyapunov理论保证机器手轨迹跟踪误差渐进收敛于零。仿真结果表明了该方法的优越性和有效性。     

Global asymptotic tracking for nonminimum‐phase nonlinear systems in output feedback form

The problem of global asymptotic tracking by output feedback is studied for a class of nonminimum‐phase nonlinear systems in output feedback form. It is proved that the problem is solvable by an n‐dimensional output feedback controller under the two conditions: (a) the nonminimum‐phase nonlinear system can be rendered minimum‐phase by a virtual output; and (b) the internal dynamics of the nonlinear system driven by a desired signal and its derivatives has a bounded solution trajectory. With the help of a new coordinate transformation, a constructive method is presented for the design of a dynamic output tracking controller. An example is given to validate the proposed output feedback tracking control scheme.     

Asymptotic regulation for distributed parameter systems via zero dynamics inverse design

In this paper, we introduce a new approach, zero dynamics inverse (ZDI) design, for designing a feedback compensation scheme achieving asymptotic regulation for a linear or nonlinear distributed parameter system in the case when the value w(t) at time t of the signal w to be tracked or rejected is a measured variable. Following the nonequilibrium formulation of output regulation, we formulate the problem of asymptotic regulation by requiring zero steady‐state error together with ultimate boundedness of the state of the system and the controller(s), with a bound determined by bounds on the norms of the initial data and w. Because a controller solving this problem depends only on a bound on the norm of w not on the particular choice of w, this formulation is in sharp contrast to both exact tracking, asymptotic tracking or dynamic inversion of a completely known trajectory and to output regulation with a known exosystem. The ZDI design consists of the interconnection, via a memoryless filter, of a stabilizing feedback compensator and a cascade controller, designed in a simple, universal way from the zero dynamics of the closed‐loop feedback system. This design philosophy is illustrated with a problem of asymptotic regulation for a boundary controlled viscous Burgers' equation, for which we prove that the ZDI is input‐to‐state stable. In infinite dimensions, however, input‐to‐state stable compactness arguments are supplanted by smoothing arguments to accommodate crucial technical details, including the global existence, uniqueness, and regularity of solutions to the interconnected systems. Copyright © 2011 John Wiley & Sons, Ltd.     

基于非回归矩阵的移动机械臂的自适应控制

针对非完整移动机械臂系统的输出跟踪问题,在系统的惯性参数及未建模动态未知的情况下,根据动力学方程的性质,为其设计了基于非回归矩阵的自适应控制律。将其用于一类非完整移动机械臂的输出跟踪控制,仿真结果验证了所提出控制方法的正确有效性。     

Adaptive decentralized finite‐time output tracking control for MIMO interconnected nonlinear systems with output constraints and actuator faults

In this work, we present a novel adaptive decentralized finite‐time fault‐tolerant control algorithm for a class of multi‐input–multi‐output interconnected nonlinear systems with output constraint requirements for each vertex. The actuator for each system can be subject to unknown multiplicative and additive faults. Parametric system uncertainties that model the system dynamics for each vertex can be effectively dealt with by the proposed control scheme. The control input gain functions of the nonlinear systems can be not fully known and state dependent. Backstepping design with a tan‐type barrier Lyapunov function and a new structure of stabilizing function is presented. We show that under the proposed control scheme, with the use of graph theory, finite‐time convergence of the system output tracking error into a small set around zero is guaranteed for each vertex, while the time‐varying constraint requirement on the system output tracking error for each vertex will not be violated during operation. An illustrative example on 2 interacting 2‐degree‐of‐freedom robot manipulators is presented in the end to further demonstrate the effectiveness of the proposed control scheme.     

Robust control of flexible manipulators via μ-synthesis

An experimental flexible arm serves as testbed to investigate the efficacy of the μ-synthesis design technique in the control of flexible manipulators. A linearized model of the testbed is derived for control design. Discrepancies and errors between the linearized model and the physical system are accounted for in the control design via uncertainty models. These uncertainties include: unmodeled high-frequency dynamics, errors in natural frequencies and damping levels and actuator and sensor errors. Colocated and noncolocated controllers are designed using μ-synthesis. It is observed, theoretically and experimentally, that the μ-synthesis design technique is a viable control tool for tip tracking with flexible manipulators.     

Predictive end-point trajectory control of elastic manipulators

This article presents an approach to end-point trajectory control of elastic manipulators based on the nonlinear predictive control theory. Although this approach is applicable to manipulators of general configuration, only planar flexible multi-link manipulators are considered. A predictive control law is derived by minimizing a quadratic function of the trajectory error of the end-points of each link, elastic modes, and control torques. This approach avoids the instability of the zero dynamics encountered in the controller design using feedback linearization and variable structure control techniques for end-point control. Furthermore, the derived predictive controller is robust to uncertainty in the system parameters. Simulation results are presented for a one-link flexible manipulator to show that in the closed-loop system accurate end-point trajectory control and vibration damping can be accomplished. © 1996 John Wiley & Sons, Inc.     

Model reference robust control of systems with significant unmodelled dynamics

In this paper, a recently proposed control design technique, model reference robust control (MRRC), is generalized to provide input–output robust control for a much wider class of SISO systems. A system under consideration may contain not only parametric uncertainties, disturbances, uncertain high-order nonlinearities associated with system output (including stable unmodelled dynamics of the output), but also multiplicative unmodelled dynamics of the input of the system. Input unmodelled dynamics may be unstable and of infinite dimension. Common assumptions such as the order of the system, or bounds on system parameters, or coefficients in size-bounding functions on uncertainties and unmodelled dynamics are not needed in this paper. The a priori information required to apply the proposed design procedure includes the relative degree of the overall system, closed-form expressions of bounding functions, and, for arbitrarily small error in tracking the output of any given reference model, the minimum phase condition. Under the proposed control, the output tracking error can be made arbitrarily small to achieve any specified tracking accuracy. The distinct feature of MRRC is that neither uncertainties nor unmodelled dynamics are required to be small. © 1997 by John Wiley & Sons, Ltd.     

Hybrid Control Scheme for Robust Tracking of Two-Link Flexible Manipulator

The hybrid control scheme is proposed to stabilize the vibration of a two-link flexible manipulator while the robustness of Variable Structure Control (VSC) developed for rigid manipulators is maintained for controlling the joint angles. The VSC law alone, which is designed to accomplish only the asymptotic decoupled joint angle trajectory tracking, does not guarantee the stability of the flexible mode dynamics of the links. In order to actively suppress the flexible link vibrations, hybrid trajectories for the VSC are generated using the virtual control force concept, so that robust tracking control of the flexible-link manipulator can also be accomplished. Simulation results confirm that the proposed hybrid control scheme can achieve more robust tracking control of two-link flexible manipulator than the conventional control scheme in the presence of payload uncertainty.     

Hybrid Control Scheme for Robust Tracking of Two-Link Flexible Manipulator

A hybrid control scheme is proposed to stabilize the vibration of a two-link flexible manipulator while robustness of Variable Structure Control (VSC) developed for rigid manipulators is maintained for controlling the joint angles. The VSC law alone, which is designed to accomplish only the asymptotic decoupled joint angle trajectory tracking, does not guarantee the stability of the flexible mode dynamics of the links. In order to actively suppress the flexible link vibrations, hybrid trajectories for the VSC are generated using the virtual control force concept, so that robust tracking control of the flexible-link manipulator can also be accomplished. Simulation results confirm that the proposed hybrid control scheme can achieve more robust tracking control of two-link flexible manipulator than the conventional control scheme in the presence of payload uncertainty.     

A multivariable MRAC scheme with application to a nonlinear aircraft model

This paper revisits the multivariable model reference adaptive control (MRAC) problem, by studying adaptive state feedback control for output tracking of multi-input multi-output (MIMO) systems. With such a control scheme, the plant-model matching conditions are much less restrictive than those for state tracking, while the controller has a simpler structure than that of an output feedback design. Such a control scheme is useful when the plant-model matching conditions for state tracking cannot be satisfied. A stable adaptive control scheme is developed based on LDS decomposition of the high-frequency gain matrix, which ensures closed-loop stability and asymptotic output tracking. A simulation study of a linearized lateral-directional dynamics model of a realistic nonlinear aircraft system model is conducted to demonstrate the scheme. This linear design based MRAC scheme is subsequently applied to a nonlinear aircraft system, and the results indicate that this linearization-based adaptive scheme can provide acceptable system performance for the nonlinear systems in a neighborhood of an operating point.     

Adaptive output rejection of unmatched input disturbances

To adaptively reject the effect of certain unmatched input disturbances on the output of a linear time-invariant system, a transfer function matching condition is needed. A lemma which presents a novel basic property of linear systems is derived to characterize system conditions for such transfer function matching. An adaptive disturbance rejection control scheme is developed for such systems with uncertain dynamics parameters and disturbance parameters. This adaptive control technique is applicable to control of systems with actuator failures whose failure values, failure time instants, and failure patterns are unknown. A solution is presented to this adaptive actuator failure compensation problem, which ensures closed-loop stability and asymptotic output tracking, in the presence of any up to m−1 uncertain failures of the total m actuators. Desired adaptive system performance is verified by simulation results.     

Learning Control of Robot Manipulators in Task Space

Two important properties of industrial tasks performed by robot manipulators, namely, periodicity (i.e., repetitive nature) of the task and the need for the task to be performed by the end‐effector, motivated this work. Not being able to utilize the robot manipulator dynamics due to uncertainties complicated the control design. In a seemingly novel departure from the existing works in the literature, the tracking problem is formulated in the task space and the control input torque is aimed to decrease the task space tracking error directly without making use of inverse kinematics at the position level. A repetitive learning controller is designed which “learns” the overall uncertainties in the robot manipulator dynamics. The stability of the closed‐loop system and asymptotic end‐effector tracking of a periodic desired trajectory are guaranteed via Lyapunov based analysis methods. Experiments performed on an in‐house developed robot manipulator are presented to illustrate the performance and viability of the proposed controller.     

A new approach to robust position/force control of flexible-joint robot manipulators

In this paper a new approach employing smooth robust compensators is proposed for the control of uncertain elastic-joint robot manipulators during contact tasks. It is assumed that the flexible-joint manipulators consist of two subsystems: the rigid subsystem and the flexible subsystem. The output of the flexible subsystem is assumed to be the input of the rigid subsystem. The control design is carried out in two steps. First, a desired input is designed for the rigid subsystem, which can robustly stabilize it. Second, a robust controller is designed to stabilize the flexible subsystem so that it generates the necessary torque designed for the rigid subsystem. By using this approach, the robot manipulator can exert a preset amount of force on the environment while tracking a desired trajectory with global asymptotic stability. Lyapunov's direct method is used here to prove the global asymptotic stability of the closed-loop system. The assumption of weak joint elasticity is relaxed and exact knowledge of joint stiffness is not required for the control design. Also, exact knowledge of robot kinematic and dynamic parameters and actuator parameters are not required. Unlike other approaches, this approach takes the environmental stick-slip friction as well as its dependency on normal contact force into consideration. It compensates for the adverse effects of the stick-slip friction. The proposed controller produces a smooth control action, and ensures smooth motion on the contact surface. The efficacy of the proposed controller is illustrated with the help of a numerical example of a two-link flexible-joint robot. © 1996 John Wiley & Sons, Inc.     

Stability and control aspects of flexible link robot manipulators during constrained motion tasks

The effect of robotic manipulator structural compliance on system stability and trajectory tracking performance and the compensation of this structural compliance has been the subject of a number of publications for the case of robotic manipulator noncontact task execution. The subject of this article is the examination of dynamics and stability issues of a robotic manipulator modeled with link structural flexibility during execution of a task that requires the robot tip to contact fixed rigid objects in the work environment. The dynamic behavior of a general n degree of freedom flexible link manipulator is investigated with a previously proposed nonlinear computed torque constrained motion control applied, computed based on the rigid link equations of motion. Through the use of techniques from the theory of singular perturbations, the analysis of the system stability is investigated by examining the stability of the “slow” and “fast” subsystem dynamics. The conditions under which the fast subsystem dynamics exhibit a stable response are examined. It is shown that if certain conditions are satisfied a control based on only the rigid link equations of motion will lead to asymptotic trajectory tracking of the desired generalized position and force trajectories during constrained motion. Experiments reported here have been carried out to investigate the performance of the nonlinear computed torque control law during constrained motion of the manipulator. While based only on the rigid link equations of motion, experimental results confirm that high-frequency structural link modes, exhibited in the response of the robot, are asymptotically stable and do not destabilize the slow subsystem dynamics, leading to asymptotic trajectory tracking of the overall system. © 1992 John Wiley & Sons, Inc.