Albumin adsorption from aqueous solutions and human plasma in a packed-bed column with Cibacron Blue F3GA-Zn(II) attached poly(EGDMA-HEMA) microbeads

Affinity dye-ligand Cibacron Blue F3GA, was covalently coupled with poly(EGDMA-HEMA) microbeads via nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA under alkaline conditions. The microbeads carrying 16.5 μmol Cibacron Blue F3GA per gram polymer was incorporated with Zn(II) ions. Zn(II) loading was 189.6 μmol/g. Cibacron Blue F3GA-Zn(II) attached affinity sorbent was used for albumin adsorption from aqueous solutions and human plasma in a packed-bed column. BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase also effected adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau which was about 128 mg BSA/g. The maximum adsorption was observed at pH 5.0 which is the isoelectric pH of BSA. Higher human serum albumin adsorption was observed from human plasma (215 mg HSA/g). High desorption ratios (over 90% of the adsorbed albumin) were achieved by using 1.0 M NaSCN (pH 8.0) in 30 min.     

Packed-bed columns with dye-affinity microbeads for removal of heavy metal ions from aquatic systems

A dye ligand Cibacron Blue F3GA, was covalently coupled with polyhydroxyethylmethacrylate (PHEMA) microbeads in the 150–200 μm particle size range. The sorbent carrying 22.3 μmol Cibacron Blue F3GA per gram of polymer was then used to remove Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions in a packed-bed column system. Heavy metal ion adsorption capacity of the column was investigated as a function of heavy metal ion-bearing solution flow rate and the inlet heavy metal ion concentration. The maximum metal ion uptake values found were: 80.60, 96.98, 78.36, 103.98 μmol/g polymer for Pb(II), Cd(II), Cu(II) and Zn(II), respectively. The heavy metal adsorption capacity of the microbeads decreased with an increase in the circulation rate of aqueous solution. The order of affinity based on molar uptake was Zn(II)>Cd(II)>Pb(II)>Cu(II). Removal percentages of heavy metals related to flow time were determined for different flow rates and initial metal ion concentrations. It was observed that PHEMA microbeads carrying Cibacron Blue F3GA can be regenerated by washing with a solution of nitric acid (0.05 M). The desorption ratio was as high as 98.5%.     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads have been studied. Poly(EGDMA‐HEMA) microbeads were prepared by suspension copolymerization of ethylene glycol dimethacrylate (EGDMA) and hydroxy‐ethyl methacrylate (HEMA) by using poly(vinyl alcohol), benzoyl peroxide, and toluene as the stabilizer, the initiator, and the pore‐former, respectively. Cibacron Blue F3GA was covalently attached to the microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA, under alkaline conditions. Microbeads (150–200 μm in diameter) with a swelling ratio of 55%, and carrying 16.5 μmol Cibacron Blue F3GA/g polymer were used in the adsorption/desorption studies. Adsorption capacity of the microbeads for the selected metal ions, i.e., Cu(II), Zn(II), Cd(II), Fe(III), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–200 ppm) and at different pH values (2.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐derived microbeads were 0.19 mmol/g for Cu(II), 0.34 mmol/g for Zn(II), 0.40 mmol/g for Cd(II), 0.91 mmol/g for Fe(III), and 1.05 mmol/g for Pb(II). Desorption of metal ions were studied by using 0.1 M HNO₃. High desorption ratios (up to 97%) were observed in all cases. Repeated adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1397–1403, 1999     

Dye‐ligand column chromatography: Albumin adsorption from aqueous media and human plasma with dye‐affinity microbeads

Cibacron Blue F3GA was covalently coupled with poly(ethylene glycol‐dimethacrylate‐2‐hydroxyethylmethacrylate) [poly(EGDMA‐HEMA)] microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecules under alkaline conditions. The affinity sorbent carrying 16.5 μmol Cibacron Blue F3GA/g polymer was then used for bovine serum albumin (BSA) adsorption from aqueous protein solutions and from human plasma in a packed‐bed column. The BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase was also effective on adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau that was about 57.3 mg BSA/g. Higher BSA adsorption was observed at lower ionic strength. The maximum adsorption was observed at pH 5.0, which is the isoelectric pH of BSA. Higher human serum albumin adsorption was achieved from human plasma (109.6 mg HSA/g). High desorption ratios (over 94% of the adsorbed albumin) were achieved by using 1.0M NaSCN (pH 8.0) in 30 min. It was observed that albumin could be repeatedly adsorbed and desorbed without a significant loss in adsorption capacity. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2803–2810, 1999     

Preparation of cibacron blue F3GA‐attached polyamide hollow fibers for heavy metal removal

Dye‐affinity adsorption has been used increasingly for heavy metal removal. Synthetic hollow fibers have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The goal of this study was to investigate in detail the performance of hollow fibers composed of modified polyamide to which Cibacron Blue F3GA was attached for the removal of heavy metal ions. The Cibacron Blue F3GA loading was 1.2 mmol/g. The internal matrix was characterized by scanning electron microscopy. No significant changes in the hollow fiber cross‐section or outer layer morphology were observed after dye modification. The effect of the initial concentration of heavy metal ions and medium pH on the adsorption efficiency were studied in a batch reactor. The adsorption capacity of the hollow fibers for the selected metal ions [i.e., Cu(II), Zn(II) and Ni(II)] were investigated in aqueous media with different amounts of these ions (10–400 ppm) and at different pH values (3.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐attached hollow fibers were 246.2 mg/g for Cu(II), 133.6 mg/g for Zn(II), and 332.7 mg/g for Ni(II). Furthermore, a Langmuir expression was calculated to extend the adsorption equilibrium. Nitric acid (0.1M) was chosen as the desorption solution. High desorption ratios (up to 97%) were observed in all cases. Consecutive adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3089–3098, 2002; DOI 10.1002/app.2338     

Congo red- and Zn(II)-derivatized monosize poly(MMA-HEMA) microspheres as specific sorbent in metal chelate affinity of albumin

Monosize poly(methylmethacrylate-hydroxyethylmethacrylate) [poly(MMA-HEMA)] microspheres (4 μm in diameter) were produced by dispersion copolymerization of MMA and HEMA in an ethanol-water medium. Congo Red was attached to the poly(MMA-HEMA) microspheres, covalently. These Congo Red-derivatized microspheres were characterized by optical microscopy, Fourier transform infrared spectroscopy, and elemental analysis. Then, Zn(II) ions were incorporated by chelating with the immobilized Congo Red molecules. Different amounts of Zn(II) ions [1.2–17.6 mg of Zn(II)/g of polymer] were conjugated on the microspheres by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these microspheres from aqueous solutions containing different amounts of BSA at different pH and ionic strengths was investigated in batch reactors. The nonspecific BSA adsorption on the plain poly(MMA-HEMA) microspheres was very low (0.7 mg of BSA/g of polymer). Congo Red derivatization significantly increased the BSA adsorption (up to 35.8 mg of BSA/g of polymer). A further increase in the adsorption capacity (up to 61.0 mg of BSA/g of polymer) was observed when Zn(II) ions were incorporated. More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0. © 1997 John Wiley & Sons, Inc.     

Human serum albumin (HSA) adsorption with chitosan microspheres

In this study, chitosan microspheres were prepared and characterized for adsorption of human serum albumin (HSA) as affinity sorbent. The chitosan microspheres were obtained with a “suspension crosslinking technique” in the size range of 30–700 μm by using a crosslinker, i.e., glutaraldehyde. The chitosan microspheres used in HSA adsorption studies were having the average size of 170 ± 81 μm. Adsorption medium pH and the initial HSA concentration in the adsorption medium were changed as 4.0–7.0 and 0.5–2.0 mg HSA/mL, respectively, to investigate the HSA adsorption capacity of chitosan microspheres. Maximum HSA adsorption (i.e., 11.35 mg HSA/g chitosan microspheres) was obtained at pH 5.0 and 1.5 mg HSA/mL of the initial HSA concentration in the adsorption medium was obtained as the saturation value for HSA adsorption. A very common dye ligand, i.e., Cibacron Blue F3GA was attached to the chitosan microspheres to increase the HSA adsorption capacity. Actually, the HSA adsorption capacity was increased up to 15.35 mg HSA/g chitosan microspheres in the case of Cibacron Blue F3GA attached to chitosan microspheres used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3035–3039, 2002     

Specific sorbents for bilirubin removal from human plasma: Congo red-modified poly(EGDMA/HEMA) microbeads

Congo Red-modified poly(EGDMA–HEMA) microbeads were investigated as a specific sorbent for bilirubin removal from human plasma. Poly(EGDMA–HEMA) microbeads were prepared by a modified suspension copolymerization technique. Congo Red was covalently incorporated into the poly(EGDMA–HEMA) microbeads via condensation reactions between the aromatic amine groups of the dyes and the hydroxyl groups of the HEMA, under alkaline conditions. Bilirubin adsorption was investigated from hyperbilirubinemic human plasma on the poly(EGDMA–HEMA) microbeads containing different amounts of attached Congo Red (between 2.5 and 14.6 μmol/g). The nonspecific bilirubin adsorption on the unmodified poly(EGDMA–HEMA) microbeads were 0.32 mg/g from human plasma. High adsorption rates were observed at the beginning, and the adsorption equilibrium was then gradually achieved in about 30–60 min. Much higher bilirubin adsorption values, up to 11.7 mg/g, were obtained with the Congo Red-modified microbeads especially at 37°C. The numbers (as μmol) of bilirubin molecules to albumin molecules adsorbed on the sorbent microbeads were in the range of 15–20, which showed that bilirubin molecules were preferentially adsorbed to the Congo Red-modified microbeads. Bilirubin adsorption increased with increasing temperature. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68:373–380, 1998     

Dye‐affinity microbeads for removal of phenols and nitrophenols from aquatic systems

Alkali Blue 6B attached poly(2‐hydroxyethyl methacrylate) (PHEMA) microbeads were investigated as dye‐affinity adsorbents for the removal of phenol and nitrophenols (i.e., 2‐nitrophenol, 4‐nitrophenol, and 2,4‐dinitrophenol) from aqueous solutions. PHEMA microbeads were prepared by radical‐suspension polymerization of HEMA in the presence of azobisisobutyronitrile as the initiator. These microbeads with a swelling ratio of 55% and carrying 23.6 μmol Alkali Blue 6B/g polymer were then used in the removal of phenol and nitrophenols from aqueous media. The adsorption was fast in all cases (20‐min equilibrium time). The maximum adsorptions of phenols onto the microbeads carrying Alkali Blue 6B were 145.2 μmol/g for phenol, 87.8 μmol/g for 2,4‐dinitrophenol, 112.6 μmol/g for 4‐nitrophenol, and 104.3 μmol/g for 2‐nitrophenol. The affinity order was phenol > 4‐nitrophenol > 2‐nitrophenol > 2,4‐dinitrophenol. The adsorption of nitrophenols decreased with increasing pH. Desorption of nitrophenols was achieved using a 30% (v/v) methanol solution. The microbeads carrying Alkali Blue 6B are suitable for repeated use for more than five cycles without a noticeable loss of adsorption capacity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2411–2418, 2002     

Affinity microspheres and their application to lysozyme adsorption: Cibacron Blue F3GA and Cu(II) with poly(HEMA-EGDMA)

Lysozyme adsorption onto Cibacron Blue F3GA attached and Cu(II) incorporated poly(2-hydroxyethyl methacrylate–ethylene glycol dimethacrylate) [poly(HEMA-EGDMA)] microspheres was investigated. The microspheres were prepared by suspension polymerization. Various amounts of Cibacron Blue F3GA were attached covalently onto the microspheres by changing the initial concentration of dye in the reaction medium. The microspheres with a swelling ratio of 65%, and carrying different amounts of dye (between 1.4 and 22.5 µmol/g⁻¹) were used in the lysozyme adsorption studies. Lysozyme adsorption on these microspheres from aqueous solutions containing different amounts of lysozyme at different pH values was investigated in batch reactors. The lysozyme adsorption capacity of the dye–metal chelated microspheres (238.2 mg g⁻¹) was greater than that of the dye-attached microspheres (175.1 mg g⁻¹). The maximum lyzozyme adsorption capacities (q_m) and the dissociation constant (k_d) values were found to be 204.9 mg g⁻¹ and 0.0715 mg ml⁻¹ with dye-attached and 270.7 mg g⁻¹ and 0.0583 mg ml⁻¹ with dye–metal chelated microspheres, respectively. More than 90% of the adsorbed lysozyme were desorbed in 60 min in the desorption medium containing 0.5 M KSCN at pH 8.0 or 25 mM EDTA at pH 4.9. © 1999 Society of Chemical Industry     

Cibacron Blue F3GA‐attached magnetic poly(2‐hydroxyethyl methacrylate) beads for human serum albumin adsorption

An affinity dye ligand, Cibacron Blue F3GA, was covalently attached onto magnetic poly(2‐hydroxyethyl methacrylate) (mPHEMA) beads for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. The mPHEMA beads, in the size range of 80 to 120 µm, were prepared by a modified suspension technique. Cibacron Blue F3GA molecules were incorporated on to the mPHEMA beads. The maximum amount of Cibacron Blue F3GA attachment was obtained as 68.3 µmol g^?1. HSA adsorption onto unmodified and Cibacron Blue F3GA‐attached mPHEMA beads was investigated batchwise. The non‐specific adsorption of HSA was very low (1.8 mg g^?1). Cibacron Blue F3GA attachment onto the beads significantly increased the HSA adsorption (94.5 mg g^?1). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (138.3 mg HSA g^?1). Desorption of HSA from Cibacron Blue F3GA‐attached mPHEMA beads was obtained by using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to re‐use Cibacron Blue F3GA‐attached mPHEMA beads without any significant decreases in their adsorption capacities. Copyright © 2004 Society of Chemical Industry     

Nonporous monosize polymeric sorbents: Dye and metal chelate affinity separation of lysozyme

Lysozyme adsorption onto dye‐attached nonporous monosize poly(2‐hydroxyethyl‐methacrylate‐methylmethacrylate) [poly(HEMA‐MMA)] microspheres was investigated. Poly(HEMA‐MMA) microspheres were prepared by dispersion polymerization. The monochloro‐triazine dye, Cibacron Blue F3GA, was immobilized covalently as dye–ligand. These dye‐affinity microspheres were used in the lysozyme adsorption–desorption studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached and metal‐chelated microspheres were studied in a batch reactor. Effect of Cu(II) chelation on lysozyme adsorption was also studied. The nonspecific adsorption of lysozyme on the poly(HEMA‐MMA) microspheres was 3.6 mg/g. Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 247.8 mg/g. Lysozyme adsorption capacity of the Cu(II) incorporated microspheres (318.9 mg/g) was greater than that of the Cibacron Blue F3GA‐attached microspheres. Significant amount of the adsorbed lysozyme (up to 97%) was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye‐ and metal‐chelate affinity chromatography with poly(HEMA‐MMA) microspheres can be applied for lysozyme separation without causing any significant changes and denaturation. Repeated adsorption/desorption processes showed that these novel dye‐attached monosize microspheres are suitable for lysozyme adsorption. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 115–124, 2000     

BSA adsorption onto magnetic polyvinylbutyral microbeads

Bovine serum albumin (BSA) adsorption onto novel and feasible magnetic polyvinylbutyral‐based microbeads was investigated. The microbeads were made of Mowital® B30HH, a commercial product, in the range 125–250 μm by a modified solvent evaporation technique. Magnetite particles were embedded in the polymer structure for favorable magnetic properties, 4.80 emu/g microbeads of saturation magnetization at 6000 Gauss magnetic field. Glutaraldehyde (GA) was used as a bonding agent to increase stability and as a ligand for protein adsorption. The amount of adsorbed BSA was optimized by changing the medium pH and the initial concentrations of GA and BSA. Dynamic adsorption data of batch runs fitted best to Langmiur kinetics. The parameters q_max, k^′_f and k^′_r of the model were estimated through nonlinear regression analysis as 138 mg BSA/g adsorbent, 0.058 ml/(mg BSA · min) and 0.002 min⁻¹, respectively, for magnetic microbeads at pH 5.0 and 25°C. The adsorbed BSA was eluted successfully at pH 8.0 and 25°C. Possibly due to surface roughness and magnetic properties, q_max was found higher than the other adsorbents reported in the literature. The results denote that these microbeads can be an alternative protein adsorbent due to high adsorption capacity and rate, as well as remarkable separation characteristics. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 707–715, 2001     

Preparation and characterization of magnetic polymethylmethacrylate microbeads carrying ethylene diamine for removal of Cu(II), Cd(II), Pb(II), and Hg(II) from aqueous solutions

Magnetic polymethylmethacrylate (mPMMA) microbeads carrying ethylene diamine (EDA) were prepared for the removal of heavy metal ions (i.e., copper, lead, cadmium, and mercury) from aqueous solutions containing different amount of these ions (5–700 mg/L) and at different pH values (2.0–8.0). Adsorption of heavy metal ions on the unmodified mPMMA microbeads was very low (3.6 μmol/g for Cu(II), 4.2 μmol/g for Pb(II), 4.6 μmol/g for Cd(II), and 2.9 μmol/g for Hg(II)). EDA‐incorporation significantly increased the heavy metal adsorption (201 μmol/g for Cu(II), 186 μmol/g for Pb(II), 162 μmol/g for Cd(II), and 150 μmol/g for Hg(II)). Competitive adsorption capacities (in the case of adsorption from mixture) were determined to be 79.8 μmol/g for Cu(II), 58.7 μmol/g for Pb(II), 52.4 μmol/g for Cd(II), and 45.3 μmol/g for Hg(II). The observed affinity order in adsorption was found to be Cu(II) > Pb(II) > Cd(II) > Hg(II) for both under noncompetitive and competitive conditions. The adsorption of heavy metal ions increased with increasing pH and reached a plateau value at around pH 5.0. The optimal pH range for heavy‐metal removal was shown to be from 5.0 to 8.0. Desorption of heavy‐metal ions was achieved using 0.1 M HNO₃. The maximum elution value was as high as 98%. These microbeads are suitable for repeated use for more than five adsorption‐desorption cycles without considerable loss of adsorption capacity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 81–89, 2000     

Poly(acrylamide‐allyl glycidyl ether) cryogel as a novel stationary phase in dye‐affinity chromatography

Poly(acrylamide‐allyl glycidyl ether) [poly(AAm‐AGE)] cryogel was prepared by bulk polymerization which proceeds in an aqueous solution of monomers frozen inside a glass column (cryo‐polymerization). After thawing, the monolithic cryogel contains a continuous polymeric matrix having interconnected pores of 10–100 μm size. Cibacron Blue F3GA was immobilized by covalent binding onto poly(AAm‐AGE) cryogel via epoxy groups. Poly(AAm‐AGE) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(AAm‐AGE) monolithic cryogel was 6.84 g H₂O/g cryogel. Poly(AAm‐AGE) cryogel containing 68.9 μmol Cibacron Blue F3GA/g was used in the adsorption/desorption of human serum albumin (HSA) from aqueous solutions and human plasma. The nonspecific adsorption of HSA was very low (0.2 mg/g). The maximum amount of HSA adsorption from aqueous solution in acetate buffer was 27 mg/g at pH 5.0. Higher HSA adsorption value was obtained from human plasma (up to 74.2 mg/g). Desorption of HSA with a purity of 92% from Cibacron Blue F3GA attached poly(AAm‐AGE) cryogel was achieved using 0.1M Tris/HCl buffer containing 0.5M NaCl. It was observed that HSA could be repeatedly adsorbed and desorbed with poly(AAm‐AGE) cryogel without significant loss in the adsorption capacity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Cu(II)‐incorporated,histidine‐containing,magnetic‐metal‐complexing beads as specific sorbents for the metal chelate affinity of albumin

N‐Methacryloyl‐(L )‐histidine methyl ester (MAH) was synthesized from metharyloyl chloride and histidine. Spherical beads with an average size of 150–250 μm were obtained by the suspension polymerization of ethylene glycol dimethacrylate and MAH in an aqueous dispersion medium. Magnetic poly(ethylene glycol dimethacrylate‐co‐N‐Methacryloyl‐(L )‐histidine methyl ester) [m‐p(EGDMA‐co‐MAH)] microbeads were characterized with swelling tests, electron spin resonance, elemental analysis, and scanning electron microscopy. The specific surface area of the beads was 80.1 m²/g. m‐p(EGDMA‐co‐MAH) microbeads with a swelling ratio of 40.2% and 43.9 μmol of MAH/g were used for the adsorption of bovine serum albumin (BSA) in a batch system. The Cu(II) concentration was 4.1 μmol/g. The adsorption capacity of BSA on the Cu(II)‐incorporated beads was 19.2 mg of BSA/g. The BSA adsorption first increased with the BSA concentration and then reached a plateau, which was about 19.2 mg of BSA/g. The maximum adsorption was observed at pH 5.0, which was the isoelectric point of BSA. The BSA adsorption increased with decreasing temperature, and the maximum adsorption was achieved at 4°C. High desorption ratios (>90% of the adsorbed BSA) were achieved with 1.0M NaSCN (pH 8.0) in 30 min. The nonspecific adsorption of BSA onto the m‐p(EGDMA‐co‐MAH) beads was negligible. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2669–2677, 2004     

纤维素亲和膜对木瓜蛋白酶的吸附特性

以纤维素滤纸膜为载体,染料汽巴蓝F3GA为配基,制备出一种新型亲和膜色谱介质。分别在277,298,310K的均衡实验条件下,批量法对木瓜蛋白酶进行等温吸附测定。所得的数据用准一级动力学模型和准二级动力学模型进行分析。结果表明:准二级动力学模型具有更好的相关性,纤维素染料亲和膜对木瓜蛋白酶的吸附符合Lang-muir吸附模型,在298K条件下吸附现象的热力学参数:ΔGΘ,ΔHΘ,ΔSΘ分别为-7.71kJ/mol,34.91kJ/mol和0.143kJ/(mol.K),染料纤维素亲和膜对木瓜蛋白酶的吸附是自发的,并且是吸热过程。     

Synthesis of acrylamide/acrylic acid‐based aluminum flocculant for dye reduction and textile wastewater treatment

Aluminum hydroxide‐poly[acrylamide‐co‐(acrylic acid)], AHAMAA, was synthesized with a redox initiator by solution polymerization in which the effects of reactant contents were optimized. The effects of pH, temperature, and initial dye concentration on Congo red reduction were investigated. A mixture of Congo red and direct blue 71, and the composite textile dye wastewater were investigated. Adsorptions of both dyes were more effective in the nonbuffered solution than those in the buffered solution, and Congo red adsorbed more than direct blue 71 at all pHs. The adsorption of Congo red increased with increasing temperature and its initial concentration. Both dyes obeyed the Freundlich adsorption isotherm. The maximum adsorptions in 100 mg dm^?3 solution were 109 ± 0.5 mg g^?1 and 62 ± 6.6 mg g^?1 for Congo red and direct blue 71, respectively. At 150 mg dm^?3 of the mixed Congo red and direct blue 71, the adsorption was 142 ± 2 mg g^?1 by 643 ± 3 mg dm^?3 AHAMAA. The 40 mg g^?1 dyes of the textile effluent wastewater were adsorbed by 500 mg dm^?3 AHAMAA. AHAMAA could decrease turbidity of the composite wastewater containing a mixture of reactive and direct dyes from 405 to 23 NTU. POLYM. ENG. SCI., 50:1535–1546, 2010. © 2010 Society of Plastics Engineers     

木瓜蛋白酶在染料Cibacron Blue F3GA纤维素亲和膜上的吸附研究

以纤维素滤纸膜为载体,染料Cibacron Blue F3GA为配基,制备了一种新型亲和膜色谱介质。采用扫描电镜、红外光谱、元素分析等方法对亲和膜介质进行鉴定与表征,该膜具有良好的色谱性能。亲和膜对F3GA的键合质量摩尔浓度达93.7μmol/g。研究了木瓜蛋白酶在亲和膜上的吸附行为,实验表明:在30℃下、酶质量浓度为2 mg/mL、pH=8.0时,吸附质量比可达57.9 mg/g,改变pH值及离子强度等条件对吸附质量比有明显的影响。在最适条件下吸附遵循Langmuir型吸附。可以初步推断,纤维素滤纸膜可以制成性能优良的亲和膜色谱介质,成本低廉,适合工业化分离纯化生物大分子。