The simultaneous activation of methane and carbon dioxide to C2 hydrocarbons under pulse corona plasma over La2O3/γ-Al2O3 catalyst

The pulse corona plasma has been used as an activation method for reaction of methane and carbon dioxide, the product was C₂ hydrocarbons and by-products were CO and H₂. Methane conversion and the yield of C₂ hydrocarbons were affected by the carbon dioxide concentration in the feed. The conversion of methane increased with increasing carbon dioxide concentration in the feed whereas the yield of C₂ hydrocarbons decreased. The synergism of La₂O₃/γ-Al₂O₃ and plasma gave methane conversion of 24.9% and C₂ hydrocarbons yield of 18.1% were obtained at the power input of plasma was 30 W. The distribution of C₂ hydrocarbons changed by using Pd-La₂O₃/γ-Al₂O₃ catalyst, the major C₂ product was ethylene.     

Catalytic decomposition of light alkanes, alkenes and acetylene over Ni/SiO2

The decomposition of different hydrocarbons (CH₄, C₂H₆, C₂H₄, C₂H₂, C₃H₈, and C₃H₆) over Ni (5 wt.%)/SiO₂ catalysts was carried out. The initial rates of decomposition of the hydrocarbons, the kinetic curves of the decomposition and the kinetic curves of the hydrogenation of deposited carbon into methane depended on the types of hydrocarbons. In addition, the catalytic life of the Ni/SiO₂ catalyst was also dependent on the types of hydrocarbons, i.e. the life was longer according to the order, alkanes>alkenesacetylene.

The carbons deposited on the catalyst were characterized by SEM and Raman spectroscopy. The appearances of the deposited carbons were different among alkanes, alkenes, and acetylene, i.e. a zigzag fiber structure from methane, and a rolled fiber structure from alkenes and acetylene. From Raman spectra of the deposited carbons, it was found that the degree of graphitization of deposited carbon was higher in the order, alkanes>alkenes>acetylene. These results suggest that the mechanism of decomposition of hydrocarbons and the growth mechanism of carbon fibers on the catalyst were different among alkanes, alkenes and acetylene.     

A comparative study of Ag/Al2O3 and Cu/Al2O3 catalysts for the selective catalytic reduction of NO by C3H6

The selective catalytic reduction (SCR) of NO by C₃H₆ in excess oxygen was evaluated and compared over Ag/Al₂O₃ and Cu/Al₂O₃ catalysts. Ag/Al₂O₃ showed a high activity for NO reduction. However, Cu/Al₂O₃ showed a high activity for C₃H₆ oxidation. The partial oxidation of C₃H₆ gave surface enolic species and acetate species on the Ag/Al₂O₃, but only an acetate species was clearly observed on the Cu/Al₂O₃. The enolic species is a more active intermediate towards NO + O₂ to yield—NCO species than the acetate species on the Ag/Al₂O₃ catalyst. The Ag and Cu metal loadings and phase changes on Al₂O₃ support can affect the activity and selectivity of Ag/Al₂O₃ and Cu/Al₂O₃ catalysts, but the formation of enolic species is the main reason why the activity of the Ag/Al₂O₃ catalyst for NO reduction is higher than that of the Cu/Al₂O₃ catalyst.     

Hydrodeoxygenation of aliphatic esters on sulphided NiMo/γ-Al2O3 and CoMo/γ-Al2O3 catalyst: The effect of water

Water formed during hydrotreating of oxygen-containing feeds has been found to affect the performance of sulphided catalysts in different ways. The effect of water on the activity of sulphided NiMo/γ-Al₂O₃ and CoMo/γ-Al₂O₃ catalysts in hydrodeoxygenation (HDO) of aliphatic esters was investigated in a tubular reactor by varying the amount of water in the feed. In additional experiments, H₂S was added to the feed, alone and simultaneously with water.

Under the same conditions, the NiMo catalyst exhibited a higher activity than the CoMo catalyst. The ester conversions decreased with increase in the amount of added water. When H₂S and water were added simultaneously, the conversion increased to the same level as without water addition on the NiMo catalyst and reached a higher value on the CoMo catalyst. The conversions were highest, however, when only H₂S was added. Unfortunately, the conversions decreased with time under all conditions. On both catalysts, the total yield of the C₇ and C₆ hydrocarbons decreased with the amount of added water, while the concentrations of the oxygen-containing intermediates increased. The presence of H₂S improved the total hydrocarbon yield and shifted the main products towards the C₆ hydrocarbons. Thus, the addition of H₂S effectively compensated the inhibition by water.     

CO, H2 or C3H8 assisted catalytic combustion of methane over supported LaMnO3 monoliths

The effect of the addition of a second fuel such as CO, C₃H₈ or H₂ on the catalytic combustion of methane was investigated over ceramic monoliths coated with LaMnO₃/La-γAl₂O₃ catalyst. Results of autothermal ignition of different binary fuel mixtures characterised by the same overall heating value show that the presence of a more reactive compound reduces the minimum pre-heating temperature necessary to burn methane. The effect is more pronounced for the addition of CO and very similar for C₃H₈ and H₂. Order of reactivity of the different fuels established in isothermal activity measurements was: CO>H₂≥C₃H₈>CH₄. Under autothermal conditions, nearly complete methane conversion is obtained with catalyst temperatures around 800 °C mainly through heterogeneous reactions, with about 60–70 ppm of unburned CH₄ when pure methane or CO/CH₄ mixtures are used. For H₂/CH₄ and C₃H₈/CH₄ mixtures, emissions of unburned methane are lower, probably due to the proceeding of CH₄ homogeneous oxidation promoted by H and OH radicals generated by propane and hydrogen pyrolysis at such relatively high temperatures.

Finally, a steady state multiplicity is found by decreasing the pre-heating temperature from the ignited state. This occurrence can be successfully employed to pilot the catalytic ignition of methane at temperatures close to compressor discharge or easily achieved in regenerative burners.     

Free-radical reactions involved in C1-C3 hydrocarbons interaction with oxide catalysts

Experimental proofs of a free radical mechanism in methane oxidative coupling, with homolytic rupture of the C---H bond are given. High concentrations of free radical sites are produced by mechanical milling of SiO₂. A study of C₁---C₃alkanes interaction with these sites allows to simulate the, processes of alkanes oxidation and oxidative dehydrogenation. The reactivity of ethane and propane is higher than that of methane in accordance with the Polanyi-Semenov rule. Oxidative dehydrogenation of ethane is studied on Cd-containing zeolites. CH₄, C₂H₆ and C₃H₈ oxidative dehydrogenation by O₂ or CO₂ is studied on a MNO/SiO₂ catalyst. The initiation of radical reactions of hydrocarbons on Cl-containing catalysts proceeds via chlorine atoms generation.     

In situ IR and pulse reaction studies on the active oxygen species over SrF2/Nd2O3 catalyst for oxidative coupling of methane

Pulse reaction method and in situ IR spectroscopy were used to characterize the active oxygen species for oxidative coupling of methane (OCM) over SrF₂/Nd₂O₃ catalyst. It was found that OCM activity of the catalyst was very low in the absence of gas phase oxygen, which indicated that lattice oxygen species contributed little to the yield of C₂ hydrocarbons. IR band of superoxide species (O₂⁻) was detected on the O₂-preadsorbed SrF₂/Nd₂O₃. The substitution of ¹⁸O₂ isotope for ¹⁶O₂ caused the IR band of O₂⁻ at 1128 cm⁻¹ to shift to lower wavenumbers (1094 and 1062 cm⁻¹), consistent with the assignment of the spectra to the O₂⁻ species. A good correlation between the rate of disappearance of surface O₂⁻ and the rate of formation of gas phase C₂H₄ was observed upon interaction of CH₄ with O₂-preadsorbed catalyst at 700 °C. The O₂⁻ species was also observed on the catalyst under working condition. These results suggest that O₂⁻ species is the active oxygen species for OCM reaction on SrF₂/Nd₂O₃ catalyst.     

CO hydrogenation over a rhodium vanadate catalyst: Reduction and regeneration of RhVO4 on SiO2

The hydrogenation of CO over an Rh vanadate (RhVO₄) catalyst supported on SiO₂ (RhVO₄/SiO₂) has been investigated after H₂ reduction at 500°C, and the results are compared with those of vanadia-promoted (V₂O₅–Rh/SiO₂) and unpromoted Rh/SiO₂ catalysts. The mean size of Rh particles, which were dispersed by the decomposition of RhVO₄ after the H₂ reduction, was smaller (41 Å) than those (91–101 Å) of V₂O₅–Rh/SiO₂ and Rh/SiO₂ catalysts. The RhVO₄/SiO₂ catalyst showed higher activity and selectivity to C₂ oxygenates than the unpromoted Rh/SiO₂ catalyst after the H₂ pretreatment. The CO conversion of the RhVO₄/SiO₂ catalyst was much higher than that of V₂O₅–Rh/SiO₂ catalyst, and the yield of C₂ oxygenates increased. We also found that the RhVO₄/SiO₂ catalyst can be regenerated by calcination or O₂ treatment at high temperature after the reaction.     

Promoting effects of CO2 on dehydrogenation of propane over a SiO2-supported Cr2O3 catalyst

The effects of carbon dioxide on the dehydrogenation of C₃H₈ to produce C₃H₆ were investigated over several Cr₂O₃ catalysts supported on Al₂O₃, active carbon and SiO₂. Carbon dioxide exerted promoting effects only on SiO₂-supported Cr₂O₃ catalysts. The promoting effects of carbon dioxide over a Cr₂O₃/SiO₂ catalyst were to enhance the yield of C₃H₆ and to suppress the catalyst deactivation.     

ZrOCl_2-H_2SO_4/γ-Al_2O_3催化剂的制备及对1-丁烯齐聚反应的催化性能

以γ-Al_2O_3为载体,负载Zr OCl_2和H_2SO_4制备Zr OCl_2-H_2SO_4/γ-Al_2O_3催化剂,并用于1-丁烯齐聚反应。采用气相色谱在线分析,确定产物组成,考察制备条件对催化剂催化活性的影响,通过1-丁烯转化率和主产物选择性确定适宜的反应条件。结果表明,在Zr OCl_2和H_2SO_4负载质量分数为4.5%和焙烧温度500℃条件下制备的催化剂,在反应温度140℃、1-丁烯液时空速2 h-1和N2分压1.4 MPa条件下,表现出较好的催化活性,1-丁烯转化率96.77%,产物以二聚体(C8)为主,选择性85.99%。该催化剂失活后容易再生,且催化活性良好,1-丁烯转化率92.73%,C8选择性86.73%。     

Kinetics of propylene epoxidation using H2 and O2 over a gold/mesoporous titanosilicate catalyst

The oxidation of propylene to propylene oxide (PO) with hydrogen–oxygen mixtures was studied on gold supported on the mesoporous titanium silicate, Ti-TUD. The catalyst gave stable activity at low conversions of propylene (<6%) and high selectivity to PO (>95%). Kinetic data were fit to a power-rate law and gave the following expression: r_PO = k(H₂)^0.54(O₂)^0.24(C₃H₆)^0.36. The fractional orders in hydrogen, oxygen, and propylene indicated that these reactants interacted with the catalyst to form species that led to the final PO product. The catalyst likely operated by the commonly accepted mechanism of hydrogen peroxide production on gold sites, and epoxidation on titanium centers. Carbon dioxide was formed primarily from further oxidation of PO rather than the oxidation of propylene, while water was produced from the reaction of hydrogen and oxygen.     

Synthesis of C2H4 by partial oxidation of CH4 over LiCl/NiO

Alkali halide added transition metal oxides produced ethylene selectively in oxidative coupling of methane. The role of alkali halides has been investigated for LiCl-added NiO (LiCl/NiO). In the absence of LiCl the reaction over NiO produced only carbon oxides (CO₂ + CO). However, addition of LiCl drastically improved the yield of C₂ compounds (C₂H₆ + C₂H₄). One of the roles of LiCl is to inhibit the catalytic activity of the host NiO for deep oxidation of CH₄. The reaction catalyzed by the LiCl/NiO proceeds stepwise from CH₄ to C₂H₄ through C₂H₆ (2CH₄ → C₂H₆ → C₂H₄). The study on the oxidation of C₂H₆ over the LiCl/NiO showed that the oxidative dehydrogenation of C₂H₆ to C₂H₄ occurs very selectively, which is the main reason why partial oxidation of CH₄ over LiCl/NiO gives C₂H₄ quite selectively. The other role of LiCl is to prevent the host oxide (NiO) from being reduced by CH₄. The catalyst model under working conditions was suggested to be the NiO covered with molten LiCl. XPS studies suggested that the catalytically active species on the LiCl/NiO is a surface compound oxide which has higher valent nickel cations (Ni^(2+δ)+ or Ni³⁺). The catalyst was deactivated at the temperatures>973 K due to vaporization of LiCl and consumption of chlorine during reaction. The kinetic and CH₄---CD₄ exchange studies suggested that the rate-determining step of the reaction is the abstraction of H from the vibrationally excited methane by the molecular oxygen adsorbed on the surface compound oxide.     

Catalytic reduction of SO2 over supported transition-metal oxide catalysts with C2H4 as a reducing agent

This work investigates performances of supported transition-metal oxide catalysts for the catalytic reduction of SO₂ with C₂H₄ as a reducing agent. Experimental results indicate that the active species, the support, the feed ratio of C₂H₄/SO₂, and pretreatment are all important factors affecting catalyst activity. Fe₂O₃/γ-Al₂O₃ was found to be the most active catalyst among six γ-Al₂O₃-supported metal oxide catalysts tested. With Fe₂O₃ as the active species, of the supports tested, CeO₂ is the most suitable one. Using this Fe₂O₃/CeO₂ catalyst, we found that the optimal Fe content is 10 wt.%, the optimal feed ratio of C₂H₄/SO₂ is 1:1, and the catalyst presulfidized by H₂+H₂S exhibits a higher performance than those pretreated with H₂ or He. Although the feed concentrations of C₂H₄:SO₂ being 3000:3000 ppm provide a higher conversion of SO₂, the sulfur yield decreases drastically at temperatures above 300 °C. With higher feed concentrations, maximum yield appears at higher temperatures. The C₂H₄ temperature-programmed desorption (C₂H₄-TPD) and SO₂-TPD desorption patterns illustrate that Fe₂O₃/CeO₂ can adsorb and desorb C₂H₄ and SO₂ more easily than can Fe₂O₃/γ-Al₂O₃. Moreover, the SO₂-TPD patterns further show that Fe₂O₃/γ-Al₂O₃ is more seriously inhibited by SO₂. These findings may properly explain why Fe₂O₃/CeO₂ has a higher activity for the reduction of SO₂.     

Selective catalytic reduction of NO by C2H2 over MoO3/HZSM-5

Molybdenum impregnated HZSM-5 zeolite catalysts with MoO₃ loading from 1 to 8 wt.% were studied in detail for the selective catalytic reduction (C₂H₂-SCR) of NO by acetylene. A 83.9% of NO could be removed by the reductant at 350 °C under 1600 ppm of NO, 800 ppm of C₂H₂ and 9.95% of O₂ in He over 2%MoO₃/HZSM-5 catalyst with a specific activity of in NO elimination and the competitiveness factor (c.f.) of 33.6% for the reductant. The NO elimination level and the c.f. value were ca. 3–4 times as high as those using methane or propene as reductant over the catalyst in the same reaction condition. About same reaction rate was estimated in NO oxidation as that in the NO reduction over each xMoO₃/HZSM-5 (x = 0–8%) catalyst, which confirms that NO₂ is a crucial intermediate for the aimed reaction over the catalysts. Appropriate amount of Mo incorporation to HZSM-5 considerably enhanced the title reaction, both by accelerating the intermediate formation and by strengthening the adsorption NO_x on the catalyst surface under the reaction conditions. Rather lower adsorption tendency of acetylene compared with propene on the catalysts explains the catalyst's steady performance in the C₂H₂-SCR of NO and rapid deactivation in the C₃H₆-SCR of NO.     

The mechanism of SO2 effect on NO reduction with propene over In2O3/Al2O3 catalyst

An In₂O₃/Al₂O₃ catalyst shows high activity for the selective catalytic reduction of NO with propene in the presence of oxygen. The presence of SO₂ in feed gas suppressed the catalytic activity dramatically at high temperatures; however it was enhanced in the low temperature range of 473–573 K. In TPD and FT-IR studies, the formation of sulfate species on the surface of the catalyst caused an inhibition of NO_X adsorption sites, and the absorbance ability of NO was suppressed by the presence of SO₂, and the amount of ad-NO₃⁻ species decreased obviously. This leads to a decrease of catalytic activity at higher temperatures. However, addition of SO₂ enhanced the formation of carboxylate and formate species, which can explain the promotional effect of SO₂ at low temperature, because active C₃H₆ (partially oxidized C₃H₆) is crucial at low temperature.     

Transient kinetics investigations of reaction intermediates involved in CF2Cl2 hydrodechlorination

The reaction intermediates formed during hydrodechlorination of CF₂Cl₂ catalyzed by Pd supported on AlF₃ have been investigated using steady state and transient kinetics experiments. The formation of the coupling product C₂H₆ and its dependence on H₂ partial pressure have been used to investigate the pathways by which possible surface carbene species react. Reactions of surface species formed during the CF₂Cl₂ hydrodechlorination with scavenging agent C₂H₄ yielded addition products typical of metal-carbenes. Information from these experiments suggests that for carbene and fluorocarbene species formed on the surface of a Pd/AlF₃ catalyst the rates of hydrogenation vs. coupling reactions are different.     

On the promotional effect of Pd on the propene-assisted decomposition of NO on chlorinated Ce0.68Zr0.32O2

The selective catalytic reduction (SCR) of NO_x assisted by propene is investigated on Pd/Ce_0.68Zr_0.32O₂ catalysts (Pd/CZ), and is compared, under identical experimental conditions, with that found on a Pd/SiO₂ reference catalyst. Physico-chemical characterisation of the studied catalysts along with their catalytic properties indicate that Pd is not fully reduced to metallic Pd for the Pd/CZ catalysts. This study shows that the incorporation of Pd to CZ greatly promotes the reduction of NO in the presence of C₃H₆. These catalysts display very stable deNO_x activity even in the presence of 1.7% water, the addition of which induces a reversible deactivation of about 10%. The much higher N₂ selectivity obtained on Pd/CZ suggests that the lean deNO_x mechanism occurring on these catalysts is different from that occurring on Pd⁰/SiO₂. A detailed mechanism is proposed for which CZ achieves both NO oxidation to NO₂ and NO decomposition to N₂, whereas PdO_x activates C₃H₆ via ad-NO₂ species, intermediately producing R-NO_x compounds that further decompose to NO and C_xH_yO_z. The role of the latter oxygenates is to reduce CZ to provide the catalytic sites responsible for NO decomposition. The proposed C₃H₆-assisted NO decomposition mechanism stresses the key role of NO₂, R-NO_x and C_xH_yO_z as intermediates of the SCR of NO_x by hydrocarbons.     

Light alkanes CO2 reforming to synthesis gas over Ni based catalysts

The CO₂ reforming of methane and propane has been compared over two different Ni catalysts: one reference Ni/SiO₂ system and a Ni/Mg(Al)O hydrotalcite-derived catalyst, shown previously to display high catalytic stability for long term reforming. By combining the Tapered Element Oscillating Microbalance (TEOM), Temperature Programmed Hydrogenation (TPH), Transmission Electron Microscopy (TEM) and magnetic measurements, the formation of coke and its role on the catalyst activity has been investigated and compared for both hydrocarbons. It was found that Ni/SiO₂ and Ni/Mg(Al)O are both more active for methane reforming than for propane reforming. Coke formation is much more pronounced for propane than for methane over both catalysts. However, for both hydrocarbons a much faster carbon formation is observed over the Ni/SiO₂ catalyst than over the Ni/Mg(Al)O catalyst. The difference in the rates of coke formation for methane and propane is ascribed in the case of propane to partially dehydrogenated C₃ adspecies, which are good coke precursors. The superior stability of the hydrotalcite-derived catalyst is due to the strong interaction of the nickel phase with the support and the capacity of the support to activate CO₂ and channel oxygen to the nickel phase.     

Selective catalytic reduction of NO by C3H8 over CoOx/Al2O3: An investigation of structure–activity relationships

A series of CoO_x/Al₂O₃ catalysts was prepared, characterized, and applied for the selective catalytic reduction (SCR) of NO by C₃H₈. The results of XRD, UV–vis, IR, Far-IR and ESR characterizations of the catalysts suggest that the predominant oxidation state of cobalt species is +2 for the catalysts with low cobalt loading (≤2 mol%) and for the catalysts with 4 mol% cobalt loading prepared by sol–gel and co-precipitation. Co₃O₄ crystallites or agglomerates are the predominant species in the catalysts with high cobalt loading prepared by incipient wetness impregnation and solid dispersion. An optimized CoO_x/Al₂O₃ catalyst shows high activity in SCR of NO by C₃H₈ (100% conversion of NO at 723 K, GHSV: 10,000 h⁻¹). The activity of the selective catalytic reduction of NO by C₃H₈ increases with the increase of cobalt–alumina interactions in the catalysts. The influences of cobalt loading and catalyst preparation method on the catalytic performance suggest that tiny CoAl₂O₄ crystallites highly dispersed on alumina are responsible for the efficient catalytic reduction of NO, whereas Co₃O₄ crystallites catalyze the combustion of C₃H₈ only.     

Selective catalytic reduction of NOx with propylene in the presence of oxygen over Co–Pt promoted H-MFI and HY

Kinetic and in situ spectroscopic studies of Co–Pt/MFI and Co–Pt/HY catalysts for the selective reduction of NO_x with propylene in the presence of oxygen were carried out. The results of catalytic tests of Co–Pt/MFI showed that the addition of Pt to Co based catalyst improved the activity, but a small increase in selectivity to N₂O (15–20%) was observed. In the case of Co–Pt/HY catalyst, the addition of Pt improved the activity more significantly and however, a larger increase in selectivity to N₂O (6–72%) was obtained. It was also found from the results of FT-IR studies of Co–Pt/MFI that the reduction of NO to N₂ was as follows: firstly the oxidation of NO to NO₂ occurred over metallic Pt and NO₂ forms Co–NO₂, Co–ONO, and/or Co–ONO₂; secondly, the partial oxidation of C₃H₆ was happened over Brønsted acid sites and the reaction of NO₂ formed on Co sites with partial oxidized C₃H₆ produced organo-nitro species. These species were dehydrated and isomerized to form isocyanate. Finally, [NCO] type intermediates react with NO from gas phase to selectively yield N₂.