Synthesis and Characterization of Temperature-Sensitive Poly(N-isopropylacryamide) Hydrogel with Comonomer and Semi-IPN material

A series of temperature and pH sensitive hydrogels were synthesized using N-isopropylacrylamide (NIPAAm) as main monomer, sodium alginate (SA) as semi-IPN material, ethyl acrylate (EA) and acrylic acid (AA) as comonomer, and N-maleyl chitosan (N-MACH) as cross-linker. The temperature and pH sensitive behavior, swelling/deswelling kinetics of the hydrogels were investigated. And the mechanism of the phase transition was summed up. Sodium alginate/Poly(N-isopropylacryamide) semi-interpenetrating polymer network (SA/PNIPAAm semi-IPN) hydrogels exhibited a lower critical solution temperature (LCST) at about 32 °C with no significant deviation from the conventional PNIPAAm hydrogels. Poly(N-isopropylacryamide-co-ethyl acrylate) (P(NIPAAm-co-EA)) hydrogels exhibited LCST at 29–31°C, increasing the amount of EA in the hydrogel gradually decreased the LCST. Poly(N-isopropylacryamide-co-acrylic acid) [P(NIPAAm-co-AA)] hydrogels exhibited LCST at 34–39°C, with decreasing NIPAAm/AA from 96/4 to 92/8 and 90/10, the LCST increased from 34°C to 37°C and 39°C. In the swelling/deswelling kinetics, all the dried hydrogels exhibited fast swelling/deswelling behavior, which might be attributed to macroporous structures of the hydrogels.     

Stereoselective partitioning of organic substrates by thermoresponsive polymers in aqueous phases

Partitioning of organic substrates by thermoresponsive polymer having N‐acryloylaminoalcohol moieties in aqueous phase has been studied. Thermoresponsive polymers, such as poly(N‐isopropylacrylamide) (PNIPAAm) and poly(NIPAAm‐co‐N‐acryloyl‐(±)‐alaninol) (poly(NIPAAm‐co‐HIPAAm)), were found to concentrate several organic substrates into the hydrophobic field generated during their phase transition. The amount of the substrates recoverd from the polymer phase mainly depended on the hydrophobicity of the substrates. Aqueous solutions of PNIPAAm (lower critical solution temperature, LCST = 33°C) and poly(NIPAAm‐co‐HIPAAm) (LSCT = 41°C) containing 1‐phenylethanol showed LCSTs at 22°C and 33°C, respectively. The changes of LCSTs indicate that specific interactions such as hydrogen bonding between the side chain functionalities of the polymers and the substrates influence the phase transition behavior. Moreover, new optically active polymers having chiral aminoalcohol moieties have been synthesized by copolymerizations of NIPAAm with N‐acryloylaminoalcohols such as N‐acryloyl‐(S)‐alaninol and N‐acryloyl‐(S)‐prolinol. The (R)/(S) ratio of 1‐phenylethanol recovered from poly(NIPAAm‐co‐N‐acryloyl‐(S)‐alaninol) and poly(NIPAAm‐co‐N‐acryloyl‐(S)‐prolinol) were determined to be 75/25 and 68/32, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3458–3464, 2013     

Thermosensitive copolymer synthesized by controlled living radical polymerization: Phase behavior of diblock copolymers of poly(N‐isopropyl acrylamide) families

In this study, we prepared a series of thermosensitive polymers with low polydispersity index (PDI) values by nitroxide‐mediated controlled radical polymerization (NMRP) with 2,2,6,6‐tetramethyl‐1‐piperdinyloxy nitroxide (TEMPO) as a stable nitroxide‐free radical. Poly(N‐isopropyl acrylamide) (PNIPAAm)‐block‐poly(N‐tert‐butyl acrylamide) (PNTBA) was successfully synthesized, first, through polymerization with N‐isopropyl acrylamide to obtain the reactive polymer PNIPAAm‐TEMPO and, second, through polymerization by the addition of N‐tert‐butyl acrylamide (NTBA). The added molar fraction of NTBA during the second polymerization was adjusted accordingly to obtain the final polymerization product, a thermosensitive polymer (PNIPAAm‐block‐PNTBA), which had a targeted lower critical solution temperature (LCST). The result shows that the synthesis method used in this study effectively controlled the formation of the polymer to obtain a low PDI. The thermosensitive block copolymer, PNIPAAm‐b‐PNTBA (molar ratio = 9:1), with LCSTs in the range 27.7–39.8°C, was obtained through controlled living radical polymerization with PNIPAAm–TEMPO. Specifically, the 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) had an LCST of 37.4°C; this was close to body temperature, 37°C. The 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) showed potential for use in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43224.     

Thermodynamic investigation of thermoresponsive xanthan‐poly (N‐isopropylacrylamide) hydrogels

Polysaccharide‐based hydrogels, such as xanthan maleate/poly(N‐isopropylacrylamide) (PNIPAAm) interpenetrated polymer networks, are thermostimulable materials of interest for the controlled release of biologically active components due to conformation changes at the low critical‐solution temperature (LCST) PNIPAAm phase transition. The phase transition of these interpenetrated polymer network hydrogels, where PNIPAAm is in a ‘confined’ environment, was examined by high resolution magic angle spinning nuclear magnetic resonance and differential scanning calorimetry. High resolution magic angle spinning nuclear magnetic resonance spectroscopy allows the accurate determination of LCST and an evaluation of the corresponding thermodynamic data. More particularly, the evolution of these data as a function of the composition of the hydrogel, and of the external parameters such as pH and ionic strength, was considered. LCST shows a minimal value with increasing xanthan content. Moreover, it was possible to calculate, as a function of temperature, the fraction of NIPAAm which remains uncollapsed. The data obtained for pure PNIPAAm hydrogels are in good agreement with recently published results. The phase transition of PNIPAAm in a diphasic hydrogel is broader when PNIPAAm is ‘confined’ within an interpenetrated polymer network than in a pure PNIPAAm crosslinked network. The widening of the transition with increasing xanthan content indicates a reduction of the PNIPAAm interchain aggregation in a network structure. Copyright © 2011 Society of Chemical Industry     

Reduction of free radicals and endotoxin by conjugated linoleic acid loaded in an in situ‐synthesized poly(N‐isopropyl acrylamide) thin layer

A thin layer of poly(N‐isopropyl acrylamide) (pNIPAAm) was synthesized in situ on the surface of hydrolyzed polyacrylonitrile (PAN) membrane. This thin layer exhibited both pH response due to the poly(acrylic acid) moiety and temperature response due to the pNIPAAm moiety. The swelling behavior of the membranes was evaluated under various temperatures and pH. The curve of the swelling ratio for the PAN‐NIPAAm showed a lower critical solution temperature. Then, conjugated linoleic acid (CLA) was loaded into the pNIPAAm layer. The effects of CLA on the blood coagulation and oxidative stress were evaluated with the use of human blood. The level of reactive oxygen species (ROS) was measured by the chemiluminescence (CL) method to evaluate the oxidative stress. Furthermore, the removal of bacterial endotoxin (lipopolysaccharide) by CLA‐loaded PAN‐NIPAAm was measured with enzyme‐linked immunosorbent assay. The results show that the LCST swelling curve was at 37°C. PNIPAAm chains form expanded structures under 37°C. At temperatures greater than 37°C, however, the chains form compact structures by dehydration. This makes PNIPAAM membrane due to rapid hydration and dehydration changes of the polymer chain. In addition, the swelling ratio increased by 71% when the pH increased from 5 to 10. The concentration of LPS can be reduced by CLA‐loaded PAN‐NIPAAm 2.1 and 1.2 times of that by unmodified PAN and PAN‐NIPAAm membranes, respectively. In addition, the level of ROS against CLA‐loaded PAN‐NIPAAm was reduced significantly than that against unmodified PAN and PAN‐NIPAAm. Therefore CLA‐loaded PAN‐NIPAAm membrane could offer protection for patients against oxidative stress and could also inhibit lipopolysaccharide for clinical applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Environmentally sensitive hydrogels: N‐isopropyl acrylamide/Acrylamide/ Mono‐, Di‐, Tricarboxylic acid crosslinked polymers

Environmentally sensitive hydrogels responsive to various stimuli such as temperature, pH, ionic strength of the medium and the solvent were prepared by using N‐isopropyl acrylamide (NIPAM), acrylamide (AAm) and monomers that have various number of carboxylic acid (XA) functionality using N,N′‐methylene bisacrylamide (Bis) as crosslinker. Hydrogels were prepared via free radical polymerization reaction in aqueous solution. P(NIPAAm‐co‐AAm) and p(NIPAAm‐co‐AAm)/XA hydrogels that contain monoprotic crotonic acid (CA) exhibit a lover critical solution temperature (LCST) at 28°C, whereas p(NIPAAm‐co‐AAm)/IA (IA:itaconic acid), and P(NIPAAm‐co‐AAm)/ACA (ACA:acotonic acid) hydrogels exhibit a lover critical solution temperature at 30.7°C and 34.4°C, respectively. Spectroscopic and thermal analyses were performed for the structural and thermal characterizations of the prepared hydrogel. The swelling experiments as equilibrium swelling percentages by gravimetrically were carried out in different solvents, at different solutions temperature, pH, and ionic strengths to determine their effects on swelling characteristic of hydrogels. POLYM. ENG. SCI., 55:843–851, 2015. © 2014 Society of Plastics Engineers     

Formation of thermosensitive water‐soluble copolymers with phosphinic acid groups and the thermosensitivity of the copolymers and copolymer/metal complexes

Thermosensitive and water‐soluble copolymers were prepared through the copolymerization of acryloyloxypropyl phosphinic acid (APPA) and N‐isopropyl acrylamide (NIPAAm). The thermosensitivity of the copolymers and copolymer/metal complexes was studied. The APPA–NIPAAm copolymers with less than 11 mol % APPA moiety had a lower critical solution temperature (LCST) of approximately 45°C, but the APPA–NIPAAm copolymers with greater than 21 mol % APPA moiety had no LCST from 25 to 55°C. The APPA–NIPAAm copolymers had a higher adsorption capacity for Sm³⁺, Nd³⁺, and La³⁺ than for Cu²⁺, Ni²⁺ and Co²⁺. The APPA–NIPAAm (10:90) copolymer/metal (Sm³⁺, Nd³⁺, or La³⁺) complexes became water‐insoluble above 45°C at pH 6–7, but the APPA–NIPAAm (10:90) copolymer/metal (Cu²⁺,Ni²⁺, or Co²⁺) complexes were water‐soluble from 25 to 55°C at pH 6–7. The temperature at which both the APPA–NIPAAm copolymers and the copolymer/metal complexes became water‐insoluble increased as the pH values of the solutions increased. The APPA–NIPAAm copolymers were able to separate metal ions from their mixed solutions when the temperature of the solutions was changed; this was followed by centrifugation of the copolymer/metal complexes after the copolymers were added to the metal solutions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 116–125, 2004     

Thermo‐ and pH‐responsive behaviors of graft copolymer and blend based on chitosan and N‐isopropylacrylamide

Thermo‐ and pH‐sensitive polymers were prepared by graft polymerization or blending of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm). The graft copolymer and blend were characterized by Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction measurements, and solubility test. The maximum grafting (%) of chitosan‐g‐(N‐isopropylacrylamide) (NIPAAm) was obtained at the 0.5 M NIPAAm monomer concentration, 2 × 10⁻³ M of ceric ammonium nitrate initiator and 2 h of reaction time at 25°C. The percentage of grafting (%) and the efficiency of grafting (%) gradually increased with the concentration of NIPAAm up to 0.5 M, and then decreased at above 0.5 M NIPAAm concentration due to the increase in the homopolymerization of NIPAAm. Both crosslinked chitosan‐g‐NIPAAm and chitosan/PNIPAAm blend reached an equilibrium state within 30 min. The equilibrium water content of all IPN samples dropped sharply at pH > 6 and temperature > 30°C. In the buffer solutions of various pH and temperature, the chitosan/PNIPAAm blend IPN has a somewhat higher swelling than that of the chitosan‐g‐NIPAAm IPN. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1381–1391, 2000     

Thermoresponsive surface prepared by atom transfer radical polymerization directly from poly(vinylidene fluoride) for control of cell adhesion and detachment

Thermoresponsive surface was prepared from commercial poly(vinylidene fluoride) (PVDF) films via surface‐initiated atom transfer radical polymerization. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the N‐isopropylacrylamide (NIPAAm) monomer. The PVDF surfaces grafted with poly(N‐isopropylacrylamide) [P(NIPAAm)] were characterized by X‐ray photoelectron spectroscopy. Kinetics study revealed that the P(NIPAAm) chain growth from the PVDF surface was consistent with a “controlled” process. The temperature‐dependent swelling behavior of the surfaces in aqueous solution was studied by atomic force microscope. At 37°C [above the lower critical solution temperature (LCST, about 32°C) of NIPAAm], the seeded cells adhered and spread on the NIPAAm grafted PVDF surface. Below the LCST, the cells detached from the P(NIPAAm)‐grafted PVDF surface spontaneously. The thermoresponsive surfaces are potentially useful as stimuli‐responsive adhesion modifiers in the biomedical fields.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermo‐responsive injectable hydrogel system based on poly(N‐isopropylacrylamide‐co‐vinylphosphonic acid). I. Biomineralization and protein delivery

To achieve the injectable hydrogel system in order to improve bone regeneration by locally delivering a protein drug including bone morphogenetic proteins, thermo‐responsive injectable hydrogels composed of N‐isopropylacrylamide (NIPAAm) and vinyl phosphonic acid (VPAc) were prepared. The P(NIPAAm‐co‐VPAc) hydrogels were also biomineralized by urea‐mediation method to create functional polymer hydrogels that deliver the protein drug and mimic the bone extracellular matrix. The loosely cross‐linked P(NIPAAm‐co‐VPAc) hydrogels were pliable and fluid‐like at room temperature and could be injected through a small‐diameter aperture. The lower critical solution temperature (LCST) of P(NIPAAm‐co‐VPAc) hydrogel was influenced by the monomer ratio of NIPAAm/VPAc and the hydrogel with a 96/4 molar ratio of NIPAAm/VPAc exhibited an LCST of ～34.5°C. Water content was influenced by temperature, NIPAAm/VPAc monomer ratio, and biomineralization; however, all hydrogels maintained more than about 77% of the water content even at 37°C. In a cytotoxicity study, the P(NIPAAm‐co‐VPAc) and biomineralized P(NIPAAm‐co‐VPAc) hydrogels did not significantly affect cell viability. The loading content of bovine serum albumin in hydrogel, which was used as a model drug, gradually increased with the amount of VPAc in the hydrogel owing to the ionic interaction between VPAc groups and BSA molecules. In addition, the release behavior of BSA from the P(NIPAAm‐co‐VPAc) hydrogels was mainly influenced by the drug loading content, water content, and biomineralization of the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Immobilization of invertase onto dimer acid‐co‐alkyl polyamine

Invertase was immobilized onto the dimer acid‐co‐alkyl polyamine after activation with 1,2‐diamine ethane and 1,3‐diamine propane. The effects of pH, temperature, substrate concentration, and storage stability on free and immobilized invertase were investigated. Kinetic parameters were calculated as 18.2 mM for K_m and 6.43 × 10^?5 mol dm^?3 min^?1 for V_max of free enzyme and in the range of 23.8–35.3 mM for K_m and 7.97–11.71 × 10^?5 mol dm^?3 min^?1 for V_max of immobilized enzyme. After storage at 4°C for 1 month, the enzyme activities were 21.0 and 60.0–70.0% of the initial activity for free and immobilized enzyme, respectively. The optimum pH values for free and immobilized enzymes were determined as 4.5. The optimum temperatures for free and immobilized enzymes were 45 and 50°C, respectively. After using immobilized enzyme in 3 days for 43 times, it showed 76–80% of its original activity. As a result of immobilization, thermal and storage stabilities were increased. The aim of this study was to increase the storage stability and reuse number of the immobilized enzyme and also to compare this immobilization method with others with respect to storage stability and reuse number. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1526–1530, 2004     

Covalent immobilization of naringinase for the transformation of a flavonoid

Naringinase (EC 3.2.1.40) from Penicillium sp was immobilized by covalent binding to woodchips to improve its catalytic activity. The immobilization of naringinase on glutaraldehyde‐coated woodchips (600 mg woodchips, 10 U naringinase, 45 °C, pH 4.0 and 12h) through 1% glutaraldehyde cross‐linking was optimized. The pH–activity curve of the immobilized enzyme shifted toward a lower pH compared with that of the soluble enzyme. The immobilization caused a marked increase in thermal stability of the enzyme. The immobilized naringinase was stable during storage at 4 °C. No loss of activity was observed when the immobilized enzyme was used for seven consecutive cycles of operations. The efficiency of immobilization was 120%, while soluble naringinase afforded 82% efficacy for the hydrolysis of standard naringin under optimal conditions. Its applicability for debittering kinnow mandarin juice afforded 76% debittering efficiency. Copyright © 2005 Society of Chemical Industry     

Study of dual responsive poly[(maleilated dextran)‐graft‐(N‐isopropylacrylamide)] hydrogel nanoparticles: preparation,characterization and biological evaluation

BACKGROUND: Much interest has recently been shown in fundamental studies and technological developments of polymeric nanoparticles. Novel dual temperature‐ and pH‐sensitive stabilized nanoparticles composed of maleilated dextran (Dex‐MA) and N‐isopropylacrylamide (NIPAAm) were prepared and investigated to be used for the controlled release of 10‐hydroxycamptothecin. RESULTS: The resultant nanoparticles showed spherical geometry, with diameters ranging from 60 to 300 nm, the variation achieved by adjusting the composition ratio or the amounts of surfactant. The size of the nanoparticles increased and the zeta potential reversed with an increase of pH. Also, the lower critical solution temperature (LCST) decreased at pH = 3.0, but increased at pH = 6.0, which suggests that the LCST is dependent on pH. Drug release results obtained showed encapsulation and loading efficiencies were 62.9% and 0.82%, respectively. Cytotoxicity assay of this copolymer indicated no significant toxicity. CONCLUSION: Novel dual temperature‐ and pH‐sensitive Dex‐MA‐graft‐PNIPAAm nanoparticles may provide some advantages for anti‐cancer drug delivery due to a tunable LCST from 35 to 45 °C and controllable dimensions. These nanoscale materials could be excellent candidates for biotechnology and biomedical applications. Copyright © 2009 Society of Chemical Industry     

In-situ study of the structure and dynamics of thermo-responsive PNIPAAm grafted on a cotton fabric

Stimuli-responsive polymeric materials can adapt to various surrounding environments, converting chemical and biochemical changes into optical, electrical and thermal signals, or changing wettability and adhesion properties upon external stimuli. Herein we report a cotton fabric modified with a thermo-responsive polymer, Poly(N-isopropylacrylamide) (PNIPAAm). ¹H solid-state NMR techniques were used to characterize the molecular structure and dynamics of the PNIPAAm brushes, while still grafted on the cotton fabric surfaces, avoiding un-grafting destructive procedures. The results demonstrate that the motion of the grafted PNIPAAm brushes is restricted as the temperature rises above the low critical solution temperature (LCST), which was estimated to be ～34 °C. Variable temperature (VT) experiments were used to investigate the nature of the hydrophilic-hydrophobic transitions of the grafted polymer. The ¹H solid-state NMR techniques used proved to be an extremely sensitive and precise way to probe in-situ the LCST transition of the PNIPAAm brushes, while still grafted on cotton fibres.This work presents a high potential synthesis and analysis route towards stimuli-responsive cotton fibres which can find exceptional applications as novel intelligent fabrics for the textile related industries.     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.     

Comparison of β-galactosidase immobilization by entrapment in and adsorption on poly(2-hydroxyethylmethacrylate) membranes

β-Galactosidase was immobilized in/on poly(2-hydroxyethyl methacrylate) (pHEMA) membranes by two different methods: adsorption on Cibacron F3GA derivatized pHEMA membranes (pHEMA-CB), and entrapment in the bulk of the pHEMA membranes. The maximum β-galactosidase adsorption on pHEMA-CB membranes was obtained as 95·6μgcm^-2 in 2·0mgcm^-3 enzyme solution. The adsorption phenomena appeared to follow a typical Langmuir isotherm. In the entrapment, an increase in β-galactosidase loading resulted in a consistent increase in membrane activity from 3·3×10^-2 to 17·8×10^-2Ucm^-2 pHEMA membranes. The K_m values for both immobilized β-galactosidase (adsorbed 0·32mM and entrapped 0·81mM ) were higher than that of the free enzyme (0·26mM ). The optimum reaction temperature of the adsorbed enzyme was 5°C higher than that of both the free and the entrapped enzyme. The optimum reaction pH was 7·5 for free and both immobilized preparations. After 15 successive uses the retained activity of the adsorbed and the entrapped enzymes was 80% and 95%, respectively. The storage stability of the enzyme was found to increase upon immobilization. ©1997 SCI     

Fast responsive poly(acrylic acid‐co‐N‐isopropyl acrylamide) hydrogels based on new crosslinker

Novel dual temperature‐ and pH‐sensitive poly(acrylic acid‐co‐N‐isopropylacrylamide), AA/NIPAAm, hydrogels were successfully prepared by chemical crosslinking with crosslinkers. Copolymers of AA/NIPAAm were crosslinked in the presence of different mol % of N,N‐methylene bisacrylamide (MBA) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked AA/NIPAAm series are evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MBA concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. The prepared MAAm type AA/NIPAAm hydrogels exhibited a more rapid deswelling rate than MBA type AA/NIPAAm hydrogels in ultra pure water in response to abrupt changes from 20°C to 50°C. The results of this study provide valuable information regarding the development of dual stimuli‐sensitive hydrogels with fast responsiveness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermal characterizations of semi‐interpenetrating polymer networks composed of poly(ethylene oxide) and poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) (PNIPAAm)/poly(ethylene oxide) (PEO) semi‐interpenetrating polymer networks (semi‐IPNs) synthesized by radical polymerization of N‐isopropylacrylamide (NIPAAm) in the presence of PEO. The thermal characterizations of the semi‐IPNs were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). The melting temperature (T_m) of semi‐IPNs appeared at around 60°C using DSC. DEA was employed to ascertain the glass transition temperature (T_g) and determine the activation energy (E_a) of semi‐IPNs. From the results of DEA, semi‐IPNs exhibited one T_g indicating the presence of phase separation in the semi‐IPN, and T_gs of semi‐IPNs were observed with increasing PNIPAAm content. The thermal decomposition of semi‐IPNa was investigated using TGA and appeared at around 370°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3922–3927, 2003     

Synthesis,characterisation and solution thermal behaviour of a family of poly (N-isopropyl acrylamide-co-N-hydroxymethyl acrylamide) copolymers

Thermo-responsive copolymers of poly (N-isopropyl acrylamide-co-N-hydroxymethyl acrylamide)p(NIPAAm-co-HMAAm) with a range of content of hydroxy groups have been synthesised by free radical polymerisation. The polymers were characterised by NMR, FTIR and GPC. A detailed study of the solution thermal properties showed that polymers with up to about 50 wt.% hydroxy monomer show lower critical solution temperature (LCST) properties in water. Polymers with higher hydroxy monomer content are fully soluble at all temperatures up to 100 °C. The effect of pH, salts and solvent additives on the solution thermal behaviour of the copolymers was investigated, showing that “salting-out” salts lowered the LCST and “salting-in” salts caused an initial increase in LCST at low concentrations, but reduced LCST at higher concentrations, in line with the Hoffmeister series. The LCST of any copolymer composition from this family in pure water can be predicted from the empirical equation; LCST = 0.015x² + 0.25x + 31.76, where x is the fraction of the hydroxy monomer. Due to differences in polarity and the length of the carbon chain, methanol and ethanol altered LCST of p(NIPAAm) and its hydroxyl copolymers in different manners, showing a transition from cononsolvency to cosolvency as the hydroxyl content of the copolymer increased. A more complex polyhydroxy compound, sucrose, had very little effect on LCST for either p(NIPAAm) or its hydroxyl copolymers.     

Preparation of thermal‐responsive poly(propylene) membranes grafted with n‐isopropylacrylamide by plasma‐induced polymerization and their water permeation

Poly(propylene) (PP) membrane grafted with poly(N‐isopropylacrylamide) (PNIPAAm), which is known to have a lower critical solution temperature (LCST) at around 32°C, was prepared by the plasma‐induced graft polymerization technique. Graft polymerization of PNIPAAm onto a PP membrane was confirmed by microscopic attenuated total reflection/Fourier transform IR spectroscopy. The grafting yield of PNIPAAm increased with the concentration of N‐isopropylacrylamide monomer and the reaction time of graft polymerization. The average pore size of the PP membrane also affected the grafting yield. From the field emission scanning electron microscopy (FE‐SEM) measurement, we observed a morphological change in the PP‐g‐PNIPAAm membrane under wet conditions at 25°C below LCST. The permeability of water through the PP‐g‐PNIPAAm membrane was controlled by temperature. The PP‐g‐PNIPAAm membrane (PN05 and PN10) exhibited higher water permeability (L_p) than the original PP substrate membrane below LCST. As the temperature increased to above LCST, L_p gradually decreased. In addition, the graft yield of PNIPAAm and the average pore size of the PP substrate influenced water permeability. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1168–1177, 2002; DOI 10.1002/app.10410