Free radical copolymerization of 4-phenylbut-1-en-3-yne with methylmethacrylate

Summary Free radical copolymerization of 4-phenylbut-1-en-3-yne (PB) with methyl methacrylate(MMA) was studied. The polymerization of MMA was inhibited by the presence of small amounts of PB, but the copolymerization yield increased with increase in the PB concentration, and PB-rich copolymers were obtained. The monomer reactivity ratios, r_MMA and r_PB, were found to be 0.096 and 2.83, respectively. The Q and e values of PB were calculated by using the values of MMA and were found to be 2.69 and 0.74, respectively. The slow polymerization and low molecular weights were attributed to the low propagating activity of PB radicals.     

Spontaneous copolymerization of N‐butyl maleimide and ethyl α‐phenyl acrylate with high alternating tendency

The copolymerization of N‐butyl maleimide (BMI) and ethyl α‐phenyl acrylate (EPA) was successfully carried out without an initiator. A high alternating tendency was observed. The Q, e values were derived by Alfrey–Price equations: Q = 0.09, e = 0.81 for BMI and Q = 0.21, e = ?0.5 for EPA, and the monomer reactivity ratios were r_BMI = 0.15 ± 0.01 and r_EPA = 0.18 ± 0.08, respectively. In this system BMI was donor and EPA was acceptor. The maximum copolymerization rate and molecular weight appeared at 70 mol % (BMI) in the feed ratio. The spontaneous alternating copolymerization was considered to be completed by a contact‐type charge‐transfer complex formed by the monomer pairs. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 355–360, 2004     

Radical polymerization and copolymerization behavior of 1-cyanoethanoyl-4-acryloylthiosemicarbzide

1-Cyanoethanoyl-4-acryloylthiosemicarbazide (CEATS) was synthesized for the first time as a new chelating monomer. Its structure was confirmed by both elemental and spectral analyses. Radical polymerization and copolymerization of CEATS was been carried out in dimethylformamide (DMF) in the presence of azobisisobutyronitrile (AIBN) as an initiator. Kinetic studies for the polymerization behavior of CEATS were performed. The complex formation of the CEATS monomer and polymer (PCEATS) with Cu II cation was investigated and its stability constant determined. The rate of copolymerization of CEATS with some conventional monomers, namely vinyl acetate, methyl methacrylate and acrylonitrile, was measured as a function of the mole fraction of the monomers. The reactivity ratios (r₁, r₂) for the various copolymer systems investigated together with the Q and e values of the CEATS monomer were determined. Moreover, the thermal gravimetric analysis of the prepared polymers and their copolymers with acrylonitrile were also studied.     

Synthesis of chiral polymers containing the acetoxybornyl group and their applications on the asymmetric induction

Optically active 2-endo-actoxy-5-endo-bornyl methacrylate (ABMA) was prepared from (+)-camphor. The homopolymerization of ABMA and copolymerization of ABMA with achiral methyl methacrylate (MMA) or styrene (St) were carried out with 2,2′-azobisisobutyronitrile (AIBN) in benzene. Effects of temperature, solvents, and reaction time on the copolymerization were discussed. The monomer reactivity ratios(r₁, r₂) for poly(ABMA-co-MMA) and poly(ABMA-co-St) and Q and e values for the chiral ABMA in the copolymerization systems were evaluated by the Fineman—Ross method. The absolute value of the specific rotation of poly(ABMA-co-MMA) increased with increasing ABMA unit content. A small deviation from linearity was observed, which suggests that asymmetry is not introduced into the copolymer main chain. Temperature and solvent effects on the specific rotation of the chiral homopolymer and copolymers were investigated. The results suggest that the chiral polymers synthesized in this investigation did not show a strong preference for a particular helical conformation. Applications of the chiral polymers on the asymmetric addition of n-butyllithium to aldehydes were also discussed.     

Atom transfer radical copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

Atom transfer radical polymerization has been applied to simultaneously copolymerize methyl methacrylate (MMA) and N‐cyclohexylmaleimide (NCMI). Molecular weight behaviour and kinetic study on the copolymerization with the CuBr/bipyridine(bpy) catalyst system in anisole indicate that MMA/NCMI copolymerization behaves in a ‘living’ fashion. The influence of several factors, such as temperature, solvent, initiator and monomer ratio, on the copolymerization were investigated. Copolymerization of MMA and NCMI in the presence of CuBr/bpy using cyclohexanone as a solvent instead of anisole displayed poor control. The monomer reactivity ratios were evaluated as r_NCMI = 0.26 and r_MMA=1.35. The glass transition temperature of the resulting copolymer increases with increasing NCMI concentration. The thermal stability of plexiglass could be improved through copolymerization with NCMI. © 2000 Society of Chemical Industry     

Radiation-induced copolymerization of vinylphosphonic dichloride with methyl methacrylate and styrene

The γ-ray-induced copolymerization of vinylphosphonic dichloride (VPDC) with methyl methacrylate (MMA) and styrene (St) was studied at 25°C (liquid phase) and ?78°C (Solid phase). The reaction mechanisms are discussed. The reactivity ratios for the copolymerization of the VPDC–MMA system were determined as follows: The difference between the reactivity between the liquid-phase (25°C) and solid-phase (?78°C) copolymerization is mainly attributable to the r₂ value. The behavior of the liquid-phase copolymerization of the VPDC–St system was anomalous, the r₁ value being negative in the range from 0 to 80 mole-% of VPDC monomer. In the solid-phase (?78°C) copolymerization for the VPDC–St system, the reactivity ratios r₁ and r₂ were 0.097 and 1.6, respectively. The rate of copolymerization (R_p) at 25°C, for both the VPDC–MMA and VPDC–St systems, passes a maximum point at a certain monomer concentration, suggesting that the composition of copolymer is considerably affected by R_p. This phenomenon was interpreted by the assumption that an energy transfer reaction from VPDC monomer to the other vinyl compound can easily occur.     

Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

Radical copolymerization of (−)-menthyl 2-acetamidoacrylate and styrene or methyl methacrylate near ceiling temperature

Radical copolymerization of chiral monomer, (−)-menthyl 2-acetamidoacrylate (1), with low ceiling temperature (T_c = 62.0 °C in [monomer] = 1.0 mol/L) and styrene or methyl methacrylate (MMA) has been studied near ceiling temperature (60 °C) and at the temperature lower than T_c (30 °C). Monomer reactivity ratios and Alfrey-Price Q and e-values of 1 are estimated to be r₁ = 0.27, r₂ = 0.067, Q = 3.0, and e = 1.2 at 30 °C, and r₁ = 0.32 and r₂ = 0.046 at 60 °C for the copolymerization of 1 (M₁) and styrene (M₂), suggesting an alternating tendency at both temperatures, whereas for the copolymerization of 1 (M₁) and MMA (M₂) r₁ and r₂ are estimated to be 2.9 and 0.019 at 30 °C, respectively, indicating longer sequence length of 1. Specific rotation and circular dichroism of the resulting copolymer indicate that styrene, in particular, is effectively incorporated into a helical copolymer structure at 60 °C and even only 25 mol% incorporation of the acetamidoacrylate unit in the copolymer induces the helix formation in solution.     

Synthesis of novel polymethacrylate bearing an (S)‐(+)‐1‐cyclohexylethyl urea group in the side chain and its chiral recognition ability

A new chiral methacrylate, (S)‐(+)‐1‐cyclohexylethyl‐(2‐methacryloyloxyethyl)urea (CEMOU), was synthesized from 2‐methacryloyloxyethyl isocyanate (MOI) and (S)‐(+)‐cyclohexylethylamine. Radical homopolymerization of CEMOU was performed in several solvents to obtain the corresponding chiral polymers having hydrogen bonds based on urea moieties. Specific optical rotations of poly(CEMOU) were slightly changed by the measurement temperature, which may be attributed in part to a change of conformation caused by hydrophobic interaction between the cyclohexyl groups. From the results of radical copolymerization of CEMOU (M₁) with styrene (ST, M₂) or methyl methacrylate (MMA, M₂), monomer reactivity ratios (r₁, r₂) and Alfrey–Price Q–e values were determined: r₁ = 0.89, r₂ = 0.12, Q₁ = 2.45, e₁ = 0.68 for the CEMOU–ST system; r₁ = 0.48, r₂ = 0.18, Q₁ = 8.39, e₁ = 1.97 for the CEMOU–MMA system. The chiroptical property of the poly(CEMOU‐co‐ST) was slightly influenced by the co‐units. Poly(CEMOU)‐bonded silica gel as the chiral stationary phase (CSP) was prepared for high‐performance liquid chromatography (HPLC). The CSP resolved trans‐2‐dibenzyl‐4,5‐di(o‐hydroxyphenyl)‐1,3‐dioxolane in normal phase such as n‐hexane/2‐propanol by HPLC. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1018–1025, 2003     

Copolymerization of N-(4-carboxyphenyl)maleimide with acrylonitrile and the properties of its membrane

N-(4-Carboxyphenyl)maleimide (N-4-CPMI, M₁) was copolymerized with acrylonitrile (AN, M₂) to prepare the copolymer. The monomer reactivity ratios and Alfrey-Price Q, e values were determined as r₁ = 0.56, r₂ = 0.84, Q ₁ = 2.0, Q ₂ = 0.6 and e ₁ = 2.06, e ₂ = 1.2. The membrane of copolymer containing 0.25% CPMI had a good tensile property (67.3 MPa). The 0.75 mole% membrane had an excellent selectivity factor (α = 45.3).     

Reactivity ratios and copolymer properties of 2‐(diisopropylamino)ethyl methacrylate with methyl methacrylate and styrene

Free radical copolymerization kinetics of 2‐(diisopropylamino)ethyl methacrylate (DPA) with styrene (ST) or methyl methacrylate (MMA) was investigated and the corresponding copolymers obtained were characterized. Polymerization was performed using tert‐butylperoxy‐2‐ethylhexanoate (0.01 mol dm^?3) as initiator, isothermally (70 °C) to low conversions (<10 wt%) in a wide range of copolymer compositions (10 mol% steps). The reactivity ratios of the monomers were calculated using linear Kelen–Tüd?s (KT) and nonlinear Tidwell–Mortimer (TM) methods. The reactivity ratios for MMA/DPA were found to be r₁ = 0.99 and r₂ = 1.00 (KT), r₁ = 0.99 and r₂ = 1.03 (TM); for the ST/DPA system r₁ = 2.74, r₂ = 0.54 (KT) and r₁ = 2.48, r₂ = 0.49 (TM). It can be concluded that copolymerization of MMA with DPA is ideal while copolymerization of ST with DPA has a small but noticeable tendency for block copolymer building. The probabilities for formations of dyad and triad monomer sequences dependent on monomer compositions were calculated from the obtained reactivity ratios. The molar mass distribution, thermal stability and glass transition temperatures of synthesized copolymers were determined. Hydrophobicity of copolymers depending on the composition was determined using contact angle measurements, decreasing from hydrophobic polystyrene and poly(methyl methacrylate) to hydrophilic DPA. Copolymerization reactivity ratios are crucial for the control of copolymer structural properties and conversion heterogeneity that greatly influence the applications of copolymers as rheology modifiers of lubricating oils or in drug delivery systems. © 2015 Society of Chemical Industry     

Synthesis and characterization of perfluorinated acrylate–methyl methacrylate copolymers

A novel perfluorinated acrylic monomer 3,5‐bis(perfluorobenzyloxy)benzyl acrylate (FM) with perfluorinated aromatic units was synthesized with 3,5‐bis(perfluorobenzyl)oxybenzyl alcohol, acryloyl chloride, and triethylamine. Copolymers of FM monomer with methyl methacrylate (MMA) were prepared via free‐radical polymerization at 80°C in toluene with 2,2′‐azobisisobutyronitrile as the initiator. The obtained copolymers were characterized by ¹H‐NMR and gel permeation chromatography. The monomer reactivity ratios for the monomer pair were calculated with the extended Kelen–Tüdos method. The reactivity ratios were found to be r₁ = 0.38 for FM, r₂ = 1.11 for MMA, and r₁r₂ < 1 for the pair FM–MMA. This shows that the system proceeded as random copolymerization. The thermal behavior of the copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). The copolymers had only one glass‐transition temperature, which changed from 46 to 78°C depending on the copolymer composition. Melting endotherms were not observed in the DSC traces; this indicated that all of the copolymers were completely amorphous. Copolymer films were prepared by spin coating, and contact angle measurements of water and ethylene glycol on the films indicated a high degree of hydrophobicity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Application of the Monte Carlo simulation method to the investigation of peculiar free‐radical copolymerization reactions: Systems with both reactivity ratios greater than unity (rA > 1 and rB > 1)

With a Monte Carlo simulationmethod, copolymer properties have been thoroughly studied, and the influence of the reactivity ratios and feed composition has been taken into consideration. Instantaneous alterations of the copolymer composition and copolymer heterogeneity, which is also called a randomness parameter, have been examined with data obtained from the simulation at each stage of the copolymerization reaction. The results prove the azeotropic behavior of copolymerization reactions in which both reactivity ratios are greater than unity, although some special reactivity ratio combinations ignore the azeotropic behavior. The copolymer composition reaches an azeotrope point at the end of the copolymerization reaction when the copolymerization is an azeotropic reaction. In addition, the randomness parameter takes its maximum value at the azeotrope point when reactivity ratio r_A is equal to reactivity ratio r_B. Finally, increasing the reactivity ratios causes no change in the trend of copolymer composition/feed composition curves when r_A is equal to r_B. However, the curves produced with larger r_A and r_B values show more fluctuations. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Atom transfer radical homo‐ and copolymerization of styrene and methyl acrylate initiated with trichloromethyl‐ terminated poly(vinyl acetate) macroinitiator: A kinetic study

Atom transfer radical bulk copolymerization of styrene (St) and methyl acrylate (MA) initiated with trichloromethyl‐terminated poly(vinyl acetate) macroinitiator was performed in the presence of CuCl/PMDETA as a catalyst system at 90°C. Linear dependence of ln[M]₀/[M] versus time data along with narrow polydispersity of molecular weight distribution revealed that all the homo‐ and copolymerization reactions proceed according to the controlled/living characteristic. To obtain more reliable monomer reactivity ratios, the cumulative average copolymer composition at moderate to high conversion was determined by ¹H‐NMR spectroscopy. Reactivity ratios of St and MA were calculated by the extended Kelen‐Tudos (KT) and Mao‐Huglin (MH) methods to be r_St = 1.018 ± 0.060, r_MA = 0.177 ± 0.025 and r_St = 1.016 ± 0.053, r_MA = 0.179 ± 0.023, respectively, which are in a good agreement with those reported for the conventional free‐radical copolymerization of St and MA. Good agreement between the theoretical and experimental composition drifts in the comonomer mixture and copolymer as a function of the overall monomer conversion were observed, indicating that the reactivity ratios calculated by copolymer composition at the moderate to high conversion are accurate. Instantaneous copolymer composition curve and number‐average sequence length of comonomers in the copolymer indicated that the copolymerization system tends to produce a random copolymer. However, MA‐centered triad distribution results indicate that the spontaneous gradient copolymers can also be obtained when the mole fraction of MA in the initial comonomer mixture is high enough. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study on monomer reactivity ratios of acrylonitrile/itaconic acid in aqueous deposited copolymerization system initiated by ammonium persulfate

A single water-soluble initiator-ammonium persulfate (APS), not containing alkali metal ions, was first utilized to initiate copolymerization of acrylonitrile (AN)/itaconic acid (IA) in aqueous deposited copolymerization system. Monomer reactivity ratios of this polymerization system were investigated using element analysis method and Q–e schemes. It was found that the monomer reactivity ratios of AN/IA calculated from Q–e schemes are 0.505 (r _AN) and 1.928 (r _IA), while the monomer reactivity ratios of AN/IA in aqueous deposited copolymerization system at 60 °C are 0.64 (r _AN) and 1.37 (r _IA) calculated from Kelen–Tüdõs method, 0.61 (r _AN) and 1.47 (r _IA) from Fineman–Ross method. The three pairs of monomer reactivity ratios are in good agreement. With the increase of the polymerization temperature, the monomer reactivity ratios of AN and IA approach to unity, indicating that the aqueous deposited copolymerization of AN/IA has a tendency to ideal copolymerization. At lower polymerization conversion, the monomer reactivity ratios of AN and IA have hardly any changes. When the polymerization conversion is more than 5%, the monomer reactivity ratio of AN increases, while that of IA decreases.     

Synthesis and characterization of oil sorbers based on docosanyl acrylate and methacrylates copolymers

Docosanyl acrylate (DCA) monomer was copolymerized with different monomer feed ratios of cinnamoyloxy ethyl methacrylate (CEMA) or methyl methacrylate (MMA) monomer to produce different compositions for DCA/CEMA or DCA/MMA copolymer with low conversions.¹H NMR spectroscopy was used to confirm the copolymer structure. DCA was crosslinked with different mol % of CEMA or MMA using dibenzoyl peroxide as initiator and various weight percentages of either 1,1,1‐trimethylolpropane triacrylates or 1,1,1‐trimethylolpropane trimethacrylates crosslinkers. The effects of monomer feed composition, crosslinker concentration, and the hydrophobicity of the copolymer units on swelling properties of the crosslinked polymers were studied through the oil absorbency tests. The network parameters, such as polymer solvent interaction (χ), effective crosslink density (υ_e), equilibrium modulus of elasticity (G_T), and average molecular weight between crosslinks (M_c), were determined and correlated with the structure of the synthesized copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetics for copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

The kinetics for the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) was investigated. The initial copolymerization rate R_p is proportional to the initiator concentration to the power of 0.54. The apparent activation energy of the overall copolymerization was measured to be 69.0 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.42 and r_MMA = 1.63. R_p reduces slightly, and the molecular weight of the resultant copolymer decreases with increasing the concentration of the chain transfer agent N‐dodecanethiol (RSH). The more the transfer agent, the narrower the molecular weight distribution of the resulting copolymer. The following chain‐transfer constant of RSH for the copolymerization of MMA with NCMI in benzene at 50°C was obtained: C_s = 0.23. The glass transition temperature (T_g) of the copolymer increases with increasing f_NCMI, which indicates that adding NCMI can improve the heat resistance of Plexiglas. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1293–1297, 1999     

Monomer-to-water ratios as a tool in controlling emulsion copolymer composition: The methyl acrylate–indene system

A drifting copolymer composition as a function of conversion is an aspect typical of copolymerization. Reducing this so-called composition drift in batch copolymerizations will lead to a decrease in chemical heterogeneity of the copolymers formed. For monomer systems in which the more water-soluble monomer is also the more reactive one, theory predicts that composition drift in emulsion copolymerization can be reduced or even minimized by optimizing the monomer-to-water ratio. The monomer combination methyl acrylate–indene (MA–Ind) meets the requirements needed to minimize composition drift in batch emulsion copolymerization. Therefore, this monomer combination is chosen as a model monomer system in order to verify this theoretical prediction. Reactivity ratios needed for model predictions have been determined by low conversion bulk polymerization, resulting in r_MA = 0.92 ± 0.16 and r_Ind = 0.086 ± 0.025. Furthermore, emulsion copolymerization reactions at the same monomer mole fraction are performed at different monomer to water ratios. From the good agreement between experiments and theoretical predictions for MA–Ind, it was concluded that control and even minimization of composition drift in batch emulsion copolymerization for monomer systems in which the more water-soluble monomer is also the more reactive one is indeed possible by changing the initial monomer-to-water ratio of the reaction mixture provided that the reactivity ratios of both monomers are not too far from unity. © 1994 John Wiley & Sons, Inc.     

Kinetic study of atom transfer radical homo- and copolymerization of styrene and methyl methacrylate initiated with trichloromethyl-terminated poly(vinyl acetate) macroinitiator

Atom transfer radical bulk copolymerization of styrene (St) and methyl methacrylate (MMA) was performed in the presence of CuCl/PMDETA as a catalyst system and trichloromethyl-terminated poly(vinyl acetate) telomer as a macroinitiator at 90 °C. The overall monomer conversion was followed gravimetrically and the cumulative average copolymer composition at moderate to high conversion was determined by ¹H NMR spectroscopy. Reactivity ratios of St and MMA were calculated by the extended Kelen–Tudos (KT) and Mao–Huglin (MH) methods to be r_St = 0.605 ± 0.058, r_MMA = 0.429 ± 0.042 and r_St = 0.602 ± 0.043, r_MMA = 0.430 ± 0.032, respectively, which are in good agreement with those reported for the conventional free-radical copolymerization of St and MMA. The 95% joint confidence limit was used to evaluate accuracy of the estimated reactivity ratios. Results showed that in the controlled/living radical polymerization systems such as ATRP, more reliable reactivity ratios are obtained when copolymer composition at moderate to high conversion is used. Good agreement between the theoretical and experimental composition drifts in the comonomer mixture and copolymer as a function of the overall monomer conversion was observed, indicating the accuracy of reactivity ratios calculated by copolymer composition at the moderate to high conversion. Instantaneous copolymer composition curve and number-average sequence length of comonomers in the copolymer indicated that the copolymerization system tends to produce a random copolymer.     

Study of the Copolymerization Parameters of 2-Thiozyl Methacrylamide with Different Alkyl Acrylates

2-thiozyl methacrylamide (TMA) was synthesized by the reaction of 2-aminothiazole with either methacryloyl chloride or methacrylic acid in the presence of triethylamine and N, N′-dicyclohexylcarbodiimide, respectively. Binary copolymerization reactions of the prepared monomer with methyl acrylate (MA), ethyl acrylate (EA), n-butyl acrylate (BA) and tert-butylacrylate (t.BA) were performed in dimethylformamide at 65^○C using 1 mol% azobisisobutyronitrile (AIBN) as initiator. The structure of the 2-thiozyl methacrylamide monomer and the prepared copolymers was investigated by IR and ¹H NMR spectroscopy. The copolymer compositions were determined from sulphur analysis. Copolymerization parameters for each system were calculated by the Finemen–Ross and Kelen–Tüdös methods. The monomer reactivity ratios for the systems TMA-MA, TMA-EA, TMA-BA, and TMA-tBA were found to be r₁=0.128, r₂=0.740; r₁=0.235, r₂=0.420; r₁=0.420, r₂=0.330 and r₁=1.690, r₂=0.027, respectively. The reactivities of acrylic esters decrease as the alkyl group become bulkier. The average Q and e values for TMA were calculated from the monomer reactivity ratios determined in the present and previous studies.