Synthesis and Characterisation of Polyamides and Polyimides from Amino/Methylene bis[Benzenamine] Styryl Pyridines

Polyamides and polyimides containing diamines, with potential non-linear optical characteristics, were prepared using (E)-4,4′-[[[2-(4-pyridinyl)ethenyl]phenyl]amino]bis[benzenamine] and (E)-4-4′-[[[2-(4-pyridinyl)ethenyl]2-methyl phenyl]amino]bis[benzenamine] condensed with pyromellitic dianhydride to obtain poly(amic acid)s. The poly(amic acid)s were soluble in polar aprotic solvents, such as dimethylformamide, dimethylsulphoxide and dimethylacetamide, and could be cast into transparent, tough, flexible films. Amorphous thermally stable polyimides were formed by cyclodehydration. Similarly, (E)-4,4′-[[[2-(4-pyridinyl)ethenyl]phenyl]methylene]bis[benzenamine] and (E)-4,4′-[[[2-(4-pyridinyl)ethenyl]phenyl]methylene]bis[N-ethylbenzenamine] were condensed with 3-methyladipoyl chloride to obtain other new polyamides. Characterisation using infra-red and nuclear magnetic resonance spectroscopy, X-ray diffraction and thermogravimetric analysis are reported. © 1997 SCI.     

The Use of an Unusual Rearrangement Sequence for the Syntheses of 3‐(1‐Aminoalkylidene)‐3H‐thiophen‐2‐ones and two Examples of their Surprising Electrophilic‐Induced Dimerization Reactions

The reaction of 2‐amino‐3‐carbomethoxythiophene ( 1a ) and 2‐amino‐3‐carboethoxy‐4,5‐dimethylthiophene ( 1b ) with methyl‐ or ethylmagnesium chloride leads to new 3‐(1‐aminoalkylidene)‐3H‐thiophen‐2‐ones 4a—d in good yields (60—87%). Treatment of the compounds 4a and 4c with catalytic amounts of p‐TsOH in boiling CHCl₃ afforded the (±)‐4,4′‐bis‐(1‐aminoalkylidene)‐3′,4′‐4H,2′H‐[2,3′]bithiophenyl‐5,5′‐diones 9a and 9b as new interesting heterocycles in preparatively useful yields (60/mdash;65%).     

Highly refractive polyimides containing pyridine and sulfur units: synthesis and thermal,mechanical, solubility and optical properties

Two series of isomers containing pyridine and sulfur unit aromatic diamine monomers, 4,4′‐bis(5‐amino‐2‐pyridinylsulfanyl)diphenyl sulfide ( 2a ), 4,4′‐bis(6‐amino‐3‐pyridinylsulfanyl)diphenyl sulfide ( 2b ) and 4,4′‐bis(5‐amino‐6‐methyl‐2‐pyridinylsulfanyl)diphenyl sulfide ( 2c ), 4,4′‐bis(5‐amino‐4‐methyl‐2‐pyridinylsulfanyl)diphenyl sulfide ( 2d ), were designed and synthesized. Aimed at clarifying the structure–property relationships of pyridine‐ and sulfur‐containing high refractive polymers, 2a was polymerized with various dianhydrides to prepare polyimides PI ‐1?PI ‐7 and 2b , 2c , 2d were reacted with 4,4′‐[p ‐thiobis(phenylenesulfanyl)]diphthalic anhydride to prepare polyimides PI ‐8?PI ‐10. The polyimides showed excellent optical properties with average refractive indices ranging from 1.7006 to 1.7620 and birefringence as low as 0.0056. Meanwhile, comparative studies on their properties including solubility, thermal and mechanical, and optical transparency properties were performed. Some property differences of the isomers caused by the sequence changes were found. © 2017 Society of Chemical Industry     

Resistive switching characteristics of polyimides derived from 2,2′‐aryl substituents tetracarboxylic dianhydrides

2,2′‐Position aryl‐substituted tetracarboxylic dianhydrides including 2,2′‐bis(biphenyl)‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride and 2,2′‐bis[4‐(naphthalen‐1‐yl)phenyl)]‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride were synthesized. A new series of aromatic polyimides (PIs) were synthesized via a two‐step procedure from 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride and the newly synthesized tetracarboxylic dianhydrides monomers reacting with 2,2′‐bis[4′‐(3″,4″,5″‐trifluorophenyl)phenyl]‐4,4′‐biphenyl diamine. The resulting polymers exhibited excellent organosolubility and thermal properties associated with T_g at 264 °C and high initial thermal decomposition temperatures (T_5%) exceeding 500 °C in argon. Moreover, the fabricated sandwich structured memory devices of Al/PI‐a/ITO was determined to present a flash‐type memory behaviour, while Al/PI‐b/ITO and Al/PI‐c/ITO exhibited write‐once read‐many‐times memory capability with different threshold voltages. In addition, Al/polymer/ITO devices showed high stability under a constant stress or continuous read pulse voltage of ? 1.0 V. Copyright © 2011 Society of Chemical Industry     

Recent Developments in Enantioselective Metal‐Catalyzed Domino Reactions

Since the first definition of domino reactions by Tietze in 1993, an explosive number of these fascinating reactions has been developed, allowing the easily building of complex chiral molecular architectures from simple materials to be achieved in a single step. Even more interesting, the possibility to join two or more reactions in one asymmetric domino process catalyzed by chiral metal catalysts has rapidly become one challenging goal for chemists, due to economical advantages, such as avoiding costly protecting groups and time‐consuming purification procedures after each step. The explosive development of enantioselective metal‐catalyzed domino including multicomponent reactions is a consequence of the considerable impact of the advent of asymmetric transition metal catalysis. This review aims to update the last developments of enantioselective one‐, two‐ and multicomponent domino reactions mediated by chiral metal catalysts, covering the literature since the beginning of 2006. Abbreviations: Ac: acetyl; AQN: anthraquinone; Ar: aryl; bdpp: 2,4‐bis(diphenylphosphino)pentane; BINAP: 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl; BINEPINE: phenylbinaphthophosphepine; BINIM: binapthyldiimine; BINOL: 1,1′‐bi‐2‐naphthol; BIPHEP: 2,2′‐bis(diphenylphosphino)‐1,1′‐biphenyl; Bn: benzyl; Boc: tert‐butoxycarbonyl; Box: bisoxazoline; BOXAX: 2,2′‐bis(oxazolyl)‐1,1′‐binaphthyl; BPTV: N‐benzene‐fused phthaloyl‐valine; Bu: butyl; Bz: benzoyl; Cat: catechol; Chiraphos: 2,3‐bis(diphenylphosphine)butane; cod: cyclooctadiene; Cy: cyclohexyl; DABCO: 1,4‐diazabicyclo[2.2.2]octane; dba: (E,E)‐dibenzylideneacetone; DBU: 1,8‐diazabicyclo[5.4.0]undec‐7‐ene; DCE: dichloroethane; de: diastereomeric excess; DHQ: hydroquinine; DHQD: dihydroquinidine; DIFLUORPHOS: 5,5′‐bis(diphenylphosphino)‐2,2,2′,2′‐tetrafluoro‐4,4′‐bi‐1,3‐benzodioxole; DIPEA: diisopropylethylamine; DMF: dimethylformamide; DMSO: dimethyl sulfoxide; DOSP: N‐p‐dodecylbenzenesulfonylprolinate; DPEN: 1,2‐diphenylethylenediamine; dtb: di‐tert‐butyl; dtbm: di‐tert‐butylmethoxy; E: electrophile; ee: enantiomeric excess; Et: ethyl; FBIP: ferrocene bis‐imidazoline bis‐palladacycle; Fc: ferrocenyl; FOXAP: ferrocenyloxazolinylphosphine; Hex: hexyl; HFIP: hexafluoroisopropyl alcohol; HMPA: hexamethylphosphoramide; iPr‐DuPhos: 1,2‐bis(2,5‐diisopropylphospholano)benzene; Josiphos: 1‐[2‐(diphenylphosphino)ferrocenyl]ethyldicyclohexylphosphine ethanol adduct; L: ligand; MCPBA: 3‐chloroperoxybenzoic acid; Me: methyl; Me‐DuPhos: 1,2‐bis(2,5‐dimethylphospholano)benzene; MEDAM: bis(dimethylanisyl)methyl; MOM: methoxymethyl; Naph: naphthyl; NMI: N‐methylimidazole; MWI: microwave irradiation; Norphos: 2,3‐bis(diphenylphosphino)‐bicyclo[2.2.1]hept‐5‐ene; Ns: nosyl (4‐nitrobenzene sulfonyl); Nu: nucleophile; Oct: octyl; Pent: pentyl; Ph: phenyl; PHAL: 1,4‐phthalazinediyl; Pin: pinacolato; PINAP: 4‐[2‐(diphenylphosphino)‐1‐naphthalenyl]‐N‐[1‐phenylethyl]‐1‐phthalazinamine; Pr: propyl; Py: pyridyl; PYBOX: 2,6‐bis(2‐oxazolyl)pyridine; QUINAP: 1‐(2‐diphenylphosphino‐1‐naphthyl)isoquinoline; QUOX: quinoline‐oxazoline; Segphos: 5,5′‐bis(diphenylphosphino)‐4,4′‐bi‐1,3‐benzodioxole; Solphos: 7,7′‐bis(diphenylphosphino)‐3,3′,4,4′‐tetrahydro‐4,4′‐dimethyl‐8,8′‐bis‐2H‐1,4‐benzoxazine; SPRIX: spirobis(isoxazoline); SYNPHOS: 6,6′‐bis(diphenylphosphino)‐2,2′,3,3′‐tetrahydro‐5,5′‐bi‐1,4‐benzodioxin; Taniaphos: [2‐diphenylphosphinoferrocenyl](N,N‐dimethylamino)(2‐diphenylphosphinophenyl)methane; TBS: tert‐butyldimethylsilyl; TC: thiophene carboxylate; TCPTTL: N‐tetrachlorophthaloyl‐tert‐leucinate; TEA: triethylamine; Tf: trifluoromethanesulfonyl; TFA: trifluoroacetic acid; THF: tetrahydrofuran; TMS: trimethylsilyl; Tol: tolyl; Ts: 4‐toluenesulfonyl (tosyl); C₃‐Tunephos: 1,13‐bis(diphenylphosphino)‐7,8‐dihydro‐6H‐dibenzo[f,h][1,5]dioxonin; VAPOL: 2,2′‐diphenyl‐[3,3′‐biphenanthrene]‐4,4′‐diol     

Synthesis of Ester Based Cationic Pyridinium Gemini Surfactants and Appraisal of Their Surface Active Properties

New pyridinium gemini surfactants have been synthesized by esterification of halogenated carboxylic acids with long chain fatty alcohols furnishing respective esters (dodecyl-2-chloroacetate, tetradecyl-2-chloroacetate, hexadecyl-2-chloroacetate, dodecyl-2-bromoacetate, tetradecyl-2-bromoacetate and hexadecyl-2-bromoacetate) followed by their subsequent treatment with 4,4′-trimethylene dipyridine resulting in the formation of title Gemini surfactants: 4,4′-(propane-1,3-diyl)bis1-{2-(dodecyloxy)-2-oxoethyl}; 4,4′-(propane-1,3-diyl)bis{1-(2-(tetradecyloxy)-2-oxoethyl}; 4,4′-(propane-1,3-diyl)bis{1-(2-(hexadecyloxy)-2-oxoethyl} dipyridinium chlorides; 4,4′-(propane-1,3-diyl)bis{1-(2-(dodecyloxy)-2-oxoethyl}; 4,4′-(propane-1,3-diyl)bis{1-(2-(tetradecyloxy)-2-oxoethyl} and 4,4′-(propane-1,3-diyl)bis{1-(2-(hexadecyloxy)-2-oxoethyl} dipyridinium bromides. Their identifications are based on IR, ¹H-NMR, ¹³C-NMR, DEPT, COSY and Mass spectral studies. Their surface active properties were also evaluated on the basis of surface tension and conductivity measurements.     

Microwave‐assisted synthesis of new optically active poly(ester‐imide)s containing N,N′‐(pyromellitoyl)‐bis‐L‐phenylalanine moieties

Pyromellitic dianhydride (benzene‐1,2,4,5‐tetracarboxylic dianhydride) (1) was reacted with L‐phenylalanine (2) in a mixture of acetic acid and pyridine (3 : 2) and the resulting imide‐acid [N,N′‐(pyromellitoyl)‐bis‐L‐phenylalanine diacid] (4) was obtained in quantitative yield. The compound (4) was converted to the N,N′‐(pyromellitoyl)‐bis‐L‐phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diols such as phenol phthalein (6a), bisphenol‐A (6b), 4,4′‐hydroquinone (6c), 1,8‐dihydroxyanthraquinone (6d), 4,4‐dihydroxy biphenyl (6e), and 2,4‐dihydroxyacetophenone (6f) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o‐cresol. The polymerization reactions proceeded rapidly and are completed within 20 min, producing a series of optically active poly(ester‐imide)s with good yield and moderate inherent viscosity of 0.10–0.26 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐imide)s are reported. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2211–2216, 2002     

Microwave‐assisted polycondensation of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine) diacid chloride with aromatic diols

A new facile and rapid polycondensation reaction of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine) diacid chloride (1) with several aromatic diols such as phenol phthalein (2a), bis phenol‐A (2b), 4,4′‐hydroquinone (2c), 1,4‐dihydroxyanthraquinone (2d), 1,8‐dihydroxyanthraquinone (2e), 1,5‐dihydroxy naphthalene (2f), dihydroxy biphenyl (2g), and 2,4‐dihydroxyacetophenone (2h) was performed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o‐cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 10 min, producing a series of optically active poly(ester‐imide)s with quantitative yield and high inherent viscosity of 0.50–1.12 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of this optically active poly(ester‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 3003–3009, 2000     

Part 14. Synthesis and properties of new polyketoamine polymers containing cycloalkanone moieties in the main chain

A new interesting class of polyketoamine polymers based on diarylidenecycloalkanone were synthesized by suspension polycondensation. These polymers were synthesized via polymerization of 2,5‐bis(4‐chloroacetylbenzylidene)cyclopentanone and 2,6‐bis(4‐chloroacetylbenzylidene)cyclohexanone with different aliphatic and aromatic diamines including, p‐phenylenediamine, m‐phenylenediamine, o‐phenylenediamine, 4,4′‐diaminodiphenylmethane, 4,4′‐diaminodiphenylether, 4,4′‐diaminodiphenylsulfone, hydrazine hydrate, 1,2‐diaminoethane, 1,3‐diaminopropane and 1,8‐diaminooctane. Model compounds were prepared by condensation of 2,5‐bis(4‐chloroacetylbenzylidene)cyclopentanone and/or 2,6‐bis(4‐chloroacetylbenzylidene)cyclohexanone with aniline in dry benzene, and their structure was confirmed by elemental analysis and spectroscopy. The structure of the polymers obtained was also confirmed by the same methods. Moreover, the identification of the polymers was carried out by other techniques, eg crystallinity from X‐ray spectroscopy, viscosimetry, thermogravimetric analysis; the morphological properties of selected examples were tested by scanning electron microscopy. The electrical conductivity of selected examples is about 10^?12 ohm cm^?1. The results are in accord with the structure. © 2002 Society of Chemical Industry     

Disubstituted p-phenylene monomers. α-methyl- and α-phenyl-vinyl derivatives of benzene,biphenyl, p-terphenyl,and p,p′-diphenoxiybiphenyl

The high-yield syntheses of bis [p-(α-methylvinyl)] monomers of benzene, biphenyl, p-terphenyl, and 4,4′-diphenoxybiphenyl are reported. Also described are the syntheses of new bis[p-(α-phenylvinyl)] monomers of biphenyl, p-terphenyl, and 4,4′-diphenoxy-biphenyl. Infrared spectral data for the diolefinic monomers and their precursors are presented, together with brief details for the polymerization of the diolefins by means of free radical and Lewis acid catalysts.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Magnetic heat resistant poly(amide–imide) nanocomposite derived from bisphenol A: Synthesis and properties

New magnetic and heat resistant poly(amide–imide) nanocomposite (PAIN) was prepared from Fe₃O₄ nanoparticles and poly(amide‐imide) (PAI) in a solution of N‐methyl‐2‐pyrrolidone. New PAI derived from bisphenol A containing aryl sulfone and ether moiety was synthesized from 2,2′‐(4,4′‐(4,4′‐(propane‐2,2‐diyl)bis(4,1‐phenylene))bis(oxy)bis(4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid) 5 as a new diacid and 4,4′‐diaminodiphenyl sulfone by direct polycondensation reaction. Fe₃O₄ nanoparticles were prepared by coprecipitation method and characterized using Fourier transform infrared, X‐ray diffraction, scanning electron microscopy (SEM), and vibrating samples magnetometer (VSM). The new poly(amide‐imide)/Fe₃O₄ nanocomposite was characterized using SEM, FTIR, and VSM. The effect of Fe₃O₄ nanoparticles on the thermal properties of PAI was studied using thermogravimetric analysis and differential scanning calorimeter. POLYM. COMPOS., 34:1682–1689, 2013. © 2013 Society of Plastics Engineers     

Synthesis of novel optically active poly(ester imide)s by direct polycondensation reaction promoted by tosyl chloride in pyridine in the presence of N,N‐dimethyformamide

4,4′‐Hexafluoroisopropylidene‐2,2‐bis(phthalic acid anhydride) (1) was treated with L ‐methionine (2) in acetic acid and the resulting 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐methionine) diacid (4) was obtained in high yields. The direct polycondensation reaction of this diacid with several aromatic diols, such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5 d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f), and 2,4′‐dihydroxyacetophenone (5g), was carried out in a system of tosyl chloride (TsCl), pyridine (Py), and N,N‐dimethylformamide (DMF). The reactions with TsCl were significantly promoted by controlling alcoholysis with diols, in the presence of catalytic amounts of DMF, to give a series of optically active poly(ester imide)s, (PEI)s, with good yield and moderate inherent viscosity ranging from 0.43 to 0.67 dL/g. The polycondensation reactions were significantly affected by the amounts of DMF, molar concentration of monomers, TsCl and Py, aging time, temperature, and reaction time. All of the aforementioned polymers were fully characterized by ¹H NMR, FTIR, elemental analysis, and specific rotation. Some structural characterization and physical properties of these optically active PEIs are reported. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 455–460, 2006     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

New photosensitive poly(amid‐imide)s containing chalcone moiety and hydantoin derivatives in the main chain: Synthesis and characterization

Six new poly(amid‐imide)s containing chalchone and hydantoin moieties in the main chain were synthesized through the polycondensation reaction of 1,3‐bis[4,4′‐bis(trimellityimido)phenyl]‐2‐propenone 6 with six hydantoin derivatives 7a‐f in a medium consisting of triphenyl phosphite, calcium chloride, pyridine, and N‐methyl‐2‐pyrrolidone. The polycondensation reaction produced a series of novel poly(amid‐imide)s 8a‐f in high yields with inherent viscosities between 0.26 and 0.42 dL/g. The resulting polymers were characterized by elemental analysis, viscosity measurements, solubility test, thermo gravimetric analysis (TGA and DTG), FTIR, and UV‐Vis spectroscopy. 1,3‐bis[4,4′‐bis(trimellityimido)phenyl]‐2‐propenone 6 was prepared from a three‐step reaction by using 4‐nitro benzaldehyde 1 and 4‐nitro acetophenone 2 as precursors. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of 3,3′-Bis(2,2′,4,4′,6,6′-Hexanitortilbene)

This paper describes the synthesis of 3,3′bis(2,2′,4,4′,6,6′-hexanitrostilbene) (5). Based on the Ullmann reaction we prepared the title compound in nitrobenzene by using 3-chloro 2,2′,4,4′,6,6′-hexanitroztilbene (4) as the starting material and copper powder as the catalyst. (4) was reacted with hydrazine, not to yield a desired product, azo-3,3′bist(2,2′,4,4′,6,6′-hexanitrostilbene.) but to form a well-known explosive, 2,2′,4,4′,6,6′-hexanitrostibene (6). Differential scanning calorimetrical analysis has shown that (5) begins to decompose at the temperature of 298°C.     

Preparation and characterization of new optically active poly(amide‐imide)s derived from N,N‐(4,4′‐Oxydiphthaloyl)‐bis‐(s)‐(+)‐valine diacid chloride and aromatic diamines

4,4′‐Oxydiphthalic anhydride (1) was reacted with (s)‐(+)‐valine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. This compound 3 was converted to diacid chloride 4 by reaction with excess amount of thionyl chloride. The polycondensation reaction of diacid chloride 4 with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d), m‐phenylenediamine (5e), and 4,4′‐diaminobiphenyl (5f) was performed by two conventional methods: low temperature solution polycondensation and a short period reflux conditions. To compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions in the presence of small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 4 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.26–0.44 dL/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FTIR, elemental analyses, and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly (amide‐imide)s are reported. POLYM. ENG. SCI. 46:558–565, 2006. © 2006 Society of Plastics Engineers     

Synthesis and characterization of novel optically active poly(amide‐imide)s

4,4′‐(Hexafluoroisopropylidene)‐bis‐(phthalic anhydride) (1) was reacted with L ‐leucine (2) in toluene solution at refluxing temperature in the presence of triethylamine and the resulting imide‐acid (4) was obtained in quantitative yield. The compound (4) was converted to the diacid chloride (5) by reaction with thionyl chloride. The polymerization reaction of the imide‐acid chloride (5) with 1,6‐hexamethylenediamine (6a) , benzidine (6b) , 4,4′‐diaminodiphenylmethane (6c) , 1,5‐diaminoanthraquinone (6d) , 4,4′‐sulfonyldianiline (6e) , 3,3′‐diaminobenzophenone (6f) , p‐phenylenediamine (6g) and 2,6‐diaminopyridine (6h) was carried out in chloroform/DMAc solution. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of those optically active poly(amide‐imide)s are reported. © 1999 Society of Chemical Industry