Synthesis and Digestibility Inhibition of Diarylheptanoids: Structure–Activity Relationship

(±)-5-Hydroxy-1,7-bis-(4-hydroxyphenyl)-3-heptanone (2a), (±)-5-hydroxyl-1-(4-hydroxyphenyl)-7-phenyl-3-heptanone (2b), (±)-5-hydroxy-7-(4-hydroxyphenyl)-1-phenyl-3-heptanone (2c), and (±)-5-hydroxy-1,7-bis-(phenyl)-3-heptanone (2d) have been synthesized to study the structure–activity relationship regarding digestibility inhibition in vitro in cow rumen fluid. The activities were compared with the activity of chiral (S)-2a and its glucoside platyphylloside (1), isolated from Betula pendula. Compound 2a was slightly less active, 2b and 2c were more active, and 2d was less active than (S)-2a and platyphylloside.     

Biosynthesis and Structure–Activity Relationship Investigations of the Diazeniumdiolate Antifungal Agent Fragin

Only a few natural products incorporating a diazeniumdiolate moiety have been isolated, and these compounds usually display a broad range of biological activities. Only recently has the first diazeniumdiolate natural product biosynthetic gene cluster been identified in Burkholderia cenocepacia H111, which produces the fungicide (−)-fragin and the signal molecule rac-valdiazen. In this study, l -valine was identified as the initial substrate of (−)-fragin biosynthesis with the aid of feeding experiments using isotopically labelled amino acid. The formation of the diazeniumdiolate was chemically studied with several proposed intermediates. Our results indicate that the functional group is formed during an early stage of the biosynthesis. Furthermore, an oxime compound was identified as a degradation product of (−)-fragin and was also observed in the crude extract of the wild-type strain. Moreover, a structure–activity relationship analysis revealed that each moiety of (−)-fragin is essential for its biological activity.     

Structure–Activity of Valencenoid Derivatives and Their Repellence to the Formosan Subterranean Termite

Eight valencenoid derivatives were evaluated for their repelling activity against Formosan subterranean termites, Coptotermes formosanus Shiraki. Among them, 1,10-dihydronootkatone was the strongest repellent, and valencene was the weakest. Results of the structure-repellency relationships indicated (1) reduction of the ketone group to the alcohol on position 2 of nootkatone curtailed the activity; (2) because of the low activity of valencene relative to nootkatone that the ketone group was essential for repellent activity; (3) reduction of the 1,10 double bond (1,10-dihydronootkatone and tetrahydronootkatone) produced compounds more repellent than nootkatone; (4) the isopropenyl group probably does not participate in binding as evidenced by no significant difference in the repellent activity among nootkatone (double bond between position 11 and 12), isonootkatone (double bond between position 7 and 11), and 11,12-dihydronootkatone.     

Cu–Zn–Cr2O3 Catalysts for Dimethyl Ether Synthesis: Structure and Activity Relationship

The CuO dispersed on ZnCr₂O₄ catalysts derived from Cu–Zn–Cr hydrotalcite like layered double hydroxide precursors with varying Zn/Cr ratios have been synthesized, characterized by BET—Surface area, X-ray diffraction (XRD), temperature programmed reduction (TPR), electron spin resonance (ESR), N₂O titrations and the activities were evaluated for single step dimethyl ether (STD) synthesis from syngas. It is observed that the copper species were in highly dispersed state over Cu–ZnO–Cr₂O₃ at high Zn/Cr ratios while the copper cluster were present at low Zn/Cr ratios. The ESR analysis revealed signals due to isolated Cu²⁺ at high Zn/Cr ratios and clustered Cu²⁺ at low Zn/Cr ratio in fresh catalysts and only Cr³⁺ species in used catalysts. The TPR results indicated that the reduction peak shifted to high temperatures with an increase in chromium content due to large copper crystallites, which was supported by XRD analysis. The conversion of syngas to DME was well correlated with the copper metal surface areas, indicating that STD synthesis can be controlled by methanol synthesis rate.     

Structure–Activity Relationships of 1-Benzoylazulenes at the OX1 and OX2 Orexin Receptors

We previously demonstrated the potential of di- or trisubstituted azulenes as ligands (potentiators, weak agonists, and antagonists) of the orexin receptors. In this study we investigated 27 1-benzoylazulene derivatives, uncovering seven potentiators of the orexin response on OX₁ and two weak dual orexin receptor agonists. For potentiators, replacement of the azulene scaffold by indole retained the activity of four out of six compounds. The structure–activity relationships for agonism and potentiation can be summarized into a bicyclic aromatic ring system substituted with two hydrogen-bond acceptors (1-position, benzoyl; 6-position, carboxyl/ester) within 7–8 Å of each other; a third acceptor at the 3-position is also well tolerated. The same pharmacophoric signature is found in the preferred conformations of the orexin receptor agonist Nag26 from molecular dynamics simulations. Subtle changes switch the activity between weak agonism and potentiation, suggesting overlapping binding sites.     

Structure–Activity Relationships of Benzoic Acid Derivatives as Antifeedants for the Pine Weevil, Hylobius abietis

Aromatic organic compounds found in the feces of the pine weevil, Hylobius abietis (L.) (Coleoptera: Curculionidae), have been shown to deter feeding behavior in this species, which is a serious pest of planted conifer seedlings in Europe. We evaluated 55 benzoic acid derivatives and a few homologs as antifeedants for H. abietis. Structure–activity relationships were identified by bioassaying related compounds obtained by rational syntheses of functional group analogs and structural isomers. We identified five main criteria of efficiency as antifeedants among the benzoic acid derivatives. By predicting optimal structures for H. abietis antifeedants, we attempted to find a commercial antifeedant to protect conifer seedlings against damage by H. abietis in regenerating forests. New, highly effective antifeedants are methyl 2,4-dimethoxybenzoate, isopropyl 2,4-dimethoxybenzoate, methyl 2-hydroxy-3-methoxybenzoate, methyl (3,5-dimethoxyphenyl)acetate, and methyl (2,5-dimethoxyphenyl)acetate. Of these, methyl 2,4-dimethoxybenzoate and isopropyl 2,4-dimethoxybenzoate have the highest antifeedant indices of all substances tested and are the best candidates for practical applications in order to protect planted seedlings in the field.     

Oxidative Dehydrogenation of Ethane Over Novel Li/Dy/Mg Mixed Oxides: Structure–Activity Study

Oxidative dehydrogenation of ethane to ethylene was studied using variously prepared Li/Dy/Mg/Cl mixed metal oxides as catalysts. The catalytic performance was found to be strongly dependant on the method of preparation and the LiCl content of the solids. Ethylene yields of up to 77% were obtained with catalysts prepared by precipitation of the catalyst precursors with an equimolar mixture of NH₄Cl and HCl, and subsequent calcination in synthetic air (i.e., absence of CO₂). Both highest ethylene yields and best long-term stability were achieved with catalysts having the highest chloride loading.Based on kinetic data and high-temperature XRD measurements (under controlled atmosphere), a new reaction mechanism is proposed wherein the active sites of the catalytic system are postulated to reside in molten LiCl, supported on Dy₂O₃/MgO. Oxygen is solved dissociatively in the LiCl melt forming the catalytically active hypochlorite OCl^-. With increasing temperature, OCl^- decomposes to O + Cl^- or O^- + Cl. The two radical species are highly oxidative and can readily activate an alkane by homolytic hydrogen abstraction. The so-created alkane radicals react further with OH to form an olefin and H₂O. At low temperatures, a regime of high apparent activation energy has been determined for high chloride loadings, while at high temperatures and low chloride loadings, a second regime with lower activation energy was found. It is suggested that the first regime is controlled by reaction kinetics, whereas the second regime is diffusion-controlled. Which of the two regimes predominates is strongly dependent on the reaction temperature and the structure and composition of the catalyst.     

Oxadiazole Derivatives as Dual Orexin Receptor Antagonists: Synthesis,Structure–Activity Relationships,and Sleep-Promoting Properties in Rats

The orexin system plays an important role in the regulation of wakefulness. Suvorexant, a dual orexin receptor antagonist (DORA) is approved for the treatment of primary insomnia. Herein, we outline our optimization efforts toward a novel DORA. We started our investigation with rac-[3-(5-chloro-benzooxazol-2-ylamino)piperidin-1-yl]-(5-methyl-2-[1,2,3]triazol-2-ylphenyl)methanone ( 3 ), a structural hybrid of suvorexant and a piperidine-containing DORA. During the optimization, we resolved liabilities such as chemical instability, CYP3A4 inhibition, and low brain penetration potential. Furthermore, structural modification of the piperidine scaffold was essential to improve potency at the orexin 2 receptor. This work led to the identification of (5-methoxy-4-methyl-2-[1,2,3]triazol-2-ylphenyl)-{(S)-2-[5-(2-trifluoromethoxyphenyl)-[1,2,4]oxadiazol-3-yl]pyrrolidin-1-yl}methanone ( 51 ), a potent, brain-penetrating DORA with in vivo efficacy similar to that of suvorexant in rats.     

Structure–property relationships for partially aliphatic polyimides

The structure–property relationship was studied for partially aliphatic polyimides containing alicyclic dianhydride and aromatic diamine unit. Rel-[1S,5R,6R]-3-oxabicyclo[3,2,1]octane-2,4-dione-6-spiro-3′-(tetrahydrofuran-2′,5′-dione) (DAn) was used as an unsymmetrical spiro dianhydride, and 1,2,3,4-cyclopentanetetracarboxylic dianhydride (CPDA) and bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BOCA) were used as symmetrical non-spiro dianhydrides. The dianhydrides were polymerized with two aromatic diamines, 4,4′-oxydianiline (ODA) and 4,4′-(hexafluoroisopropylidene)dianiline (FDA), using a conventional two-step chemical imidization method. Structures of the PAl-PIs prepared were confirmed by ¹H-NMR and FT-IR spectroscopy. Solubility of the polyimides was tested in various organic solvents. Thermal properties of the PAl-PIs were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV-visible spectroscopy was performed to evaluate the optical transparency of the polyimides. The effect of monomer structure on the properties was studied. The PAl-PIs prepared from DAn showed improved solubility, thermal properties, and transparency when compared with PAl-PIs derived from CPDA and BOCA. It is considered that the rigid, unsymmetrical spiro structure of DAn leads to rigidity, bulkiness, irregularity, and non-linearity of the polyimide chains, resulting in the enhanced properties of DAn polyimides. The molecular arrangement in the polyimides has also been studied by wide-angle X-ray diffraction (WAXD) and was correlated with the properties.     

Structure–property correlations of flexible clear coats

In this paper thermomechanical and mechanical properties of various free clear coat films for coil-coated steel sheets were studied by dynamic mechanical analysis and tensile testing. To establish structure–property correlations, polyacrylate and polyester binder resins with varying molar mass and functionality were investigated. The clear coat films based on polyacrylate binders exhibited higher glass transitions values, crosslinking densities, elastic modulus and tensile strength values. For both resin types, a relationship of the properties glass transition temperature, crosslinking density, stiffness and tensile strength and the functionality considering the molar mass and the hydroxyl value of the resins was obtained. The elastic strain energy of the investigated brittle clear coat films depended mainly on the elastic modulus.     

Structure and properties of electrodeposited Ni–Co–YZA composite coatings

The aim is to develop an economical composite coating with high thermal stability. Ni–Co alloys are found to possess better thermal, physical and mechanical properties compared to Ni. Also, oxide particles as distributed phase can impart better thermal stability. Hence, particulates of composite Yttria stabilised zirconia, a commonly used high temperature material and alumina (YZA) were reinforced in various Ni–Co alloy matrices through electrodeposition. The influence of YZA on the microhardness, tribology and corrosion behaviour of Ni–Co alloys with Co contents of 0 wt.%, 17 wt.%, 38 wt.% and 85 wt.% was evaluated. Optical and Scanning Electron Microscopy (SEM) confirmed the presence of YZA particles and Energy Dispersive X-ray Analysis (EDX) revealed the composition. Tribology testing showed that composite containing 38 wt.% Co displayed better wear resistance. It was found from the immersion corrosion studies that Ni–17Co–YZA coating displayed improved corrosion resistance. Thermal stability studies showed that Ni–85Co–YZA coating retained its microhardness at temperatures of 600 °C. Thus, these coatings can be tailored for various applications by varying the cobalt content.     

Highly Selective and Potent Human β-Secretase 2 (BACE2) Inhibitors against Type 2 Diabetes: Design,Synthesis, X-ray Structure and Structure–Activity Relationship Studies

Herein we present the design, synthesis, and biological evaluation of potent and highly selective β-secretase 2 (memapsin 1, beta-site amyloid precursor protein cleaving enzyme 2, or BACE 2) inhibitors. BACE2 has been recognized as an exciting new target for type 2 diabetes. The X-ray structure of BACE1 bound to inhibitor 2 a {N³-[(1S,2R)-1-benzyl-2-hydroxy-3-[[(1S,2S)-2-hydroxy-1-(isobutylcarbamoyl)propyl]amino]propyl]-5-[methyl(methylsulfonyl)amino]-N¹-[(1R)-1-phenylpropyl]benzene-1,3-dicarboxamide} containing a hydroxyethylamine isostere was determined. Based on this structure, a computational docking study was performed which led to inhibitor 2 a -bound BACE2 models. These were used to optimize the potency and selectivity of inhibitors. A systematic structure–activity relationship study led to the identification of determinants of the inhibitors’ potency and selectivity toward the BACE2 enzyme. Inhibitors 2 d [N³-[(1S,2R)-1-benzyl-2-hydroxy-3-[[(1S,2S)-2-hydroxy-1-(isobutylcarbamoyl)pentyl]amino]propyl]-N¹-methyl-N¹-[(1R)-1-phenylpropyl]benzene-1,3-dicarboxamide; K_i=0.031 nm , selectivity over BACE1: ≈174 000-fold] and 3 l [N¹-((2S,3R)-3-hydroxy-1-phenyl-4-((3-(trifluoromethyl)benzyl)amino)butan-2-yl)-N³,5-dimethyl-N³-((R)-1-phenylethyl)isophthalamide; K_i=1.6 nm , selectivity over BACE1: >500-fold] displayed outstanding potency and selectivity. Inhibitor 3 l is nonpeptide in nature and may pave the way to the development of a new class of potent and selective BACE2 inhibitors with clinical potential.     

Structure–Function Relations in Supported Ni–W Sulfide Hydrogenation Catalysts

Ni–W catalysts were prepared by impregnation of commercial -alumina and silica supports. The sulfidation, performed directly after drying at 100°C, yielded fully sulfided Ni–W species on both supports (SEM-EDAX, XPS, XRD). At optimal metals loading (50 wt% NiO + WO₃, Ni/W = 2), the sulfided catalysts had similar texture (N₂ adsorption) and displayed similar activity in dibenzothiophene hydrodesulfurization (DBT HDS), while the activity of the Ni–W/SiO₂ catalyst in toluene hydrogenation (HYD) was six times higher than that of Ni–W/Al₂O₃. This is due to the more than two times higher WS₂ slabs stacking number in Ni–W/SiO₂ compared with Ni–W/Al₂O₃ (XRD, HR-TEM), yielding stronger adsorption of toluene (TPD).     

Self-Assembly,Surface Activity and Structure of n-Octyl-β-D-thioglucopyranoside in Ethylene Glycol-Water Mixtures

The effect of the addition of ethylene glycol (EG) on the interfacial adsorption and micellar properties of the alkylglucoside surfactant n-octyl-β-d-thioglucopyranoside (OTG) has been investigated. Critical micelle concentrations (cmc) upon EG addition were obtained by both surface tension measurements and the pyrene 1:3 ratio method. A systematic increase in the cmc induced by the presence of the co-solvent was observed. This behavior was attributed to a reduction in the cohesive energy of the mixed solvent with respect to pure water, which favors an increase in the solubility of the surfactant with EG content. Static light scattering measurements revealed a decrease in the mean aggregation number of the OTG micelles with EG addition. Moreover, dynamic light scattering data showed that the effect of the surfactant concentration on micellar size is also controlled by the content of the co-solvent in the system. Finally, the effect of EG addition on the microstructure of OTG micelles was investigated using the hydrophobic probe Coumarin 153 (C153). Time-resolved fluorescence anisotropy decay curves of the probe solubilized in micelles were analyzed using the two-step model. The results indicate a slight reduction of the average reorientation time of the probe molecule with increasing EG in the mixed solvent system, thereby suggesting a lesser compactness induced by the presence of the co-solvent.     

Structure and thermal stability of zinc–nickel electrodeposits

ZnNi alloys were electrodeposited from a chloride bath on steel substrates. The effect of nickel bath concentration on chemical composition, structure and microstructure of the deposits is demonstrated. From 0 to 13 nickel, the phases obtained do not correspond to that reported on the thermodynamic phase diagram. It is shown that the substitution of zinc by nickel is responsible for the formation of distorted _d and _d phases corresponding to the supersaturated hexagonal phase of zinc and to the unsaturated cubic phase of Zn–Ni alloy, respectively. Differential scanning calorimetry indicates that the thermal instability of the alloys containing up to 13 wt of nickel, results from the crystallization of the phase from the _d and _d phases at around 200 °C and 250 °C, respectively.     

Structure–property relationship in aging acrylic latex films

We have used environmental scanning electron microscopy (ESEM) and mechanical testing to study the effect of aging parameters (temperature, T and relative humidity, RH) on the structure–property relationship of aged specimens from two acrylic latex compositions, referred to as ‘standard’ and ‘novel’. It was found that the tensile strength of the novel system increases as a function of aging time, whereas the tensile strength of the standard specimens remains almost unchanged. This was attributed to the formation of salt dendrites in the aged novel samples. It was also found that humidity does not have a significant effect on the microstructures observed. However, it was found that aging at lower temperatures results in decreased rate of dendritic formation, which is suggested to be due to decreased diffusion of the species taking part in the crystallisation process. Further examination of fractured surfaces of the studied latex systems revealed features indicative for a more ductile behaviour of the standard specimens and a more brittle behaviour for the novel latex samples.     

Structure of NaF–TeO2 glasses and glass-ceramics

The structure of NaF–TeO₂ glasses and glass-ceramics has been studied by XRD, TEM, SEM, Raman and FTIR techniques. The results suggest that, for NaF ≤10 mol%, the entire NaF content enters the structure to convert TeO₄ units into TeO_3/2F and Na⁺[TeO₃₊₁]^– units. It has also been shown that NaF partially forms amorphous and/or crystalline phases for higher NaF content, where the relative concentration of each phase depends on the NaF content. SEM images show agglomerates of different sizes, which are discrete and spread within the structure. XRD revealed formation of crystalline Te₂O₃F₂ for NaF ≤50 mol%, and a dominant phase of crystalline NaF for NaF >50 mol%. Raman and FTIR spectra have been analyzed to calculate the concentrations of the various structural units in glasses and glass-ceramics.