Modification of bismaleimide resin by poly(ethylene phthalate‐co‐ethylene terephthalate), poly(ethylene phthalate‐co‐ethylene 4,4′‐biphenyl dicarboxylate), and poly(ethylene phthalate‐co‐ethylene 2,6‐naphthalene dicarboxylate)

Aromatic polyesters were prepared and used to improve the brittleness of bismaleimide resin, composed of 4,4′‐bismaleimidodiphenyl methane and o,o′‐diallyl bisphenol A (Matrimid 5292 A/B resin). The aromatic polyesters included PEPT [poly(ethylene phthalate‐co‐ethylene terephthalate)], with 50 mol % of terephthalate, PEPB [poly(ethylene phthalate‐co‐ethylene 4,4′‐biphenyl dicarboxylate)], with 50 mol % of 4,4′‐biphenyl dicarboxylate, and PEPN [poly(ethylene phthalate‐co‐ethylene 2,6‐naphthalene dicarboxylate)], with 50 mol % 2,6‐naphthalene dicarboxylate unit. The polyesters were effective modifiers for improving the brittleness of the bismaleimide resin. For example, inclusion of 15 wt % PEPT (MW = 9300) led to a 75% increase in fracture toughness, with retention in flexural properties and a slight loss of the glass‐transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Microstructures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The toughening mechanism was assessed as it related to the morphological and dynamic viscoelastic behaviors of the modified bismaleimide resin system. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2352–2367, 2001     

Modification of cyanate ester resin by poly(ethylene phthalate) and related copolyesters

Aromatic polyesters were prepared and used to improve the brittleness of the cyanate ester resin. The aromatic polyesters include poly(ethylene phthalate) (PEP) and poly(ethylene phthalate‐co‐1,4‐phenylene phthalate). The polyesters were effective modifiers for improving the brittleness of the cyanate ester resin. For example, inclusion of 20 wt % PEP (MW 19,800) led to a 120% increase in the fracture toughness (K_IC) with retention in flexural properties and a slight loss of the glass transition temperature compared to the mechanical and thermal properties of the unmodified cured cyanate ester resin. The microstructures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was lower than that of the unmodified resin as determined by thermogravimetric analysis. The water absorptivity of the modified resin increased significantly, compared to that of the unmodified cured cyanate ester resin. The toughening mechanism was discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified cyanate ester resin system. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 208–219, 2000     

Modification of bismaleimide resin by poly(propylene phthalate), poly(butylene phthalate) and related (co)polyesters

Aromatic polyesters were prepared and used to decrease the brittleness of the bismaleimide resin composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA) (Matrimid 5292 resin). The aromatic polyesters included poly(propylene phthalate) (PPP), poly(2,2-dimethylpropylene phthalate) (PDPP), poly(butylene phthalate) (PBP) and poly(butylene phthalate-co-butylene terephthalate) (50mol% terephthalate unit) (PBPT). The polyesters were effective modifiers for decreasing the brittleness of the bismaleimide resin. For example, inclusion of 20wt% PPP (MW 18700) led to 50% increase in the fracture toughness (K_IC) with retention of flexural properties and a slight loss of the glass transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Micro-structures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was slightly lower than that of the unmodified resin as determined by thermogravimetric analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified bismaleimide resin system. © 1998 SCI.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Modification of bismaleimide resin by soluble poly(ester imide) containing trimellitimide moieties

Poly(ester imide)s containing trimellitimide moieties have been used to reduce the brittleness of the bismaleimide resin composed of 4,4′‐bismaleimidediphenyl methane and o,o′‐diallyl bisphenol A. The poly(ester imide)s include poly[ethylene phthalate‐co‐ethylene N‐(1,4‐phenylene)trimellitimide dicarboxylate]s containing 20–40 mol% trimellitimide (TI) unit, and poly[trimethylene phthalate‐co‐trimethylene N‐(1,4‐phenylene)trimellitimide dicarboxylate]s (PESIP) containing 20 mol% TI unit. The poly(ester imide)s are effective modifiers for reducing the brittleness of the bismaleimide resin. For example, when using 30 wt% of PESIP (20 mol% TI unit, M_w 13 500 g mol^?1), the fracture toughness (K_IC) for the modified resin is increased by 80% with retention in flexural properties and a slight loss of the glass transition temperature, compared with the values of the unmodified cured bismaleimide resin. Microstructures of the modified resins have been examined by scanning electron microscopy and dynamic viscoelastic analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified bismaleimide resin system. © 2004 Society of Chemical Industry     

Microstructure and crystallization of melt‐mixed poly(ethylene terephthalate)/poly(ethylene isophthalate) blends

Physical blends of poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), abbreviated PET/PEI (80/20) blends, and of PET and a random poly(ethylene terephthalate‐co‐isophthalate) copolymer containing 40% ethylene isophthalate (PET₆₀I₄₀), abbreviated PET/PET₆₀I₄₀ (50/50) blends, were melt‐mixed at 270°C for different reactive blending times to give a series of copolymers containing 20 mol % of ethylene isophthalic units with different degrees of randomness. ¹³C‐NMR spectroscopy precisely determined the microstructure of the blends. The thermal and mechanical properties of the blends were evaluated by DSC and tensile assays, and the obtained results were compared with those obtained for PET and a statistically random PETI copolymer with the same composition. The microstructure of the blends gradually changed from a physical blend into a block copolymer, and finally into a random copolymer with the advance of transreaction time. The melting temperature and enthalpy of the blends decreased with the progress of melt‐mixing. Isothermal crystallization studies carried out on molten samples revealed the same trend for the crystallization rate. The effect of reaction time on crystallizability was more pronounced in the case of the PET/PET₆₀I₄₀ (50/50) blends. The Young's modulus of the melt‐mixed blends was comparable to that of PET, whereas the maximum tensile stress decreased with respect to that of PET. All blend samples showed a noticeable brittleness. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3076–3086, 2003     

Modification of aromatic diamine-cured epoxy resins by poly(oxymethylene) or hybrid modifiers containing poly(oxymethylene)

A copolymer comprising poly(oxymethylene) (POM, polyacetal) was used to improve the fracture toughness of a resin based on diglycidyl ether of bisphenol A (DGEBA) cured with 3,3′-dimethyl-5,5′-diethyl-4,4′-diaminodiphenyl methane. POM was a less effective modifier for epoxies and a third component was used as a toughener or a compatibilizer for POM. The third component includes polypropylene glycol-type urethane prepolymer (PU) and aromatic polyesters. The hybrid modifiers composed of POM and PU were more effective as modifiers for toughening epoxies than POM alone. In the ternary DGEBA/POM/PU (90/10/10wt ratio) blend, the fracture toughness, K_IC, for the modified resin increased 50% with retention of flexural properties and a slight decrease in glass transition temperature (T_g) compared with those of the unmodified epoxy resin. The aromatic polyesters include poly(ethylene phthalate) (PEP), the related copolyesters and poly(butylene phthalate). PEP was most effective of them as a third component in the hybrid modifier. In the ternary DGEBA/POM/PEP (85/15/10) blend, K_IC for the modified resin increased 70% with medium loss of flexural strength and retention of T_g. The toughening mechanism is discussed in terms of morphological and dynamic viscoelastic behaviour of the modified epoxy resin systems. ©1997 SCI     

Modification of unsaturated polyesters by poly(ethylene glycol) end groups

This article reports on the modification of unsaturated polyesters by poly(ethylene glycol) end groups in order to influence the solution behavior in styrene and to modify mechanical properties of the cured resin. The synthesis was done by the reaction of a carboxyl-terminated unsaturated polyester with various poly(ethylene glycol) mono-methyl ethers of molecular weights from 350 to 2000 g/mol. The characterization and curing properties of the synthesized block copolymers are presented. The glass transition temperatures decrease with increasing length of the poly(ethylene glycol) end groups. The introduction of long poly(ethylene glycol) end groups (2000 g/mol) leads to a phase separated and partly crystalline block copolymer with a melting point of 48°C. The block copolymers can be easily diluted in styrene to create the curable resins. The mixtures containing the block copolymers with the short poly(ethylene glycol) end groups (350 and 550 g/mol) could be cured in a reasonably short time. Compared to commercial unsaturated polyesters the mechanical testing revealed that the tensile strength is decreasing while the elongation is increasing. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 527–537, 1997     

Modification of bismaleimide resin by poly(phthaloyl diphenyl ether) and the related copolymers

Poly(ether ketone ketone)s were prepared and used to improve the brittleness of the bismaleimide resin. The bismaleimide resin was composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA). Poly(ether ketone ketone)s include poly(phthaloyl diphenyl ether) (PPDE), poly(phthaloyl diphenyl ether-co-isophthaloyl diphenyl ether) (PPIDE), and poly(phthaloyl diphenyl ether-co-terephthaloyl diphenyl ether) (PPTDE). PPIDE (50 mol % isophthaloyl unit) was more effective as a modifier for the bismaleimide resin than were PPDE and PPTDE (50 mol % terephthaloyl unit). Morphologies of the modified resins changed from particulate to cocontinuous and to phase-inverted structures, depending on the modifier structure and content. The most effective modification for the cured resins could be attained because of the cocontinuous phase or phase-inverted structure of the modified resins. For example, when using 10 wt % of PPIDE (50 mol % IP unit, MW 349,000), the modified resin had a phase-inverted morphology and the fracture toughness (K_IC) for the modified resins increased 75% with retention in flexural properties and the glass transition temperature, compared to those of the unmodified cured bismaleimide resin. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:769–780, 1998     

Synthesis of bismaleimide resin containing the poly(ethylene glycol) side chain: Curing behavior and thermal properties

Two maleimido end‐capped poly(ethylene glycol) (m‐PEG) of different molecular weights were synthesized and blended at various proportions with bismaleimide resin (4,4′‐bismaleimido diphenylmethane) (BDM). The curing behavior and the thermal properties of the m‐PEG/BDM blends were studied and presented here. It was found that the addition of m‐PEG enhanced the processability of the BDM resin significantly. The processing window of the BDM resin was increased from approximately 20 to 80°C. The addition of m‐PEG modified resins, however, resulted not only in the reduction in the thermal stability of the blended BDM resin but also elevation of the coefficients of thermal expansion. The changes in thermal/mechanical properties of the blends were found to be proportional to the amounts of m‐PEG incorporated. It was observed that the curing behavior, and thermal and mechanical properties, of the blends were independent of the molecular weight of the PEG segment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2935–2945, 2002     

Toughening of aromatic diamine-cured epoxy resins by poly(butylene phthalate)s and the related copolyesters

Aromatic polyesters, prepared by the reaction of aromatic dicarboxylic acids and 1,4-butanediol, were used to improve the toughness of bisphenol-A diglycidyl ether epoxy resin cured with p,p′-diaminodiphenyl sulfone. These polyesters contained poly(butylene phthalate)s (PBP), poly(butylene phthalate-co-butylene isophthalate)s, poly(butylene phthalate-co-butylene terephthalate)s, and poly(butylene phthalate-co-butylene 2,6-naphthalene dicarboxylate)s. All aromatic polyesters used in this study were soluble in the epoxy resin without solvents and were found to be effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PBP (MW 16,300) led to a 120% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism was discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 1996 John Wiley & Sons, Inc.     

Poly(ethylene terephthalate‐co‐isophthalate) copolyesters obtained from ethylene terephthalate and isophthalate oligomers

A series of poly(ethylene terephthalate‐co‐isophthalate) copolyesters containing upto 50%‐mole of isophthalic units were prepared by polycondensation from ethylene terephthalate and ethylene isophthalate fractions of linear oligomers containing from 5 to 6 repeating units in average. The polyesters were obtained in good yields and with high‐molecular‐weights. The microstructure of the copolyesters was studied as a function of reaction time by ¹³C‐NMR showing that a random distribution of the comonomers was achieved since the earlier stages of polycondensation. The melting temperature and enthalpy of the copolyesters decreased with the content of isophthalic units so that copolyesters containing more than 25% of these units were amorphous. Isothermal crystallization studies made on crystalline copolyesters revealed that the crystallization rate of copolyesters decreased with the content in isophthalic units. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization of poly(ethylene oxide) in i-polypropylene–poly(ethylene oxide) blends

A two-stage stable system of isotactic polypropylene–poly(ethylene oxide) blend, in which poly(ethylene oxide) can be permanent either in molten or in crystallized states in the temperature range from 280 to 327 K, was described. The behavior of that blend was explained in terms of fractionated crystallization. A fine dispersion of poly(ethylene oxide) inclusions is required for efficient suppression of crystallization initiated by heterogeneous nuclei. The application of a thin film of polypropylene-poly(ethylene oxide) 9 : 1 blend obtained by quenching for multiuse erasable and rewritable carriers for visible information has been demonstrated. The same sample exhibits different dynamic mechanical properties when poly(ethylene oxide) inclusions are molten or crystallized. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2047–2057, 1997     

Mechanical properties and morphology of poly(ethylene glycol)‐side‐chain‐modified bismaleimide polymer

Two maleimido‐end‐capped poly(ethylene glycol) (m‐PEG)‐modified bismaleimide (BMI) resins [4,4′‐bismaleimido diphenylmethane (BDM)] were synthesized from poly(ethylene glycol) (PEG) of two different molecular weights. A series of m‐PEGs and unmodified BDM were blended and thermally cured. The effect of incorporating m‐PEG side chains on the morphology and mechanical behaviors of BMI polymer were evaluated. The mechanical properties of these m‐PEG‐modified BMIs that were evaluated included flexural modulus, flexural strength, strain at break, fracture toughness, and fracture energy. The morphology of these blends was studied with scanning electron microscopy. All the m‐PEG‐modified BMI polymers showed various degrees of phase separation depending on the molecular weights and concentrations of the m‐PEG used. The effects of these morphological changes in the m‐PEG‐modified BMI polymers were reflected by the improved fracture toughness and strain at break. However, there was a reduction in the flexural moduli in all m‐PEG‐modified BMI polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 715–724, 2002     

Analysis of comonomer content and cyclic oligomers of poly(ethylene terephthalate)

The concentrations of diethylene glycol (DEG) and isophthalate (IPA) units present in two commercial polyesters were measured using Fourier transform infrared (FTIR) spectroscopy and by a lowering of the melting point as measured by differential scanning calorimetric (DSC) method. To carry out the FTIR spectroscopic analysis, it was necessary to synthesise poly(diethylene glycol terephthalate) and poly(ethylene isophthalate). With FTIR spectroscopy, it was possible to measure with reasonable accuracy the DEG content of the two commercial polyesters, whereas by DSC, the presence of IPA in one material affected the results. Cyclic oligomers of the two commercial polyesters were extracted using chloroform and analysed by preparative high performance liquid chromatography and electrospray mass spectrometry. It was found that polymer containing more DEG units promoted the formation of oligomers less than trimer in size, whilst the polymer containing more IPA units promoted the formation of oligomers greater than trimer in size.     

ABA triblock copolymers from poly(p‐dioxanone) and poly(ethylene glycol)

Poly(p‐dioxanone)–poly(ethylene glycol)–poly(p‐dioxanone) ABA triblock copolymers (PEDO) were synthesized by ring‐opening polymerization from p‐dioxanone using poly(ethylene glycol) (PEG) with different molecular weights as macroinitiators in N₂ atmosphere. The copolymer was characterized by ¹H NMR spectroscope. The thermal behavior, crystallization, and thermal stability of these copolymers were investigated by differential scanning calorimetry and thermogravimetric measurements. The water absorption of these copolymers was also measured. The results indicated that the content and length of PEG chain have a greater effect on the properties of copolymers. This kind of biodegradable copolymer will find a potential application in biomedical materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1092–1097, 2006     

A review on the potential biodegradability of poly(ethylene terephthalate)

This paper reviews the state of the art in the field of the hydrolytic degradation of poly(ethylene terephthalate) (PET) under bio-environmental conditions. Most of the papers published so far on this subject have been focused on the hydrolysis of PET at high temperatures. Although some authors claim to enhance the biodegradation properties of this aromatic polyester by copolymerization with readily hydrolysable aliphatic polyesters, no clear and satisfying conclusions can yet be formulated. Poly(ethylene terephthalate-co-lactic acid), poly(ethylene terephthalate-co-ethylene glycol), and poly(ethylene terephthalate-co-ε-caprolactone) block and random copolymers are the modifications mainly investigated for biodegradable applications. The hydrodegradability and biodegradability of PET, PET copolymers and PET blends are detailed in this review. A total of 89 references including 16 patents are cited. © 1999 Society of Chemical Industry     

Preparation of poly(1,4‐cyclohexylenedimethylene phthalate)s and their use as modifiers for aromatic diamine‐cured epoxy resin

Poly(1,4‐cyclohexylenedimethylene phthalate) s, prepared by the reaction of phthalic anhydride and 1,4‐cyclohexane dimethanol (35/65 or 73/27 mol % cis/trans or trans alone), have been used to improve the toughness of bisphenol‐A diglycidyl ether epoxy resin cured with 4,4′‐diaminodiphenyl sulfone. The aromatic polyesters include poly(cis/trans‐1,4‐cyclohexylenedimethylene phthalate) (PCP) based on a commercial cyclohexanedimethanol, poly(trans‐1,4‐cyclohexylenedimethylene phthalate) (trans‐PCP) and poly(cis/trans‐1,4‐cyclohexylenedimethylene phthalate) (cis‐rich PCP) prepared from a cis‐rich diol. The polyesters used were soluble in the epoxy resin without solvents and were effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt% of PCP (MW 6400 g mol⁻¹) led to an 80% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of morphological and dynamic viscoelastic behaviours of the modified epoxy resin system. © 2000 Society of Chemical Industry     

Poly(ethylene isophthalate)s: effect of the tert-butyl substituent on structure and properties

A comparative study of the two isophthalic acid deriving homopolyesters poly(ethylene isophthalate) (PEI) and poly(ethylene 5-tert-butyl isophthalate) (PE^tBI), including synthesis, crystal structure, and thermal and permeability properties, was carried out. The two polyesters were prepared by condensation polymerization in the melt. In both cases, minor amounts of cyclic dimers were observed to form, which were characterized by nuclear magnetic resonance and mass spectroscopy. PEI and PE^tBI were thermally stable up to 400 °C and they appeared to be semicrystalline polyesters, having their melting temperatures between 130 and 135 °C. Their glass-transition temperatures were 62 and 94 °C, respectively. The crystal structure adopted by the two polyesters seemed to consist of a regularly folded conformation, clearly different from the almost extended conformation characteristic of poly(ethylene terephthalate). Gas permeability measurements for N₂, O₂, and CO₂ revealed that PE^tBI is more permeable to these gases than PEI, in spite of having a higher T_g. Furthermore, water vapor diffusion was found to be increased by the insertion of the tert-butyl group, whereas water absorption diminished. The differences in gas and water vapor transport properties observed for these two polyesters were discussed on the basis of their respective molecular structures.     

Properties of Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline Conductive Films: The Effect of Poly(ethylene glycol) Diglycidyl Ether

The effect of polyaniline and poly(ethylene glycol) diglycidyl ether on tensile properties, morphology, thermal degradation, and electrical conductivity of poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films was studied. The poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films were prepared using a solution casting technique at room temperature until a homogeneous solution was produced. Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline/poly(ethylene glycol) diglycidyl ether conductive films exhibit higher electrical properties, tensile strength, modulus of elasticity but lower final decomposition temperature than poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films. Scanning electron microscopy morphology showed that the polyaniline more widely dispersed in the poly(vinyl chloride)/poly(ethylene oxide) blends with the addition of poly(ethylene glycol) diglycidyl ether as surface modifier.