Complex amplitude modulation by use of liquid-crystal spatial light modulators

We propose to study the conditions for implementation of complex amplitude modulation on standard liquid-crystal spatial light modulators when illuminated by polarized light. The spatial light modulators are used in a conventional configuration, i.e., the voltage is applied parallel to the wave-front propagation direction. The most commonly used liquid-crystal materials are compared and their usefulness in some general applications discussed. Their specificities with respect to different modulation types and application requirements are briefly described. Typical characteristics such as response time, modulation range, and wavelength insensitivity are also discussed. Finally, as an illustration, a first attempt at nomenclature is proposed for the case of a linearly polarized light.     

Synthesis of three-dimensional light fields with binary spatial light modulators

Computation of a binary spatial light modulator (SLM) pattern that generates a desired light field is a challenging quantization problem for which several algorithms have been proposed, mainly for far-field or Fourier plane reconstructions. We study this problem assuming that the desired light field is synthesized within a volumetric region in the non-far-field range after free space propagation from the SLM plane. We use Fresnel and Rayleigh-Sommerfeld scalar diffraction theories for propagation of light. We show that, when the desired field is confined to a sufficiently narrow region of space, the ideal gray-level complex-valued SLM pattern generating it becomes sufficiently low pass (oversampled) so it can be successfully halftoned into a binary SLM pattern by solving two decoupled real-valued constrained halftoning problems. Our simulation results indicate that, when the synthesis region is considered, the binary SLM is indistinguishable from a lower resolution full complex gray-level SLM. In our approach, free space propagation related computations are done only once at the beginning, and the rest of the computation time is spent on carrying out standard image halftoning.     

Diffraction-based determination of the phase modulation for general spatial light modulators

We describe a characterization method based on diffraction for obtaining the phase response of spatial light modulators (SLMs), which in general exhibit both amplitude and phase modulation. Compared with the conventional interferometer-based approach, the method is characterized by a simple setup that enables in situ measurements, allows for substantial mechanical vibration, and permits the use of a light source with a fairly low temporal coherence. The phase determination is possible even for a SLM with a full amplitude modulation depth, i.e., even if there are nulls in the amplitude transmission characteristic of the SLM. The method successfully determines phase modulation values in the full 2pi rad range with high accuracy. The experimental work includes comparisons with interferometer measurements as well as a SLM characterization with a light-emitting diode (LED).     

Programmable multiple-level phase modulation that uses ferroelectric liquid-crystal spatial light modulators

We present a novel method of producing arbitrarily valued binary phase-only modulation from a commercially available ferroelectric liquid-crystal spatial light modulator that is used in conjunction with simple polarization components. By cascading of such stages, modulators with four and eight equally spaced phase levels are constructed with 128 × 128 pixels. Near-diffraction-limited performance, when stopped down to 64 × 64 pixels, is reported in producing simple diffraction patterns and when used to generate asymmetric spot arrays in the Fourier plane of a lens.     

Encoding amplitude and phase information onto a binary phase-only spatial light modulator

We report what to our knowledge is a new technique for encoding both amplitude and phase information onto a single binary-valued spatial light modulator. In our approach, we spatially modulate the diffraction efficiency of the filter. Light that is not diffracted into the first order is sent into the zero order, effectively allowing amplitude modulation of either the first-order or zero-order diffracted light. This technique has applications in both optical pattern recognition and image processing. Experimental results are included.     

Implementation of high-resolution diffractive optical elements on coupled phase and amplitude spatial light modulators

We propose the optical implementation of diffractive optical elements onto electrically addressed liquid-crystal spatial light modulators. We compare the classic implementations onto amplitude-only or phase-only domains with the implementations onto coupled phase and amplitude (spiral) domains. We demonstrate that the coupling between amplitude and phase provides a trade-off between diffraction efficiency and the signal-to-noise ratio in the reconstruction. Furthermore, when investigating the influence of the maximum dephasing on phase domains and spiral domains through the use of optimal trade-off design, we show that phase-only domains with limited maximum dephasing can provide satisfactory performance. Finally, optical implementations are provided.     

Phase-aberration correction with dual liquid-crystal spatial light modulators

A phase-aberration-correction system that uses high-resolution, twisted nematic liquid-crystal spatial light modulators in a Mach-Zehnder interferometer is presented. A correction algorithm is described and experimentally verified by use initially of one liquid-crystal panel. Phase aberrations are successfully removed by a single liquid-crystal panel, but unacceptably high amplitude variation is introduced into the wave front because of the phase-amplitude coupling of the spatial light modulator. A second panel is used to remove the amplitude modulation. The modified optical system with a multiplicative architecture is described, and results are presented that show the correction of phase aberrations with an amplitude variation of less than 10%.     

Intensity dependent residual amplitude modulation in electro-optic phase modulators

Residual amplitude modulation (RAM) mechanisms in electro-optic phase modulators are detrimental in applications that require high purity phase modulation of the incident laser beam. While the origins of RAM are not fully understood, measurements have revealed that it depends on the beam properties of the laser as well as the properties of the medium. Here we present experimental and theoretical results that demonstrate, for the first time, the dependence of RAM production in electro-optic phase modulators on beam intensity. The results show an order of magnitude increase in the level of RAM, around 10 dB, with a fifteenfold enhancement in the input intensity from 12 to 190 mW/mm2. We show that this intensity dependent RAM is photorefractive in origin.     

Nondiffracting interference patterns generated with programmable spatial light modulators

Nondiffracting beams are of interest for optical metrology applications because the size and shape of the beams do not change as the beams propagate. We have created a generating pattern consisting of a linear combination of two nondiffracting patterns. This pattern forms a nondiffracting interference pattern that appears as a circular array of nondiffracting spots. More complicated multiplexed arrays are also constructed that simultaneously yield two different nondiffracting patterns. We generate these Bessel function arrays with a programmable spatial light modulator. Such arrays would be useful for angular alignment and for optical interconnection applications.     

Volterra series modeling of spatial light modulators

We present a multiple-input, single-output, weakly nonlinear model of spatial light modulators by use of a second-order Volterra series and describe an experimental method to measure the nonlinear transfer functions by means of sinusoidal perturbation and synchronous detection with a lock-in amplifier. We also present an application of this method to a liquid-crystal light valve.     

Object-binarized phase-only matched filtering with dual liquid-crystal spatial light modulators

A real-time optical processing system with dual liquid-crystal spatial light modulators is constructed and used as both an amplitude-input device and a multilevel phase-only filter. Fourier analysis is given to show the performance of light efficiency, signal-to-noise ratio, and discrimination capability with the binarization of gray objects. The ratio of the dc power spectrum to the power spectra for input objects is introduced to incorporate the power spectrum into discrimination-capability evaluation. A numerical calculation is performed for gray-level and binarized amplitude-phase correlations. Improvement of the performance criteria has been achieved for an amplitude in a binary mode to a phase correlator. The higher the threshold level of the binarized objects is, the better performance criteria are produced. The effect of illumination over an input object on the autocorrelation maximum is experimentally investigated. Experimental results are presented to support the calculations.     

Interaction of multiple distortions in spatial light modulators

Spatial light modulators are the key components in real-time optical image-processing systems. The phase and the intensity of their outputs will often depart from ideal behavior. An experimental method is described that permits the effects of multiple distortions, present simultaneously, to be modeled. A computer simulation of a bismuth silicon oxide-based correlator is presented, with spatial light modulators subject to three types of distortion, including phase and amplitude. The experimental method permits both the main effects of the distortions and their interactions to be predicted. Combining all the distortions simultaneously gives a more accurate assessment of the suitability of a spatial light modulator for a given optical processing task. Images of 256 × 256 pixels were used, and the simulation took 15 min. with a Sun SPARCstation 2.     

Harmonic and intermodulation performance of spatial light modulators

A Fourier-series model describing the nonlinear characteristic of a spatial light modulator is presented. With the use of this model, closed-form expressions are obtained for the harmonic and intermodulation performance of a spatial light modulator excited by a multisinusoidal input-write light intensity.     

Pseudorandom encoding for real-valued ternary spatial light modulators

Pseudorandom encoding with quantized real modulation values encodes only continuous real-valued functions. However, an arbitrary complex value can be represented if the desired value is first mapped to the closest real value realized by use of pseudorandom encoding. Examples of encoding real- and complex-valued functions illustrate performance improvements over conventional minimum distance mapping methods in reducing peak sidelobes and in improving the uniformity of spot arrays.     

Phase calibration of spatially nonuniform spatial light modulators

A new 512 x 512 pixel phase-only spatial light modulator (SLM) has been found to deviate from being flat by several wavelengths. Also, the retardation of the SLM relative to voltage varies across the device by as much as 0.25 wavelength. The birefringence of each pixel as a function of address voltage is measured from the intensity of the SLM between crossed polarizers. To these responses are added a reference spatial phase measured by phase shifting interferometry for a single address voltage. Fits to the measured data facilitate the compensation of the SLM to a root-mean-square wave-front error of 0.06 wavelength. The application of these corrections to flatten the full aperture of the SLM sharpens the focal plane spot and reduces the distortion of computer-designed diffraction patterns.     

Optimally tuned spatial light modulators for digital holography

Digital holography and comparative digital holography are applications that require computer-addressable modulators for the optical reconstruction of digital holograms. The quality of the reconstructed holograms depends on the modulator's properties. Therefore a characterization of the modulators is required. We show the result of a modulator characterization and the modulator's influence on the quality of the reconstructed hologram. We then compare qualitatively and quantitatively the optical reconstruction of phase and amplitude holograms by considering their level of detail and their diffraction efficiency.     

Resolution of optically addressed liquid-crystal spatial light modulators

Results are presented of calculations of the modulation transfer function of optically addressed, liquid-crystal, spatial light modulators based on layered photoconductor-liquid crystal structures, including surface-plasmon light modulators. Allowance is made for diffusive spreading of carriers in the photoconductor and the propagation length of surface plasmons in the layered structures. Pis’ma Zh. Tekh. Fiz. 24, 48–53 (July 12, 1998)     

Pseudorandom phase-only encoding of real-time spatial light modulators

We previously proposed a method of mapping full-complex spatial modulations into phase-only modulations. The Fourier transform of the encoded modulations approximates that of the original complex modulations. The amplitude of each pixel is encoded by the property that the amplitude of a random-phasor sum is reduced corresponding to its standard deviation. Pseudorandom encoding is designed for phase-only spatial light modulators that produce 360° phase shifts. Because such devices are rare, experiments are performed with a 326°modulator composed of two In Focus model TVT6000 liquid-crystal displays. Qualitative agreement with theory is achieved despite several nonideal properties of the modulator.     

Beam steering experiment with two cascaded ferroelectric liquid-crystal spatial light modulators

The design, construction, and evaluation of a laser beam steerer that uses two binary ferroelectric liquid-crystal (FLC) spatial light modulators (SLMs) operated in conjunction are presented. The system is characterized by having few components and is in principle lossless. Experimentally, a throughput of approximately 20% was achieved. The simple system design was achieved because of the high tilt angle FLC material used in the SLMs, which were specifically designed and manufactured for this study. By coherently imaging the first SLM onto the second SLM, pixel by pixel, we obtained an effective four-level phase structure with a phase step of 90 degrees. An appropriate alignment procedure is presented. The beam steering performance of the system is reported and analyzed.     

电寻址空间光调制器制作灰度掩模技术的研究

介绍了制作微光学元件灰度掩模的两种方案,它们分别使用TFT-LCD(薄膜晶体管液晶显示器)和DMD(数字微镜器件)两种电寻址空间光调制器,采用并行直写和实时掩模技术,提高了灰度掩模制作的速度和灵活性。刷新率的变化和黑栅衍射效应将导致衍射效率下降,使得曝光深度误差增加。前者可延长曝光时间来消除,后者可通过高填充因子和放大滤波电路予以有效抑制。与LCD掩模相比,用DMD掩模制作的闪耀光栅的衍射效率提高了10%以上。